These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=C0026803&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
Tribal Manufacturing, Inc. 
450 Leggitt Road
Marshall, MI 49068 
United States 
800-447-9513 
269-781-3901
Visit this company's website

Facility : Marshall, MI

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings* + ˘ § +++ [G]
Brass (3) Places

ASTM F877

Adapter (PEX x Female Sweat)
3/8" x 1/2" [F19E34] 1/2" x 1/2" [F19E44] 3/4" x 1/2" [F19E64] 3/4" x 3/4" [F19E66]
1" x 1" [F19E88]

Adapter (PEX x PB)
3/8" x 3/8" [F18E33] 1/2" x 1/2" [F18E44] 3/4" X 3/4" [F18E66] 1" x 1" [F18E88]

Adapter (PEX x Special Male Sweat)
1/2" x 1/2" [F33E44]

Adapter (PEX x Stub)
3/8" x 1/2" [F03E34] 1/2" x 1/2" [F03E44] 1/2" x 3/4" [F03E46] 3/4" x 3/4" [F03E66]

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [F24E66]

Adapter Assy (PEX x Termination)
1/2" x 3/4" [F24E46]

Adapters (PEX x FPT)
3/8" x 1/8" [F09E31] 3/8" x 1/2" [F09E34] 1/2" x 1/8" [F09E41] 1/2" x 1/2" [F09E44]
1/2" x 3/4" [F09E46] 3/4" x 3/4" [F09E66] 3/4" x 1" [F09E68]

Adapters (PEX x M Sweat)
3/8" x 3/8" [F02E33] 3/8" x 1/2" [F02E34] 1/2" x 3/8" [F02E43] 1/2" x 1/2" [F02E44]
3/4" x 3/4" [F02E66] 1" x 1" [F02E88]

Adapters (PEX x MPT)
3/8" x 3/8" [F10E33] 3/8" x 1/2" [F10E34] 1/2" x 1/2" [F10E44] 1/2" x 3/4" [F10E46]
3/4" x 1/2" [F10E64] 3/4" x 3/4" [F10E66] 1" x 3/4" [F10E86] 1" x 1" [F10E88]

Assembly (PEX x FPT - straight)
3/8" x 1/2" [F04E34] 1/2" X 1/2" [F04E44]

Connectors (PEX x PEX)
3/8" x 3/8" [F01E33] 1/2" x 3/8" [F01E43] 1/2" x 1/2" [F01E44] 3/4" x 1/2" [F01E64]
3/4" x 3/4" [F01E66] 1" x 1/2" [F01E84] 1" x 3/4" [F01E86] 1" x 1" [F01E88]

Elbow (MPT x MPT)
3/8" x 1/2" [F51E34] 1/2" x 1/2" [F51E44]

Elbow (PEX x MPT)
3/8" x 1/4" [F22E32] 3/8" x 3/8" [F22E33] 1/2" x 3/8" [F22E43] 1/2" x 1/2" [F22E44]

Elbow (PEX x PEX)
3/8" x 3/8" [F07E33] 3/8" x 1/2" [F07E34] 1/2" x 1/2" [F07E44] 3/4" x 1/2" [F07E64]
3/4" x 3/4" [F07E66] 1" x 1/2" [F07E84] 1" x 1" [F07E88]

Female Pipe Straight Adapter (PEX x FP)
1" x 1" [F09E88]

Male Pipe Elbow Adapter (PEX x MP)
3/8" x 1/2" [F22E34] 1/2" x 3/4" [F22E46] 3/4" x 3/4" [F22E66]

Male Pipe Straight Adapter (PEX x MP)
3/4" x 1" [F10E68] 1" x 3/4" [F10E86]

Nipple (Female Flare Swivel)
3/8" X 3/8" [F11E33] 1/2" X 1/2" [F11E44]

Plug (PEX)
3/8" [F08E3] 1/2" [F08E4] 3/4" [F08E6] 1" [F08E8]

Swivel Assembly (PEX x Female Flare Swivel)
3/8" x 3/8" [F12E33] 1/2" x 1/2" [F12E44]

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [F06E333] 3/8" x 3/8" x 1/2" [F06E334] 1/2" x 3/8" x 3/8" [F06E433] 1/2" x 3/8" x 1/2" [F06E434]
1/2" x 1/2" x 3/8" [F06E443] 1/2" x 1/2" x 1/2" [F06E444] 1/2" x 1/2" x 3/4" [F06E446] 3/4" x 1/2" x 1/2" [F06E644]
3/4" x 1/2" x 3/4" [F06E646] 3/4" x 3/4" x 3/8" [F06E663] 3/4" x 3/4" x 1/2" [F06E664] 3/4" x 3/4" x 3/4" [F06E666]
1" x 1/2" x 3/4" [F06E846] 1" x 1/2" x 1" [F06E848] 1" x 3/4" x 1/2" [F06E864] 1" x 3/4" x 3/4" [F06E866]
1" x 3/4" x 1" [F06E868] 1" x 1" x 3/4" [F06E886] 1" x 1" x 1" [F06E888]

Tee Adapter (PEX x PEX x MP)
1/2" x 1/2" x 1/2" [F57E444]

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668] 1" x 1" x 3/4" [F06E884]

Termination Elbow (PEX x Termination)
3/8" x 1/2" [F20E34] 1/2" x 1/2" [F20E44]

Termination Elbow Assy (PEX x Termination)
3/8" x 1/2" [F21E34] 1/2" x 1/2" [F21E44] 

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § ** +++ [G]
Brass (3) Places

ASTM F1807

Adapter (PEX x Female Sweat)
3/8" x 1/2" [F19E34] 1/2" x 1/2" [F19E44] 1/2" x 3/4" [F19E46] 3/4" x 1/2" [F19E64]
3/4" x 3/4" [F19E66] 3/4" x 1" [F19E68] 1" x 1" [F19E88]

Adapter (PEX x PB)
3/8" x 3/8" [F18E33] 1/2" x 1/2" [F18E44] 3/4" x 3/4" [F18E66] 1" x 1" [F18E88]

Adapter (PEX x Special Male Sweat)
1/2" x 1/2" [F33E44]

Adapter (PEX x Stub)
3/8" x 1/2" [F03E34] 1/2" x 1/2" [F03E44] 1/2" x 3/4" [F03E46] 3/4" x 3/4" [F03E66]

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [F24E66]

Adapter Assy (PEX x Termination)
1/2" x 3/4" [F24E46]

Adapters (PEX x FPT)
3/8" x 1/8" [F09E31] 3/8" x 1/2" [F09E34] 1/2" x 1/8" [F09E41] 1/2" x 1/2" [F09E44]
1/2" x 3/4" [F09E46] 3/4" x 3/4" [F09E66] 3/4" x 1" [F09E68]

Adapters (PEX x M Sweat)
3/8" x 3/8" [F02E33] 3/8" x 1/2" [F02E34] 1/2" x 3/8" [F02E43] 1/2" x 1/2" [F02E44]
1/2" x 3/4" [F02E46] 3/4" x 1/2" [F02E64] 3/4" x 3/4" [F02E66] 3/4" x 1" [F02E68]
1" x 3/4" [F02E86] 1" x 1" [F02E88]

Adapters (PEX x MPT)
3/8" x 3/8" [F10E33] 3/8" x 1/2" [F10E34] 1/2" x 1/2" [F10E44] 1/2" x 3/4" [F10E46]
3/4" x 1/2" [F10E64] 3/4" x 3/4" [F10E66] 1" x 1" [F10E88]

