These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=C0052841&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Smith-Cooper International Inc. | |
| 2867 Vail Avenue | |
| Commerce, CA 90040 | |
| United States | |
| 323-890-4455 |
Facility : # 1 China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings (PW)% + [G] |
CPVC |
Smith-Cooper International Inc. |
ASTM F1970 |
|
Compression Couplings |
|||
| 1/2" - 1" | |||
|
CPVC Unions |
|||
| 1/2" - 1" | |||
% Product tested for use in commercial hot water (180°F) applications with a rated pressure of 100psi. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings (PW)# + [G] |
PVC |
Smith-Cooper International Inc. |
ASTM F1970 |
|
PVC Unions |
|||
| 1/2" - 4" | |||
|
Expandable Repair Couplings |
|||
| 1/2" - 4" | |||
|
Compression Tees (Threaded) |
|||
| 1/2" - 2" | |||
|
Compression Tees (Solvent) |
|||
| 1/2" - 2" | |||
|
Compression Male Adapters |
|||
| 1/2" - 2" | |||
|
Compression Couplings |
|||
| 1/2" - 4" | |||
# Product tested for use in commercial cold water (73°F) applications with a rated pressure of 150psi. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Valves (PW)# +++ [G] |
PVC |
Smith-Cooper International Inc. |
ASTM F1970 |
|
Compact Ball Valves |
|||
| 1/2" - 2" | |||
# Product tested for use in commercial cold water (73°F) applications with a rated
pressure of 150psi.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
|||
Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds