These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?Standard=014&LowLead=Y&


NSF/ANSI 14
Plastics Piping System Components and Related Materials

Click here for a list of End Use Code Designations.

Click on Product Standards or footnote in blue to view the referenced document


 
A.Y. McDonald Mfg. Co. 
4800 Chavenelle Road
Dubuque, IA 52004-0508 
United States 
800-292-2737

Facility : Shanghai, China

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings˘ § ++ [G]
MLTPL
Copper Push Fit
ASTM F877

Copper Push Fit Adapter
2100CF 1/2" - QC x FNPT 2100CM 1/2" - QC x MNPT 2100CF 1/2" x 3/4" - QC x FNPT 2100CM 1/2" x 3/4" QC x MNPT
2100CF 3/4" - QC x FNPT 2100CM 3/4" - QC x MNPT 2100CF 1" - QC x FNPT 2100CM 1" - QC x MNPT
2100CM 1" x 3/4" - QC x MNPT

Copper Push Fit Coupling
2100C 1/2" - QC 2100C 3/4" - QC 2100C 3/4" x 1/2" - QC 2100C 1" - QC
2100C 1" x 3/4" - QC

Copper Push Fit Elbow
2190C 1/2" - QC 2190CF 1/2" - QC x FNPT 2190CM 1/2" - QC x MNPT 2190C 3/4" - QC
2190C 3/4" x 1/2" - QC 2190C 1" - QC 2190C 1" x 3/4" - QC

Copper Push Fit End Cap
2103C 1/2" - QC 2103C 3/4" - QC 2103C 1" - QC

Copper Push Fit Tee
2130C 1/2" - QC 2130C 3/4" - QC 2130C 3/4" x 1/2" - QC 2130C 3/4" x 1/2" x 3/4" - QC
2130C 3/4" x 3/4" x 1/2" - QC 2130C 1" - QC 2130C 1" x 3/4" - QC 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § ++ [G]
MLTPL
Copper Push Fit
CSA B137.5

Copper Push Fit Adapter
2100CF 1/2" - QC x FNPT 2100CM 1/2" - QC x MNPT 2100CF 1/2" x 3/4" - QC x FNPT 2100CM 1/2" x 3/4" QC x MNPT
2100CF 3/4" - QC x FNPT 2100CM 3/4" - QC x MNPT 2100CF 1" - QC x FNPT 2100CM 1" - QC x MNPT
2100CM 1" x 3/4" - QC x MNPT

Copper Push Fit Coupling
2100C 1/2" - QC 2100C 3/4" - QC 2100C 3/4" x 1/2" - QC 2100C 1" - QC
2100C 1" x 3/4" - QC

Copper Push Fit Elbow
2190C 1/2" - QC 2190CF 1/2" - QC x FNPT 2190CM 1/2" - QC x MNPT 2190C 3/4" - QC
2190C 3/4" x 1/2" - QC 2190C 1" - QC 2190C 1" x 3/4" - QC

Copper Push Fit End Cap
2103C 1/2" - QC 2103C 3/4" - QC 2103C 1" - QC

Copper Push Fit Tee
2130C 1/2" - QC 2130C 3/4" - QC 2130C 3/4" x 1/2" - QC 2130C 3/4" x 1/2" x 3/4" - QC
2130C 3/4" x 3/4" x 1/2" - QC 2130C 1" - QC 2130C 1" x 3/4" - QC 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § [G]
MLTPL
Push Fit
ASTM F877

Push Fit Adapter, Push Fit x MPT
2100AM 1/2" 2100AM 3/4"

Push Fit Coupling
2100A 1/2" 2100A 3/4" 2100A 3/4" x 1/2"

Push Fit Elbow
2190A 1/2" 2190A 3/4"

Push Fit Tee
2130A 1/2" 2130A 3/4" 2130A 3/4" x 1/2"

Push Fit Test Cap
2103A 1/2" 2103A 3/4" 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § [G]
MLTPL
Push Fit
CSA B137.5

Push Fit Adapter, UniGrip x MPT
2100AM 1/2" 2100AM 3/4"

Push Fit Coupling
2100A 1/2" 2100A 3/4" 2100A 3/4" x 1/2"

Push Fit Elbow
2190A 1/2" 2190A 3/4"

Push Fit Tee
2130A 1/2" 2130A 3/4" 2130A 3/4" x 1/2"

Push Fit Test Cap
2103A 1/2" 2103A 3/4" 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
A.Y. McDonald Mfg. Co. 
4800 Chavenelle Road
Dubuque, IA 52002 
United States 
563-583-7311

Facility : Zhejiang Province, China

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+ § [G]
PPSU
UNIPEX
ASTM F2159

Plastic Adapter
1/2" PEX x 1/2" MPT (2400M) 3/4" PEX x 3/4" MPT (2400M) 3/4" PEX x 1/2" MPT (2400M)  1" PEX x 1" MPT (2400M)
1/2" PEX x 3/4" MPT (2400M) 

Plastic Elbow
1/2" PEX x 1/2" MPT (2491)  1/2" PEX x 3/8" MPT (2491)  3/4" PEX x 1/2" MPT (2491)  3/4" PEX x 3/4" MPT (2491) 

Plastic PEX Coupling
3/4" x 1/2" (2400) 1/2" (2400) 3/4" (2400) 1" x 3/4" (2400)
1" (2400) 1" x 1/2" (2400) 

Plastic PEX Elbow
3/4" x 1/2" (2490) 1/2" (2490) 3/4" (2490) 1" (2490)

Plastic PEX Plug
3/8" (2402)  1/2" (2402)  3/4" (2402) 1" (2402)

Plastic PEX Tee
1/2" (2430) 1/2" x 1/2" x 3/4" (2430) 3/4" (2430) 3/4" x 1/2" x 1/2" (2430)
3/4" x 1/2" x 3/4" (2430) 3/4" x 3/4" x 1/2" (2430) 1" (2430) 3/4" x 3/4" x 1" (2430) 
1" x 3/4" x 3/4" (2430) 1" x 3/4" x 1" (2430) 1" x 1" x 1/2" (2430) 1" x 1" x 3/4" (2430)

Plastic Swivel Adapter
1/2" PEX x 1/2" FPT (2400F) 3/4" PEX x 3/4" FPT (2400F)

Plastic Swivel Elbow
1/2" PEX x 1/2" FPT (2492) 3/4" PEX x 3/4" FPT (2492)  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ § [G]
PPSU
UNIPEX
ASTM F877

Plastic Adapter
1/2" PEX x 1/2" MPT (2400M) 3/4" PEX x 3/4" MPT (2400M) 3/4" PEX x 1/2" MPT (2400M)  1/2" PEX x 3/4" MPT (2400M) 
1" PEX x 1" MPT (2400M)

Plastic Elbow
1/2" PEX x 3/8" MPT (2491)  1/2" PEX x 1/2" MPT (2491)  3/4" PEX x 1/2" MPT (2491)  3/4" PEX x 3/4" MPT (2491) 

Plastic PEX Coupling
3/4" x 1/2" (2400) 1/2" (2400) 3/4" (2400) 1" x 3/4" (2400)
1" (2400) 1" x 1/2" (2400) 

Plastic PEX Elbow
3/4" x 1/2" (2490) 1/2" (2490) 3/4" (2490) 1" (2490)

Plastic PEX Plug
3/8" (2402)  1/2" (2402)  3/4" (2402) 1" (2402)

Plastic PEX Tee
1/2" (2430) 1/2" x 1/2" x 3/4" (2430) 3/4" (2430) 3/4" x 1/2" x 1/2" (2430)
3/4" x 1/2" x 3/4" (2430) 3/4" x 3/4" x 1/2" (2430) 3/4" x 3/4" x 1" (2430)  1" (2430)
1" x 3/4" x 3/4" (2430) 1" x 3/4" x 1" (2430) 1" x 1" x 1/2" (2430) 1" x 1" x 3/4" (2430)

Plastic Swivel Adapter
1/2" PEX x 1/2" FPT (2400F) 3/4" PEX x 3/4" FPT (2400F)

Plastic Swivel Elbow
1/2" PEX x 1/2" FPT (2492) 3/4" PEX x 3/4" FPT (2492)  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ ˘ § [G]
PPSU
UNIPEX
CSA B137.5

Plastic Adapter
1/2" PEX x 1/2" MPT (2400M) 3/4" PEX x 3/4" MPT (2400M) 3/4" PEX x 1/2" MPT (2400M)  1/2" PEX x 3/4" MPT (2400M) 
1" PEX x 1" MPT (2400M)

Plastic Elbow
1/2" PEX x 1/2" MPT (2491)  1/2" PEX x 3/8" MPT (2491)  3/4" PEX x 1/2" MPT (2491)  3/4" PEX x 3/4" MPT (2491) 

Plastic PEX Coupling
3/4" x 1/2" (2400) 1/2" (2400) 3/4" (2400) 1" x 3/4" (2400)
1" (2400) 1" x 1/2" (2400) 

Plastic PEX Elbow
3/4" x 1/2" (2490) 1/2" (2490) 3/4" (2490) 1" (2490)

Plastic PEX Plug
3/8" (2402)  1/2" (2402)  3/4" (2402) 1" (2402)

Plastic PEX Tee
1/2" (2430) 1/2" x 1/2" x 3/4" (2430) 3/4" (2430) 3/4" x 1/2" x 1/2" (2430)
3/4" x 1/2" x 3/4" (2430) 3/4" x 3/4" x 1/2" (2430) 3/4" x 3/4" x 1" (2430)  1" (2430)
1" x 3/4" x 3/4" (2430) 1" x 3/4" x 1" (2430) 1" x 1" x 1/2" (2430) 1" x 1" x 3/4" (2430)

Plastic Swivel Adapter
1/2" PEX x 1/2" FPT (2400F) 3/4" PEX x 3/4" FPT (2400F)

Plastic Swivel Elbow
1/2" PEX x 1/2" FPT (2492) 3/4" PEX x 3/4" FPT (2492)  

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
ABRO Industries, Inc. 
3580 Blackthorn Court
South Bend, IN 46628 
United States 
574-232-8289

Facility : # 1 USA

Joining Materials

Product Type General Material   For Use With Trade Name Product Standard
Solvent Cement (1,2,3)+++ [G] CPVC PW ABRO CPVC Orange Cement Z14 ASTM F493
Solvent Cement (1,2,3)+++ [G] CPVC PW CPVC 914-21 Heavy Duty Orange Cement ASTM F493
Solvent Cement (1,2,3)+ [G] PVC PW, DWV, SW PVC 717-21 Heavy Duty Clear Cement ASTM D2564
Solvent Cement (1,2,3)[G] PVC PW, DWV, SW PVC 700-21 Medium Duty Clear Cement ASTM D2564
Solvent Cement+++ [G] CPVC PW, DWV Goldgard Z14 for CPVC Orange Cement ASTM F493 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


(1) This product was evaluated by NSF according to the requirements of NSF/ANSI Standard 61,
    Section 4.
(2) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and P-70 and P-72 Primers.
(3) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.

 
Advanced Drainage Systems, Inc. 
4640 Trueman Boulevard
Hilliard, OH 43026 
United States 
800-733-7473 
614-658-0050
Visit this company's website

Facility : Perry, GA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Waverly, NY

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Findlay, OH

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 7.3
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2737
1/2" - 2" SDR 7.3
1/2" - 2" SDR 9
1/2" - 2" SDR 11 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Washougal, WA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2239
1/2" - 2" SIDR 5.3
1/2" - 2" SIDR 7
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11.5
1/2" - 2" SIDR 15
1/2" - 2" SIDR 19 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe+ [G]
PE 3608
ADS PolyFlex
ASTM D2737
1/2" - 2" SIDR 7.3
1/2" - 2" SIDR 9
1/2" - 2" SIDR 11 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
Allen Co. 
14077 Cedar Road
Cleveland, OH 44118 
United States 
216-932-6100

Facility : Allen Co. USA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Pipe# % ^ § ++ [G]
PEX 1006
ALLCO PEX SUPREME
ASTM F876/F877
1/4" - 1 1/4" SDR 9 

# Product is authorized for white, blue, red, and terra-cotta colors.
% Product tested and Certified for Cold 23 (73°F) and Domestic Hot (140°F) applications
  only.
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe# % ^ ˘ § ++ [G]
PEX 1006
ALLCO PEX SUPREME
CSA B137.5
1/4" - 1 1/4" SDR 9 

# Product is authorized for white, blue, red, and terra-cotta colors.
% Product tested and Certified for Cold 23 (73°F) and Domestic Hot (140°F) applications
  only.
^ Meets the Chlorine Resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
Alpha Pipe Fittings Ltd. 
624 Neal Drive
Peterborough, ON K9J 6X7 
Canada 
800-465-1114 
705-741-0220

Facility : Peterborough, Ontario, Canada

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+ [G]
PP
APF
ASTM D2609

Adapters, Barb x MPT
1/2" thru 4" 1/2" x 3/4" 1" x 1 1/4" 3/4" x 1"
1" x 1 1/2" 3/4" x 1 1/4" 1 1/4" x 1 1/2" 1 1/2" x 2"

Coupling, Barb x Barb
1/2" thru 4" 1/2" x 3/4" 1" x 1 1/4" 1/2" x 1"
1" x 1 1/2" 3/4" x 1" 1" x 2" 3/4" x 1 1/4"
1 1/4" x 1 1/2" 3/4" x 1 1/2" 1 1/4" x 2" 1 1/2" x 2"

90° Ell, Barb x Barb
1/2" thru 2"

90° Ell, Barb x MPT
1/2" thru 2"

Poly Insert Plug, (Barb)
1 1/4" 1 1/2" 2"

Tee, Barb x Barb x Barb
1/2" thru 2" 3/4" x 3/4" x˝" 1" x 1" x 3/4" 1Ľ" x 1Ľ" x 3/4"
1" x 1" x ˝" 1Ľ" x 1Ľ" x ˝" 1Ľ" x 1Ľ" x 1" 1˝" x 1˝" x ˝"
2" x 2" x ˝" 1˝" x 1˝" x 3/4" 2" x 2" x 3/4" 1˝" x 1˝" x 1"
2" x 2" x 1" 1˝" x 1˝" x 1Ľ" 2" x 2" x 1Ľ" 2" x 2" x 1˝"
3/4" x ˝" x ˝" 1˝" x 1Ľ" x ˝" 1" x 3/4" x ˝" 1˝" x 1Ľ" x 1"
1" x 3/4" x 3/4" 1˝" x 1Ľ" x 1Ľ" 1Ľ" x 1" x ˝" 2" x 1˝" x 1˝"
1Ľ" x 1" x 3/4" 1Ľ" x 1" x 1" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
NP
APF
ASTM D2609

Adapters (Barb x MPT)
1/2" thru 2"

Nylon Insert Venturi Adapter (Insert x MPT)
1Ľ"

Nylon Reducing Adapt (Barb x MPT)
1" x 1˝" 1/2" x 3/4" 3/4" x 1Ľ" 1" x 1Ľ"
1Ľ" x 1˝" 3/4" x 1" 1˝" x 2"

Coupling (Barb x Barb)
1/2" thru 2"

Nylon Reducing Coupling (Barb x Barb)
1" x 1˝" 1Ľ" x 1˝" 1/2" x 3/4" 3/4" x 1"
3/4" x 1˝" 1" x 1Ľ" 1" x 2" 1Ľ" x 2"
1/2" x 1" 3/4" x 1Ľ" 1˝" x 2"

90° EII (Barb x Barb)
1/2" thru 2"

90° EII (Barb x MPT)
1/2" thru 1˝"

Nylon Insert Plug (Barb)
1Ľ" 1˝" 2"

Tee (Barb x Barb x Barb)
1/2" thru 2"

Nylon Reducing Tee (Barb x Barb x Barb)
1" x 1" x 1/2" 2" x 2" x 1" 3/4" x 1/2" x 1/2" 1" x 3/4" x 3/4"
3/4" x 3/4" x 1/2" 1˝" x 1˝" x 3/4" 1" x 1" x 3/4" 2" x 2" 3/4"
1" x 3/4" x 1/2" 1˝" x 1˝" x 1/2" 1˝" x 1˝" x 1" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PVC
APF
ASTM D2609

Reducing Elbow (Barb x FIPT)
˝" x 3/4"

Coupling (Barb x Barb)
3/4" x 3/4" ˝" x ˝" 1" x 1"

Reducing Coupling (Insert x Insert)
3/4" x 1/2" 1" x 1/2" 1" x 3/4"

Reducing Tee (Barb x Barb x FIPT)
3/4"x 3/4"x ˝" 1" x 1" x 1/2" 1" x 1" x 3/4"

Reducing Elbow (Barb x FIPT)
3/4" x 1/2" 1" x 1/2" 1" x 3/4"

Female Adapter (Barb x FIPT)
1/2" x 1/2" 3/4" x 3/4" 1" x 1" 1 1/4" x 1 1/4"
1 1/2" x 1 1/2" 2" x 2"

Male Reducing Adapter (MIPT x Insert)
1/2" x 1" 1/2" 3/4" 3/4" x 1/2" 3/4" x 1"
1" x 3/4"

Male Adapter (MIPT x Barb)
3/4" x 3/4" ˝" x ˝" 1" x 1"

Tee, (Barb x Barb x FIPT)
1/2" x 1/2" x 1/2" 3/4" x 3/4" x 3/4" 1" x 1" x 1"

Elbow, (Barb x FIPT)
1/2" x 1/2" 3/4" x 3/4" 1" x 1"