Connectors (PEX x PEX)
3/8" x 3/8" [F01E33] 1/2" x 3/8" [F01E43] 1/2" x 1/2" [F01E44] 3/4" x 1/2" [F01E64]
3/4" x 3/4" [F01E66] 1" x 1/2" [F01E84] 1" x 3/4" [F01E86] 1" x 1" [F01E88]

Coupler (PEX x PEX)
1" x 1/2" [F01E84]

Elbow (MPT x MPT)
3/8" x 1/2" [F51E34] 1/2" x 1/2" [F51E44]

Elbow (PEX x Barb x Female Sweat)
3/4" x 3/4" [F15E66]

Elbow (PEX x Barb x Male Sweat)
3/4" x 3/4" [F14E66]

Elbow (PEX x MPT)
3/8" x 1/4" [F22E32] 3/8" x 3/8" [F22E33] 1/2" x 3/8" [F22E43] 1/2" x 1/2" [F22E44]

Elbow (PEX x PEX)
3/8" x 3/8" [F07E33] 3/8" x 1/2" [F07E34] 1/2" x 1/2" [F07E44] 3/4" x 1/2" [F07E64]
3/4" x 3/4" [F07E66] 1" x 1/2" [F07E84] 1" x 3/4" [F07E86] 1" x 1" [F07E88]

Nipple (Female Flare Swivel)
3/8" x 3/8" [F11E33] 1/2" x 1/2" [F11E44]

Plug (PEX)
3/8" [F08E3] 1/2" [F08E4] 3/4" [F08E6] 1" [F08E8]

Swivel Assembly (PEX x FPT - Straight)
3/8" x 1/2" [F04E34] 1/2" x 1/2" [F04E44]

Swivel Assembly (PEX x Female Flare Swivel)
3/8" x 3/8" [F12E33] 1/2" x 1/2" [F12E44]

Tee (PEX X PEX X Female NPT)
1/2" x 1/2" x 1/8" [F65E441]

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [F06E333] 3/8" x 3/8" x 1/2" [F06E334] 1/2" x 3/8" x 3/8" [F06E433] 1/2" x 1/2" x 3/8" [F06E443]
1/2" x 1/2" x 1/2" [F06E444] 1/2" x 1/2" x 3/4" [F06E446] 3/4" x 1/2" x 1/2" [F06E644] 3/4" x 1/2" x 3/4" [F06E646]
3/4" x 3/4" x 3/8" [F06E663] 3/4" x 3/4" x 1/2" [F06E664] 3/4" x 3/4" x 3/4" [F06E666] 3/4" x 3/4" x 1" [F06E846]
1" x 1/2" x 1" [F06E848) 1" x 3/4" x 1/2" [F06E864] 1" x 3/4" x 3/4" [F06E866] 1" x 1" x 1/2" [F06E868]
1" x 1" x 3/4" [F06E886] 1" x 1" x 1" [F06E888]

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668] 1" x 1" x 3/4" [F06E884]

Termination Elbow (PEX x Termination)
3/8" x 1/2" [F20E34] 1/2" x 1/2" [F20E44]

Termination Elbow Assy (PEX x Termination)
3/8" x 1/2" [F21E34] 1/2" x 1/2" [F21E44] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
   F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
   from bearing the NSF Mark.  The NSF Mark will appear on the box containing
   the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings§ +++ [G]
MLTPL

ASTM F1960

Adapter (PEX x Female NPT)
1/2" x 3/4" [F112E44] 1/2" x 3/4" [F112E46] 5/8" x 3/4" [F112E56] 3/4" x 1/2" [F112E64]
3/4" x 3/4" [F112E66] 3/4" x 1" [F112E68] 1" x 3/4" [F112E86] 1" x 1" [F112E88]
1 1/4" x 1 1/4" [F112E1010] 1 1/2" x 1 1/2" [F112E1212] 2" x 2" [F112E1616]

Adapter (PEX x Female Sweat CU)
3/8" x 1/2" [F105E34] 1/2" x 1/2" [F105E44] 1/2" x 3/4" [F105E46] 5/8" x 1/2" [F105E54]
5/8" x 3/4" [F105E56] 3/4" x 1/2" [F105E64] 3/4" x 3/4" [F105E66] 3/4" x 1" [F105E68]
1" x 1" [F105E88] 1 1/4" x 1 1/4" [F105E1010] 1 1/2" x 1 1/2" [F105E1212] 2" x 2" [F105E1616]

Adapter (PEX x Male CU)
3/8" x 1/2" [F80E34] 1/2" x 1/2" [F80E44] 1/2" x 3/4" [F80E46] 5/8" x 1/2" [F80E54]
5/8" x 3/4" [F80E56] 3/4" x 1/2" [F80E64] 3/4" x 3/4" [F80E66] 3/4" x 1" [F80E68]
1" x 1" [F80E88] 1 1/4" x 1 1/4" [F80E1010] 1 1/4" x 1 1/4" [F88E1010] 1 1/2" x 1 1/2" [F80E1212]
1 1/2" x 1 1/2" [F88E1212] 2" x 2" [F80E1616] 2" x 2" [F88E1616]

Coupling
3/8" x 3/8" [F87E33] 3/8" x 1/2" [F87E43] 1/2" x 1/2" [F87E44] 5/8" x 5/8" [F87E55]
1/2" x 3/4" [F87E64] 3/4" x 3/4" [F87E66] 3/4" x 1" [F87E86] 1" x 1" [F87E88]
2" x 2" [F87E1616]

Elbow (PEX x F Sweat)
3/4" x 3/4" [F315E66]

Elbow (PEX x M Sweat)
3/4" x 3/4" [F314E66]

Elbow (PEX x MNPT)
1/2" x 1/2" [F322E44]

Elbow (PEX x PEX)
1/2" x 1/2" [F307E44] 3/4" x 3/4" [F307E66] 1" x 1" [F307E88]

Male Pipe Adapter
3/8" x 1/2" [F88E34] 1/2" x 1/2" [F88E44] 1/2" x 3/4" [F88E46] 5/8" x 3/4" [F88E56]
3/4" x 1/2" [F88E64] 3/4" x 3/4" [F88E66] 3/4" x 1" [F88E68] 1" x 3/4" [F88E86]
1" x 1" [F88E88]

PEX-PB Transition
1/2" x 1/2" [F107E44] 3/4" x 3/4" [F107E66]

PEX-PE Transition
1" x 3/4" [F111E86] 1" x 1" [F111E88]

PEX-R20 Thread Adapter
3/4" x 3/4" [F131E66]

Plug (PEX)
3/8" [F106E3] 1/2" [F106E4] 3/4" [F106E6] 1" [F106E8]

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 1/2" [F306E444] 1/2" x 1/2" x 3/4" [F306E446] 3/4" x 1/2" x 1/2" [F306E644] 3/4" x 1/2" x 3/4" [F306E646]
3/4" x 3/4" x 1/2" [F306E664] 3/4" x 3/4" x 3/4" [F306E666] 3/4" x 3/4" x 1" [F306E668] 1" x 3/4" x 3/4" [F306E866]
1" x 1" x 1/2" [F306E884] 1" x 1" x 3/4" [F306E886] 1" x 1" x 1" [F306E888] 

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ ˘ § ± [G]
MLTPL

ASTM F1960

Adapter (PEX x Faucet)
3/8" (F108E3) 1/2" (F108E4) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
± These fittings are NSF Certified faucet components.  The assembly of components does not
  constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
  the assembled faucet appears in NSF Listing.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § ** +++ [G]
Brass (3) Places

