These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=C0037489&Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
IPEX USA LLC 
3 Place Du Commerce, Suite 101
Verdun, QC H3E 1H7 
Canada 
514-769-3445
Visit this company's website

Facility : Pineville, NC

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ § [G]
PVC 1120
IPEX USA LLC$
ASTM D1785
1/2" - 24" Sch 40
1/2" - 24" Sch 120
1/4" - 24" Sch 80 

$ This pipe product is also represented by the trade name XIRTEC140.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PVC 1120
IPEX USA LLC$
ASTM D2241
1 1/4" - 24" SDR 32.5
1" - 24" SDR 26
1/2" SDR 13.5
3/4" - 24" SDR 21 

$ This pipe product is also represented by the trade name XIRTEC140.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+++ [G]
CPVC 4120
IPEX
ASTM F442
1/2" - 6" SDR 11
4" SDR 32.5
4" SDR 26 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+++ [G]
CPVC 4120
IPEX
ASTM F441
1/2" - 16" Sch 40
1/2" - 16" Sch 80¢ 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe¢ +++ [G]
CPVC 4120
IPEX
CSA B137.6
1 1/4" - 2 1/2" Sch 80
1/2" - 6" SDR 11 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PVC I-G1
IPEX
ASTM D2466

45° Ell, S x S
1/2" - 8"

45° Wye Sch 40
3" 4" 6" 6" x 6" x 4"

90° Ell, S x FPT
1/2" - 2"

90° Ell, S x S
035519 1/2" W 035109 1/2"G 035520 3/4" 035110 3/4"
035521 1"W 035111 1"G 035522 1 1/4" 035112 1 1/4"
035523 1 1/2"W 035113 1 1/2"G 035524 2"W 035114 2"G
035525 2 1/2"W 035115 2 1/2"G 035526 3"W 035116 3"G
035527 4"W 037117 4"G 035528 5"W 037118 5"G
035529 6"W 035119 6"G 035530 8"W 035120 8"G

90° Reducing Ell, S x FPT
3/4" x 1/2" 035516 1" x 3/4" 035517 1" x 1/2" 035515 1 1/4" x 1"

90° Reducing Ell, S x S
3/4" x 1/2" 035536 1" x 1/2" 035978 1" x 3/4" 1 1/4" x 1"

90° Street Ell, S x MPT
1 1/4" 1 1/2" and 2"

90° Street Ell, S x SPG
1 1/4" 1 1/2" and 2"

Cap FPT
1/2" 3/4" 1" 1 1/4"
1 1/2" 2" 3" 4"

Cap, S
1/2" - 8"

Coupling, FPT x FPT
1/2" 3/4" 1" 1 1/4"
1 1/2" 2"

Coupling, S x S
1/2" - 8"

FM Adapter
1/2" x 3/4"

Female Adapter, S x FPT
1/2" - 6"

Male Adapter, S x MPT
1/2" - 6"

Plug, MPT
1" 2"

Reducing Bushing, MPT x FPT
3/4" x 1/2" 1" x 1/2" 1" x 3/4"

Reducing Bushing, Slip x FPT
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4"
2" x 1" 2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 2"
3" x 2" 3" x 2 1/2" 4" x 2" 4" x 3"

Reducing Bushing, Slip x S
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4"
2" x 1" 2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 2"
3" x 1" 3" x 1 1/2" 3" x 2" 3" x 2 1/2"
4" x 2" 4" x 2 1/2" 4" x 3" 6" x 3"
6" x 4" 8" x 6"

Reducing Male Adapter, MPT x S
1/2" x 3/4" 1" x 3/4" 2" x 1 1/2"

Reducing Tee, S x S x FPT
035863 3/4" x 3/4" x 1/2" 035865 1" x 1" x 1/2" 035866 1" x 1" x 3/4" 035871 1 1/4" x 1 1/4" x 1"
03576 1 1/2" x 1 1/2" x 1 1/4" 035881 2" x 2" x 1 1/2" 035869 1 1/4" x 1 1/4" x 1/2" 035875 1 1/2" x 1 1/2" x 1"
035880 2" x 2" x 1 1/4" 035870 1 1/4" x 1 1/4" x 3/4" 035877 2" x 2" x 1/2" 035873 1 1/2" x 1 1/2" x 1/2"
035878 2" x 2" x 3/4" 035874 1 1/2" x 1 1/2" x 3/4" 035879 2" x 2" x 1" 035860 1/2" x 1/2" x 3/4"
035867 1" x 3/4" x 1/2" 1 1/4" x 1" x 3/4" 035884 2 1/2" x 2 1/2" x 1 1/2" 035862 3/4" x 1/2" x 1/2"
1" x 3/4" x 3/4" 1 1/4" x 1" x 1" 035890 3" x 3" x 2" 3/4" x 1/2" x 3/4"
035868 1 1/4" x 1" x 1/2" 1 1/2" x 1 1/4" x 1/2" 2" x 1 1/2" x 1" 035895 4" x 4" x 3"