Insert Plug, (Barb)
1/2" 3/4" 1" 1 1/4" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
American Granby Inc. 
7645 Henry Clay Boulevard
Liverpool, NY 13088-7000 
United States 
315-451-1100

Facility : Jiangsu, China

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Valves (PW)+ @ [G]
PVC I-G1
Granby
ASTM F1970

Compact Ball Valves - Solvent Weld
HMIP50SE 1/2" HMIP75SE 3/4" HMIP100SE 1" HMIP125SE 1 1/4"
HMIP150SE 1 1/2" HMIP200SE 2"

Compact Ball Valves - Threaded
HMIP50TE 1/2" HMIP75TE 3/4" HMIP100TE 1" HMIP125TE 1 1/4"
HMIP150TE 1 1/2" HMIP200TE 2" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Taichung, Taiwan

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Valves (PW)+ @ [G]
PVC I-G1
American Granby
ASTM F1970

Compact Ball Valves - Solvent Weld
HMIP50S 1/2" HMIP50SE 1/2" HMIP75S 3/4" HMIP75SE 3/4"
HMIP100S 1" HMIP100SE 1" HMIP125S 1 1/4" HMIP125SE 1 1/4"
HMIP150S 1 1/2" HMIP150SE 1 1/2" HMIP200S 2" HMIP200SE 2"

Compact Ball Valves - Threaded
HMIP50T 1/2" HMIP50TE 1/2" HMIP75T 3/4" HMIP75TE 3/4"
HMIP100T 1" HMIP100TE 1" HMIP125T 1 1/4" HMIP125TE 1 1/4"
HMIP150T 1 1/2" HMIP150TE 1 1/2" HMIP200T 2" HMIP200TE 2" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
American Valve Inc. 
4321 Piedmont Parkway
Greensboro, NC 27410 
United States 
336-668-0554

Facility : # 1 China

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Valves (PW)+ @ [G]
PVC I-G1
P200S
ASTM F1970

Compact Ball Valves - Solvent Weld
1/2" thru 2" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Valves (PW)+ @ [G]
PVC I-G1
P200
ASTM F1970

Compact Ball Valves - Threaded
1/2" thru 2" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150psi at 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Taichung, Taiwan

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Valves (PW)+ @ [G]
PVC I-G1
American Valve
ASTM F1970

Compact Ball Valves - Solvent Weld
P201S 1/2" P201S 3/4" P201S 1" P201S 1 1/4"
P201S 1 1/2" P201S 2"

Compact Ball Valves - Threaded
P201 1/2" P201 3/4" P201 1" P201 1 1/4"
P201 1 1/2" P201 2" 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
Anderson Fittings 
4325 Frontage Road
Oak Forest, IL 60452 
United States 
800-323-5284 
815-469-8201
Visit this company's website

Facility : # 3 USA

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings˘ § +++ [G]
Brass
AF PEX LEADFREE
ASTM F1807

MPT x PEX Barb Elbow
3/8" - 2"

PEX Barb Elbow
3/8" - 2"

PEX Barb Reducing Elbow
3/8" - 2"

PEX Barb Reducing Tee
3/8" - 2"

PEX Barb Tee
3/8" - 2"

PEX Barb x Cu Sweat Elbow
3/8" - 2" 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
Brass
AF PEX LEADFREE
CSA B137.5

MPT x PEX Barb Elbow
3/8" - 2"

PEX Barb Elbow
3/8" - 2"

PEX Barb Reducing Elbow
3/8" - 2"

PEX Barb Reducing Tee
3/8" - 2"

PEX Barb Tee
3/8" - 2"

PEX Barb x Cu Sweat Elbow
3/8" - 2" 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Frankfort, IL

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings˘ § +++ [G]
Brass
AF PEX LEADFREE
ASTM F1807

MPT x PEX Barb Elbow
3/8" - 2"

Male Sweat x PEX Barb
3/8" - 2"

PEX Barb Adapter
3/8" - 2"

PEX Barb Coupling
3/8" - 2"

PEX Barb Elbow
3/8" - 2"

PEX Barb Plug
3/8" - 2"

PEX Barb Reducing Coupling
3/8" - 2"

PEX Barb Reducing Elbow
3/8" - 2"

PEX Barb Reducing Tee
3/8" - 2"

PEX Barb Tee
3/8" - 2"

PEX Barb x Cu Sweat Elbow
3/8" - 2"

PEX Barb x FIP Swivel Adapter
3/8" - 2"

PEX Barb x FPT Adapter
3/8" - 2"

PEX Barb x Female Sweat Adapter
3/8" - 2"

PEX Barb x MPT Adapter
3/8" - 2"

PEX Barb x Swivel Adapter
3/8" - 2"

Plug Seal Manifold
3/8" - 2" 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ § +++ [G]
Brass
AF PEX LEADFREE
CSA B137.5

MPT x PEX Barb Elbow
3/8" - 2"

Male Sweat x PEX Barb
3/8" - 2"

PEX Barb Adapter
3/8" - 2"

PEX Barb Coupling
3/8" - 2"

PEX Barb Elbow
3/8" - 2"

PEX Barb Plug
3/8" - 2"

PEX Barb Reducing Coupling
3/8" - 2"

PEX Barb Reducing Elbow
3/8" - 2"

PEX Barb Reducing Tee
3/8" - 2"

PEX Barb Tee
3/8" - 2"

PEX Barb x Cu Sweat Elbow
3/8" - 2"

PEX Barb x FIP Swivel Adapter
3/8" - 2"

PEX Barb x FPT Adapter
3/8" - 2"

PEX Barb x Female Sweat Adapter
3/8" - 2"

PEX Barb x MPT Adapter
3/8" - 2"

PEX Barb x Swivel Adapter
3/8" - 2"

Plug Seal Manifold
3/8" - 2" 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


 
Aquatherm GmbH 
Biggen 5
D-57439 Attendorn 
Germany 
49 27 22 950 0
Visit this company's website

Facility : Attendorn, Germany

Potable Water - Pipe and Fittings

Product Type Material Type Trade Name Product Standard

Fittings+++ [G]
MLTPL
Aquatherm Greenpipe® - NPT
ASTM F2389

Threaded Back plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP 0620110 (1/2" - 20mm) x 3/4" FIP 0620112 (3/4" - 25mm) x 3/4" FIP 0620113 (3/4" - 25mm) x 1/2" FIP 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
MLTPL
Aquatherm Greenpipe® - Wing Back 90 Elbow
ASTM F2389
0620158 (1/2" - 20mm) x 1/2" FIP 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
MLTPL
Aquatherm Greenpipe® Transition Piece
ASTM F2389
0621008 (1/2" - 20mm) x 1/2" FIP 0621010 (1/2" - 20mm) x 3/4" FIP 0621011 (3/4" - 25mm) x 1/2" FIP 0621012 (3/4" - 25mm) x 3/4" FIP
0621013 (1" - 32mm) x 3/4" FIP 0621108 (1/2" - 20mm) x 1/2" FIP 0621110 (1/2" - 20mm) x 3/4" FIP 0621111 (3/4" - 25mm) x 1/2" FIP
0621112 (3/4" - 25mm) x 3/4" FIP 0621113 (1" - 32mm) x 3/4" FIP 0621114 (1" - 32mm) x 1" FIP 0621115 (1 1/4" - 40mm) x 1" FIP
0621116 (1 1/4" - 40mm) x 1 1/4" FIP 0621117 (1 1/2" - 50mm) x 1 1/4" FIP 0621118 (1.5" - 50mm) x 1.5" FIP 0621119 (2" - 63mm) x 1.5" FIP
0621120 (2" - 63mm) x 2" FIP 0621122 (2.5" - 75mm) x 2" FIP 0621208 (1/2" - 20mm) x 1/2" MIP 0621210 (1/2" - 20mm) x 3/4" MIP
0621211 (3/4" - 25mm) x 1/2" MIP 0621212 (3/4" - 25mm) x 3/4" MIP 0621213 (1" - 32mm) x 3/4" MIP 0621308 (1/2" - 20mm) x 1/2" MIP
0621310 (1/2" - 20mm) x 3/4" MIP 0621312 (3/4" - 25mm) x 3/4" MIP 0621314 (1" - 32mm) x 1" MIP 0621316 (1" - 32mm) x 1.25" MIP
0621317 (1 1/4" - 40mm) x 1" MIP 0621318 (1.25" - 40mm) x 1.25" MIP 0621319 (1.5" - 50mm) x 1.25" MIP 0621320 (1.5" - 50mm) x 1.5" MIP
0621321 (2" - 63mm) x 1.5" MIP 0621322 (2" - 63mm) x 2" MIP 0621323 (2.5" - 75mm) x 2" MIP 0621324 (2.5" - 75mm) x 2.5" MIP
0621325 (3" - 90mm) x 3" MIP 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
MLTPL
Aquatherm Greenpipe® - Transition Elbow
ASTM F2389
0623008 (1/2" - 20mm) x 3/4" FIP NPT 0623010 (1/2" - 20mm) x 1/2" FIP NPT 0623012 (3/4" - 25mm) x 3/4" FIP NPT 0623014 (3/4" - 25mm) x 1/2" FIP NPT
0623016 (1" - 32mm) x 3/4" FIP NPT 0623018 (1" - 32mm) x 1" FIP NPT 0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female 0623506 (1/2" - 20mm) x 1/2" MIP NPT
0623508 (1/2" - 20mm) x 3/4" MIP NPT 0623510 (3/4" - 25mm) x 3/4" MIP NPT 0623512 (1" - 32mm) x 3/4" MIP NPT 0623514 (1" - 32mm) x 1" MIP NPT 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
MLTPL
Aquatherm Greenpipe® - Transition Tee
ASTM F2389
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP 0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP 0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP 0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP 0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP 0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP 0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
MLTPL
Aquatherm Greenpipe® - Fusion Outlet
ASTM F2389
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP) 0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP) 0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP) 0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP) 0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP) 0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP) 0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP) 0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP) 0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP) 0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP) 0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP) 0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP) 0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP) 0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP) 0628260 (2.5" / 1" - 75 / 32mm x 1" FIP) 0628262 (3" / 1" - 90 / 32mm x 1" FIP)
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP) 0628266 (4" x 1" - 125 / 32mm x 1" FIP) 0628270 (6" / 1" - 160 / 32mm x 1" FIP) 0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP) 0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP) 0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP) 0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP) 0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP) 0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP) 0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP) 0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP) 0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP) 0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP) 0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP) 0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP) 0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ +++ [G]
MLTPL
Aquatherm Greenpipe® - NPT
CSA B137.11

Threaded Back Plate Elbow
0620108 (1/2" - 20mm) x 1/2" FIP 0620110 (1/2" - 20mm) x 3/4" FIP 0620112 (3/4" - 25mm) x 3/4" FIP 0620113 (3/4" - 25mm) x 1/2" FIP 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ +++ [G]
MLTPL
Aquatherm Greenpipe® - Wing Back 90 Elbow
CSA B137.11
0620158 (1/2" - 20mm) x 1/2" FIP 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ +++ [G]
MLTPL
Aquatherm Greenpipe® Transition Piece
CSA B137.11
0621008 (1/2" - 20mm) x 1/2" FIP 0621010 (1/2" - 20mm) x 3/4" FIP 0621011 (3/4" - 25mm) x 1/2" FIP 0621012 (3/4" - 25mm) x 3/4" FIP
0621013 (1" - 32mm) x 3/4" FIP 0621108 (1/2" - 20mm) x 1/2" FIP 0621111 (3/4" - 25mm) x 1/2" FIP 0621112 (3/4" - 25mm) x 3/4" FIP
0621113 (1" - 32mm) x 3/4" FIP 0621114 (1" - 32mm) x 1" FIP 0621115 (1 1/4" - 40mm) x 1" FIP 0621116 (1 1/4" - 40mm) x 1 1/4" FIP
0621117 (1 1/2" - 50mm) x 1 1/4" FIP 0621118 (1.5" - 50mm) x 1.5" FIP 0621119 (2" - 63mm) x 1.5" FIP 0621120 (2" - 63mm) x 2" FIP
0621122 (2.5" - 75mm) x 2" FIP 0621208 (1/2" - 20mm) x 1/2" MIP 0621210 (1/2" - 20mm) x 3/4" MIP 0621211 (3/4" - 25mm) x 1/2" MIP
0621212 (3/4" - 25mm) x 3/4" MIP 0621213 (1" - 32mm) x 3/4" MIP 0621308 (1/2" - 20mm) x 1/2" MIP 0621310 (1/2" - 20mm) x 3/4" MIP
0621312 (3/4" - 25mm) x 3/4" MIP 0621314 (1" - 32mm) x 1" MIP 0621316 (1" - 32mm) x 1.25" MIP 0621317 (1 1/4" - 40mm) x 1" MIP
0621318 (1.25" - 40mm) x 1.25" MIP 0621319 (1.5" - 50mm) x 1.25" MIP0621320 (1.5" - 50mm) x 1.5" MIP 0621320 (1.5" - 50mm) x 1.5" MIP 0621321 (2" - 63mm) x 1.5" MIP
0621322 (2" - 63mm) x 2" MIP 0621323 (2.5" - 75mm) x 2" MIP 0621324 (2.5" - 75mm) x 2.5" MIP 0621325 (3" - 90mm) x 3" MIP
0621110 (1/2" - 20mm) x 3/4" FIP 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ +++ [G]
MLTPL
Aquatherm Greenpipe® - Transition Elbow
CSA B137.11
0623008 (1/2" - 20mm) x 3/4" FIP NPT 0623010 (1/2" - 20mm) x 1/2" FIP NPT 0623012 (3/4" - 25mm) x 3/4" FIP NPT 0623014 (3/4" - 25mm) x 1/2" FIP NPT
0623016 (1" - 32mm) x 3/4" FIP NPT 0623018 (1" - 32mm) x 1" FIP NPT 0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female 0623506 (1/2" - 20mm) x 1/2" MIP NPT
0623508 (1/2" - 20mm) x 3/4" MIP NPT 0623510 (3/4" - 25mm) x 3/4" MIP NPT 0623512 (1" - 32mm) x 3/4" MIP NPT 0623514 (1" - 32mm) x 1" MIP NPT 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ +++ [G]
MLTPL
Aquatherm Greenpipe® - Transition Tee
CSA B137.11
0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP 0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP 0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP 0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP 0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP 0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP 0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings˘ +++ [G]
MLTPL
Aquatherm Greenpipe® - Fusion Outlet
CSA B137.11
0628214 (1.25" / 3/4" - 40 / 25mm x 1/2" FIP) 0628216 (1.5" / 3/4" - 50 / 25mm x 1/2" FIP) 0628218 (2" / 3/4" - 63 / 25mm x 1/2" FIP) 0628220 (2.5" / 3/4" - 75 / 25mm x 1/2" FIP)
0628222 (3" / 3/4" - 90 / 25mm x 1/2" FIP) 0628224 (3.5" / 3/4" - 110 / 25mm x 1/2" FIP) 0628226 (4" / 3/4" - 125 / 25mm x 1/2" FIP) 0628230 (6" / 3/4" - 160 / 25mm x 1/2" FIP)
0628232 (8-10" / 3/4" - 200-250 / 25mm x 1/2" FIP) 0628234 (1.25" / 3/4" - 40 / 25mm x 3/4" FIP) 0628236 (1.5" / 3/4" - 50 / 25mm x 3/4" FIP) 0628238 (2" / 3/4" - 63 / 25mm x 3/4" FIP)
0628240 (2.5" / 3/4" - 75 / 25mm x 3/4" FIP) 0628242 (3" / 3/4" - 90 / 25mm / 3/4" FIP) 0628244 (3.5" / 3/4" - 110 / 25mm / 3/4" FIP) 0628246 (4" / 3/4" - 125 / 25mm x 3/4" FIP)
0628250 (6" / 3/4" - 160 / 25mm x 3/4" FIP) 0628254 (8-10" / 3/4" - 200-250 / 25mm x 3/4" FIP) 0628260 (2.5" / 1" - 75 / 32mm x 1" FIP) 0628262 (3" / 1" - 90 / 32mm x 1" FIP)
0628264 (3.5" / 1" - 110 / 32mm x 1" FIP) 0628266 (4" x 1" - 125 / 32mm x 1" FIP) 0628270 (6" / 1" - 160 / 32mm x 1" FIP) 0628274 (8-10" / 1" - 200-250 / 32mm x 1" FIP)
0628314 (1.25" / 3/4" - 40 / 25mm x 1/2" MIP) 0628316 (1.5" / 3/4" - 50 / 25mm x 1/2" MIP) 0628318 (2" / 3/4" - 63 / 25mm x 1/2" MIP) 0628320 (2.5" / 3/4" - 75 / 25mm x 1/2" MIP)
0628322 (3" / 3/4" - 90 / 25mm x1/2" MIP) 0628324 (3.5" / 3/4" - 110 / 25mm x 1/2" MIP) 0628326 (4" / 3/4" - 125 / 25mm x 1/2" MIP) 0628330 (6" / 3/4" - 160 / 25mm x 1/2" MIP)
0628334 (1.25" / 3/4" - 40 / 25mm x 3/4" MIP) 0628336 (1.5" / 3/4" - 50 / 25mm x 3/4" MIP) 0628338 (2" / 3/4" - 63 / 25mm x 3/4" MIP) 0628340 (2.5" / 3/4" - 75 / 25mm x 3/4" MIP)
0628342 (3" / 3/4" - 90 / 25mm x 3/4" MIP) 0628344 (3.5" / 3/4" - 110 / 25mm x 3/4" MIP) 0628346 (4" / 3/4" - 125 / 25mm x 3/4" MIP) 0628350 (6" / 3/4" - 160 / 25mm x 3/4" MIP) 

˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Socket
ASTM F2389
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Reducer
ASTM F2389
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111176 (160/125 mm) SDR 7.4
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Reducing Socket
ASTM F2389
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Elbow 45°
ASTM F2389
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Elbow 90°
ASTM F2389
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Tee
ASTM F2389
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Reducing Tee
ASTM F2389
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Cross
ASTM F2389
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® End Cap
ASTM F2389
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Fusion Outlet (Saddle)
ASTM F2389
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings$ * +++ [G]
PP
Aquatherm greenpipe® Flange Adapter
ASTM F2389
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11 

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings$ * +++ [G]
PP
Aquatherm greenpipe® Flange
ASTM F2389
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm) 

$ Flanges are Listed for use with either metric or ANSI compatible flange rings.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++
PP
Aquatherm greenpipe® Coupling Screw
ASTM F2389
0115838 (Joint - PP - 20 mm)[G]

0115840 (Joint - PP - 25 mm)[G]

0115842 (Joint - PP - 32 mm)[G]

0115844 (Joint - PP - 40 mm)[G]

0115846 (Joint - PP - 50 mm)[G]

0115848 (Joint - PP - 63 mm)[G] 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).