CSA B137.5

Adapter (PEX x Female Sweat)
3/8" x 1/2" [F19E34] 1/2" x 1/2" [F19E44] 1/2" x 3/4" [F19E46] 3/4" x 1/2" [F19E64]
3/4" x 3/4" [F19E66] 3/4" x 1" [F19E68] 1" x 1" [F19E88]

Adapter (PEX x PB)
3/8" x 3/8" [F18E33] 1/2" x 1/2" [F18E44] 3/4" X 3/4" [F18E66] 1" x 1" [F18E88]

Adapter (PEX x Special Male Sweat)
1/2" x 1/2" [F33E44]

Adapter (PEX x Stub)
3/8" x 1/2" [F03E34] 1/2" x 1/2" [F03E44] 1/2" x 3/4" [F03E46] 3/4" x 3/4" [F03E66]

Adapter Assy (PEX x FPT Swivel)
3/4" x 3/4" [F24E66]

Adapter Assy (PEX x Termination)
1/2" x 3/4" [F24E46]

Adapters (PEX x FPT)
3/8" x 1/8" [F09E31] 3/8" x 1/2" [F09E34] 1/2" x 1/8" [F09E41] 1/2" x 1/2" [F09E44]
1/2" x 3/4" [F09E46] 3/4" x 1/2" [F09E68] 3/4" x 3/4" [F09E66]

Adapters (PEX x M Sweat)
3/8" x 3/8" [F02E33] 3/8" x 1/2" [F02E34] 1/2" x 3/8" [F02E43] 1/2" x 1/2" [F02E44]
1/2" x 3/4" [F02E46] 3/4" x 1/2" [F02E64] 3/4" x 3/4" [F02E66] 3/4" x 1" [F02E68]
1" x 3/4" [F02E86] 1" x 1" [F02E88]

Adapters (PEX x MPT)
3/8" x 3/8" [F10E33] 3/8" x 1/2" [F10E34] 1/2" x 1/2" [F10E44] 1/2" x 3/4" [F10E46]
3/4" x 1/2" [F10E64] 3/4" x 3/4" [F10E66] 1" x 1" [F10E88]

Connectors (PEX x PEX)
3/8" x 3/8" [F01E33] 1/2" x 3/8" [F01E43] 1/2" x 1/2" [F01E44] 3/4" x 1/2" [F01E64]
3/4" x 3/4" [F01E66] 1" x 3/4" [F01E86] 1" x 1/2" [F01E84] 1" x 1" [F01E88]

Coupler (PEX x PEX)
1" x 1/2" [F01E84]

Elbow (MPT x MPT)
3/8" x 1/2" [F51E34] 1/2" x 1/2" [F51E44]

Elbow (PEX x MPT)
3/8" x 3/8" [F22E33] 3/8" x 1/4" [F22E32] 1/2" x 3/8" [F22E43] 1/2" x 1/2" [F22E44]

Elbow (PEX x PEX)
3/8" x 3/8" [F07E33] 3/8" x 1/2" [F07E34] 1/2" x 1/2" [F07E44] 3/4" x 1/2" [F07E64]
3/4" x 3/4" [F07E66] 1" x 1/2" [F07E84] 1" x 3/4" [F07E86] 1" x 1" [F07E88]

Female Pipe Straight Adapter (PEX x FP)
1" x 1" [F09E88]

Male Pipe Straight Adapter (PEX x MP)
3/4" x 1" [F10E68] 1" x 3/4" [F10E86]

Nipple (Female Flare Swivel)
3/8" x 3/8" [F11E33] 1/2" x 1/2" [F11E44]

Plug (PEX)
3/8" [F08E3] 1/2" [F08E4] 3/4" [F08E6] 1" [F08E8]

Swivel Assembly (PEX x FPT - Straight)
3/8" x 1/2" [F04E34] 1/2" x 1/2" [F04E44]

Swivel Assembly (PEX x Female Flare Swivel)
3/8" x 3/8" [F12E33] 1/2" x 1/2" [F12E44]

Tee (PEX x PEX x Female NPT)
1/2" x 1/2" x 1/8" [F65E441]

Tee (PEX x PEX x PEX)
3/8" x 3/8" x 3/8" [F06E333] 3/8" x 3/8" x 1/2" [F06E334] 1/2" x 3/8" x 3/8" [F06E433] 1/2" x 3/8" x 1/2" [F06E434]
1/2" x 1/2" x 3/8" [F06E443] 1/2" x 1/2" x 1/2" [F06E444] 1/2" x 1/2" x 3/4" [F06E446] 3/4" x 1/2" x 1/2" [F06E644]
3/4" x 1/2" x 3/4" [F06E646] 3/4" x 3/4" x 3/8" [F06E663] 3/4" x 3/4" x 1/2" [F06E846] 3/4" x 3/4" x 3/4" [F06E666]
3/4" x 3/4" x 1" [F06E668] 1" x 1/2" x 3/4" [F06E846] 1" x 1/2" x 1" [F06E848] 1" x 3/4" x 1/2" [F06E864]
1" x 3/4" x 3/4" [F06E866] 1" x 1" x 1/2" [F06E868] 1" x 1" x 3/4" [F06E886] 1" x 1" x 1" [F06E888]

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668] 1" x 1" x 3/4" [F06E884]

Termination Elbow (PEX x Termination)
3/8" x 1/2" [F20E34] 1/2" x 1/2" [F20E44]

Termination Elbow Assy (PEX x Termination)
3/8" x 1/2" [F21E34] 1/2" x 1/2" [F21E44] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
   F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
   from bearing the NSF Mark.  The NSF Mark will appear on the box containing
   the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ ˘ § ± [G]
MLTPL

CSA B137.5

Adapter (PEX x Faucet)
3/8" (F108E3) 1/2" (F108E4) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
± These fittings are NSF Certified faucet components.  The assembly of components does not
  constitute a NSF Certified faucet.  Complete faucet assemblies are NSF Certified only if
  the assembled faucet appears in NSF Listing.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
MLTPL

ASTM F877

Branch Reducing Tees
3/4" x 3/4" x 1/2" [F208E664] 1" x 1" x 1/2" [F208E884] 1" x 1" x 3/4" [F208E886] 1 1/4" x 1 1/4" x 3/4" [F208E10106]
1 1/4" x 1 1/4" x 1" [F208E10108] 1 1/2" x 1 1/2" x 1" [F208E12128] 1 1/2" x 1 1/2" x 1 1/4" [F208E121210] 2" x 2" x 1" [F208E16168]
2" x 2" x 1 1/4" [F208E161610] 2" x 2" x 1 1/2" [F208E161612]

Branch and Run Red Tees
3/4" x 1/2" x 1/2" [F208E644] 1" x 3/4" x 3/4" [F208E866] 1 1/4" x 3/4" x 1" [F208E1068] 1 1/4" x 1" x 1" [F208E1088]
1 1/2" x 3/4" x 1" [F208E1268] 1 1/2" x 1" x 1" [F208E1288] 1 1/2" x 1 1/4" x 1" [F208E12108] 1 1/2" x 1 1/4" x 1 1/4" [F208E121010]
2" x 1 1/2" x 1" [F208E16128] 2" x 1 1/2" x 1 1/4" [F208E161210] 2" x 1 1/4" x 1 1/4" [F208E161010] 2" x 1 1/2" x 1 1/2" [F208E161212]

Bullhead Tees
1/2" x 1/2" x 3/4" [F208E446] 3/4" x 3/4" x 1" [F208E668]