Reducing Tee, S x S x S
035792 3/4" x 3/4" x 1/2" 035794 1" x 1" x 1/2" 035795 1" x 1" x 3/4" 035999 1 1/4" x 1 1/4" x 1"
035803 1 1/2" x 1 1/2" 1 1/4" 035808 2" x 2" x 1" 035810 2" x 2" x 1 1/2" 035837 8" x 8" x 6"
035822 3" x 3" x 2" 035829 4" x 4" x 3" 035834 6" x 6" x 4" 035797 1 1/4" x 1 1/4" x 1/2"
035798 1 1/4" x 1 1/4" x 3/4" 035800 1 1/2 x 1 1/2" x 1/2" 035801 1 1/2" x 1 1/2" x 3/4" 035802 1 1/2" x 1 1/2" x 1"
035806 2" x 2" x 1/2" 035807 2" x 2" x 3/4" 1/2" x 1/2" x 3/4" 035791 3/4" x 3/4" x 1"
1" x 3/4" x 3/4" 1 1/4" x 1" x 1/2" 2" x 2 1/2" x 3/4" 035815 2 1/2" x 2 1/2" x 1 1/2"
035790 3/4" x 1/2" x 1/2" 1" x 1/2" x 1" 1" x 3/4" x 1" 035796 1 1/4" x 1" x 3/4"
2" x 1 1/2" x 1 1/4" 035821 3" x 3" x 1 1/2" 3/4" x 1/2" x 3/4" 1" x 3/4" x 1/2"
1" x 1" x 1 1/4" 1 1/4" x 1" x 1" 2" x 1 1/2" x 1 1/4" 035833 6" x 6" x 3"
035828 4" x 4" x 2"

Spigot Plug
2"

Tee, S x S x FPT
035851 1/2" 035852 3/4" 035853 1" 035854 1 1/4"
035855 1 1/2" 035856 2"

Tee, S x S x S
035775 1/2"W 035290 1/2"G 035776 3/4"W 035291 3/4"G
035777 1"W 035292 1"G 035778 1 1/4"W 035293 1 1/4"G
035779 1 1/2"W 035294 1 1/2"G 035780 2"W 035295 2"G
035781 2 1/2"W 035296 2 1/2"G 035782 3"W 035297 3"G
035783 4"W 035298 4"G 035784 5"W 035299 5"G
035785 6"W 035300 6"G 035786 8"W 035301 8"G 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PVC I-G1
IPEX
ASTM D2467

45° Ell, S x S
036144 1/2" 036145 3/4" 036146 1" 036147 1 1/4"
036148 1 1/2" 036149 2" 036150 2 1/2" 036151 3"
036152 4"

45º Wye
3" 4" 6" 6" x 6" x 4"

90° Ell, S x FPT
1/2" - 1" 1 1/4" 1 1/2"

90° Ell, S x S
036181 1/2" 036182 3/4" 036183 1" 036184 1 1/4"
036185 1 1/2" 036186 2" 036187 2 1/2" 036188 3"
036189 4"

Cap, S
1/2" - 8"

Coupling, S x S
1/2" - 8"

Female Adapter, S x FPT
1/2" - 4"

Male Adapter, S x MPT
1/2" - 4"

Reducing Bushing, Slip x FPT
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4"
2" x 1" 2" x 1 1/4" 2" x 1 1/2" 2 1/2" x 2"
3" x 2" 3" x 2 1/2" 2 1/2" x 1/2" 2 1/2" x 1 1/4"
4" x 3" 2 1/2" x 1" 2 1/2" x 3/4" 2 1/2" x 1 1/2"
3" x 1 1/2" 3" x 1" 4" x 2"