Fittings* +++ [G]
PP
Aquatherm greenpipe® Overbridgebow
ASTM F2389
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Electrofusion
ASTM F2389
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Back Plate Elbow
ASTM F2389
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Cavity Wall
ASTM F2389
0120114 (Fitting - 1/2") 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Insulation
ASTM F2389
0120120 (Cleading for Wall Disk 1/2") 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe& * +++ [G]
PP
Aquatherm greenpipe®
ASTM F2389
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6 

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe& * +++ [G]
PP
Aquatherm greenpipe®
ASTM F2389
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4 

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe& * +++ [G]
PP
Aquatherm greenpipe® Faser
ASTM F2389
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
70742 (315 mm) SDR 7.4
70744 (355 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160 mm) SDR 7.4
0670784 (UV - 200 mm) SDR 7.4
0670788 (UV - 250 mm) SDR 7.4 

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Cavity Wall Disk
ASTM F2389
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Transition Elbow
ASTM F2389
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Transition Piece
ASTM F2389
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Adapter - Round
ASTM F2389
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Adapter - Hex
ASTM F2389
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Transition Elbow
ASTM F2389
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Transition Tee
ASTM F2389
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Adapter
ASTM F2389
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Connecting Union
ASTM F2389
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4") 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Water Meter Union
ASTM F2389
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4") 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Adapter
ASTM F2389
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2") 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Counterpart for
ASTM F2389
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Fusion Outlet (Saddle)
ASTM F2389
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200-250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Distribut. Block
ASTM F2389
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® 4-Port Manifold
ASTM F2389
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Globe Valve
ASTM F2389
0140808 (20 mm)
0140810 (25 mm)
0140812 (32 mm)
0140814 (40 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* +++ [G]
PP
Aquatherm greenpipe® Concealed Valve
ASTM F2389
0140858 (Chrome Plated - 20 mm)
0140860 (Chrome Plated - 25 mm)
0140862 (Chrome Plated - 32 mm)
0140868 (Tamper-Proof - Short - 20 mm)
0140870 (Tamper-Proof - Short - 25 mm)
0140872 (Tamper-Proof - Short - 32 mm)
0140878 (Flexible Insta. Depth - 20 mm)
0140880 (Flexible Insta. Depth - 25 mm)
0140882 (Flexible Insta. Depth - 32 mm)
0140888 (Tamper-Proof - Long - 20 mm)
0140890 (Tamper-Proof - Long - 25 mm)
0140892 (Tamper-Proof - Long - 32 mm) 

* Product may also carry the designation "Fusiotherm®".
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe& * ˘ +++ [G]
PP
Aquatherm greenpipe® Pipe
CSA B137.11
0610006 (16 mm) SDR 6
0610008 (20 mm) SDR 6
0610010 (25 mm) SDR 6
0610012 (32 mm) SDR 6
0610014 (40 mm) SDR 6
0610016 (50 mm) SDR 6
0610018 (63 mm) SDR 6
0610020 (75 mm) SDR 6
0610022 (90 mm) SDR 6
0610024 (110 mm) SDR 6
0610106 (16 mm - Coil: 100 m) SDR 6
0610108 (20 mm - Coil: 100 m) SDR 6
0610110 (25 mm - Coil: 100 m) SDR 6 

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe& * ˘ +++ [G]
PP
Aquatherm greenpipe® Pipe
CSA B137.11
0610806 (16 mm) SDR 7.4
0610808 (20 mm) SDR 7.4
0610810 (25 mm) SDR 7.4
0610812 (32 mm) SDR 7.4
0610814 (40 mm) SDR 7.4
0610816 (50 mm) SDR 7.4
0610818 (63 mm) SDR 7.4
0610820 (75 mm) SDR 7.4
0610822 (90 mm) SDR 7.4
0610824 (110 mm) SDR 7.4
0610906 (16 mm - Coil: 100 m) SDR 7.4
0610908 (20 mm - Coil: 100 m) SDR 7.4 

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe& * ˘ +++ [G]
PP
Aquatherm greenpipe® Faser
CSA B137.11
0670708 (20 mm) SDR 7.4
0670710 (25 mm) SDR 7.4
0670712 (32 mm) SDR 7.4
0670714 (40 mm) SDR 7.4
0670716 (50 mm) SDR 7.4
0670718 (63 mm) SDR 7.4
0670720 (75 mm) SDR 7.4
0670722 (90 mm) SDR 7.4
0670724 (110 mm) SDR 7.4
0670726 (125 mm) SDR 7.4
0670730 (160 mm) SDR 7.4
0670734 (200 mm) SDR 7.4
0670738 (250 mm) SDR 7.4
0670758 (UV - 20 mm) SDR 7.4
0670760 (UV - 25 mm) SDR 7.4
0670762 (UV - 32 mm) SDR 7.4
0670764 (UV - 40 mm) SDR 7.4
0670766 (UV - 50 mm) SDR 7.4
0670768 (UV - 63 mm) SDR 7.4
0670770 (UV - 75 mm) SDR 7.4
0670772 (UV - 90 mm) SDR 7.4
0670774 (UV - 110 mm) SDR 7.4
0670776 (UV - 125 mm) SDR 7.4
0670780 (UV - 160mm) SDR 7.4
0670784 (UV - 200mm) SDR 7.4
0670788 (UV - 250mm) SDR 7.4 