Copper Adapters
1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) [F97E43] 1/2" x 1/2" F2080 C Female (Sweat) [F98E44] 5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E58] 3/4" x 1" F2080 C Female (Sweat) [F98E68]
3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) [F97E66] 3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E68] 1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [F97E88] 1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [F97E810]
1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [F97E1010] 1 1/4" x 1 1/2" F2080 C Male (Street) or 1 1/4" C Female (Sweat) [F97E1012] 1 1/2" x 1 1/2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1212] 1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1216]
2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [F97E1616] 2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) [F97E1620]

Couplings
3/8" x 3/8" [F95B33]E 1/2" x 1/2" [F95E44] 3/4" x 3/4" [F95E66] 5/8" X 5/8" [F95E55]
1" x 1" [F95E88] 1 1/4" x 1 1/4" [F95E1010] 1 1/2" x 1 1/2" [F95E1212] 2" x 2" [F95E1616]

Drop Ear Elbow - ELOC Dual MPT/Copper
1/2" x 1/2" MPT or 1/2" C Female [F210E44] 3/4" x 3/4" MPT or 1/2" C Female [F210E66]

Drop Ear Elbow - ELOC to FPT
1/2" x 1/2" [F212E44] 3/4" x 3/4" [F212E66] 1" x 1" [F212E88]

Dual MPT/Copper Adapters
3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E34] 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E44] 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [F96E54] 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) [F96E66]
1" F2080 x 1" MPT or 3/4" C Female (Sweat) [F96E88] 1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) [F96E1010] 1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) [F96E1212] 2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) [F96E1616]

Elbow - ELOC to Copper (Male or Female)
1/2" x 1/2" C Male or 3/8" C Female [F215E44] 1/2" x 3/4" C Female [F215E46] 1/2" x 3/4" C Male or 1/2" C Female [F215E46] 3/4" x 1" C Male or 3/4" C Female [F215E68]
3/4" x 3/4" C Male or 1/2" C Female [F215E66]

Elbows
1/2" x 1/2" [F209E44] 3/4" x 3/4" [F209E66] 1" x 1" [F209E88] 1 1/4" x 1 1/4" [F209E10]
1 1/2" x 1 1/2" [F209E12] 2" x 2" [F209E16]

Female Adapters
1/2" F2080 x 1/2" FPT [F99E44] 3/4" F2080 x 3/4" FPT [F99E66] 1" F2080 x 1" FPT [F99E88]

Female Swivel Adapters
1/2" F2080 x 1/2" NPS Female Swivel [F94E44] 3/4" F2080 x 3/4" NPS Female Swivel [F94E66]

Plugs
1/2" [F103E4] 3/4" [F103E6] 1" [F103E8] 1 1/4" [F103E10]

Reducing Couplings
3/4" x 1/2" [F95E64] 1" x 3/4" [F95E86] 1 1/4" x 1" [F95E108] 1 1/2" x 1" [F95E128]
1 1/2" x 1 1/4" [F95E1210] 2" x 1" [F95E168] 2" x 1 1/4" [F95E1610] 2" x 1 1/2" [F95E1612]

Run Reducing Tees
1 1/2" x 1 1/4" x 1 1/2" [F208E121012] 2" x 1 1/4" x 2" [F208E161016] 1 1/4" x 1" x 1 1/4" [F208E10810] 2" x 1/2" x 2" [F208E161216]
1 1/2" x 1" x 1 1/2" [F208E12812] 1" x 3/4" x 1" [F208E868] 3/4" x 1/2" x 3/4" [F208E646]

Straight Tees
1/2" x 1/2" x 1/2" [F208E444] 3/4" x 3/4" x 3/4" [F208E666] 1" x 1" x 1" [F208E888] 1 1/4" x 1 1/4" x 1 1/4" [F208E10]
1 1/2" x 1 1/2" x 1 1/2" [F208E12] 2" x 2" x 2" [F208E16] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
MLTPL

CSA B137.5

Adapter (PEX x Female NPT)
1/2" x 3/4" [F112E44] 1/2" x 3/4" [F112E46] 5/8" x 3/4" [F112E56] 3/4" x 1/2" [f112E64]
3/4" x 3/4" [F112E66] 3/4" x 1" [F112E68] 1" x 3/4" [F112E86] 1" x 1" [F112E88]
1 1/4" x 1 1/4" [F112E1010] 1 1/2" x 1 1/2" [F112E1212] 2" x 2" [F112E1616]

Adapter (PEX x Female Sweat CU)
3/8" x 1/2" [F105E34] 1/2" x 1/2" [F105E44] 1/2" x 3/4" [F105E46] 5/8" x 1/2" [F105E54]
5/8" x 3/4" [F105E56] 3/4" x 1/2" [F105E64] 3/4" x 3/4" [F105E66] 3/4" x 1" [F105E68]
1" x 1" [F105E88] 1 1/4" x 1 1/4" [F105E1010] 1 1/2" x 1 1/2" [F105E1212] 2" x 2" [F105E1616]

Adapter (PEX x Male CU)
3/8" x 1/2" [F80E34] 1/2" x 1/2" [F80E44] 1/2" x 3/4" [F80E46] 5/8" x 1/2" [F80E54]
5/8" x 3/4" [F80E56] 3/4" x 1/2" [F80E64] 3/4" x 3/4" [F80E66] 3/4" x 1" [F80E68]
1" x 1" [F80E88] 1 1/4" x 1 1/4" [F80E1010] 1 1/4" x 1 1/4" [F88E1010] 1 1/2" x 1 1/2" [F80E1212]
1 1/2" x 1 1/2" [F88E1212] 2" x 2" [F80E1616] 2" x 2" [F88E1616]

Coupling
3/8" x 3/8" [F87E33] 3/8" x 1/2" [F87E43] 1/2" x 1/2" [F87E44] 5/8" x 5/8" [F87E55]
1/2" x 3/4" [F87E64] 3/4" x 3/4" [F87E66] 3/4" x 1" [F87E66] 1" x 1" [F87E88]
2" x 2" [F87E1616]

Elbow (PEX x F Sweat)
3/4" x 3/4" [F315E66]

Elbow (PEX x M Sweat)
3/4" x 3/4" [F314E66]

Elbow (PEX x MNPT)
1/2" x 1/2" [F322E44]

Elbow (PEX x PEX)
1/2" x 1/2" [F307E44] 3/4" x 3/4" [F307E66] 1" x 1" [F307E88]

Male Pipe Adapter
3/8" x 1/2" [F88E34] 1/2" x 1/2" [F88E44] 1/2" x 3/4" [F88E46] 5/8" x 3/4" [F88E56]
3/4" x 1/2" [F88E64] 3/4" x 3/4" [F88E66] 3/4" x 1" [F88E68] 1" x 3/4" [F88E86]
1" x 1" [F88E88]

PEX-PB Transition
1/2" x 1/2" [F107E44] 3/4" x 3/4" [F107E66]

PEX-PE Transition
1" x 3/4" [F111E86] 1" x 1" [F111E88]

PEX-R20 Thread Adapter
3/4" x 3/4" [F131E66]

Plug (PEX)
3/8" [F106E3] 1/2" [F106E4] 3/4" [F106E6] 1" [F106E8]

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 1/2" [F306E444] 1/2" x 1/2" x 3/4" [F306E446] 3/4" x 1/2" x 1/2" [F306E644] 3/4" x 1/2" x 3/4" [F306E646]
3/4" x 3/4" x 1/2" [F306E664] 3/4" x 3/4" x 3/4" [F306E666] 3/4" x 3/4" x 1" [F306E668] 1" x 3/4" x 3/4" [F306E866]
1" x 1" x 1/2" [F306E884] 1" x 1" x 3/4" [F306E886] 1" x 1" x 1" [F306E888] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings^ ˘ § +++ [G]
MLTPL

