These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Company=C0091800&Standard=014&LowLead=Y&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Watts Water Technologies | |
| 815 Chestnut Street | |
| North Andover, MA 01845-6098 | |
| United States | |
| 978-688-1811 |
Facility : Fujian, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Fittings% § ++ [G] |
MLTPL |
24 Series Fitting |
ASTM F877 |
|
Reducing Stem 1/2" CTS x 1/4" O.D. |
|||
| P-607 | |||
% Fittings Certified for use with solid wall or 5 layer PEX only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings# % ˘ ++ [G] |
MLTPL |
24 Series Fitting |
CSA B137.5 |
|
Reducing Stem 1/2" CTS x 1/4" O.D. |
|||
| P-607 | |||
# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard and intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. % Fittings Certified for use with solid wall or 5 layer PEX only. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings# % § ++ [G] |
MLTPL |
35 Series Fitting |
ASTM F877 |
|
Drop Ear Elbow 1/2" CTS x 1/2" NPT |
|||
| P-638 | |||
|
Dual Stem Body 1" CTS |
|||
| P-1079 | |||
|
Dual Union Body 1" CTS |
|||
| P-1077 | |||
|
End Stop 1" CTS |
|||
| P-1070 | |||
|
End Stop 1/2" CTS |
|||
| P-670 | |||
|
End Stop 3/4" CTS |
|||
| P-870 | |||
|
End Stop 3/8" CTS |
|||
| P-470 | |||
|
Female Connector 1" CTS x 1" NPS |
|||
| P-1015 | |||
|
Female Connector 3/4" CTS x 3/4" NPS |
|||
| P-815 | |||
|
Female Stem 1/2" CTS x 1/2" NPS |
|||
| P-605 | |||
|
Female Swivel Connector 1/2" CTS x 1/2" NPS |
|||
| P-615 | |||
|
Female Swivel Connector 1/2" CTS x 3/4" CLOSET |
|||
| P-616 | |||
|
Female Swivel Connector 1/2" CTS x 3/4" FGHT |
|||
| P-618 | |||
|
Female Swivel Connector 1/2" CTS x 3/4" NPS |
|||
| P-617 | |||
|
Female Swivel Elbow 1/2" CTS x 1/2" NPS |
|||
| P-635 | |||
|
Female Swivel Elbow 1/2" CTS x 3/4" CLOSET |
|||
| P-639 | |||
|
Female Swivel Elbow 1/2" CTS x 3/4" FGHT |
|||
| P-632 | |||
|
Female Swivel Elbow 1/2" CTS x 3/4" NPS |
|||
| P-637 | |||
|
Female Swivel Elbow 3/8" CTS x 1/2" NPS |
|||
| P-436 | |||
|
Female Swivel Elbow 3/8" CTS x 3/4" CLOSET |
|||
| P-472 | |||
|
Hose Barb Fitting 1/2" CTS x 1/2" HOSE |
|||
| P-608 | |||
|
In-Line Valve 1/2" CTS |
|||
| P-650 | |||
|
In-Line Valve 3/4" CTS |
|||
| P-866 | |||
|
In-Line Valve 3/8" CTS |
|||
| P-450 | |||
|
Male Connector 1" CTS x 1" NPT |
|||
| P-1010 | |||
|
Male Connector 1/2" CTS x 1/2" NPT |
|||
| P-610 | |||
|
Male Connector 1/2" CTS x 3/4" MGHT |
|||
| P-614 | |||
|
Male Connector 1/2" CTS x 3/4" NPT |
|||
| P-613 | |||
|
Male Connector 1/2" CTS x 3/8" NPT |
|||
| P-609 | |||
|
Male Connector 3/4" CTS x 3/4" NPT |
|||
| P-810 | |||
|
Male Connector 3/4" CTS x 3/8" NPT |
|||
| P-410 | |||
|
Male Connector 3/8" CTS x 1/2" NPT |
|||
| P-412 | |||
|
Male Elbow 1/2" CTS x 1/2" NPT |
|||
| P-630 | |||
|
Male Elbow 1/2" CTS x 3/8" NPT |
|||
| P-631 | |||
|
Male Stem 1/2" CTS x 1/2" NPT |
|||
| P-604 | |||
|
Male Thread Tee 1/2" CTS x 1/2" NPT |
|||
| P-642 | |||
|
Reducing Branch Tee 1/2" CTS x 1/4" O.D. |
|||
| P-641 | |||
|
Reducing Branch Tee 3/4" CTS x 1/2" CTS |
|||
| P-841 | |||
|
Reducing Stackable Valve 1/2" CTS x 1/4" O.D. |
|||
| P-668 | |||
|
Reducing Stem 1" CTS x 1/2" CTS |
|||
| P-1018 | |||
|
Reducing Stem 1" CTS x 3/4" CTS |
|||
| P-1019 | |||