Reducing Bushing, Slip x S
036601 1/2" x 3/8" 036604 3/4" x 1/2" 036605 1" x 1/2" 036606 1" x 3/4"
036607 1 1/4" x 1/2" 036608 1 1/4" x 3/4" 036609 1 1/4" x 1" 036610 1 1/2" x 1/2"
036611 1 1/2" x 3/4" 036612 1 1/2" x 1" 036613 1 1/2" x 1 1/4 036614 2" x 1/2"
036615 2" x 3/4" 036616 2" x 1" 036617 2" x 1 1/4" 036618 2" x 1 1/2"
2 1/2" x 1/2" 036620 2 1/2" x 1 1/4" 2 1/2" x 3/4" 036621 2 1/2" x 1 1/2"
036622 2 1/2" x 2" 036623 3" x 1" 036624 3" x 1 1/2" 036625 3" x 2"
036626 3" x 2 1/2" 3 1/2" x 1" 3" x 1 1/4" 036627 4" x 2"
036629 4" x 2 1/2" 036630 4" x 3" 036633 6" x 3" 036634 6" x 4"
036638 8" x 6"

Reducing Coupling, S x S
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1" 2" x 1 1/2"
3" x 2" 4" x 2" 4" x 3" 6" x 4"

Reducing Tee, S x S x S
3/4" x 3/4" x 1/2" 1" x 1" x 3/4" 1 1/2" x 1 1/2" x 1" 2" x 2" x 1"
2" x 2" x 1 1/2" 3" x 3" x 2" 4" x 4" x 3" 6" x 6" x 4"
8" x 8" x 6" 6" x 6" x 3" 4" x 4" x 2"

Tee, S x S x FPT
036828 1/2" 036829 3/4" 036830 1"

Tee, S x S x S
036770 1/2" 036771 3/4" 036772 1" 036773 1 1/4"
036774 1 1/2" 036775 2" 036776 2 1/2" 036777 3"
036778 4" 036780 6" 036781 8" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PVC I-G1
IPEX
ASTM D2464

45° Ell, FPT x FPT
036162 1/2" 036163 3/4" 036164 1" 036165 1 1/4"
036166 1 1/2" 036167 2" 036168 2 1/2" 036169 3"
036170 4"

90° Ell, FPT x FPT
036199 1/2" 036200 3/4" 036201 1" 036202 1 1/4"
036203 1 1/2" 036204 2" 036205 2 1/2" 036206 3"
036207 4"

Cap, FPT
1/2" - 4"

Coupling, FPT x FPT
1/2" - 4"

Plug, MPT
1/2" - 2"

Reducing Bushing, MPT x FPT
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 3/4" 1 1/2" x 1"
1 1/2" x 1 1/4" 2" x 1" 2" x 1 1/4" 2" x 1 1/2"
2" x 3/4" 4" x 2" 2" x 1/2" 3" x 2"
2 1/2" x 2" 4" x 3"

Tee, FPT x FPT, FPT
036819 1/2" 036820 3/4" 036821 1" 036822 1 1/4"
036823 1 1/2" 036824 2" 036825 2 1/2" 036826 3"
036827 4" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
CPVC
IPEX (AquaRise)
ASTM F438

45° Elbow (S x S)
359164 1/2" 359165 3/4" 359166 1"

90° Elbow (S x S)
359194 1/2" 359195 3/4" 359196 1"

90° Street Elbow (S x S)
359175 1/2" 359176 3/4" 359177 1"

Caps (S)
359109 1/2" 359110 3/4" 359111 1"

Coupling (S x S)
359132 1/2" 359133 3/4" 359134 1"

Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"

Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"

Reducer Bushing (S x Sp)
359375 3/4" x 1/2" 359376 1" x 1/2" 359377 1" x 3/4"

Reducer Coupling (S x S)
359460 3/4" x 1/2" 359461 1" x 1/2" 359462 1" x 3/4"

Reducing Tee (S x S x S)
359514 3/4" x 1/2" x 1/2" 359513 3/4" x 1/2" x 3/4" 359492 3/4" x 3/4" x 1/2" 359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4"

Tee (S x S x S)
359481 1/2" 359482 3/4" 359483 1" 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
CPVC
IPEX (AquaRise)
ASTM F439

45° Elbow (S x S)
359167 1 1/4" 359168 1 1/2" 359169 2" 359170 2 1/2"
359171 3" 359172 4" 359173 6"