CSA B137.5

Copper Adapters
1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) (F97E43) 1/2" x 1/2" F2080 C Female (Sweat) (F98E44) 5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (F97E58) 3/4" x 1" F2080 C Female (Sweat) (F98E68)
3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) (F97E66) 3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (F97E68) 1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) (F97E88) 1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) (F97E810)
1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) (F97E1010) 1 1/4" x 1 1/2" F2080 C Male (Street) or 1 1/4" C Female (Sweat) (F97E1012) 1 1/2" x 1 1/2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (F97E1212) 1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (F97E1216)
2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) (F97E1616) 2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) (F97E1620)

Couplings
3/8" x 3/8" (F95E33) 1/2" x 1/2" (F95E44) 3/4" x 3/4" (F95E66) 5/8" X 5/8" (F95E55)
1" x 1" (F95E88) 1 1/4" x 1 1/4" (F95E1010) 1 1/2" x 1 1/2" (F95E1212) 2" x 2" (F95E1616)

Dual MPT/Copper Adapters
3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) (F96E34) 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) (F96E44) 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) (F96E54) 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) (F96E66)
1" F2080 x 1" MPT or 3/4" C Female (Sweat) (F96E88) 1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) (F96E1010) 1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) (F96E1212) 2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) (F96E1616)

Female Adapters
1/2" F2080 x 1/2" FPT (F99E44) 3/4" F2080 x 3/4" FPT (F99E66) 1" F2080 x 1" FPT (F99E88)

Female Swivel Adapters
1/2" F2080 x 1/2" NPS Female Swivel (F94E44) 3/4" F2080 x 3/4" NPS Female Swivel (F94E66)

Plugs
1/2" (F103E4) 3/4" (F103E6) 1" (F103E8) 1 1/4" (F103E10)

Reducing Couplings
3/4" x 1/2" (F95E64) 1" x 3/4" (F95E86) 1 1/4" x 1" (F95E108) 1 1/2" x 1" (F95E128)
1 1/2" x 1 1/4" (F95E1210) 2" x 1" (F95E168) 2" x 1 1/4" (F95E1610) 2" x 1 1/2" (F95E1612) 

^ The E can be substituted with an B in the model designations.  Only E model designations
  comply with Annex G Listed under Potable Water.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++
Brass (3) Places
SWIVEL DROP EAR
ASTM F877

Elbow[G]
1/2" x 1/2" [F82E44] 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings§ +++
Brass
Failsafe Plus
ASTM F2434

Adapter[G]
1/2" x 1/2" [FP01E44] 3/4" x 3/4" [FP01E66] 1" x 3/4" [FP01E86] 1" x 1" [FP01E88]
1 1/4" x 1" [FP01E108] 1 1/4" x 1 1/4" [FP01E1010]

Assembly Adapter[G]
3/4" x 3/4" [FP10E66] 1/2" x 1/2" [FP10E44] 1" x 1" [FP10E88] 1 1/4" x 1 1/4" [FP10E1010]

Assembly Adapter Elbow (Pex-Al-Pex)[G]
3/4" x 1/2" [FP07E64] 1 1/4" x 1 1/4" [FP07E1010]

Assembly Adapter Pipe Thread (Pex-Al-Pex x Female)[G]
1/2" x 1/2" [FP09E44] 1 1/4" x 3/4" [FP09E106]

Assembly Adapter Pipe Thread (Pex-Al-Pex x Male)[G]
1 1/4" x 1" [FP09E108]

Assembly Adapter Plug (Pex-Al-Pex)[G]
1 1/4" [FP08E10]

Assembly Adapter Sweat (Pex-Al-Pex x FSWT)[G]
1/2" x 1/2" [FP19E44] 1/2" x 3/4" [FP19E46] 3/4" x 3/4" [FP19E66] 1" x 1" [FP19E88]

Assembly Adapter Sweat (Pex-Al-Pex x MSWT)[G]
1/2" x 1/2" [FP02E44] 1/2" x 3/4" [FP02E46] 3/4" x 3/4" [FP02E66] 1" x 1" [FP02E88]
1 1/4" x 1" [FP02E108] 1 1/4" x 1 1/4" [FP02E1010]

Assembly Adapter Sweat Elbow (Pex-Al-Pex x FSWT)[G]
1/2" x 1/2" [FP36E44] 1/2" x 3/4" [FP36E46] 3/4" x 3/4" [FP36E66]

Assembly Adapter Sweat Elbow (Pex-Al-Pex x MSWT)[G]
1/2" x 1/2" [FP37E44] 1/2" x 3/4" [FP37E46] 3/4" x 3/4" [FP37E66]

Assembly Elbow[G]
1/2" x 1/2" [FP07E44] 3/4" x 3/4" [FP07E66] 1" x 1" [FP07E88]

Assembly Tee (Pex-Al-Pex)[G]
1/2" x 1/2" x 1/2" [FP06E444] 1/2" x 1/2" x 3/4" [FP06E446] 3/4" x 1/2" x 1/2" [FP06E644] 3/4" x 1/2" x 3/4" [FP06E646]
3/4" x 3/4" x 1/2" [FP06E664] 3/4" x 3/4" x 3/4" [FP06E666] 1" x 3/4" x 3/4" [FP06E886] 1" x 1" x 1/2" [FP06E884]
1" x 1" x 3/4" [FP06E886] 1" x 1" x 1" [FP06E888] 1 1/4" x 1" x 1" [FP06E1088] 1 1/4" x 1 1/4" x 1/2" [FP06E10104]
1 1/4" x 1 1/4" x 3/4" [FP06E10106] 1 1/4" x 1 1/4" x 1" [FP06E10108] 1 1/4" x 1 1/4" x 1 1/4" [FP06E101010] 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings˘ § +++
Brass
Failsafe Plus
CSA B137.5

Adapter[G]
1/2" x 1/2" [FP01E44] 3/4" x 3/4" [FP01E66] 1" x 3/4" [FP01E86] 1 " x 1" [FP01E88]
1 1/4" x 1" [FP01E108] 1 1/4" x 1 1/4" [FP01E1010]

Assembly Adapter[G]
1/2" x 1/2" [FP10E44] 3/4" x 3/4" [FP10E66] 1" x 1" [FP10E88] 1 1/4" x 1 1/4" [FP10E1010]

Assembly Adapter Elbow (Pex-Al-Pex)[G]
3/4" x 1/2" [FP07E64] 1 1/4" x 1 1/4" [FP07E1010]

Assembly Adapter Pipe Thread (Pex-Al-Pex x Female)[G]
1/2" x 1/2" [FP09E44] 1 1/4" x 3/4" [FP09E106]

Assembly Adapter Pipe Thread (Pex-Al-Pex x Male)[G]
1 1/4" x 1" [FP09E108]

Assembly Adapter Plug (Pex-Al-Pex)[G]
1 1/4" [FP08E10]

Assembly Adapter Sweat (Pex-Al-Pex FSWT)[G]
1/2" x 1/2" [FP19E44] 1/2" x 3/4" [FP19E46] 3/4" x 3/4" [FP19E66] 1" x 1" [FP19E88]

Assembly Adapter Sweat (Pex-Al-Pex MSWT)[G]
1/2" x 1/2" [FP02E44] 1/2" x 3/4" [FP02E46] 3/4" X 3/4" [FP02E66] 1" x 1" [FP02E88]
1 1/4" x 1" [FP02E108] 1 1/4" x 1 1/4" [FP02E1010]