& Pipe also meets the chlorine resistance requirement of  CL-TD in accordance with ASTM
  F2023.
* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Socket
CSA B137.11
0111006 (16 mm)
0111008 (20 mm)
0111010 (25 mm)
0111012 (32 mm)
0111014 (40 mm)
0111016 (50 mm)
0111018 (63 mm)
0111020 (75 mm)
0111022 (90 mm)
0111024 (110 mm)
0111026 (125 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Reducer
CSA B137.11
0111109 (20/16 mm)
0111110 (25/16 mm)
0111112 (25/20 mm)
0111114 (32/20 mm)
0111116 (32/25 mm)
0111118 (40/20 mm)
0111120 (40/25 mm)
0111122 (40/32 mm)
0111124 (50/20 mm)
0111126 (50/25 mm)
0111128 (50/32 mm)
0111130 (50/40 mm)
0111131 (63/20 mm)
0111132 (63/25 mm)
0111134 (63/32 mm)
0111136 (63/40 mm)
0111138 (63/50 mm)
0111139 (75/40 mm)
0111140 (75/50 mm)
0111142 (75/63 mm)
0111143 (75/20 mm)
0111144 (75/25 mm)
0111145 (75/32 mm)
0111151 (90/50 mm)
0111152 (90/63 mm)
0111153 (90/75 mm)
0111155 (110/63 mm)
0111157 (110/75 mm)
0111159 (110/90 mm)
0111161 (125/75 mm)
0111163 (125/90 mm)
0111165 (125/110 mm)
0111176 (160/125 mm) SDR 7.4
0111174 (160/110 mm) SDR 7.4
0111175 (160/110 mm) SDR 11
0111177 (160/125 mm) SDR 11
0111184 (200/160 mm) SDR 7.4
0111185 (200/160 mm) SDR 11
0111190 (250/200 mm) SDR 7.4
0111191 (250/200 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Reducing Socket
CSA B137.11
0111238 (63/50 mm)
0111242 (75/63 mm)
0111253 (90/75 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Elbow 45°
CSA B137.11
0112506 (16 mm)
0112508 (20 mm)
0112510 (25 mm)
0112512 (32 mm)
0112514 (40 mm)
0112516 (50 mm)
0112518 (63 mm)
0112520 (75 mm)
0112522 (90 mm)
0112524 (110 mm)
0112526 (125 mm)
0112530 (160 mm) SDR 7.4
0112531 (160 mm) SDR 11
0112534 (200 mm) SDR 7.4
0112535 (200 mm) SDR 11
0112538 (250 mm) SDR 7.4
0112539 (250 mm) SDR 11
0112708 (20 mm Internal/External)
0112710 (25 mm Internal/External)
0112712 (32 mm Internal/External)
0112714 (40 mm Internal/External) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Elbow 90°
CSA B137.11
0112106 (16 mm)
0112108 (20 mm)
0112110 (25 mm)
0112112 (32 mm)
0112114 (40 mm)
0112116 (50 mm)
0112118 (63 mm)
0112120 (75 mm)
0112122 (90 mm)
0112124 (110 mm)
0112126 (125 mm)
0112130 (160 mm) SDR 7.4
0112131 (160 mm) SDR 11
0112134 (200 mm) SDR 7.4
0112135 (200 mm) SDR 11
0112138 (250 mm) SDR 7.4
0112139 (250 mm) SDR 11
0112306 (16 mm Internal/External)
0112308 (20 mm Internal/External)
0112310 (25 mm Internal/External)
0112312 (32 mm Internal/External)
0112314 (40 mm Internal/External) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Tee
CSA B137.11
0113106 (16 mm)
0113108 (20 mm)
0113110 (25 mm)
0113112 (32 mm)
0113114 (40 mm)
0113116 (50 mm)
0113118 (63 mm)
0113120 (75 mm)
0113122 (90 mm)
0113124 (110 mm)
0113126 (125 mm)
0113130 (160 mm) SDR 7.4
0113131 (160 mm) SDR 11
0113134 (200 mm) SDR 7.4
0113135 (200 mm) SDR 11
0113138 (250 mm) SDR 7.4
0113139 (250 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Reducing Tee
CSA B137.11
0113506 (20 mm x 16 mm x 16 mm)
0113508 (20 mm x 16 mm x 20 mm)
0113510 (20 mm x 20 mm x 16 mm)
0113511 (20 mm x 25 mm x 20 mm)
0113512 (25 mm x 16 mm x 16 mm)
0113514 (25 mm x 16 mm x 20 mm)
0113516 (25 mm x 16 mm x 25 mm)
0113518 (25 mm x 20 mm x 16 mm)
0113520 (25 mm x 20 mm x 20 mm)
0113522 (25 mm x 20 mm x 25 mm)
0113528 (32 mm x 16 mm x 32 mm)
0113532 (32 mm x 20 mm x 20 mm)
0113534 (32 mm x 20 mm x 32 mm)
0113538 (32 mm x 25 mm x 25 mm)
0113540 (32 mm x 25 mm x 32 mm)
0113542 (40 mm x 20 mm x 40 mm)
0113544 (40 mm x 25 mm x 40 mm)
0113546 (40 mm x 32 mm x 40 mm)
0113547 (50 mm x 20 mm x 50 mm)
0113548 (50 mm x 25 mm x 50 mm)
0113550 (50 mm x 32 mm x 50 mm)
0113551 (50 mm x 40 mm x 50 mm)
0113552 (63 mm x 20 mm x 63 mm)
0113554 (63 mm x 25 mm x 63 mm)
0113556 (63 mm x 32 mm x 63 mm)
0113558 (63 mm x 40 mm x 63 mm)
0113560 (63 mm x 50 mm x 63 mm)
0113561 (75 mm x 20 mm x 75 mm)
0113562 (75 mm x 25 mm x 75 mm)
0113564 (75 mm x 32 mm x 75 mm)
0113566 (75 mm x 40 mm x 75 mm)
0113568 (75 mm x 50 mm x 75 mm)
0113570 (75 mm x 63 mm x 75 mm)
0113576 (90 mm x 32 mm x 90 mm)
0113578 (90 mm x 40 mm x 90 mm)
0113580 (90 mm x 50 mm x 90 mm)
0113582 (90 mm x 63 mm x 90 mm)
0113584 (90 mm x 75 mm x 90 mm)
0113586 (110 mm x 63 mm x 110 mm)
0113588 (110 mm x 75 mm x 110 mm)
0113590 (110 mm x 90 mm x 110 mm)
0113592 (125 mm x 75 mm x 125 mm)
0113594 (125 mm x 90 mm x 125 mm)
0113596 (125 mm x 110 mm x 125 mm)
0113600 (160 mm x 75 mm x 160 mm) SDR 7.4
0113601 (160 mm x 75 mm x 160 mm) SDR 11
0113602 (160 mm x 90 mm x 160 mm) SDR 7.4
0113603 (160 mm x 90 mm x 160 mm) SDR 11
0113608 (200 mm x 75 mm x 200 mm) SDR 7.4
0113609 (200 mm x 75 mm x 200 mm) SDR 11
0113610 (200 mm x 90 mm x 200 mm) SDR 7.4
0113611 (200 mm x 90 mm x 200 mm) SDR 11
0113612 (200 mm x 110 mm x 200 mm) SDR 7.4
0113613 (200 mm x 110 mm x 200 mm) SDR 11
0113614 (200 mm x 125 mm x 200 mm) SDR 7.4
0113615 (200 mm x 125 mm x 200 mm) SDR 11
0113624 (250 mm x 75 mm x 250 mm) SDR 7.4
0113625 (250 mm x 75 mm x 250 mm) SDR 11
0113626 (250 mm x 90 mm x 250 mm) SDR 7.4
0113627 (250 mm x 90 mm x 250 mm) SDR 11
0113628 (250 mm x 110 mm x 250 mm) SDR 7.4
0113629 (250 mm x 110 mm x 250 mm) SDR 11
0113630 (250 mm x 125 mm x 250 mm) SDR 7.4
0113631 (250 mm x 125 mm x 250 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Cross
CSA B137.11
0113708 (20 mm)
0113710 (25 mm)
0113712 (32 mm)
0113714 (40 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® End Cap
CSA B137.11
0114106 (16 mm)
0114108 (20 mm)
0114110 (25 mm)
0114112 (32 mm)
0114114 (40 mm)
0114116 (50 mm)
0114118 (63 mm)
0114120 (75 mm)
0114122 (90 mm)
0114124 (110 mm)
0114126 (125 mm)
0114130 (160 mm) SDR 7.4
0114131 (160 mm) SDR 11
0114134 (200 mm) SDR 7.4
0114135 (200 mm) SDR 11
0114138 (250 mm) SDR 7.4
0114139 (250 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Fusion Outlet (Saddle)
CSA B137.11
0115156 (40/20 mm)
0115158 (40/25 mm)
0115160 (50/20 mm)
0115162 (50/25 mm)
0115164 (63/20 mm)
0115166 (63/25 mm)
0115168 (63/32 mm)
0115170 (75/20 mm)
0115172 (75/25 mm)
0115174 (75/32 mm)
0115175 (75/40 mm)
0115176 (90/20 mm)
0115178 (90/25 mm)
0115180 (90/32 mm)
0115181 (90/40 mm)
0115182 (110/20 mm)
0115184 (110/25 mm)
0115186 (110/32 mm)
0115188 (110/40 mm)
0115189 (110/50 mm)
0115190 (125/20 mm)
0115192 (125/25 mm)
0115194 (125/32 mm)
0115196 (125/40 mm)
0115197 (125/50 mm)
0115198 (125/63 mm)
0115206 (160/20 mm)
0115208 (160/25 mm)
0115210 (160/32 mm)
0115212 (160/40 mm)
0115214 (160/50 mm)
0115216 (160/63 mm)
0115228 (200 - 250/20 mm)
0115229 (200 - 250/25 mm)
0115230 (200 - 250/32 mm)
0115231 (200/40 mm)
0115232 (200/50 mm)
0115233 (200/63 mm)
0115251 (250/40 mm)
0115252 (250/50 mm)
0115253 (250/63 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Flange Adapter
CSA B137.11
0115512 (32 mm)
0115514 (40 mm)
0115516 (50 mm)
0115518 (63 mm)
0115520 (75 mm)
0115522 (90 mm)
0115524 (110 mm)
0115526 (125 mm - Only with Fitting)
0115527 (125 mm)
0115530 (160 mm) SDR 7.4
0115531 (160 mm) SDR 11
0115534 (200 mm) SDR 7.4
0115535 (200 mm) SDR 11
0115538 (250 mm) SDR 7.4
0115539 (250 mm) SDR 11 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Flange
CSA B137.11
0115712 (32 mm)
0115714 (40 mm)
0115716 (50 mm)
0115718 (63 mm)
0115720 (75 mm)
0115722 (90 mm)
0115724 (110 mm)
0115726 (125 mm)
0115730 (160 mm)
0115734 (200 mm)
0115738 (250 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Overbridgebow
CSA B137.11
0116106 (16 mm)
0116108 (20 mm)
0116110 (25 mm)
0116112 (32 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Electrofusion
CSA B137.11
0117208 (Socket - 20 mm)
0117210 (Socket - 25 mm)
0117212 (Socket - 32 mm)
0117214 (Socket - 40 mm)
0117216 (Socket - 50 mm)
0117218 (Socket - 63 mm)
0117220 (Socket - 75 mm)
0117222 (Socket - 90 mm)
0117224 (Socket - 110 mm)
0117226 (Socket - 125 mm)
0117230 (Socket - 160 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Back Plate Elbow
CSA B137.11
0120106 (16 mm x 1/2" F)
0120108 (20 mm x 1/2" F)
0120110 (20 mm x 3/4" F)
0120112 (25 mm x 3/4" F)
0120113 (25 mm x 1/2" F) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Cavity Wall
CSA B137.11
0120114 (Fitting - 1/2") 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Insulation
CSA B137.11
0120120 (Cleading for Wall Disk 1/2") 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Cavity Wall Disk
CSA B137.11
0120156 (16 mm x 1/2" F)
0120158 (20 mm x 1/2" F) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Transition Elbow
CSA B137.11
0120206 (16 mm x 1/2" F x 3/4" M)
0120208 (20 mm x 1/2" F x 3/4" M)
0120209 (25 mm x 1/2" F x 3/4" M)
0120210 (20 mm x 1/2" F x 3/4" M - 30 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Adapter
CSA B137.11
0120204 (20 mm x 1/2" F x 3/4" M)
0121006 (Round - 16 mm x 1/2" F)
0121008 (Round - 20 mm x 1/2" F)
0121010 (Round - 20 mm x 3/4" F)
0121011 (Round - 25 mm x 1/2" F)
0121012 (Round - 25 mm x 3/4" F)
0121013 (Round - 32 mm x 3/4" F)
0121106 (Hexagon - 16 mm x 1/2" F)
0121108 (Hexagon - 20 mm x 1/2" F)
0121110 (Hexagon - 20 mm x 3/4" F)
0121111 (Hexagon - 25 mm x 1/2" F)
0121112 (Hexagon - 25 mm x 3/4" F)
0121113 (Hexagon - 32 mm x 3/4" F)
0121114 (Hexagon - 32 mm x 1" F)
0121115 (Hexagon - 40 mm x 1" F)
0121116 (Hexagon - 40 mm x 1 1/4" F)
0121117 (Hexagon - 50 mm x 1 1/4" F)
0121118 (Hexagon - 50 mm x 1 1/2" F)
0121119 (Hexagon - 63 mm x 1 1/2" F)
0121120 (Hexagon - 63 mm x 2" F)
0121122 (Hexagon - 75 mm x 2" F)
0121206 (Round - 16 mm x 1/2" M)
0121208 (Round - 20 mm x 1/2" M)
0121210 (Round - 20 mm x 3/4" M)
0121211 (Round - 25 mm x 1/2" M)
0121212 (Round - 25 mm x 3/4" M)
0121213 (Round - 32 mm x 3/4" M)
0121306 (Hexagon - 16 mm x 1/2" M)
0121308 (Hexagon - 20 mm x 1/2" M)
0121310 (Hexagon - 20 mm x 3/4" M)
0121312 (Hexagon - 25 mm x 3/4" M)
0121314 (Hexagon - 32 mm x 1" M)
0121316 (Hexagon - 32 mm x 1 1/4" M)
0121317 (Hexagon - 40 mm x 1" M)
0121318 (Hexagon - 40 mm x 1 1/4" M)
0121319 (Hexagon - 50 mm x 1 1/4" M)
0121320 (Hexagon - 50 mm x 1 1/2" M)
0121321 (Hexagon - 63 mm x 1 1/2" M)
0121322 (Hexagon - 63 mm x 2" M)
0121323 (Hexagon - 75 mm x 2" M)
0121324 (Hexagon - 75 mm x 2 1/2" M)
0121325 (Hexagon - 90 mm x 3" M)
0121327 (Hexagon - 110 mm x 4" M) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Adapter - Round
CSA B137.11
0121258 (Self Sealing - 20 mm x 1/2" M)
0121261 (Self Sealing - 25 mm x 1/2" M)
0121262 (Self Sealing - 25 mm x 3/4" M) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Adapter - Hex
CSA B137.11
0121355 (Self Sealing - 20 mm x 1/2" M)
0121356 (Self Sealing - 16 mm x 1/2" M)
0121358 (Self Sealing - 20 mm x 1/2" M) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Transition Elbow
CSA B137.11
0123006 (16 mm x 1/2" F)
0123008 (20 mm x 3/4" F)
0123010 (20 mm x 1/2" F)
0123012 (25 mm x 3/4" F)
0123014 (25 mm x 1/2" F)
0123016 (32 mm x 3/4" F)
0123018 (32 mm x 1" F)
0123208 (20 mm External x 1/2" F)
0123504 (16 mm x 1/2" M)
0123506 (20 mm x 1/2" M)
0123508 (20 mm x 3/4" M)
0123510 (25 mm x 3/4" M)
0123512 (32 mm x 3/4" M)
0123514 (32 mm x 1" M) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Transition Tee
CSA B137.11
0125004 (16 x 1/2" F x 16 mm)
0125006 (20 x 1/2" F x 20 mm)
0125008 (20 x 3/4" F x 20 mm)
0125010 (25 x 1/2" F x 25 mm)
0125012 (25 x 3/4" F x 25 mm)
0125014 (32 x 3/4" F x 32 mm)
0125016 (32 x 1" F x 32 mm)
0125022 (50 x 1" F x 50 mm)
0125506 (20 x 1/2" M x 20 mm) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Adapter
CSA B137.11
0126608 (20 mm x 1/2" M)
0126610 (25 mm x 3/4" M)
0126612 (32 mm x 1" M)
0126614 (40 mm x 1 1/4" M)
0126616 (50 mm x 1 1/2" M)
0126618 (63 mm x 2" M)
0126638 (20 mm x 1/2" F)
0126640 (25 mm x 3/4" F)
0126642 (32 mm x 1" F)
0126644 (40 mm x 1 1/4" F)
0126646 (50 mm x 1 1/2" F)
0126648 (63 mm x 2" F) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Connecting Union
CSA B137.11
0126708 (L - 100 mm - 20 mm x Nut G 1")
0126710 (L - 100 mm - 25 mm x Nut G 1 1/4")
0126712 (L - 100 mm - 32 mm x Nut G 1 1/2")
0126714 (L - 100 mm - 40 mm x Nut G 2")
0126716 (L - 100 mm - 50 mm x Nut G 2 1/4")
0126718 (L - 100 mm - 63 mm x Nut G 2 3/4")
0126720 (L - 100 mm - 75 mm x Nut G 3 1/2")
0126722 (L - 100 mm - 90 mm x Nut G 4") 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Water Meter Union
CSA B137.11
0126808 (20 mm x Nut G 3/4")
0126810 (25 mm x Nut G 3/4")
0126812 (32 mm x Nut G 3/4") 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Transition Joint
CSA B137.11
0127010 (ISO - 20 mm x Nut G 1")
0127011 (ISO - 25 mm x Nut G 1")
0127012 (ISO - 25 mm x Nut G 1 1/4")
0127013 (ISO - 32 mm x Nut G 1 1/4")
0127014 (ISO - 32 mm x Nut G 1 1/2")
0127015 (ISO - 40 mm x Nut G 1 1/2")
0127016 (ISO - 40 mm x Nut G 2")
0127017 (ISO - 50 mm x Nut G 2")
0127018 (ISO - 50 mm x Nut G 2 1/4")
0127019 (ISO - 63 mm x Nut G 2 1/4")
0127020 (ISO - 63 mm x Nut G 2 3/4")
0127021 (ISO - 75 mm x Nut G 2 3/4")
0127022 (ISO - 75 mm x Nut G 3 1/2") 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Counterpart for
CSA B137.11
0127310 (ISO Joint - 20 mm x 1" M)
0127311 (ISO Joint - 25 mm x 1" M)
0127312 (ISO Joint - 25 mm x 1 1/4" M)
0127313 (ISO Joint - 32 mm x 1 1/4" M)
0127314 (ISO Joint - 32 mm x 1 1/2" M)
0127315 (ISO Joint - 40 mm x 1 1/2" M)
0127316 (ISO Joint - 40 mm x 2" M)
0127317 (ISO Joint - 50 mm x 2" M)
0127318 (ISO Joint - 50 mm x 2 1/4" M)
0127319 (ISO Joint - 63 mm x 2 1/4" M)
0127320 (ISO Joint - 63 mm x 2 3/4" M)
0127321 (ISO Joint - 75 mm x 2 3/4" M)
0127322 (ISO Joint - 75 mm x 3 1/2" M) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Fusion Outlet (Saddle)
CSA B137.11
0128214 (Hexagon - 40/25 mm x 1/2" F)
0128216 (Hexagon - 50/25 mm x 1/2" F)
0128218 (Hexagon - 63/25 mm x 1/2" F)
0128220 (Hexagon - 75/25 mm x 1/2" F)
0128222 (Hexagon - 90/25 mm x 1/2" F)
0128224 (Hexagon - 110/25 mm x 1/2" F)
0128226 (Hexagon - 125/25 mm x 1/2" F)
0128230 (Hexagon - 160/25 mm x 1/2" F)
0128232 (Hexagon - 200 - 250/25 mm x 1/2" F)
0128234 (Hexagon - 40/25 mm x 3/4" F)
0128236 (Hexagon - 50/25 mm x 3/4" F)
0128238 (Hexagon - 63/25 mm x 3/4" F)
0128240 (Hexagon - 75/25 mm x 3/4" F)
0128242 (Hexagon - 90/25 mm x 3/4" F)
0128244 (Hexagon - 110/25 mm x 3/4" F)
0128246 (Hexagon - 125/25 mm x 3/4" F)
0128250 (Hexagon - 160/25 mm x 3/4" F)
0128254 (Hexagon - 200 - 250/25 mm x 3/4" F)
0128260 (Hexagon - 75/32 mm x 1" F)
0128262 (Hexagon - 90/32 mm x 1" F)
0128264 (Hexagon - 110/32 mm x 1" F)
0128266 (Hexagon - 125/32 mm x 1" F)
0128270 (Hexagon - 160/32 mm x 1" F)
0128274 (Hexagon - 200 - 250/32 mm x 1" F)
0128314 (40/25 mm x 1/2" M)
0128316 (50/25 mm x 1/2" M)
0128318 (63/25 mm x 1/2" M)
0128320 (75/25 mm x 1/2" M)
0128322 (90/25 mm x 1/2" M)
0128324 (110/25 mm x 1/2" M)
0128326 (125/25 mm x 1/2" M)
0128330 (160/25 mm x 1/2" M)
0128334 (40/25 mm x 3/4" M)
0128336 (50/25 mm x 3/4" M)
0128338 (63/25 mm x 3/4" M)
0128340 (75/25 mm x 3/4" M)
0128342 (90/25 mm x 3/4" M)
0128344 (110/25 mm x 3/4" M)
0128346 (125/25 mm x 3/4" M)
0128350 (160/25 mm x 3/4" M) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® Distribut. Block
CSA B137.11
0130115 (Sanitary - 20/25 mm)
0130130 (with Insulation & Art. 30115) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings* ˘ +++ [G]
PP
Aquatherm greenpipe® 4-Port Manifold
CSA B137.11
0130602 (32 mm x 16 mm)
0130604 (32 mm x 20 mm)
0130804 (End Piece - 32 mm x 1/2" F) 

* Product may also carry the designation "Fusiotherm®".
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Back Plate Elbow
ASTM F2389
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Back Plate Elbow
CSA B137.11
920108 (20 mm x 1/2" F SS)
920110 (20 mm x 3/4" F SS)
920112 (25 mm x 3/4" F SS)
920113 (25 mm x 1/2" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Back Plate Elbow Dry Construction
ASTM F2389
920158 (20 mm x 1/2" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Back Plate Elbow Dry Construction
CSA B137.11
920158 (20 mm x 1/2" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Transition Pc w/Female Thrd Round
ASTM F2389
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Transition Pc w/Female Thrd Round
CSA B137.11
921008 (20 mm x 1/2" F SS)
921010 (20 mm x 3/4" F SS)
921011 (25 mm x 1/2" F SS)
921012 (25 mm x 3/4" F SS)
921013 (32 mm x 3/4" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Transition Pc w/Female Thread-Hex
ASTM F2389
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Transition Pc w/Female Thread-Hex
CSA B137.11
1121114 (32 mm x 1" F SS)
1121115 (40 mm x 1" F SS)
1121116 (40 mm x 1 1/4" F SS)
1121117 (50 mm x 1 1/4" F SS)
1121118 (50 mm x 1 1/2" F SS)
1121119 (63 mm x 1 1/2" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Transition Piece
ASTM F2389
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Transition Piece
CSA B137.11
921208 (20 mm x 1/2" M SS)
921210 (20 mm x 3/4" M SS)
921211 (25 mm x 1/2" M SS)
921212 (25 mm x 3/4" M SS)
921213 (32 mm x 3/4" M SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Transition Pc w/Female Thread-ISO
ASTM F2389
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Transition Pc w/Female Thread-ISO
CSA B137.11
923008 (20 mm x 3/4" F SS)
923010 (20 mm x 1/2" F SS)
923012 (25 mm x 3/4" F SS)
923014 (25 mm x 1/2" F SS)
923016 (32 mm x 3/4" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Trans Elbow w/Female Thread-NPT
ASTM F2389
1123018 (32 mm x 1" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Trans Elbow w/Female Thread-NPT
CSA B137.11
1123018 (32 mm x 1" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Transition Elbow with Male Thread
ASTM F2389
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Transition Elbow with Male Thread
CSA B137.11
923506 (20 mm x 1/2" M SS)
923508 (20 mm x 3/4" M SS)
923510 (25 mm x 3/4" M SS)
923512 (32 mm x 3/4" M SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Threaded Branch Tee - ISO
ASTM F2389
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Threaded Branch Tee - ISO
CSA B137.11
925006 (20 mm x 1/2" F x 20 mm SS)
925008 (20 mm x 3/4" F x 210 mm SS)
925010 (25 mm x 1/2" F x 25 mm SS)
925012 (25 mm x 3/4" x 25 mm SS)
925013 (32 mm x 1/2" F x 32 mm SS)
925014 (32 mm x 3/4" F x 32 mm SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Threaded Branch Tee - NPT
ASTM F2389
1125016 (32 mm x 1" F x 32 mm SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Threaded Branch Tee - NPT
CSA B137.11
1125016 (32 mm x 1" F x 32 mm SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
ASTM F2389
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm®Weld-In Saddle w/Female Thread-ISO
CSA B137.11
928214 (40/25 mm x 1/2" F SS)
928216 (50/25 mm x 1/2" F SS)
928218 (63/25 mm x 1/2" F SS)
928220 (75/25 mm x 1/2" F SS)
928222 (90/25 mm x 1/2" F SS)
928224 (110/25 mm x 1/2" F SS)
928226 (125/25 mm x 1/2" F SS)
928230 (160/25 mm x 1/2" F SS)
928232 (200 - 250/25 mm x 1/2" F SS)
928234 (40/25 mm x 3/4" F SS)
928236 (50/25 mm x 3/4" F SS)
928238 (63/25 mm x 3/4" F SS)
928240 (75/25 mm x 3/4" F SS)
928242 (90/25 mm x 3/4" F SS)
928244 (110/25 mm x 3/4" F SS)
928246 (125/25 mm x 3/4" F SS)
928250 (160/25 mm x 3/4" F SS)
928254 (200 - 250/25 mm x 3/4" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+++ [G]
PP
Fusiotherm® Weld-In Saddle w/ Female Thread
ASTM F2389
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS) 

+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Fittings+ [G]
PP
Fusiotherm® Weld-In Saddle w/ Female Thread
CSA B137.11
1128260 (75/32 mm x 1" F SS)
1128262 (90/32 mm x 1" F SS)
1128264 (110/32 mm x 1" F SS)
1128266 (125/32 mm x 1" F SS)
1128270 (160/32 mm x 1" F SS)
1128274 (200 - 250/32 mm x 1" F SS) 

+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.