|
Reducing Stem 1/2" CTS x 3/8" CTS |
|||
| P-606 | |||
|
Reducing Stem 3/4" CTS x 1/2" CTS |
|||
| P-806 | |||
|
Reducing Union 1/2" CTS x 1/4" O.D. |
|||
| P-601 | |||
|
Reducing Union 1/2" CTS x 3/8" CTS |
|||
| P-602 | |||
|
Reducing Union 3/4" CTS x 1/2" CTS |
|||
| P-801 | |||
|
Reducing Union Elbow 3/4" CTS x 1/2" CTS |
|||
| P-826 | |||
|
Reducing Valve 1/2" CTS x 1/4" O.D. |
|||
| P-652 | |||
|
Return End 1" CTS |
|||
| P-1078 | |||
|
Single Stem Body Right 1" CTS x 1/2" CTS |
|||
| P-1088 | |||
|
Single Union Body 1" CTS x 1/2" CTS |
|||
| P-1089 | |||
|
Stackable Branch Tee 1/2" CTS |
|||
| P-964 | |||
|
Stackable Elbow 1/2" CTS |
|||
| P-636 | |||
|
Stackable Elbow 3/4" CTS |
|||
| P-836 | |||
|
Stackable Elbow 3/8" CTS |
|||
| P-428 | |||
|
Stackable Tee 1/2" CTS |
|||
| P-648 | |||
|
Stackable Tee 3/4" CTS |
|||
| P-848 | |||
|
Stackable Tee 3/8" CTS |
|||
| P-448 | |||
|
Stackable Valve 1/2" CTS |
|||
| P-669 | |||
|
Tee Valve 1/2" CTS x 3/8" CTS |
|||
| P-689 | |||
|
Tee Valve 3/4" CTS x 1/4" O.D. |
|||
| P-867 | |||
|
Union Connector 1" CTS |
|||
| P-1000 | |||
|
Union Connector 1/2" CTS |
|||
| P-600 | |||
|
Union Connector 3/4" CTS |
|||
| P-800 | |||
|
Union Connector 3/8" CTS |
|||
| P-400 | |||
|
Union Elbow 1" CTS |
|||
| P-1020 | |||
|
Union Elbow 1/2" CTS |
|||
| P-620 | |||
|
Union Elbow 3/4" CTS |
|||
| P-820 | |||
|
Union Elbow 3/8" CTS |
|||
| P-420 | |||
|
Union Tee 1" CTS |
|||
| P-1040 | |||
|
Union Tee 1/2" CTS |
|||
| P-640 | |||
|
Union Tee 3/4" CTS |
|||
| P-840 | |||
|
Union Tee 3/8" CTS |
|||
| P-440 | |||
|
Valved Tee 1/2" NPS x 1/2" NPT x 3/8" CTS |
|||
| P-686 | |||
# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard and intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. % Fittings Certified for use with solid wall or 5 layer PEX only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Fittings# % ˘ ++ [G] |
MLTPL |
35 Series Fitting |
CSA B137.5 |
|
Drop Ear Elbow 1/2" CTS x 1/2" NPT |
|||
| P-638 | |||
|
Dual Stem Body 1" CTS |
|||
| P-1079 | |||
|
Dual Union Body 1" CTS |
|||
| P-1077 | |||
|
End Stop 1" CTS |
|||
| P-1070 | |||
|
End Stop 1/2" CTS |
|||
| P-670 | |||
|
End Stop 3/4" CTS |
|||
| P-870 | |||
|
End Stop 3/8" CTS |
|||
| P-470 | |||
|
Female Connector 1" CTS x 1" NPS |
|||
| P-1015 | |||
|
Female Connector 3/4" CTS x 3/4" NPS |
|||
| P-815 | |||
|
Female Stem 1/2" CTS x 1/2" NPS |
|||
| P-605 | |||
|
Female Swivel Connector 1/2" CTS x 1/2" NPS |
|||
| P-615 | |||
|
Female Swivel Connector 1/2" CTS x 3/4" CLOSET |
|||
| P-616 | |||
|
Female Swivel Connector 1/2" CTS x 3/4" FGHT |
|||
| P-618 | |||
|
Female Swivel Connector 1/2" CTS x 3/4" NPS |
|||
| P-617 | |||
|
Female Swivel Elbow 1/2" CTS x 1/2" NPS |
|||
| P-635 | |||
|
Female Swivel Elbow 1/2" CTS x 3/4" CLOSET |
|||
| P-639 | |||
|
Female Swivel Elbow 1/2" CTS x 3/4" FGHT |
|||
| P-632 | |||
|
Female Swivel Elbow 1/2" CTS x 3/4" NPS |
|||
| P-637 | |||
|
Female Swivel Elbow 3/8" CTS x 1/2" NPS |
|||
| P-436 | |||
|
Female Swivel Elbow 3/8" CTS x 3/4" CLOSET |
|||
| P-472 | |||
|
Hose Barb Fitting 1/2" CTS x 1/2" HOSE |
|||
| P-608 | |||
|
In-Line Valve 1/2" CTS |
|||
| P-650 | |||
|
In-Line Valve 3/4" CTS |
|||
| P-866 | |||
|
In-Line Valve 3/8" CTS |
|||
| P-450 | |||
|
Male Connector 1" CTS x 1" NPT |