Assembly Adapter Sweat Elbow (Pex-Al-Pex FSWT)[G]
1/2" x 1/2" [FP36E44] 1/2" x 3/4" [FP36E46] 3/4" x 3/4" [FP36E66]

Assembly Adapter Sweat Elbow (Pex-Al-Pex MSWT)[G]
1/2" x 1/2" [FP37E44] 1/2" x 3/4" [FP37E46] 3/4" x 3/4" [FP37E66]

Assembly Elbow[G]
1/2" x 1/2" [FP07E44] 3/4" x 3/4" [FP07E66] 1" x 1" [FP07E88]

Assembly Tee (Pex-Al-Pex)[G]
1/2" x 1/2" x 1/2" [FP06E444] 1/2" x 1/2" x 3/4" [FP06E446] 3/4" x 1/2" x 1/2" [FP06E644] 3/4" x 1/2" x 3/4" [FP06E646]
3/4" x 3/4" x 1/2" [FP06E664] 3/4" x 3/4" x 3/4" [FP06E666] 1" x 3/4" x 3/4" [FP06E886] 1" x 1" x 1/2" [FP06E884]
1" x 1" x 3/4" [FP06E886] 1" x 1" x 1" [FP06E888] 1 1/4" x 1" x 1" [FP06E1088] 1 1/4" x 1 1/4" x 1/2" [FP06E10104]
1 1/4" x 1 1/4" x 3/4" [FP06E10106] 1 1/4" x 1 1/4" x 1" [FP06E10108] 1 1/4" x 1 1/4" x 1 1/4" [FP06E101010] 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings˘ § +++ [G]
MLTPL
Failsafe Compression
ASTM F1974

Adapter, Plug
1/2" [F141E4] 3/4" [F141E6]

Barb x Barb Coupler
1/2" T1 x 1/2" T1 [F144E44] 3/4" T1 x 1/2" T1 [F144E64] 3/4" T1 x 3/4" T1 [F144E66]

Barb x Copper Compression Adapter
1/2" T1 x 1/2" [F143E44] 3/4" T1 x 3/4" [F143E66] 1" T1 x 1" [F143E88]

Barb x Female Adapter
1/2" T1 x 1/2" FSW [F138E44] 3/4" T1 x 3/4" FSW [F138E66]

Barb x MPT Adapter
1/2" T1 x 1/2" [F142E44] 1/2" T1 x 3/4" [F142E46] 3/4" T1 x 3/4" [F142E66]

Barb x Male Adapter
1/2" T1 x 1/2" MSWT [F145E44] 3/4" T1 x 3/4" MSWT [F145E66] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
MLTPL
Failsafe Compression
CSA B137.10

Adapter, Plug
1/2" [F141E4] 3/4" [F141E6]

Barb x Barb Coupler
1/2" T1 x 1/2" T1 [F144E44] 3/4" T1 x 1/2" T1 [F144E64] 3/4" T1 x 3/4" T1 [F144E66]

Barb x Copper Compression Adapter
1/2" T1 x 1/2" [F143E44] 3/4" T1 x 3/4" [F143E66]

Barb x Female Adapter
1/2" T1 x 1/2" FSW [F138E44] 3/4" T1 x 3/4" FSW [F138E66]

Barb x MPT Adapter
1/2" T1 x 1/2" [F142E44] 1/2" T1 x 3/4" [F142E46] 3/4" T1 x 3/4" [F142E66]

Barb x Male Adapter
1/2" T1 x 1/2" MSWT [F145E44] 3/4" T1 x 3/4" MSWT [F145E66] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
MLTPL

ASTM F1974

Adapter, Plug
1/2" [F141E4] 3/4" [F141E6]

Barb x Barb Coupler
1/2" T1 x 1/2" T1 [F144E44] 3/4" T1 x 1/2" T1 [F144E64] 3/4" T1 x 3/4" T1 [F144E66]

Barb x Copper Compression Adapter
1/2" T1 x 1/2" [F143E44] 3/4" T1 x 3/4" [F143E66]

Barb x Female Adapter
1/2" T1 x 1/2" FSW [F138E44] 3/4" T1 x 3/4" FSW [F138E66]

Barb x MPT Adapter
1/2" T1 x 1/2" [F142E44] 1/2" T1 x 3/4" [F142E46] 3/4" T1 x 3/4" [F142E66]

Barb x Male Adapter
1/2" T1 x 1/2" MSWT [F145E44] 3/4" T1 x 3/4" MSWT [F145E66] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
MLTPL

CSA B137.10

Adapter, Plug
1/2" [F141E4] 3/4" [F141E6]

Barb x Barb Coupler
1/2" T1 x 1/2" T1 [F144E44] 3/4" T1 x 1/2" T1 [F144E64] 3/4" T1 x 3/4" T1 [F144E66]

Barb x Copper Compression Adapter
1/2" T1 x 1/2" [F143E44] 3/4" T1 x 3/4" [F143E66]

Barb x Female Adapter
1/2" T1 x 1/2" FSW [F138E44] 3/4" T1 x 3/4" FSW [F438E66]

Barb x MPT Adapter
1/2" T1 x 1/2" [F142E44] 1/2" T1 x 3/4" [F142E46] 3/4" T1 x 3/4" [F142E66]

Barb x Male Adapter
1/2" T1 x 1/2" MSWT [F145E44] 3/4" T1 x 3/4" MSWT [F145E66] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Misc. Proc. Devices/Comp.@ ˘ § ++ [G]
Brass

ASTM F1960

Adapter (PEX x Manifold)
3/8" [F104E34] 1/2" [F104E44] 

@ Certified as a component of a manifold with a maximum of 24 adapters per liter.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
Brass
Rehau Everloc®
ASTM F877/F2080

Branch & Red Run Tee
3/4" x 1/2" x 1/2" (260637-101) 1" x 3/4" x 3/4" (260697-101) 1 1/4" x 3/4" x 1" (235677-101) 1 1/4" x 1" x 1" (235657-101)
1 1/2" x 3/4" x 1" (235887-101) 1 1/2" x 1" x 1" (235877-101) 1 1/2" x 1 1/4" x 1" (235867-101) 1 1/2" x 1 1/4" x 1 1/4" (235857-101
2" x 1 1/4" x 1 1/4" (236097-101) 2" x 1 1/2" x 1" (236087-101) 2" x 1 1/2" x 1 1/4" (236077-101) 2" x 1 1/2" x 1 1/2" (236067-101)

Branch Reducing Tee
3/4" x 3/4" x 1/2" (260627-101) 1" x 1" x 1/2" (260727-101) 1" x 1" x 3/4" (260707-101) 1 1/4" x 1 1/4" x 3/4" (235627-101)
1 1/4" x 1 1/4" 1" (235617-101) 1 1/2" x 1 1/2" x 1" (235827-101) 1 1/2" x 1 1/2" x 1 1/4" (235817-101) 2" x 2" x 1" (236037-101)
2" x 2" x 1 1/4" (236027-101) 2" x 2" x 1 1/2" (236017-101)

Bullhead Tee
1/2" x 1/2" x 3/4" (260857-101) 3/4" x 3/4" x 1" (260897-101)