 
Arrow Adhesives Company 
5457 Spalding Drive
Norcross, GA 30092 
United States 
800-678-9058 
770-448-9058


Facility : #  1 USA



Thread Compounds, Sealants and Lubricants






  

    Product Type
    For Use With
    Trade Name
  

 

  

    Lubricant+ [G]
    PW
    ARROW A-15 PIPE LUBE
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Asia Union Co., Ltd. 
3F Hyundai Coral Building
468-6 Sungnae-dong 
Gangdong-gu, Seoul 
Korea, Republic of 
82 2 482 3682


Facility : Kyonggi-do, Korea, Republic of



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings* ˘ § +++ [G]		
    
Brass C46400		

E-PEX		
    
ASTM F1807		



  


  

    

      

Elbow
    		
  


  


    3/8"

  

    1/2"

  

    1/2" x 3/4"

  

    3/4"

  


  

  


    1"

  

    1" x 1"

  

    1 1/4" x 1 1/4"

  


  

  

    

      

Female Adapter
    		
  


  


    1/2"

  

    1/2" x 3/4"

  

    3/4"

  

    1"

  


  

  

    

      

Female Sweat Elbow
    		
  


  


    1/2"

  

    1/2" x 3/4"

  


  

  

    

      

Fitting Adapter
    		
  


  


    3/8"

  

    3/8" x 1/2"

  

    1/2"

  

    3/4"

  


  

  


    1"

  


  

  

    

      

HEX Nipple (Union)
    		
  


  


    3/8"

  

    1/2"

  

    5/8"

  

    3/4"

  


  

  


    1"

  

    1 1/4"

  


  

  

    

      

Male Adapter
    		
  


  


    3/8" x 1/2"

  

    1/2"

  

    1/2" x 3/4"

  

    3/4"

  


  

  


    3/4" x 1/2"

  

    3/4" x 1"

  

    1" x 3/4"

  

    1"

  


  

  

    

      

PEX Coupling
    		
  


  


    3/8"

  

    1/2"

  

    1/2" x 3/8"

  

    3/4"

  


  

  


    3/4" x 1/2"

  

    1"

  

    1" x 3/4"

  

    1 1/4" x 1"

  


  

  


    1 1/4" x 1 1/4"

  


  

  

    

      

PEX x PB Coupling
    		
  


  


    1/2"

  

    3/4"

  


  

  

    

      

Plug
    		
  


  


    3/8"

  

    1/2"

  

    3/4"

  

    1"

  


  

  

    

      

Tees
    		
  


  


    3/8"

  

    1/2"

  

    3/4"

  

    1"

  


  

  


    1/2" x 3/8" x 3/8"

  

    3/4" x 3/4" x 1/2"

  

    3/4" x 1/2" x 3/4"

  

    3/4" x 1/2" x 1/2"

  


  

  


    1/2" x 1/2" x 3/4"

  

    1" x 1" x 3/4"

  

    1" x 3/4" x 3/4"

  

    3/4" x 3/4" x 1"

  


  

  


    1" x 1" x 1/2"

  

    1" x 3/4" x 1/2"

  

    1 1/4" x 1 1/4" x 1"

  


  

  

    

      

Tube Adapter
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4" x 1 1/4"

  


  

  


    3/8" x 1/2"

  

    3/4" x 1/2"

  

    1"

  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings* ˘ § +++ [G]		
    
Brass C46400		

E-PEX		
    
CSA B137.5		



  


  

    

      

Elbow
    		
  


  


    3/8"

  

    1/2"

  

    1/2" x 3/4"

  

    3/4"

  


  

  


    1"

  

    1" x 1"

  

    1 1/4" x 1 1/4"

  


  

  

    

      

Female Adapter
    		
  


  


    1/2"

  

    1/2" x 3/4"

  

    3/4"

  

    1"

  


  

  

    

      

Female Sweat Elbow
    		
  


  


    1/2"

  

    1/2" x 3/4"

  


  

  

    

      

Fitting Adapter
    		
  


  


    3/8"

  

    3/8" x 1/2"

  

    1/2"

  

    3/4"

  


  

  


    1"

  


  

  

    

      

HEX Nipple (Union)
    		
  


  


    3/8"

  

    1/2"

  

    5/8"

  

    3/4"

  


  

  


    1"

  

    1 1/4"

  


  

  

    

      

Male Adapter
    		
  


  


    3/8" x 1/2"

  

    1/2"

  

    1/2" x 3/4"

  

    3/4"

  


  

  


    3/4" x 1/2"

  

    3/4" x 1"

  

    1" x 3/4"

  

    1"

  


  

  

    

      

PEX Coupling
    		
  


  


    3/8"

  

    1/2"

  

    1/2" x 3/8"

  

    3/4"

  


  

  


    3/4" x 1/2"

  

    1"

  

    1" x 3/4"

  

    1 1/4" x 1"

  


  

  


    1 1/4" x 1 1/4"

  


  

  

    

      

PEX x PB Coupling
    		
  


  


    1/2"

  

    3/4"

  


  

  

    

      

Plug
    		
  


  


    3/8"

  

    1/2"

  

    3/4"

  

    1"

  


  

  

    

      

Tees
    		
  


  


    3/8"

  

    1/2"

  

    3/4"

  

    1"

  


  

  


    1/2" x 3/8" x 3/8"

  

    3/4" x 3/4" x 1/2"

  

    3/4" x 1/2" x 3/4"

  

    3/4" x 1/2" x 1/2"

  


  

  


    1/2" x 1/2" x 3/4"

  

    1" x 1" x 3/4"

  

    1" x 3/4" x 3/4"

  

    3/4" x 3/4" x 1"

  


  

  


    1" x 1" x 1/2"

  

    1" x 3/4" x 1/2"

  

    1 1/4" x 1 1/4" x 1"

  


  

  

    

      

Tube Adapter
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4" x 1 1/4"

  


  

  


    3/8" x 1/2"

  

    3/4" x 1/2"

  

    1"

  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings* +++ [G]		
    
Brass C69300		

LFBRASS Mini Manifolds		
    
ASTM F1807		



  


  

    

      

AULFMIMF-1
    		
  


  


    One 3/4" Inlet x Three 1/2" Outlets

  


  

  

    

      

AULFMIMF-2
    		
  


  


    One 3/4" Inlet x Fout 1/2" Outlets

  


  

  

    

      

AULFMIMF-3
    		
  


  


    Two 3/4" Inlets x Three 1/2" Outlets

  


  

  

    

      

AULFMIMF-4
    		
  


  


    Two 3/4" Inlets x Four 1/2" Outlets

  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Badger Heating Supply, LLC. 
581 West Highway 18
P.O. Box 263 
Montfort, WI 53569 
United States 
608-943-6170


Facility : Kansas City, MO



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe@ ^ ˘ § +++ [G]		
    
PEX 5006		

BHS		
    
ASTM F876/F877		



  


  

    
1/8" - 2"
    
  


  

  

    
	
		 
		 
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe$ ^ ˘ § +++ [G]		
    
PEX 5006		

BHS		
    
ASTM F876/F877		



  


  

    
1/8" - 2"
    
  


  

  

    
	
		 
		 
$ Product is barrier tubing.  Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe@ ^ ˘ +++ [G]		
    
PEX 5006		

BHS		
    
CSA B137.5		



  


  

    
1/8" - 2"
    
  


  

  

    
	
		 
		 
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe$ ^ ˘ +++ [G]		
    
PEX 5006		

BHS		
    
CSA B137.5		



  


  

    
1/8" - 2"
    
  


  

  

    
	
		 
		 
$ Product is barrier tubing.  Red, orange, or gray.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Barnett, Inc. 
3333 Lenox Avenue
Jacksonville, FL 32254 
United States 
904-384-6530


Facility : #  1 USA



Joining Materials






  

    Product Type
    General Material  
    For Use With
    Trade Name
    Product Standard
  


  

    Solvent Cement+ [G]
    PVC
    PW, DWV, SW
    Premier All Temperature PVC Cement
   
    ASTM D2564

  


  

  

    Solvent Cement+++ [G]
    CPVC
    PW
    Premier CPVC Orange Solvent Cement
   
    ASTM F493

  


  

  

    Solvent Cement+ [G]
    PVC
    PW, DWV, SW
    Premier Hot Stuff Low VOC PVC Cement
   
    ASTM D2564

  


  

  

    Solvent Cement[G]
    PVC
    PW, DWV, SW
    Premier Low VOC 1 Step Pipe Cement PVC Medium Clear
   
    ASTM D2564

  


  

  

    Solvent Cement+ [G]
    PVC
    PW, DWV, SW
    Premier Low VOC PVC Regular Cement Clear
   
    ASTM D2564

  


  

  

    Primer[G]
    PVC/CPVC
    PW
    Premier Low VOC PVC/CPVC Purple Primer
   
    ASTM F656

  


  

  

    Primer[G]
    PVC/CPVC
    PW, DWV, SW
    Premier Low VOC PVC/CPVC Purple or Clear Primer
   
    ASTM F656

  


  

  

    Solvent Cement+ [G]
    PVC
    PW, DWV, SW
    Premier PVC HD Clear Solvent Cement
   
    ASTM D2564

  


  

  

    Solvent Cement+ [G]
    PVC
    PW, DWV
    Premier PVC Medium Cement Clear
   
    ASTM D2564

  


  

  

    Solvent Cement+ [G]
    PVC
    PW, DWV, SW
    Premier PVC Regular Clear Solvent Cement
   
    ASTM D2564

  


  

  

    Solvent Cement+ [G]
    PVC
    PW, DWV, SW
    Premier PVC Wet & Dry
   
    ASTM D2564

  


  

  

    Solvent Cement (1,2,3)* ~ +++ [G]
    CPVC
    PW
    Premier® Yellow Low VOC 1-Step CPVC Cement
   
    CSA B137.6

  


  

  

    Solvent Cement (1,2,3)* ~ +++ [G]
    CPVC
    PW
    Premier® Yellow Low VOC 1-Step CPVC Cement
   
    ASTM F493

  


  

  

    
	
		 
		 
* This cement is yellow color.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
~ Product is authorized to bear the cNSF Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  






(1) This product was evaluated by NSF according to the requirements of NSF/ANSI Standard 61,
    Section 4.
(2) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On P-68 or P-70 Clear or Purple Primers.
(3) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.


 
Black Swan Manufacturing Co. 
4540 West Thomas Street
Chicago, IL 60651 
United States 
773-227-3700


Facility : Chicago, IL



Thread Compounds, Sealants and Lubricants






  

    Product Type
    For Use With
    Trade Name
  

 

  

    Lubricant+ [G]
    PW
    Black Swan Pipe Lube
  


  

  

    Thread Sealant+++ [G]
    PW, DWV, SW
    All Purpose Pipe Dope
  


  

  

    Thread Sealant+++ [G]
    PW, DWV, SW
    Big Blue
  


  

  

    Thread Sealant+++ [G]
    PW, DWV, SW
    Big White
  


  

  

    Thread Sealant+++ [G]
    PW, DWV, SW
    Swan Seal
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Boshart Industries Inc. 
25 Whaley Avenue
P.O. Box 310 
Milverton, ON N0K 1M0 
Canada 
519-595-4444
Visit this company's website


Facility : Milverton, Ontario, Canada



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings+ [G]		
    
NP		

SWP		
    
ASTM D2609		



  


  

    

      

90° Elbow, Insert x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

90° Male Elbow, MIP x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    3/4" x 3/4"

  


  

  

    

      

Adapters, MIP x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

Couplings, Insert x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

Tee, Insert x Insert x Insert
    		
  


  


    1 1/2" x 1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4" x 1 1/4"

  

    1" x 1" x 1"

  

    1/2" x 1/2" x 1/2"

  


  

  


    2" x 2" x 2"

  

    3/4" x 3/4" x 3/4"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ [G]		
    
PVC		

SWP		
    
ASTM D2609		



  


  

    

      

90° Elbow, Insert x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

90° Female Elbow, FPT x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1 1/4" x 3/4"

  

    1" x 1"

  


  

  


    1/2" x 1/2"

  

    3/4" x 3/4"

  


  

  

    

      

90° Male Elbow, MIP x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

90° Reducer Elbow, Insert x Insert
    		
  


  


    1 1/4" x 1"

  

    1" x 3/4"

  

    3/4" x 1/2"

  


  

  

    

      

90° Reducer Female Elbow, FPT x Insert
    		
  


  


    1 1/4" x 3/4"

  

    1" x 1 1/4"

  

    1" x 1/2"

  

    1" x 3/4"

  


  

  


    3/4" x 1/2"

  


  

  

    

      

Adapters, MIP x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3" x 3"

  

    3/4" x 3/4"

  


  

  

    

      

Couplings, Insert x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3" x 3"

  

    3/4" x 3/4"

  


  

  

    

      

Elbow, FPT x Insert
    		
  


  


    1/2" x 1/2"

  

    3/4" x 3/4"

  


  

  

    

      

Female Adapters, FPT x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

Female Tee, Insert x Insert x FPT
    		
  


  


    1 1/2" x 1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4" x 1 1/4"

  

    1" x 1" x 1"

  

    1/2" x 1/2" x 1/2"

  


  

  


    3/4" x 3/4" x 3/4"

  


  

  

    

      

Increasing Adapter, MIP x Insert
    		
  


  


    1 1/2" x 2"

  

    1 1/4" x 1 1/2"

  

    1" x 1 1/2"

  

    1" x 1 1/4"

  


  

  


    1/2" x 3/4"

  

    3/4" x 1"

  


  

  

    

      

Male Tee, Insert x Insert x MIP
    		
  


  


    1 1/2" x 1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4" x 1 1/4"

  

    1" x 1" x 1"

  

    1/2" x 1/2" x 1/2"

  


  

  


    3/4" x 3/4" x 3/4"

  


  

  

    

      

Plug, Insert
    		
  


  


    1 1/2"

  

    1 1/4"

  

    1"

  

    1/2"

  


  

  


    2"

  

    3/4"

  


  

  

    

      

Reducer Adapter, MIP x Insert
    		
  


  


    1 1/2" x 1 1/4"

  

    1 1/2" x 1"

  

    1 1/4" x 1"

  

    1 1/4" x 3/4"

  


  

  


    1" x 3/4"

  

    2" x 1 1/2"

  

    3/4" x 1/2"

  


  

  

    

      

Reducer Coupling, Insert x Insert
    		
  


  


    1 1/2" x 1 1/4"

  

    1 1/2" x 1"

  

    1 1/2" x 3/4"

  

    1 1/4" x 1"

  


  

  


    1 1/4" x 3/4"

  

    1" x 1/2"

  

    1" x 3/4"

  

    2" x 1 1/2"

  


  

  


    2" x 1 1/4"

  

    2" x 1"

  

    3/4" x 1/2"

  


  

  

    

      

Reducer Elbow, FPT x Insert
    		
  


  


    1" x 1/2"

  

    3/4" x 1/2"

  


  

  

    

      

Reducer Female Tee, Insert x Insert x FPT
    		
  


  


    1 1/2" x 1 1/2" x 3/4"

  

    1 1/4" x 1 1/4" x 1"

  

    1 1/4" x 1 1/4" x 1/2"

  

    1 1/4" x 1 1/4" x 3/4"

  


  

  


    1" x 1" x 1/2"

  

    1" x 1" x 3/4"

  

    2" x 2" x 1"

  

    2" x 2" x 3/4"

  


  

  


    3/4" x 3/4" x 1/2"

  


  

  

    

      

Reducer Tee, Insert x Insert x Insert
    		
  


  


    1 1/2" x 1 1/2" x 1 1/4"

  

    1 1/2" x 1 1/2" x 1"

  

    1 1/2" x 1 1/2" x 1/2"

  

    1 1/2" x 1 1/2" x 3/4"

  


  

  


    1 1/4" x 1 1/4" x 1"

  

    1 1/4" x 1 1/4" x 1/2"

  

    1 1/4" x 1 1/4" x 3/4"

  

    1" x 1" x 1/2"

  


  

  


    1" x 1" x 3/4"

  

    1/2" x 1/2" x 3/4"

  

    2" x 2" x 1/2"

  

    2" x 2" x 3/4"

  


  

  


    3/4" x 1/2" x 1/2"

  

    3/4" x 3/4" x 1"

  

    3/4" x 3/4" x 1/2"

  


  

  

    

      

Tee, Insert x Insert x Insert
    		
  


  


    1 1/2" x 1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4" x 1 1/4"

  

    1" x 1" x 1"

  

    1/2" x 1/2" x 1/2"

  


  

  


    2" x 2" x 2"

  

    3/4" x 3/4" x 3/4"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ [G]		
    
PP		

SWP		
    
ASTM D2609		



  


  

    

      

90° Elbows, Insert x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

90° Male Elbows, MIP x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1" x 1"

  

    1/2" x 1/2"

  

    3/4" x 3/4"

  


  

  

    

      

90° Reducer Elbows, Insert x Insert
    		
  


  


    3/4" x 1/2"

  


  

  

    

      

Adapters, MIP x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

Couplings, Insert x Insert
    		
  


  


    1 1/2" x 1 1/2"

  

    1 1/4" x 1/14"

  

    1" x 1"

  

    1/2" x 1/2"

  


  

  


    2" x 2"

  

    3/4" x 3/4"

  


  

  

    

      

Increasing Adapter, MIP x Insert
    		
  


  


    1/2" x 3/4"

  

    3/4" x 1"

  


  

  

    

      

Male Tee, Insert x Insert x MPT
    		
  


  


    1/2" x 1/2" x 1/2"

  


  

  

    

      

Plug, Insert
    		
  


  


    1"

  

    1/2"

  

    3/4"

  


  

  

    

      

Reducer Adapter, MIP x Insert
    		
  


  


    1" x 3/4"

  

    3/4" x 1/2"

  


  

  

    

      

Reducer Coupling, Insert x Insert
    		
  


  


    1 1/4" x 1"

  

    1" x 1/2"

  

    1" x 3/4"

  

    3/4" x 1/2"

  


  

  

    

      

Reducer Tee, Insert x Insert x Insert
    		
  


  


    1" x 1" x 1/2"

  

    1" x 1" x 3/4"

  

    3/4" x 3/4" x 1/2"

  


  

  

    

      

Tee, Insert x Insert x Insert
    		
  


  


    1 1/2" x 1 1/2" x 1 1/2"

  

    1 1/4" x 1 1/4" x 1 1/4"

  

    1" x 1" x 1"

  

    1/2" x 1/2" x 1 /2"

  


  

  


    2" x 2" x 2"

  