90° Elbow (S x S)
359197 1 1/4" 3591981 1/2" 359199 2" 359200 2 1/2"
359201 3" 359202 4" 359203 6"

Caps (S)
359112 1 1/4" 359113 1 1/2" 359114 2" 359115 2 1/2"
359116 3" 359107 4" 359108 6"

Coupling (S x S)
359135 1 1/4" 359136 1 1/2" 359137 2" 359138 2 1/2"
359139 3" 359140 4" 359141 6"

Reducer Bushing (S x Sp)
359378 1 1/4" x 1/2" 359379 1 1/4" x 3/4" 359380 1 1/4" x 1" 359381 1 1/2" x 1/2"
359382 1 1/2" x 3/4" 359383 1 1/2" x 1" 359384 1 1/2" x 1 1/4" 359385 2" x 1/2"
359386 2" x 3/4" 359387 2" x 1" 359388 2" x 1 1/4" 359389 2" x 1 1/2"
359390 2 1/2" x 3/4" 359391 2 1/2" x 1" 359392 2 1/2" x 2" 359393 3" x 1 1/2"
359394 3" x 2" 359395 3" x 2 1/2" 359428 4" x 1 1/4" 359429 4" x 1 1/2"
359396 4" x 2" 359430 4" x 2 1/2" 359397 4" x 3" 359398 6" x 2"
359399 6" x 3" 359400 6" x 4"

Reducer Coupling (S x S)
359463 1 1/4" x 1" 359465 1 1/2" x 1" 359466 1 1/2" x 1 1/4" 359467 2" x 1"
359458 2" x 1 1/2" 359470 3" x 2" 359459 4" x 2" 359472 4" x 3"

Reducing Tee (S x S x S)
359495 1 1/4" x 1 1/4" x 1" 359515 1 1/2" x 1 1/2" x 1/2" 359496 1 1/2" x 1 1/2" x 3/4" 359497 1 1/2" x 1 1/2" x 1"
359498 2" x 2" x 1/2" 359499 2" x 2" x 3/4" 359500 2" x 2" x 1" 359501 2" x 2" x 1 1/2"
359503 2 1/2" x 2 1/2" x 1/2" 359504 2 1/2" x 2 1/2" x 3/4" 359505 2 1/2" x 2 1/2" x 1" 359506 2 1/2" x 2 1/2" x 1 1/4"
359507 2 1/2" x 2 1/2" x 2" 359502 3" x 3" x 2" 359508 4" x 4" x 2" 359509 4" x 4" x 3"
359510 6" x 6" x 2" 359511 6" x 6" x 3" 359512 6" x 6" x 4"

Tee (S x S x S)
359484 1 1/4" 359485 1 1/2" 359486 2" 359487 2 1/2"
359488 3" 359489 4" 359490 6" 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+++ [G]
CPVC 4120
IPEX (AquaRise)
ASTM 442
1/2" - 6" SDR 11 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]
CPVC 41
IPEX (AquaRise)
ASTM F1970

Union (S x S)
359520 1/2" 359521 3/4" 359522 1" 359523 1 1/4"
359524 1 1/2" 359525 2" 359526 3" 359550 4"

Van Stone Style Flange 150 lbs.
359266 1 1/2" 359267 2" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings## +++ [G]
CPVC 41
IPEX (Aquarise)
ASTM F1970

Flange x Socket
359040 2 1/2" 359041 3" 359043 4" 359042 6" 

## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]
CPVC 41
IPEX (AquaRise)
ASTM F1970

Flange x Socket
359228 1/2" 359229 3/4" 359230 1" 359231 1 1/4"
359232 1 1/2" 359233 2" 359234 2 1/2" 359235 3"
359236 4" 359238 6" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe¢ +++ [G]
CPVC 4120
IPEX (AquaRise)
CSA B137.6
1/2" - 6" SDR 11 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
CPVC 41
IPEX
ASTM F439

45° Ell, S x S
059164 1/2" 059165 3/4" 059166 1" 059167 1 1/4"
059168 1 1/2" 059169 2" 059170 2 1/2" 059171 3"
059172 4" 059173 6" 059174 8"

45º Wye
3" 6" x 6" x 4" 6" 4"

90° Ell, S x FPT
1/2" - 2 1/2"

90° Ell, S x S
059194 1/2" 059195 3/4" 059196 1" 059197 1 1/4"
059198 1 1/2" 059199 2" 059200 2 1/2" 059201 3"
059202 4' 059203 6" 059204 8"