Copper Adapters
1/2" x 3/8" F2080 C Female (Sweat) or 1/2" C Male (Street) [260017-101] 1/2" x 1/2" F2080 C Female (Sweat) [260047-101] 5/8" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [243637-101] 3/4" x 1" F2080 C Female (Sweat) [260807-101]
3/4" x 3/4" F2080 C Male (Street) or 1/2" C Female (Sweat) [260827-101] 3/4" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [260837-101] 1" x 1" F2080 C Male (Street) or 3/4" C Female (Sweat) [260417-101] 1" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [260947-101]
1 1/4" x 1 1/4" F2080 C Male (Street) or 1" C Female (Sweat) [235567-101] 1 1/4" x 1 1/2" F2080 C Male (Street) or 1 1/4" C Female (Sweat) [235577-101] 1 1/2" x 1 1/2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [235767-101] 1 1/2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [235777-101]
2" x 2" F2080 C Male (Street) or 1 1/2" C Female (Sweat) [235967-101] 2" x 2 1/2" F2080 C Male (Street) or 2" C Female (Sweat) [235977-101]

Couplings
3/8" x 3/8" [24317-101] 1/2" x 1/2" [260227-101] 3/4" x 3/4" [260317-101] 5/8" X 5/8" [243627-101]
1" x 1" [260427-101] 1 1/4" x 1 1/4" [235527-101] 1 1/2" x 1 1/2" [235727-101] 2" x 2" [235927-101]

Dual MPT/Copper Adapters
3/8" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [243537-101] 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [260237-101] 1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) [243647-101] 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) [260327-101]
3/4" F2080 x 1" MPT or 3/4" C Female (Sweat) [260597-101] 1" F2080 x 1" MPT or 3/4" C Female (Sweat) [260437-101] 1 1/4" F2080 x 1 1/4" MPT or 1" C Female (Sweat) [235557-101] 1 1/2" F2080 x 1 1/2" MPT or 1 1/4" C Female (Sweat) [235757-101]
2" F2080 x 2" MPT or 1 1/2" C Female (Sweat) [235957-101]

Elbow
1/2" x 1/2" (260657-101) 3/4" x 3/4" (260677-101) 1" x 1" (260717-101) 1 1/4" x 1 1/4" (235597-101)
1 1/2" x 1 1/2" (235797-101) 2" x 2" (235997-101)

Elbow-2080 Dual MPT/Copper
1/2" F2080 x 1/2" MPT or 1/2" C Female (Sweat) Drop Ear (260737-101) 3/4" F2080 x 3/4" MPT or 1/2" C Female (Sweat) (260747-101)

Elbow-2080 to Copper
1/2" F2080 x 1/2" C Male (Street) or 3/8" C Female (Sweat) (260537-101) 1/2" F2080 x 3/4" C Female (Sweat) (260557-101) 1/2" F2080 x 3/4" C Male (Street) or 1/2" C Female (Sweat) (260757-101) 3/4" F2080 x 1" C Male (Street) or 3/4" C Female (Sweat) (260767-101)
3/4" F2080 x 3/4" C Male (Street) or 1/2" C Female (Sweat) (260817-101) 5/8" F2080 x 1"C Male (Street) or 3/4" C Female (Sweat) (243687-101) 5/8" F2080 x 3/4" C Male(street) or 1/2"C Female (sweat)

Plugs
1/2" [260087-101] 3/4" [260397-101] 1" [260497-101] 1 1/4" [235267-101]

Reducing Couplings
3/4" x 1/2" [260247-101] 1" x 3/4" [260447-101] 1 1/4" x 1" [235517-101] 1 1/2" x 1" [235737-101]
1 1/2" x 1 1/4" [235717-101] 2" x 1" [235947-101] 2" x 1 1/4" [235937-101] 2" x 1 1/2" [235917-101]

Run Reducing Tee
3/4" x 1/2" x 3/4" (260647-101) 1" x 3/4" x 1" (260687-101) 1 1/4" x 1" x 1 1/4"(235637-101) 1 1/2" x 1" x 1 1/2"(235847-101)
1 1/2" x 1 1/4" x 1 1/2" (235837-101) 2" x 1 1/2" x 2" (236047-101) 2" x 1 1/4" x 2" (236057-101)

Sleeves
3/8" [243507] 1/2" [260077] 5/8" [243607] 3/4" [260877]
1" [260877] 1 1/4" [235507] 1 1/2" [235707] 2" [235907]

Straight Tee
1/2" x 1/2" x 1/2" (260607-101) 3/4" x 3/4" x 3/4" (260617-101) 1" x 1" x 1" (260977-101) 1 1/4" x 1 1/4" x 1 1/4" (235607-101)
1 1/2" x 1 1/2" x 1 1/2" (235807-101) 2" x 2" x 2" (236007-101) 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* + ˘ +++ [G]
Brass (3) Places
Viega
ASTM F877

Adapter (PEX x PB)
3/8" x 3/8" [F18E33V] 1/2" x 1/2" [F18E44V] 3/4" X 3/4" [F18E66V] 1" x 1" [F18E88V]

Adapters (PEX x FPT)
3/4" x 1" [F09E68V]

Adapters (PEX x M Sweat)
1/2" x 3/8" [F02E43V] 1/2" x 1/2" [F02E44V]

Adapters (PEX x MPT)
3/4" x 1/2" [F10E64V]

Elbow (PEX x PEX)
3/4" x 1/2" [F07E64V]

Male Pipe Straight Adapter (PEX x MP)
3/4" x 1" [F10E68V]

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 3/4" [F06E446V] 3/4" x 1/2" x 3/4" [F06E646] 3/4" x 3/4" x 1/2" [F06E664] 1" x 1" x 3/4" [F06E886]

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668] 1" x 1" x 3/4" [F06E884] 

* Accepted by NSF for use in residential and commercial construction,
  including manufactured housing.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § ** +++ [G]
Brass (3) Places
Viega
ASTM F1807

Adapter (PEX x PB)
3/8" x 3/8" [F18E33V] 1/2" x 1/2" [F18E44V] 3/4" X 3/4" [F18E66V] 1" x 1" [F18E88V]

Adapters (PEX x FPT)
3/4" x 1" [F09E68V]

Adapters (PEX x M Sweat)
1/2" x 3/8" [F02E43V] 1/2" x 1/2" [F02E44V]

Adapters (PEX x MPT)
3/4" x 1/2" [F10E64V]

Elbow (PEX x PEX)
3/4" x 1/2" [F07E64V]

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 3/4" [F06E446V] 3/4" x 1/2" x 3/4" [F06E646] 3/4" x 3/4" x 1/2" [F06E664] 1" x 1" x 3/4" [F06E886]

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668] 1" x 1" x 3/4" [F06E884] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
   F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
   from bearing the NSF Mark.  The NSF Mark will appear on the box containing
   the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § ** +++ [G]
Brass (3) Places
Viega
CSA B137.5

Adapter (PEX x PB)
3/8" x 3/8" [F18E33V] 1/2" x 1/2" [F18E44V] 3/4" X 3/4" [F18E66V] 1" x 1" [F18E88V]

Adapters (PEX x FPT)
3/4" x 1" [F09E68V]

Adapters (PEX x M Sweat)
1/2" x 3/8" [F02E43V] 1/2" x 1/2" [F02E44V]

Adapters (PEX x MPT)
3/4" x 1/2" [F10E64V]

Elbow (PEX x PEX)
3/4" x 1/2" [F07E64V]

Male Pipe Straight Adapter (PEX x MP)
3/4" x 1" [F10E68V]

Tee (PEX x PEX x PEX)
1/2" x 1/2" x 3/4" [F06E446V] 3/4" x 1/2" x 3/4" [F06E646] 3/4" x 3/4" x 1/2" [F06E664] 1" x 1" x 3/4" [F06E886]

Tee Adapter (PEX x PEX x PEX)
3/4" x 3/4" x 1" [F06E668] 1" x 1" x 3/4" [F06E884] 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** The F03B44-Termination Nipple (Barb x FPT Swivel) 1/2 x 1/2" Fpt and
   F04B44-Adapters (Barb x FPT Swivel) 1/2 x 1/2" Fpt fittings are exempted
   from bearing the NSF Mark.  The NSF Mark will appear on the box containing
   the fittiings.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


*** These components require additional processing in order to be used in a
    piping system.  The use of these components in NSF Certified fittings
    require written authorization from NSF.