    3/4" x 3/4" x 3/4"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Boshart Industries, Inc. 
25 Whaley Avenue
P.O. Box 310 
Milverton, ON N0K 1M0 
Canada 
509-595-4444


Facility : Jiangsu, China



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Valves (PW)+ @ [G]		
    
PVC I-G1		

Boshart		
    
ASTM F1970		



  


  

    

      

Compact Ball Valves - Solvent Weld
    		
  


  


    0921S-05 1/2"

  

    0921S-07 3/4"

  

    0921S-10 1"

  

    0921S-12 1 1/4"

  


  

  


    0921S-15 1 1/2"

  

    0921S-20 2"

  


  

  

    

      

Compact Ball Valves - Threaded
    		
  


  


    0921-05 1/2"

  

    0921-07 3/4"

  

    0921-10 1"

  

    0921-12 1 1/4"

  


  

  


    0921-15 1 1/2"

  

    0921-20 2"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated at 150 psi at 73°F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Bow Industrial Corporation 
15 Vittie Street
Granby, QC J2G 6N8 
Canada 
450-372-5481
Visit this company's website


Facility : Granby, Quebec, Canada



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings§ +++ [G]		
    
CPVC 41		

Bow		
    
ASTM D2846		



  


  

    

      

45° Elbows
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

45° Street Elbows (S x Spg)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  


  

  

    

      

90° Elbows
    		
  


  


    1/2"

  

    3/4"

  

    3/4" x 1/2"

  

    1"

  


  

  


    1 1/4"

  

    1 1/2"

  

    2"

  


  

  

    

      

90° Street Elbows (S x Spg)
    		
  


  


    1/2" x 1/2"

  

    3/4" x 3/4"

  

    1"

  


  

  

    

      

Bushings
    		
  


  


    3/4" x 1/2"

  

    1" x 3/4"

  

    1" x 1/2"

  

    1 1/4" x 1/2"

  


  

  


    1 1/4" x 3/4"

  

    1 1/2" x 3/4"

  

    1 1/4" x 1"

  

    1 1/2" x 1"

  


  

  


    1 1/2" x 1 1/4"

  

    2" x 1"

  

    2" x 1 1/2"

  


  

  

    

      

Couplings
    		
  


  


    1/2"

  

    3/4"

  

    3/4" x 1/2"

  

    1"

  


  

  


    1" x 3/4"

  

    1 1/4"

  

    1 1/2"

  

    2"

  


  

  

    

      

Drop Ear Elbows
    		
  


  


    1/2"

  

    1/2" F x 1/2" F NPSM

  


  

  

    

      

End Caps
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

Male Adapters
    		
  


  


    1/2"

  

    1/2" x 3/4" (MPT x hub)

  

    3/4"

  

    1"

  


  

  


    1 1/4"

  

    1 1/2"

  

    2"

  


  

  

    

      

Manifold Tee
    		
  


  


    1" x 1" x 1/2"

  


  

  

    

      

Reducer Couplings (S x S)
    		
  


  


    3/4" x 1/2"

  

    1" x 3/4"

  


  

  

    

      

Reducing Tees
    		
  


  


    3/4" x 1/2" x 1/2"

  

    3/4" x 1/2" x 3/4"

  

    3/4" x 3/4" x 1/2"

  

    1" x 1" x 3/4"

  


  

  

    

      

Tees
    		
  


  


    1/2"

  

    1/2" x 1/2" x 3/4"

  

    3/4"

  

    3/4" x 3/4" x 1"

  


  

  


    1"

  

    1" x 1/2" x 1/2"

  

    1" x 1/2" x 3/4"

  

    1" x 1/2" x 1"

  


  

  


    1" x 3/4" x 1/2"

  

    1" x 3/4" x 3/4"

  

    1" x 3/4" x 1"

  

    1" x 1" x 1/2"

  


  

  


    1 1/4"

  

    1 1/4" x 1" x 1/2"

  

    1 1/4" x 1" x 3/4"

  

    1 1/4" x 1" x 1"

  


  

  


    1 1/4" x 1" x 1 1/4"

  

    1 1/4" x 1 1/4" x 1/2"

  

    1 1/4" x 1 1/4" x 3/4"

  

    1 1/4" x 1 1/4" x 1"

  


  

  


    1 1/4" x 1 1/4" x 1 1/2"

  

    1 1/2"

  

    1 1/2" x 1" x 1"

  

    1 1/2" x 1 1/2" x 1/2"

  


  

  


    1 1/2" x 1 1/2" x 3/4"

  

    1 1/2" x 1 1/2" x 1"

  

    2"

  

    2" x 2" x 1/2"

  


  

  


    2" x 2" x 1 1/2"

  

    2" x 2" x 3/4"

  

    2" x 2" x 1"

  


  

  

    

      

Transition Coupling
    		
  


  


    3/4" IPS x 3/4" CTS

  

    1" IPS x 1" CTS

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ § ++ [G]		
    
PPSU		

Bow		
    
ASTM F2159		



  


  

    

      

2 Wing Elbow Barb x NPSM
    		
  


  


    1/2", 3/4"

  


  

  

    

      

3 Wing Elbow Barb x NPSM
    		
  


  


    1/2", 3/4"

  


  

  

    

      

90° Barb Elbow
    		
  


  


    1/2", 3/4", 3/4" x 1/2"

  


  

  

    

      

90° Barb Elbow x MPT Elbow
    		
  


  


    1/2", 3/4"

  


  

  

    

      

Barb Tee
    		
  


  


    1/2" x 1/2" x 1/2"

  

    1/2" x 1/2" x 3/4"

  

    3/4" x 1/2" x 1/2"

  

    3/4" x 1/2" x 3/4"

  


  

  


    3/4" x 3/4" x 1/2"

  

    3/4" x 3/4" x 3/4"

  


  

  

    

      

Couplings
    		
  


  


    1/2", 3/4", 3/4" x 1/2"

  


  

  

    

      

Male Adapter PEX Barb x MPT
    		
  


  


    1/2", 3/4", 1/2" x 3/4", 3/4" x 1/2"

  


  

  

    

      

Test Plugs
    		
  


  


    1/2", 3/4"

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ § ++ [G]		
    
PPSU		

Bow		
    
ASTM F877		



  


  

    

      

2 Wing Elbow Barb x NPSM
    		
  


  


    1/2", 3/4"

  


  

  

    

      

3 Wing Elbow Barb x NPSM
    		
  


  


    1/2", 3/4"

  


  

  

    

      

90° Barb Elbow
    		
  


  


    1/2", 3/4", 3/4" x 1/2"

  


  

  

    

      

90° Barb Elbow x MPT Elbow
    		
  


  


    1/2", 3/4"

  


  

  

    

      

Barb Tee
    		
  


  


    1/2" x 1/2" x 1/2"

  

    1/2" x 1/2" x 3/4"

  

    3/4" x 1/2" x 1/2"

  

    3/4" x 1/2" x 3/4"

  


  

  


    3/4" x 3/4" x 1/2"

  

    3/4" x 3/4" x 3/4"

  


  

  

    

      

Couplings
    		
  


  


    1/2", 3/4", 3/4" x 1/2"

  


  

  

    

      

Male Adapter PEX Barb x MPT
    		
  


  


    1/2", 3/4", 1/2" x 3/4", 3/4" x 1/2"

  


  

  

    

      

Test Plugs
    		
  


  


    1/2", 3/4"

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ ++ [G]		
    
PPSU		

Bow		
    
CSA B137.5		



  


  

    

      

2 Wing Elbow Barb x NPSM
    		
  


  


    1/2", 3/4"

  


  

  

    

      

3 Wing Elbow Barb x NPSM
    		
  


  


    1/2", 3/4"

  


  

  

    

      

90° Barb Elbow
    		
  


  


    1/2", 3/4", 3/4" x 1/2"

  


  

  

    

      

90° Barb Elbow x MPT Elbow
    		
  


  


    1/2", 3/4"

  


  

  

    

      

Barb Tee
    		
  


  


    1/2" x 1/2" x 1/2"

  

    1/2" x 1/2" x 3/4"

  

    3/4" x 1/2" x 1/2"

  

    3/4" x 1/2" x 3/4"

  


  

  


    3/4" x 3/4" x 1/2"

  

    3/4" x 3/4" x 3/4"

  


  

  

    

      

Couplings
    		
  


  


    1/2", 3/4", 3/4" x 1/2"

  


  

  

    

      

Male Adapter PEX Barb x MPT
    		
  


  


    1/2", 3/4", 1/2" x 3/4", 3/4" x 1/2"

  


  

  

    

      

Test Plugs
    		
  


  


    1/2", 3/4"

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing§ +++ [G]		
    
CPVC 4120		

Bow CPVC FlowGuard Gold		
    
ASTM D2846		



  


  

    
1/2" - 2"
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing§ +++ [G]		
    
CPVC 4120		

Bow Flotemp		
    
ASTM D2846		



  


  

    
1/2" - 2"
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing˘ +++ [G]		
    
CPVC 4120		

Bow CPVC FlowGuard Gold		
    
CSA B137.6		



  


  

    
1/2" - 2"
    
  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing˘ +++ [G]		
    
CPVC 4120		

Bow Flotemp		
    
CSA B137.6		



  


  

    
1/2" - 2"
    
  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing# $ * ^ ˘ § ++ [G]		
    
PEX 5006		

Bowpex		
    
ASTM F876/F877		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
# Certified Bowpex tubing is blue, red, or white.
$ Tubing tested as a system using brass insert fittings manufactured by Bow Industrial
  Corporation.  Test assemblies were prepared in accordance with installation/assembly
  instructions titled "BOWPEX Crosslinked Polyethylene Hot & Cold Plumbing Systems
  Installation Guide", dated June 1997.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing# ˘ ++ [G]		
    
PEX		

Bowpex		
    
CSA B137.5		



  


  

    
1/4" - 2"
    
  


  

  

    
	
		 
		 
# Certified Bowpex tubing is blue, red, or white.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing% * ^ ˘ § ++ [G]		
    
PEX 5006		

Oxypex		
    
ASTM F876/F877		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
% Certified Oxypex tubing has a red outer layer.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing% ˘ ++ [G]		
    
PEX		

Oxypex		
    
CSA B137.5		



  


  

    
1/4" - 2"
    
  


  

  

    
	
		 
		 
% Certified Oxypex tubing has a red outer layer.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing§ +++ [G]		
    
CPVC 4120		

Bow Superflo CPVC		
    
ASTM D2846		



  


  

    
1/2" - 2"
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing˘ +++ [G]		
    
CPVC 4120		

Bow Superflo CPVC		
    
CSA B137.6		



  


  

    
1/2" - 2"
    
  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing& * @ ^ § ++ [G]		
    
PEX 5306/5006		

Bow Superpex		
    
ASTM F876/F877		



  


  

    
1/4" - 1 1/4"
    
  


  

  

    
	
		 
		 
& Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard and intended for a maximum 100 psi water service and a maximum working
  temperature of 180°F.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing& * @ ^ § ++ [G]		
    
PEX 5306/5006		

Bow Superpex		
    
AWWA C904		



  


  

    
1/2" - 1 1/4"
    
  


  

  

    
	
		 
		 
& Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard and intended for a maximum 100 psi water service and a maximum working
  temperature of 180°F.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing@ ˘ ++ [G]		
    
PEX		

Bow Superpex		
    
CSA B137.5		



  


  

    
1/4" - 1 1/4"
    
  


  

  

    
	
		 
		 
@ Certified Bow Superpex tubing has a blue, red, or white outer layer.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Canfit Industries Ltd. 
4 Rhinestone Drive
Toronto, ON M9C 3W7 
Canada 
416-886-7121


Facility : #  1 Canada



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings˘ § +++ [G]		
    
PPSU		

CANFIT		
    
ASTM F2159		



  


  

    

      

Coupling
    		
  


  


    1/2" x 1/2" (XPC33)

  

    3/4" x 3/4" (XPC44)

  


  

  

    

      

Elbow
    		
  


  


    1/2" x 1/2" (XPE33)

  

    3/4" x 3/4" (XPE44)

  


  

  

    

      

Tee
    		
  


  


    1/2" x 1/2" x 1/2" (XPT33)

  

    3/4" x 3/4" x 3/4" (XPT44)

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ § +++ [G]		
    
PPSU		

CANFIT		
    
CSA B137.5		



  


  

    

      

Coupling
    		
  


  


    1/2" x 1/2" (XPC33)

  

    3/4" x 3/4" (XPC44)

  


  

  

    

      

Elbow
    		
  


  


    1/2" x 1/2" (XPE33)

  

    3/4" x 3/4" (XPE44)

  


  

  

    

      

Tee
    		
  


  


    3/4" x 3/4" x 3/4" (XPT44)

  

    1/2" x 1/2" x 1/2" (XPT33)

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ § +++ [G]		
    
PPSU		

CF		
    
ASTM F2159		



  


  

    

      

Coupling
    		
  


  


    1/2" x 1/2" (XPC33)

  

    3/4" x 3/4" (XPC44)

  


  

  

    

      

Elbow
    		
  


  


    1/2" x 1/2" (XPE33)

  

    3/4" x 3/4" (XPE44)

  


  

  

    

      

Tee
    		
  


  


    1/2" x 1/2" x 1/2" (XPT33)

  

    3/4" x 3/4" x 3/4" (XPT44)

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ § +++ [G]		
    
PPSU		

CF		
    
CSA B137.5		



  


  

    

      

Coupling
    		
  


  


    1/2" x 1/2" (XPC33)

  

    3/4" x 3/4" (XPC44)

  


  

  

    

      

Elbow
    		
  


  


    1/2" x 1/2" (XPE33)

  

    3/4" x 3/4" (XPE44)

  


  

  

    

      

Tee
    		
  


  


    1/2" x 1/2" x 1/2" (XPT33)

  

    3/4" x 3/4" x 3/4" (XPT44)

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Canyon Plumbing & Heating 
3185 - 114th Avenue South East
Calgary, AB T2Z 3X2 
Canada 
403-258-1505


Facility : #  1 Canada



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX 5006		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
ASTM F876/F877		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
CSA B137.5		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX 5006		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
ASTM F876/F877		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
CSA B137.5		



  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX 5006		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
ASTM F876/F877		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
CSA B137.5		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX 5006		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
ASTM F876/F877		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
CSA B137.5		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
CSA B137.5		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing! $ ^ ~ ˘ Ł § +++ [G]		
    
PEX 5006		

Canyon Heating & Plumbing OXY-BARRIER-PEX		
    
ASTM F876/F877		



  


  

    
1/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
! Orange.
$ Crosslinked polyethylene plastic hot and cold water distribution system and/or hydronic
  radiant heating system made in accordance with the current version of the ASTM F877
  standard intended for a maximum 100 psi water service and a maximum working temperature
  of 180°F.  System components consist of tubing and/or fittings.  To be installed in
  accordance with manufacturer’s instructions and the latest edition of the Uniform
  Plumbing Code™.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
~ Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
Ł This product is barrier tubing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Centennial Plastics, Inc. 
1830 Centennial Avenue
P.O. Box 329 
Hastings, NE 68901 
United States 
402-462-2227
Visit this company's website


Facility : Hastings, NE



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenCore HDPE		
    
ASTM D2239		



  


  

    
1/2" SIDR 11.5
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenCore HDPE		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
3/4" - 2" SIDR 11.5
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenCore HDPE		
    
ASTM D2239		



  


  

    
1" SIDR 19
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenFlo HDPE		
    
ASTM D2239		



  


  

    
1/2" SIDR 7
    
  


  

  

    
1/2" SIDR 9
    
  


  

  

    
1/2" SIDR 11.5
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenFlo HDPE		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenFlo HDPE		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 11.5
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
1" - 2" SIDR 19
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PE 2406/PE 2708		

CenFlo MDPE		
    
ASTM D2239		



  


  

    
1/2" SIDR 11.5
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** These products also meet the requirements for PE 2406 per ASTM D3350-02.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PE 2406/PE 2708		

CenFlo MDPE		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 11.5
    
  


  

  

    
3/4" - 1 1/4" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** These products also meet the requirements for PE 2406 per ASTM D3350-02.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenCore HDPE CTS		
    
ASTM D2737		



  


  

    
1/2" SDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenCore HDPE CTS		
    
ASTM D2737		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenFlo HDPE CTS		
    
ASTM D2737		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenFuse		
    
ASTM D3035		



  


  

    
3/4" - 6" SDR 7
    
  


  

  

    
3/4" - 6" SDR 9
    
  


  

  

    
3/4" - 6" SDR 11
    
  


  

  

    
3/4" - 6" SDR 13.5
    
  


  

  

    
3/4" - 6" SDR 15.5
    
  


  

  

    
3/4" - 6" SDR 17
    
  


  

  

    
1" - 6" SDR 21
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 4710		

CenFuse		
    
ASTM D3035		



  


  

    
3/4" - 6" SDR 7
    
  


  

  

    
3/4" - 6" SDR 9
    
  


  

  

    
3/4" - 6" SDR 11
    
  


  

  

    
3/4" - 6" SDR 13.5
    
  


  

  

    
3/4" - 6" SDR 15.5
    
  


  

  

    
3/4" - 6" SDR 17
    
  


  

  

    
1" - 6" SDR 21
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

Pro Turf Blue HDPE		
    
ASTM D2239		



  


  

    
3/4" - 1 1/4" SIDR 15
    
  


  

  

    
1" - 1 1/4" SIDR 19
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

Pro Turf Green HDPE		
    
ASTM D2239		



  


  