Cap, S
1/2" - 6"

Coupling, S x S
1/2" - 8"

Female Adapter, S x FPT
1/2" - 4"

Male Adapter, S x MPT
1/2" - 4"

Reducing Bushing, MPT x FPT
2" x 1/2" 2" x 3/4"

Reducing Bushing, Slip x FPT
3/4" x 1/2" 1" x 1/2" 1" x 3/4" 1 1/4" x 1/2"
1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/2" x 1" 1 1/2" x 1 1/4" 2" x 1/2" 2" x 3/4"
2" x 1" 2" x 1 1/4" 2" x 1 1/2" 3" x 2"

Reducing Bushing, Slip x S
059375 3/4" x 1/2" 059376 1" x 1/2" 059377 1" x 3/4" 059378 1 1/4" x 1/2"
059379 1 1/4" x 3/4" 059380 1 1/4" x 1" 059381 1 1/2" x 1/2" 059382 1 1/2" x 3/4"
059383 1 1/2" x 1" 059384 1 1/2" x 1 1/4" 059385 2" x 1/2" 059386 2" x 3/4"
059387 2" x 1" 059388 2" x 1 1/4" 059389 2" x 1 1/2" 059392 2 1/2" x 2"
3" x 1" 059395 3" x 1 1/2" 059393 3" x 2 1/2" 059394 3" x 2"
059396 4" x 2" 059397 4" x 3" 4" x 2 1/2" 059400 6" x 4"
059399 6" x 3" 059401 8" x 6"

Reducing Coupling, S x S
3/4" x 1/2" 1" x 1/2" 1 1/4" x 1" 1 1/2" x 1"
1 1/2" x 1 1/4" 2" x 1" 2" x 1 1/2" 3" x 2"
4" x 2" 4" x 3" 6" x 4" 1" x 3/4"

Reducing Tee, S x S x S
3/4" x 3/4" x 1/2" 1" x 1" x 3/4" 1 1/2" x 1 1/2" x 1" 2" x 2" x 1 1/2"
3" x 3" x 2" 4" x 4" x 3" 6" x 6" x 4" 1" x 1" x 1/2"
2" x 2" x 1" 4" x 4" x 2"

Tee, S x S x FPT
059518 1/2"

Tee, S x S x S
1/2" - 8" 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# + [G]
PVC I-G1
IPEX
ASTM F1970

Flange x Blind
1/2" - 8"

Flange x FPT
1/2" - 4"

Flange x Socket
1/2" - 12"

Flange x Spigot
3" - 8" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]
CPVC 41
IPEX
ASTM F1970

Flange x Blind
1/2" - 8"

Flange x FPT
1/2" - 4"

Flange x Spigot
3" - 8" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# + [G]
PVC I-G1
IPEX
ASTM F1970

Union (FPT x FPT) Sch 80
1/2" - 3"

Union (FPT x FPT) Sch 40
1/2" - 3"

Union (S x S) Sch 40
1/2" - 3"

Union (S x S) Sch 80
1/2" - 3" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]
CPVC 41
IPEX
ASTM F1970

Union (FPT x FPT) Sch 80
1/2" - 3"

Union (S x S) Sch 80
1/2" - 3" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
CPVC 41
IPEX
ASTM F1970

Flange x Socket
059469 2 1/2"* 059477 3"* 059358 4"** 059359 6"** 

* Product tested with metal ring kit for uses in 73°F with a rated pressure of 420 psi.
** Product tested with metal ring kit for uses in 73°F with a rated pressure of 320 psi.

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# +++ [G]
CPVC 41
IPEX
ASTM F1970

Flange x Socket
1/2" - 2" 059234 2 1/2" 059235 3" 059236 4"
059238 6" 7" - 12" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ +++ [G]
CPVC
IPEX (AquaRise)
CSA B137.6

45° Elbow (S x S)
359164 1/2" 359165 3/4" 359166 1" 359167 1 1/4"
359168 1 1/2" 359169 2" 359170 2 1/2" 359171 3"
359172 4" 359173 6"

90° Elbow (S x S)
359194 1/2" 359195 3/4" 359196 1" 359197 1 1/4"
359198 1 1/2" 359199 2" 359200 2 1/2" 359201 3"
359202 4" 359203 6"