|||
| P-1010 | |||
|
Male Connector 1/2" CTS x 1/2" NPT |
|||
| P-610 | |||
|
Male Connector 1/2" CTS x 3/4" MGHT |
|||
| P-614 | |||
|
Male Connector 1/2" CTS x 3/4" NPT |
|||
| P-613 | |||
|
Male Connector 1/2" CTS x 3/8" NPT |
|||
| P-609 | |||
|
Male Connector 3/4" CTS x 3/4" NPT |
|||
| P-810 | |||
|
Male Connector 3/4" CTS x 3/8" NPT |
|||
| P-410 | |||
|
Male Connector 3/8" CTS x 1/2" NPT |
|||
| P-412 | |||
|
Male Elbow 1/2" CTS x 1/2" NPT |
|||
| P-630 | |||
|
Male Elbow 1/2" CTS x 3/8" NPT |
|||
| P-631 | |||
|
Male Stem 1/2" CTS x 1/2" NPT |
|||
| P-604 | |||
|
Male Thread Tee 1/2" CTS x 1/2" NPT |
|||
| P-642 | |||
|
Reducing Branch Tee 1/2" CTS x 1/4" O.D. |
|||
| P-641 | |||
|
Reducing Branch Tee 3/4" CTS x 1/2" CTS |
|||
| P-841 | |||
|
Reducing Stackable Valve 1/2" CTS x 1/4" O.D. |
|||
| P-668 | |||
|
Reducing Stem 1" CTS x 1/2" CTS |
|||
| P-1018 | |||
|
Reducing Stem 1" CTS x 3/4" CTS |
|||
| P-1019 | |||
|
Reducing Stem 1/2" CTS x 3/8" CTS |
|||
| P-606 | |||
|
Reducing Stem 3/4" CTS x 1/2" CTS |
|||
| P-806 | |||
|
Reducing Union 1/2" CTS x 1/4" O.D. |
|||
| P-601 | |||
|
Reducing Union 1/2" CTS x 3/8" CTS |
|||
| P-602 | |||
|
Reducing Union 3/4" CTS x 1/2" CTS |
|||
| P-801 | |||
|
Reducing Union Elbow 3/4" CTS x 1/2" CTS |
|||
| P-826 | |||
|
Reducing Valve 1/2" CTS x 1/4" O.D. |
|||
| P-652 | |||
|
Return End 1" CTS |
|||
| P-1078 | |||
|
Single Stem Body Right 1" CTS x 1/2" CTS |
|||
| P-1088 | |||
|
Single Union Body 1" CTS x 1/2" CTS |
|||
| P-1089 | |||
|
Stackable Branch Tee 1/2" CTS |
|||
| P-964 | |||
|
Stackable Elbow 1/2" CTS |
|||
| P-636 | |||
|
Stackable Elbow 3/4" CTS |
|||
| P-836 | |||
|
Stackable Elbow 3/8" CTS |
|||
| P-428 | |||
|
Stackable Tee 1/2" CTS |
|||
| P-648 | |||
|
Stackable Tee 3/4" CTS |
|||
| P-848 | |||
|
Stackable Tee 3/8" CTS |
|||
| P-448 | |||
|
Stackable Valve 1/2" CTS |
|||
| P-669 | |||
|
Tee Valve 1/2" CTS x 3/8" CTS |
|||
| P-689 | |||
|
Tee Valve 3/4" CTS x 1/4" O.D. |
|||
| P-867 | |||
|
Union Connector 1" CTS |
|||
| P-1000 | |||
|
Union Connector 1/2" CTS |
|||
| P-600 | |||
|
Union Connector 3/4" CTS |
|||
| P-800 | |||
|
Union Connector 3/8" CTS |
|||
| P-400 | |||
|
Union Elbow 1" CTS |
|||
| P-1020 | |||
|
Union Elbow 1/2" CTS |
|||
| P-620 | |||
|
Union Elbow 3/4" CTS |
|||
| P-820 | |||
|
Union Elbow 3/8" CTS |
|||
| P-420 | |||
|
Union Tee 1" CTS |
|||
| P-1040 | |||
|
Union Tee 1/2" CTS |
|||
| P-640 | |||
|
Union Tee 3/4" CTS |
|||
| P-840 | |||
|
Union Tee 3/8" CTS |
|||
| P-440 | |||
|
Valved Tee 1/2" NPS x 1/2" NPT x 3/8" CTS |
|||
| P-686 | |||
# Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic radiant heating system made in accordance with the current version of the ASTM F877 standard and intended for a maximum 100 psi water service and a maximum working temperature of 180°F. System components consist of tubing and/or fittings. % Fittings Certified for use with solid wall or 5 layer PEX only. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. ++ Material complies with NSF/ANSI 61 health effects requirements when tested at temperatures up to and including Domestic Hot (140° F). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
|||
Number of matching Manufacturers is 1
Number of matching Products is 150
Processing time was 0 seconds