    
3/4" - 1 1/4" SIDR 15
    
  


  

  

    
3/4" - 1 1/4" SIDR 19
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PE 2406/PE 2708		

Pro Turf Green MDPE		
    
ASTM D2239		



  


  

    
3/4" - 1 1/4" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** These products also meet the requirements for PE 2406 per ASTM D3350-02.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3408/PE 3608		

CPL Potable Water		
    
ASTM D2239		



  


  

    
1/2" SIDR 9
    
  


  

  

    
1/2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CPL Potable Water		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 9
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CPL Potable Water		
    
AWWA C901		



  


  

    
1/2" SIDR 7
    
  


  

  

    
1/2" SIDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CPL Potable Water		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenCore HDPE		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
3/4" - 2" SIDR 11.5
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenFlo HDPE		
    
AWWA C901		



  


  

    
1/2" SIDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenFlo HDPE		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenFlo HDPE		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 11.5
    
  


  

  

    
2" SIDR 15
    
  


  

  

    
2" SIDR 19
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenCore HDPE CTS		
    
AWWA C901		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PE 3408/PE 3608		

CenFlo HDPE CTS		
    
AWWA C901		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PE 3408/PE 3608		

CenFuse		
    
AWWA C901		



  


  

    
3/4" - 3" SDR 9
    
  


  

  

    
3/4" - 3" SDR 11
    
  


  

  

    
3/4" - 3" SDR 13.5
    
  


  

  

    
2" - 3" SDR 17
    
  


  

  

    
2" - 3" SDR 21
    
  


  

  

    
	
		 
		 
* These products also meet the requirements for PE 3408 per ASTM D3350-02a.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 4710		

CenFuse		
    
AWWA C901		



  


  

    
3/4" - 3" SDR 9
    
  


  

  

    
3/4" - 3" SDR 11
    
  


  

  

    
3/4" - 3" SDR 13.5
    
  


  

  

    
2" - 3" SDR 17
    
  


  

  

    
2" - 3" SDR 21
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Central Boiler, Inc. 
20502 160th Street
Greenbush, MN 56726 
United States 
218-782-2575


Facility : Kansas City, MO



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe@ ^ ˘ § [G]		
    
PEX 5006		

CENTRAL PEX		
    
ASTM F876/F877		



  


  

    
1/8" - 2"
    
  


  

  

    
	
		 
		 
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe@ ^ ˘ [G]		
    
PEX 5006		

CENTRAL PEX		
    
CSA B137.5		



  


  

    
1/8" - 2"
    
  


  

  

    
	
		 
		 
@ Product available in red, white, blue or natural.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
CertainTeed Corporation Pipe & Foundations Group 
750 East Swedesford Road
Valley Forge, PA 19482 
United States 
610-341-6637
Visit this company's website


Facility : #  1 McPherson, KS



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

CertainTeed		
    
ASTM D1785		



  


  

    
1/2" - 12" Sch 40
    
  


  

  

    
1/2" - 12" Sch 80
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

CertainTeed		
    
ASTM D2241		



  


  

    
1/2" - 6" SDR 13.5
    
  


  

  

    
1 1/2" - 12" SDR 17
    
  


  

  

    
3/4" - 12" SDR 21
    
  


  

  

    
1" - 18" SDR 26
    
  


  

  

    
1 1/4" - 18" SDR 32.5
    
  


  

  

    
3" - 12" SDR 41
    
  


  

  

    
6" - 12" SDR 51
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

CertainTeed Threaded		
    
ASTM D1785		



  


  

    
1" - 2" Sch 80
    
  


  

  

    
1" - 2" Sch 120
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

Certa Lok™ C900/RJ™		
    
AWWA C900		



  


  


    4" - 12"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PVC 1120		

Certa Lok™ Yelomine™		
    
ASTM D1785		



  


  

    
2" - 6" Sch 80
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PVC 1120		

Certa Lok™ Yelomine™		
    
ASTM D2241		



  


  

    
2" - 12" SDR 17
    
  


  

  

    
4" - 16" SDR 21
    
  


  

  

    
6" - 16" SDR 26
    
  


  

  

    
6" - 12" SDR 32.5
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ [G]		
    
PVC 1120		

Certa-Lok™ Yelomine		
    
ASTM D3139		



  


  

    
2" - 16"
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

Certa Lok™ Yelomine-IB		
    
ASTM D2241		



  


  

    
4" - 6" SDR 17
    
  


  

  

    
4" - 8" SDR 21
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

KWIK-SET®		
    
ASTM D1785		



  


  

    
1" - 2" Sch 80
    
  


  

  

    
1" - 2" Sch 120
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing** [1] [G]		
    
PVC 1120 IC-0		

Certa-Lok™ IB Well Casing		
    
ASTM F480		



  


  

    
4" - 4 1/2" Sch 40
    
  


  

  

    
4 1/2" SDR 17
    
  


  

  

    
4 1/2" SDR 26
    
  


  

  

    
	
		 
		 
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing** [1] [G]		
    
PVC 1120 IC-1		

Certa-Lok™ IB Well Casing		
    
ATM F480		



  


  

    
5" - 8" SDR 17
    
  


  

  

    
5" - 6 1/4" SDR 21
    
  


  

  

    
5" SDR 26
    
  


  

  

    
6 1/4" SDR 27.6
    
  


  

  

    
	
		 
		 
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing** [1] [G]		
    
PVC 1120 IC-1		

Certa-Lok™ Well Casing		
    
ASTM F480		



  


  

    
16" Sch 40
    
  


  

  

    
10" - 16" SDR 17
    
  


  

  

    
16" SDR 21
    
  


  

  

    
16" SDR 26
    
  


  

  

    
	
		 
		 
** Sockets and gasketed bell-ends are not tested or Certified by NSF International for this
   production facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing[1] [G]		
    
PVC 1120 IC-0		

Sure-Fit™		
    
ASTM F480		



  


  

    
2" - 4 1/2" Sch 40
    
  


  

  

    
4 1/2" SDR 17
    
  


  

  

    
4" SDR 21
    
  


  

  

    
2" - 4 1/2" SDR 26
    
  


  

  

    
4" SDR 32.5
    
  


  

  

    
	
		 
		 
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing[1] [G]		
    
PVC 1120 IC-1		

Sure-Fit™		
    
ASTM F480		



  


  

    
5" - 16" Sch 40
    
  


  

  

    
6" - 8" Sch 80
    
  


  

  

    
5" - 6 1/4" SDR 17
    
  


  

  

    
5" - 12" SDR 21
    
  


  

  

    
5" - 16" SDR 26
    
  


  

  

    
6 1/4" SDR 27.6
    
  


  

  

    
5" SDR 32.5
    
  


  

  

    
	
		 
		 
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Lodi, CA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

CertainTeed Threaded		
    
ASTM D1785		



  


  

    
1" - 2" Sch 80
    
  


  

  

    
1" - 2" Sch 120
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
   facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

KWIK-SET®		
    
ASTM D1785		



  


  

    
1" - 2" Sch 80
    
  


  

  

    
1" - 2" Sch 120
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
   facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PVC 1120		

Certa-Lok™ Yelomine™		
    
ASTM D1785		



  


  

    
2" - 6" Sch 80
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PVC 1120		

Certa-Lok™ Yelomine™		
    
ASTM D2241		



  


  

    
2" - 12" SDR 17
    
  


  

  

    
4" - 12" SDR 21
    
  


  

  

    
6" - 12" SDR 26
    
  


  

  

    
6" - 12" SDR 32.5
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ** [G]		
    
PVC 1120		

Certa Lok™ Yelomine-IB		
    
ASTM D2241		



  


  

    
4" - 6" SDR 17
    
  


  

  

    
4" - 8" SDR 21
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
   facility.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing** [1] [G]		
    
PVC 1120 IC-0		

Certa-Lok™ IB Well Casing		
    
ASTM F480		



  


  

    
4" - 4 1/2" Sch 40
    
  


  

  

    
4 1/2" SDR 17
    
  


  

  

    
4 1/2" SDR 26
    
  


  

  

    
	
		 
		 
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
   facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing** [1] [G]		
    
PVC 1120 IC-1		

Certa-Lok™ IB Well Casing		
    
ASTM F480		



  


  

    
5" - 8" SDR 17
    
  


  

  

    
5" - 6 1/4" SDR 21
    
  


  

  

    
5" SDR 26
    
  


  

  

    
6 1/4" SDR 27.6
    
  


  

  

    
	
		 
		 
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
   facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing** [1] [G]		
    
PVC 1120 IC-0		

Certa-Lok™ Well Casing		
    
ASTM F480		



  


  

    
16" Sch 40
    
  


  

  

    
10" - 16" SDR 17
    
  


  

  

    
16" SDR 21
    
  


  

  

    
16" SDR 26
    
  


  

  

    
	
		 
		 
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
   facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing** [1] [G]		
    
PVC 1120 IC-1		

Certa-Lok™ Well Casing		
    
ASTM F480		



  


  

    
10" - 16" SDR 17
    
  


  

  

    
16" SDR 21
    
  


  

  

    
16" SDR 26
    
  


  

  

    
16" Sch 40
    
  


  

  

    
	
		 
		 
** Sockets and gasketed bell ends are not tested or Listed by NSF for this production
   facility.
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing[1] [G]		
    
PVC 1120 IC-0		

Sure-Fit™		
    
ASTM F480		



  


  

    
2" - 4 1/2" Sch 40
    
  


  

  

    
4 1/2" SDR 17
    
  


  

  

    
5" - 6 1/4" SDR 17
    
  


  

  

    
4" SDR 21
    
  


  

  

    
2" - 4 1/2" SDR 26
    
  


  

  

    
4" SDR 32.5
    
  


  

  

    
	
		 
		 
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing[1] [G]		
    
PVC 1120 IC-1		

Sure-Fit™		
    
ASTM F480		



  


  

    
5" - 16" Sch 40
    
  


  

  

    
6" - 8" Sch 80
    
  


  

  

    
5" - 6 1/4" SDR 17
    
  


  

  

    
5" - 12" SDR 21
    
  


  

  

    
5" - 16" SDR 26
    
  


  

  

    
6 1/4" SDR 27.6
    
  


  

  

    
	
		 
		 
[1] Certa-Lok™ Well Casing and Sure-Fit™ Well Casing have been specifically evaluated for
    well casing applications and have not been evaluated for the effects of field slotting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Charlotte Pipe & Foundry Company 
Plastics Division
4210 Old Charlotte Highway 
P.O. Box 1339 
Monroe, NC 28111-1339 
United States 
704-291-3218
Visit this company's website


Facility : #  1 USA



Joining Materials






  

    Product Type
    General Material  
    For Use With
    Trade Name
    Product Standard
  


  

    Solvent Cement (1,2,3)+++ [G]
    CPVC
    PW, DWV, SW
    ChemDrain® One-Step CPVC Solvent Cement
   
    ASTM F493

  


  

  

    Solvent Cement (1,2,3)# [G]
    CPVC
    CW
    ChemDrain® One-Step CPVC Solvent Cement
   
    ASTM F2618

  


  

  

    
	
		 
		 
# Product has been Certified as part of the Charlotte Pipe ChemDrain System to ASTM F2618.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  






(1) This product was evaluated by NSF according to the requirements of NSF/ANSI Standard 61,
    Section 4.
(2) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On® P-68®, P-70® Clear or Purple, or P-72 Clear Primers.
(3) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.



Facility : Huntsville, AL



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Drop Ear Elbows§ +++ [G]		
    
CPVC x Brass		

CPF		
    
ASTM D2846		



  


  

    

      

CTS x Brass 2302L (Soc x FIPT)
    		
  


  


    1/2"

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe§ +++ [G]		
    
CPVC 4120		

Charlotte Pipe®*		
    
ASTM D2846		



  


  

    
1/4" - 2" SDR 11
    
  


  

  

    
	
		 
		 
* These pipe products may also be represented by the trade names: Charlotte Pipe®,
  Flowguard Gold® or Charlotte Pipe®  TrueFit®System.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings, Transition§ +++ [G]		
    
CPVC 41 x Brass		

CPF**		
    
ASTM D2846		



  


  

    

      

CTS 2115L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    1/2"

  


  

  

    

      

CTS 2114L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    1/2"

  


  

  

    

      

CTS 2104L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    1/2"

  


  

  

    

      

CTS 2105L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    1/2"

  


  

  

    

      

CTS 2104L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    3/4"

  


  

  

    

      

CTS 2114L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    3/4"

  


  

  

    

      

CTS 2105L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    3/4"

  

    1"

  


  

  

    

      

CTS 2104L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    1"

  


  

  

    

      

CTS 2115L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    3/4"

  


  

  

    

      

CTS 2114L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    1"

  

    1 1/4"

  


  

  

    

      

CTS 2115L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    1"

  


  

  

    

      

CTS 2104L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    1 1/4"

  


  

  

    

      

CTS 2105L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    1 1/4"

  


  

  

    

      

CTS 2104L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    1 1/2"

  


  

  

    

      

CTS 2115L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    1 1/4"

  


  

  

    

      

CTS 2105L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    1 1/2"

  


  

  

    

      

CTS 2114L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    1 1/2"

  


  

  

    

      

CTS 2115L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    1 1/2"

  


  

  

    

      

CTS 2104L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    2"

  


  

  

    

      

CTS 2105L, Female Adapter, Brass Threads, Low Lead
    		
  


  


    2"

  


  

  

    

      

CTS 2114L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    2"

  


  

  

    

      

CTS 2115L, Male Adapter, Brass Threads, Low Lead
    		
  


  


    2"

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** These fitting products may also be represented by the trade names: CP&F, Charlotte,
   Charlotte Pipe, and Charlotte Pipe and Foundry.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry, CP&F, or Charlotte		
    
ASTM D2466		



  


  

    

      

PVC 2109 Male Adapter (MPT x S) (436-xxx)
    		
  


  


    1/2"

  


  

  

    

      

PVC 2116 Cap (Hub) (447-xxx)
    		
  


  


    1/2"

  


  

  

    

      

PVC 2112 Reducing Bushing (MPT x FPT) (439-xxx)
    		
  


  


    3/4" x 1/2"

  


  

  

    

      

PVC 2103 Riser Extension (MPT x FPT) (439-xxx
    		
  


  


    1/2" x 1/2"

  


  

  

    

      

PVC 2102 Coupling (FPT x FPT) (430-xxx)
    		
  


  


    1/2"

  


  

  

    

      

PVC 2112 Reducing Bushing (MPT x FPT) (439-xxx)
    		
  


  


    1" x 3/4"

  


  

  

    

      

PVC 2102 Coupling (FPT x FPT) (430-xxx)
    		
  


  


    3/4"

  


  

  

    

      

PVC 2116 Cap (Hub) (447-xxx)
    		
  


  


    3/4"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Wildwood, FL



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D1785		



  


  

    
1/8" - 8" Sch 40
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLFL in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D2241		



  


  

    
1" - 6" SDR 26
    
  


  

  

    
1/2" SDR 13.5
    
  


  

  

    
3/4" - 6" SDR 21
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLFL in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe§ +++ [G]		
    
CPVC 4120		

Charlotte Pipe FL® Flowguard Gold®**		
    
ASTM D2846		



  


  

    
1 1/2", 2" SDR 11
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** These pipe products may also be represented by the trade names: Charlotte Pipe FL® CPVC
   CTS™, Charlotte Pipe FL®, Charlotte Pipe FL® TrueFit® System, and Charlotte FL TrueFit®
   CPVC CTS Pipe™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing§ [G]		
    
PVC 1120 IC-0		

Charlotte Pipe® TrueFit® System***		
    
ASTM F480		



  


  

    
2" - 8" Sch 40
    
  


  

  

    
4", 6" SDR 26
    
  


  

  

    
4", 6" SDR 21
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLFL in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Monroe, NC



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe§ +++ [G]		
    
CPVC 4120		

Charlotte Pipe Corzan®**		
    
ASTM F441		



  


  

    
1/4" - 12" Sch 80
    
  


  

  

    
1/4" - 12" Sch 40
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** These pipe prodcuts may also be represented by the trade names: Charlotte Pipe CPVP 4120
   and Charlotte Pipe TrueFit® System.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D1785		



  


  

    
1/8" - 18" Sch 40
    
  


  

  

    
1/8" - 18" Sch 80
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLNC in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D2241		



  


  

    
1" - 18" SDR 26
    
  


  

  

    
1/2" SDR 13.5
    
  


  

  

    
3/4" - 18" SDR 21
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLNC in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe§ +++ [G]		
    
CPVC 4120		

Charlotte Pipe® Flowguard Gold® CPVC****		
    
ASTM D2846		



  


  

    
1 1/2", 2" SDR 11
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
**** These pipe products may also be represented by the trade names: Charlotte Pipe® CPVC
     CTS™, Charlotte Pipe®, Charlotte Pipe® TrueFit® System, and Charlotte TrueFit® CPVC CTS
     Pipe™.