90° Street Elbow (S x S)
359175 1/2" 359176 3/4" 359177 1"

Caps (S)
359109 1/2" 359110 3/4" 359111 1" 359112 1 1/4"
359113 1 1/2" 359114 2" 359115 2 1/2" 359116 3"
359107 4" 359108 6"

Coupling (S x S)
359132 1/2" 359133 3/4" 359134 1" 359135 1 1/4"
359136 1 1/2" 359137 2" 359138 2 1/2" 359139 3"
359140 4" 359141 6"

Manifold Tee (¾" SPGx¾" SOC w/One ½" SOC Branches)
359061 3/4" x 1/2"

Manifold Tee (¾" SPGx¾" SOC w/Two ½" SOC Branches)
359060 3/4" x 1/2"

Reducer Bushing (S x Sp)
359375 3/4" x 1/2" 359376 1" x 1/2" 359377 1" x 3/4" 359378 1 1/4" x 1/2"
359379 1 1/4" x 3/4" 359380 1 1/4" x 1" 359381 1 1/2" x 1/2" 359382 1 1/2" x 3/4"
359383 1 1/2" x 1" 359384 1 1/2" x 1 1/4" 359385 2" x 1/2" 359386 2" x 3/4"
359387 2" x 1" 359388 2" x 1 1/4" 359389 2" x 1 1/2" 359390 2 1/2" x 3/4"
359391 2 1/2" x 1" 359392 2 1/2" x 2" 359393 3" x 1 1/2" 359394 3" x 2"
359395 3" x 2 1/2" 359428 4" x 1 1/4" 359429 4" x 1 1/2" 359396 4" x 2"
359430 4" x 2 1/2" 359397 4" x 3" 359398 6" x 2" 359399 6" x 3"
359400 6" x 4"

Reducer Coupling (S x S)
359460 3/4" x 1/2" 359461 1" x 1/2" 359462 1" x 3/4" 359463 1 1/4" x 1"
359465 1 1/2" x 1" 359466 1 1/2" x 1 1/4" 359467 2" x 1" 359458 2" x 1 1/2"
359470 3" x 2" 359459 4" X 2" 359472 4" X 3"

Reducing Tee (S x S x S)
359513 3/4" x 1/2" x 3/4" 359514 3/4" x 1/2" x 1/2" 359492 3/4" x 3/4" x 1/2" 359493 1" x 1" x 1/2"
359494 1" x 1" x 3/4" 359495 1 1/4" x 1 1/4" x 1" 359515 1 1/2" x 1 1/2" x 1/2" 359496 1 1/2" x 1 1/2" x 3/4"
359497 1 1/2" x 1 1/2" x 1" 359498 2" x 2" x 1/2" 359499 2" x 2" x 3/4" 359500 2" x 2" x 1"
359501 2" x 2" x 1 1/2" 359503 2 1/2" x 2 1/2" x 1/2" 359504 2 1/2" x 2 1/2" x 3/4" 359505 2 1/2" x 2 1/2" x 1"
359506 2 1/2" x 2 1/2" x 1 1/4" 359507 2 1/2" x 2 1/2" x 2" 359502 3" x 3" x 2" 359508 4" x 4" x 2"
359509 4" x 4" x 3" 359510 6" x 6" x 2" 359511 6" x 6" x 3" 359512 6" x 6" x 4"

Tee (S x S x S)
359481 1/2" 359482 3/4" 359483 1" 359484 1 1/4"
359485 1 1/2" 359486 2" 359487 2 1/2" 359488 3"
359489 4" 359490 6"

Union (S x S)
359520 1/2" 359521 3/4" 359522 1" 359523 1 1/4"
359524 1 1/2" 359525 2" 359526 3" 359550 4"

Van Stone Style Flange 150 lbs.
359266 1 1/2" 359267 2" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings¢ ## +++ [G]
CPVC 41
IPEX (Aquarise)
CSA B137.6

Flange x Socket
359040 2 1/2" 359041 3" 359043 4" 359042 6" 

¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
## Product tested with metal ring kit for uses in 73°F with a rated pressure of 400 psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings# ¢ +++ [G]
CPVC 41
IPEX (AquaRise)
CSA B137.6

Flange x Socket
359228 1/2" 359229 3/4" 359230 1" 359231 1 1/4"
359232 1 1/2" 359233 2" 359234 2 1/2" 359235 3"
359236 4" 359238 6" 