Facility : Monticelli Brusati (BS), Italy

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings˘ § +++ [G]
C69300 Brass

ASTM F877/F2080

Branch Reducing Tees
3/4" x 3/4" x 1/2" (F208E664) 1" x 1" x 1/2" (F208E884) 1" x 1" x 3/4" (F208E886) 1 1/4" x 1 1/4" x 3/4" (F208E10106)
1 1/4" x 1 1/4" x 1" (F208E10108) 1 1/2" x 1 1/2" x 1" (F208E12128) 1 1/2" x 1 1/2" x 1 1/4" (F208E121210) 2" x 2" x 1" (F208E16168)
2" x 2" x 1 1/4" (F208E161610) 2" x 2" x 1 1/2" (F208E161612)

Branch and Run Red Tees
3/4" x 1/2" x 1/2" (F208E644) 1" x 3/4" x 3/4" (F208E866) 1 1/4" x 3/4" x 1" (F208E1068) 1 1/4" x 1" x 1" (F208E1088)
1 1/2" x 3/4" x 1" (F208E1268) 1 1/2" x 1" x 1" (F208E1288) 1 1/2" x 1 1/4" x 1" (F208E12108) 1 1/2" x 1 1/4" x 1 1/4" (F208E121010)
2" x 1 1/2" x 1" (F208E16128) 2" x 1 1/2" x 1 1/4" (F208E161210) 2" x 1 1/4" x 1 1/4" (F208E161010) 2" x 1 1/2" x 1 1/2" (F208E161212)

Bullhead Tees
1/2" x 1/2" x 3/4" (F208E446) 3/4" x 3/4" x 1" (F208E668)

Elbow - ELOC to Copper (Male or Female)
1/2" x 1/2" C Male or 3/8" C Female (F215E44) 1/2" x 3/4" C Female (F215E46) 1/2" x 3/4" C Male or 1/2" C Female (F215E46) 3/4" x 1" C Male or 3/4" C Female (F215E68)
3/4" x 3/4" C Male or 1/2" C Female (F215E66)

Elbows
1/2" x 1/2" (F209E44) 3/4" x 3/4" (F209E66) 1" x 1" (F209E88) 1 1/4" x 1 1/4" (F209E10)
1 1/2" x 1 1/2" (F209E12) 2" x 2" (F209E16)

Run Reducing Tees
3/4" x 1/2" x 3/4" (F208E646) 1" x 3/4" x 1" (F208E868) 1 1/4" x 1" x 1 1/4" (F208E10810) 1 1/2" x 1 1/4" x 1 1/2" (F208E121012)
1 1/2" x 1" x 1 1/2" (F208E12812) 2" x 1/2" x 2" (F208E161216) 2" x 1 1/4" x 2" (F208E161016)

Straight Tees
1/2" x 1/2" x 1/2" (F208E444) 3/4" x 3/4" x 3/4" (F208E666) 1" x 1" x 1" (F208E888) 1 1/4" x 1 1/4" x 1 1/4" (F208E10)
1 1/2" x 1 1/2" x 1 1/2" (F208E12) 2" x 2" x 2" (F208E16) 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
C69300 Brass

CSA B137.5

Branch Reducing Tees
3/4" x 3/4" x 1/2" (F208E664) 1" x 1" x 1/2" (F208E884) 1" x 1" x 3/4" (F208E886) 1 1/4" x 1 1/4" x 3/4" (F208E10106)
1 1/4" x 1 1/4" x 1" (F208E10108) 1 1/2" x 1 1/2" x 1" (F208E12128) 1 1/2" x 1 1/2" x 1 1/4" (F208E121210) 2" x 2" x 1" (F208E16168)
2" x 2" x 1 1/4" (F208E161610) 2" x 2" x 1 1/2" (F208E161612)

Branch and Run Red Tees
3/4" x 1/2" x 1/2" (F208E644) 1" x 3/4" x 3/4" (F208E866) 1 1/4" x 3/4" x 1" (F208E1068) 1 1/4" x 1" x 1" (F208E1088)
1 1/2" x 3/4" x 1" (F208E1268) 1 1/2" x 1" x 1" (F208E1288) 1 1/2" x 1 1/4" x 1" (F208E12108) 1 1/2" x 1 1/4" x 1 1/4" (F208E121010)
2" x 1 1/2" x 1" (F208E16128) 2" x 1 1/2" x 1 1/4" (F208E161210) 2" x 1 1/4" x 1 1/4" (F208E161010) 2" x 1 1/2" x 1 1/2" (F208E161212)

Bullhead Tees
1/2" x 1/2" x 3/4" (F208E446) 3/4" x 3/4" x 1" (F208E668)

Drop Ear Elbow
1/2" x 1/2" FPT (F26E44)

Elbow - ELOC to Copper (Male or Female)
1/2" x 1/2" C Male or 3/8" C Female (F215E44) 1/2" x 3/4" C Female (F215E46) 1/2" x 3/4" C Male or 1/2" C Female (F215E46) 3/4" x 1" C Male or 3/4" C Female (F215E68)
3/4" x 3/4" C Male or 1/2" C Female (F215E66)

Elbows
1/2" x 1/2" (F209E44) 3/4" x 3/4" (F209E66) 1" x 1" (F209E88) 1 1/4" x 1 1/4" (F209E10)
1 1/2" x 1 1/2" (F209E12) 2" x 2" (F209E16)

Run Reducing Tees
3/4" x 1/2" x 3/4" (F208E646) 1" x 3/4" x 1" (F208E868) 1 1/4" x 1" x 1 1/4" (F208E10810) 1 1/2" x 1" x 1 1/2" (F208E12812)
1 1/2" x 1 1/4" x 1 1/2" (F208E121012) 2" x 1/2" x 2" (F208E161216) 2" x 1 1/4" x 2" (F208E161016)

Straight Tees
1/2" x 1/2" x 1/2" (F208E444) 3/4" x 3/4" x 3/4" (F208E666) 1" x 1" x 1" (F208E888) 1 1/4" x 1 1/4" x 1 1/4" (F208E10)
1 1/2" x 1 1/2" x 1 1/2" (F208E12) 2" x 2" x 2" (F208E16) 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
C69300

ASTM F1807

Drop Ear Elbow
1/2" x 1/2" FPT (F26E44) 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Manifold˘ § +++ [G]
C69300 Brass

ASTM F1807
One 3/4" Inlet x Three 1/2" Outlets (F180E604-3) One 3/4" Inlet x Four 1/2" Outlets (F180E604-4) Two 3/4" Inlet x Three 1/2" Outlets (F180E664-3) Two 3/4" Inlet x Four 1/2" Outlets (F180E664-4) 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Manifold˘ § +++ [G]
C69300 Brass

CSA B137.5
One 3/4" Inlet x Three 1/2" Outlets (F180E604-3) One 3/4" Inlet x Four 1/2" Outlets (F180E604-4) Two 3/4" Inlet x Three 1/2" Outlets (F180E664-3) Two 3/4" Inlet x Four 1/2" Outlets (F180E664-4) 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 1038
Processing time was 1 seconds