# Product tested for use in cold water (73°F) applications with a rated pressure of 150
  psi.
¢ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
CPVC 41
IPEX
SE 8459

45° Ell, FPT x FPT
059178 1/2" 059179 3/4" 059180 1" 059181 1 1/4"
059182 1 1/2" 059183 2" 059186 4"

45° Ell, S x S
1/2" - 8"

45º Wye
3" 4" 6" 6" x 6" x 4"

90° Ell, FPT x FPT
059208 1/2" 059209 3/4" 059210 1" 059211 1 1/4"
059212 1 1/2" 059213 2" 059214 2 1/2" 059215 3"
059216 4"

90° Ell, S x FPT
1/2" - 2 1/2"

90° Ell, S x S
1/2" - 8"

Cap, FPT
1/2" - 4"

Cap, S
1/2" - 6"

Coupling, FPT x FPT
1/2" - 4"

Coupling, S x S
1/2" - 8"

Female Adapter, S x FPT
1/2" - 4"

Male Adapter, S x MPT
1/2" - 4"

Plug, MPT
1/2" - 4"

Reducing Bushing, MPT x FPT
1 1/2" x 1 1/4" 1 1/2" x 3/4" 2" x 1 1/2" 2" x 1/2"
1 1/2" x 1" 1 1/4" x 1" 1" x 1/2" 1 1/4" x 3/4"
3/4" x 1/2" 2" x 1" 2" x 1 1/4" 1" x 3/4"
1 1/4" x 1/2" 1 1/2" x 1/2" 2" x 3/4"

Reducing Bushing, Slip x FPT
1 1/2" x 1 1/4" 1 1/2" x 1" 1 1/2" x 1/2" 1 1/2" x 3/4"
1 1/4" x 1" 1 1/4" x 1/2" 1 1/4" x 3/4" 1" x 1/2"
1" x 3/4" 2" x 1 1/2" 2" x 1 1/4" 2" x 1"
2" x 1/2" 2" x 3/4" 3" x 2" 3/4" x 1/2"

Reducing Bushing, Slip x S
1 1/4" x 1/2" 1 1/4" x 3/4" 1 1/4" x 1" 1 1/2" x 1/2"
1 1/2" x 3/4" 1 1/2" x 1" 1 1/2" x 1 1/4" 1" x 1/2"
1" x 3/4" 2 1/2" x 2" 2" x 1 1/2" 2" x 1 1/4"
2" x 1" 2" x 1/2" 2" x 3/4" 3" x 1 1/2"
3" x 1" 3" x 2 1/2" 3" x 2" 3/4" x 1/2"
4" x 2 1/2" 4" x 2" 4" x 3" 6" x 3"
6" x 4" 8" x 6"

Reducing Coupling, S x S
1 1/2" x 1 1/4" 1 1/2" x 1" 1 1/4" x 1" 1" x 1/2"
1" x 3/4" 2" x 1 1/2" 2" x 1" 3" x 2"
3/4" x 1/2" 4" x 2" 4" x 3" 6" x 4"

Reducing Tee, S x S x S
1 1/2" x 1 1/2" x 1" 1" x 1" x 1/2" 1" x 1" x 3/4" 2" x 2" x 1 1/2"
2" x 2" x 1" 3" x 3" x 2" 3/4" x 3/4" x 1/2" 4" x 4" x 2"
4" x 4" x 3" 6" x 6" x 4"

Tee, FPT x FPT x FPT
059508 3/8" 059507 1/4" 059509 1/2" 059510 3/4"
059511 1" 059512 1 1/4" 059513 1 1/2" 059514 2"
059515 2 1/2" 059516 3" 059517 4"

Tee, S x S x FPT
1/2" - 1"

Tee, S x S x S
1/2" - 8" 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+++ [G]
CPVC 4120
IPEX
SE 8459
1/2" - 16" Sch 40
1/2" - 16" Sch 80 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


@ Maximum number of transition fittings per residence not to exceed 30.

Well Casings

Product Type Material Type Trade Name Product Standard

Well Casing[G]
PVC 1120 IC-0
IPEX USA LLC$
ASTM F480
2" - 6" SDR 13.5
2" - 8" Sch 40
2" - 8" SDR 21
3" - 8" Sch 80
4" - 8" SDR 26 

$ This pipe product is also represented by the trade name XIRTEC140.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 942
Processing time was 0 seconds