    		
  


  

    
Fittings+++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry Corzan®*****		
    
ASTM F439		



  


  

    

      

45° Elbow (FPT x FPT)
    		
  


  


    1/2" - 4" (819-xxxc)

  


  

  

    

      

45° Elbow (S x S)
    		
  


  


    1/2" - 8" (817-xxxc)

  


  

  

    

      

90° Elbow (FPT x FPT)
    		
  


  


    1/2" - 4" (808-xxxc)

  


  

  

    

      

90° Elbow (S x FPT)
    		
  


  


    1/2" - 2" (807-xxxc)

  


  

  

    

      

90° Elbow (S x S)
    		
  


  


    1/2" - 8" (806-xxxc)

  


  

  

    

      

Cap (FPT)
    		
  


  


    1/2" - 4" (848-xxxc)

  


  

  

    

      

Cap (Socket)
    		
  


  


    1/2" - 8" (847-xxxc)

  


  

  

    

      

Coupling (FPT x FPT)
    		
  


  


    1/2" - 4" (830-xxxc)

  


  

  

    

      

Coupling (S x S)
    		
  


  


    1/2" - 8" (829-xxxc)

  


  

  

    

      

Female Adapter (S x FPT)
    		
  


  


    1/2" - 4" (835-xxxc)

  


  

  

    

      

Male Adapter (S x MPT)
    		
  


  


    1/2" - 6" (836-xxxc)

  


  

  

    

      

Plug (MPT)
    		
  


  


    1/2" - 4" (850-xxxc)

  


  

  

    

      

Reducer Bushing (MPT x FPT)
    		
  


  


    3/4" x 1/2" - 4" x 3" (839-xxxc)

  


  

  

    

      

Reducer Bushing (Spg x FPT)
    		
  


  


    3/4" x 1/2" - 6" x 4" (838-xxxc)

  


  

  

    

      

Reducer Bushing (Spg x S)
    		
  


  


    3/4" x 1/2" - 8" x 6" (837-xxxc)

  


  

  

    

      

Reducer Coupling (S x S)
    		
  


  


    3/4" x 1/2" - 8" x 6" (829-xxxc)

  


  

  

    

      

Reducing Tee (S x S x S)
    		
  


  


    3/4" x 3/4" x 1/2" - 8" x 8" x 6" (801-xxxc)

  


  

  

    

      

Tee (FPT x FPT x FPT)
    		
  


  


    1/2" - 4" (805-xxxc)

  


  

  

    

      

Tee (S x S x FPT)
    		
  


  


    1/2" - 1" (802-xxxc)

  


  

  

    

      

Tee (S x S x S)
    		
  


  


    1/2" - 8" (801-xxxc)

  


  

  

    

      

Wye (Socket)
    		
  


  


    1 1/2" - 6" (875-xxxc)

  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
***** These fittings products may also be represented by the trade name: Charlotte Pipe
      TrueFit® System.


    		
  


  

    
Fittings+ [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry, CP&F, or Charlotte		
    
ASTM D2466		



  


  

    

      

PVC 2100 Coupling (Hub x Hub)(429-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  

    10"

  


  

  


    12"

  

    3/4" x 1/2"

  

    1" x 3/4"

  


  

  

    

      

PVC 2101 Female Adapter (Hub x FPT)(435-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 2101 Female Adapter Reducing(HubxFPT)(435-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 3/4"

  


  

  

    

      

PVC 2102 Coupling (FPT x FPT)(430-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  


  

  

    

      

PVC 2103 Riser Extension (MPT x FPT)(439-xxx)
    		
  


  


    1/2" x 1/2"

  


  

  

    

      

PVC 2107 Reducing Bushing (SPG x S)(437-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 1/2"

  

    1" x 3/4"

  

    1 1/4" x 1/2"

  


  

  


    1 1/4" x 3/4"

  

    1 1/4" x 1"

  

    1 1/2" x 1/2"

  

    1 1/2" x 3/4"

  


  

  


    1 1/2" x 1"

  

    1 1/2" x 1 1/4"

  

    2" x 3/4"

  

    2" x 1"

  


  

  


    2" x 1 1/4"

  

    2" x 1 1/2"

  

    2 1/2" x 2"

  

    3" x 2"

  


  

  


    3" x 1 1/2"

  

     4" x 2"

  

    4" x 3"

  

    6" x 4"

  


  

  


    8" x 4"

  

    8" x 6"

  


  

  

    

      

PVC 2108 Reducing Bushing (SPG x FPT)(438-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 1/2"

  

    1" x 3/4"

  

    1 1/4" x 1/2"

  


  

  


    1 1/4" x 3/4"

  

    1 1/4" x 1"

  

    1 1/2" x 1/2"

  

    1 1/2" x 3/4"

  


  

  


    1 1/2" x 1"

  

    1 1/2" x 1 1/4"

  

    2" x 1/2"

  

    2" x 3/4"

  


  

  


    2" x 1"

  

    2" x 1 1/2"

  

    3" x 2"

  

    3" x 2 1/2"

  


  

  


    4" x 2"

  

    4" x 3"

  

    6" x 4"

  


  

  

    

      

PVC 2109 Male Adapter (MPT x S)(436-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  


  

  

    

      

PVC 2110 Male Adapter Reducing(MPT x Hub)(436-xxx)
    		
  


  


    1/2" x 3/4"

  

    3/4" x 1/2"

  

    3/4" x 1"

  

    1" x 3/4"

  


  

  


    1" x 1 1/4"

  

    1 1/4" x 1"

  

    1 1/4" x 1 1/2"

  

    1 1/2" x 1 1/4"

  


  

  


    1 1/2" x 2"

  

    2" x 1 1/2"

  


  

  

    

      

PVC 2112 Reducing Bushing (MPT x FPT)(439-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 3/4"

  

    1 1/4" x 3/4"

  

    1 1/4" x 1"

  


  

  


    1 1/2" x 3/4"

  

    1 1/2" x 1"

  

    1 1/2" x 1 1/4"

  

    2" x 1 1/2"

  


  

  

    

      

PVC 2113 Plug (MPT)(450-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2116 Cap (Hub)(447-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 2117 Cap (FPT)(448-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2118 Plug (SPG)(449-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2300 90° Elbow (Hub x Hub)(406-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 2300 90° Reducing Elbow (Hub x Hub)(406-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 1/2"

  

    1" x 3/4"

  

    1 1/4" x 1"

  


  

  


    1 1/2" x 1"

  


  

  

    

      

PVC 2301 90° Elbow (Hub x FPT)(407-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2301 90° Reducing Elbow (Hub x FPT)(407-xxx)
    		
  


  


    3/4" x 1/2"

  

    1/2" x 3/4"

  

    1" x 1/2"

  

    1" x 3/4"

  


  

  

    

      

PVC 2302 90° Elbow (FPT x FPT)(408-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  


  

  

    

      

PVC 2304 90° Elbow (SPG x Hub)(409-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2306 90° Elbow (MPT x Hub)(410-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2307 90° Elbow (MPT x FPT)(412-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  


  

  

    

      

PVC 2309 45° Elbow (Hub x Hub)(417-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 2400 Reducing Tee (All Hub)(401-xxx)
    		
  


  


    1/2" x 1/2" x 3/4"

  

    3/4" x 3/4" x 1"

  

    1" x 1" x 1/2"

  

    1" x 1" x 3/4"

  


  

  


    1 1/4" x 1 1/4" x 1/2"

  

    1 1/4" x 1 1/4" x 3/4"

  

    1 1/2" x 1 1/2" x 1/2"

  

    1 1/2" x 1 1/2" x 3/4"

  


  

  


    1 1/2" x 1 1/2" x 1"

  

    2" x 2" x 3/4"

  

    2" x 2" x 1"

  

    2" x 2" x 1 1/4"

  


  

  


    2" x 2" x 1 1/2"

  

    3" x 3" x 2"

  

    4" x 4" x 2"

  

    4" x 4" x 3"

  


  

  


    6" x 6" x 4"

  


  

  

    

      

PVC 2400 Tee (All Hub)(401-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 2401 Reducing Tee (Hub x Hub x SPG)(402-xxx)
    		
  


  


    3/4" x 3/4" x 1/2"

  

    1" x 1" x 1/2"

  

    1" x 1" x 3/4"

  

    1 1/4" x 1 1/4" x 1/2"

  


  

  


    1 1/4" x 1 1/4" x 3/4"

  

    1 1/2" x 1 1/2" x 1/2"

  

    1 1/2" x 1 1/2" x 3/4"

  

    1 1/2" x 1 1/2" x 1"

  


  

  


    2" x 2" x 1"

  

    2" x 2" x 1 1/2"

  


  

  

    

      

PVC 2401 Tee (Hub xHub xFPT)(402-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2410 Cross (All Hub)(420-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 2520 90° Elbow-S/OUT(Hub x Hub x FPT)(414-xxx)
    		
  


  


    1/2"

  

    3/4" x 3/4" x 1/2"

  

    1" x 1" x 1/2"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry, CP&F, or Charlotte		
    
ASTM D2467		



  


  

    

      

PVC 8100 Coupling (Hub x Hub)(829-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 8100 Reducer Coupling (Hub x Hub)(829-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 1/2"

  

    1" x 3/4"

  

    1 1/4" x 1"

  


  

  


    1 1/2" x 1"

  

    1 1/2" x 1 1/4"

  

    2" x 1"

  

    2" x 1 1/2"

  


  

  


    3" x 2"

  

    4" x 2"

  

    4" x 3"

  

    6" x 4"

  


  

  


    8" x 6"

  


  

  

    

      

PVC 8101 Female Adapter (Hub x FPT)(835-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8102 Coupling (FPT x FPT)(830-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8107 Reducer Bushing (SPG x Hub)(837-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 1/2"

  

    1" x 3/4"

  

    1 1/4" x 1/2"

  


  

  


    1 1/4" x 3/4"

  

    1 1/4" x 1"

  

    1 1/2" x 1/2"

  

    1 1/2" x 3/4"

  


  

  


    1 1/2" x 1"

  

    1 1/2" x 1 1/4"

  

    2" x 1/2"

  

    2" x 3/4"

  


  

  


    2" x 1"

  

    2" x 1 1/4"

  

    2" x 1 1/2"

  

    2 1/2" x 1"

  


  

  


    2 1/2" x 1 1/4"

  

    2 1/2" x 1 1/2"

  

    2 1/2 x 2"

  

    3" x 1"

  


  

  


    3" x 1 1/4"

  

    3" x 1 1/2"

  

    3" x 2"

  

    3" x 2 1/2"

  


  

  


    4" x 2"

  

    4" x 3"

  

    6" x 3"

  

    6" x 4"

  


  

  


    8" x 6"

  


  

  

    

      

PVC 8108 Reducer Bushing (Spg x FPT)(838-xxx)
    		
  


  


    3/4" x 1/2"

  

    1" x 1/2"

  

    1" x 3/4"

  

    1 1/4" x 3/4"

  


  

  


    1 1/4" x 1"

  

    1 1/2" x 1/2"

  

    1 1/2" x 3/4"

  

    1 1/2" x 1"

  


  

  


    1 1/2" x 1 1/4"

  

    2" x 1/2"

  

    2" x 3/4"

  

    2" x 1"

  


  

  


    2" x 1 1/4"

  

    2" x 1 1/2"

  

    2 1/2" x 1 1/2"

  

    2 1/2 x 2"

  


  

  


    3" x 2"

  

    3" x 2 1/2"

  

    4" x 2"

  

    4" x 3"

  


  

  


    6" x 4"

  


  

  

    

      

PVC 8109 Male Adapter (Hub x MPT)(836-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8113 Plug (MPT)(850-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8116 Cap (Socket)(847-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 8117 Cap (FPT)(848-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8200 Reducer Bushing (MPT x FPT)(839-xxx)
    		
  


  


    3/4"x 1/2"

  

    1"x 1/2"

  

    1"x 3/4"

  

    1 1/4"x 3/4"

  


  

  


    1 1/4"x 1"

  

    1 1/2"x 1/2"

  

    1 1/2"x 3/4"

  

    1 1/2"x 1"

  


  

  


    1 1/2"x 1 1/4"

  

    2"x 1/2"

  

    2"x 3/4"

  

    2"x 1"

  


  

  


    2"x 1 1/4"

  

    2"x 1 1/2"

  

    2 1/2"x 1 1/2"

  

    2 1/2 x 2"

  


  

  


    3"x 2"

  

    3"x 2 1/2"

  

    4"x 2"

  

    4"x 3"

  


  

  

    

      

PVC 8300 90° Elbow (Hub x Hub)(806-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 8301 90° Elbow (Hub x FPT)(807-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  


  

  

    

      

PVC 8302 90° Elbow (FPT x FPT)(808-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8309 45° Elbow (Hub x Hub)(817-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 8312 45° Elbow (FPT x FPT)(819-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8400 Reducing Tee (All Hub)(801-xxx)
    		
  


  


    3/4" x 3/4" x 1/2"

  

    1" x 1" x 1/2"

  

    1" x 1" x 3/4"

  

    1 1/4" x 1 1/4" x 1",

  


  

  


    1 1/2" x 1 1/2" x 3/4"

  

    1 1/2" x 1 1/2" x 1"

  

    1 1/2" x 1 1/2" x 1 1/4"

  

    2" x 2" x 1/2"

  


  

  


    2" x 2" x 3/4"

  

    2" x 2" x 1"

  

    2" x 2" x 1 1/2"

  

    3" x 3" x 2"

  


  

  


    4" x 4" x 2"

  

    4" x 4" x 3"

  

    6" x 6" x 2"

  

    6" x 6" x 4"

  


  

  


    8" x 8" x 6"

  


  

  

    

      

PVC 8400 Tee (All Hub)(801-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    

      

PVC 8401 Tee(Hub x Hub x FPT)(802-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  


  

  

    

      

PVC 8402 Tee (FPT x FPT x FPT)(805-xxx)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8600 Wye (All Hub)(875-xxx)
    		
  


  


    1 1/2"

  

    2"

  

    3"

  

    4"

  


  

  


    6"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ ^ [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

PVC 8710 Sch 80 Union w/EPDM O-Ring (Hub x Hub)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    

      

PVC 8830 Sch 80 Union w/EPDM O-Ring Seal (HubxFPT)
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ PVC and CPVC unions rated at 235 psi @ 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ ^ [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

PVC 8800 Sch 80 Union w/Viton O-Ring FPT x FPT
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ PVC and CPVC unions rated at 235 psi @ 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ ^ [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

PVC 8810 Sch 80 Union w/EPDM O-Ring FPT x FPT
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ PVC and CPVC unions rated at 235 psi @ 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ ^ [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

PVC 8820 Sch 80 Union w/Viton O-Ring Hub x FPT
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
^ PVC and CPVC unions rated at 235 psi @ 73°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings^ +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    
1/2" - 4" Sch 80
    
  


  

  

    

      

CPVC 8700 Sch 80 Union w/Viton O-Ring Hub x Hub
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
^ PVC and CPVC unions rated at 235 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings^ +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

CPVC 8800 Sch 80 Union w/Viton O-Ring FPT x FPT
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
^ PVC and CPVC unions rated at 235 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings^ +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

CPVC 8810 Sch 80 Union w/EPDM O-Ring FPT x FPT
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
^ PVC and CPVC unions rated at 235 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings^ +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

CPVC 8710 Sch 80 Union w/EPDM O-Ring Hub x Hub
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    3"

  


  

  

    
	
		 
		 
^ PVC and CPVC unions rated at 235 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% + [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry or CP&F		
    
ASTM F1970		



  


  

    

      

PVC 8500 Sch 80 Flange (One Piece) Socket
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    

      

PVC 8560 Sch 80 Flange (One Piece) FPT
    		
  


  


    1/2"

  

    3/4"

  

    1"

  

    1 1/4"

  


  

  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% + [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry or CP&F		
    
ASTM F1970		



  


  

    

      

PVC 8530 Sch 80 Van Stone Flange Hub
    		
  


  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  

    10"

  


  

  


    12"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% + [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry or CP&F		
    
ASTM F1970		



  


  

    

      

PVC 8510 Sch 80 Blind Flange
    		
  


  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% + [G]		
    
PVC I-G1		

Charlotte Pipe & Foundry or CP&F		
    
ASTM F1970		



  


  

    

      

PVC 8510 Sch 80 Blind Flange
    		
  


  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

CPVC 8500 Sch 80 Flange (One Piece) Hub
    		
  


  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  

    10"

  


  

  


    12"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

CPVC 8560 Sch 80 Flange (One Piece) FPT
    		
  


  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

CPVC 8530 Sch 80 Van Stone Flange Hub
    		
  


  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings% +++ [G]		
    
CPVC 41		

Charlotte Pipe & Foundry		
    
ASTM F1970		



  


  

    

      

CPVC 8510 Sch 80 Blind Flange
    		
  


  


    1 1/2"

  

    2"

  

    2 1/2"

  

    3"

  


  

  


    4"

  

    6"

  

    8"

  


  

  

    
	
		 
		 
% PVC and CPVC flanges rated at 150 psi @ 73°F
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing§ [G]		
    
PVC 1120 IC-1		

Charlotte Pipe® TrueFit® System***		
    
ASTM F480		



  


  

    

      

2" - 14", 16" Sch 40
    		
  


  


    4.500" IC-1

  

    6.250" IC-1

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLNC in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Well Casing§ [G]		
    
PVC 1120 IC-0		

Charlotte Pipe® TrueFit® System***		
    
ASTM F480		



  


  

    
2" - 14", 16" Sch 40
    
  


  

  

    
4", 6" SDR 26
    
  


  

  

    
4", 6" - 14", 16" SDR 21
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLNC in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Muncy, PA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D1785		



  


  

    
1/2" - 6" Sch 40˘
    
  


  

  

    

      

1/2" - 8" Sch 80
    		
  


  

  

    
8" - 12" Sch 40
    
  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production location code PLPA in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + ˘ [G]		
    
PVC		

Charlotte Pipe®	 TrueFit® System***		
    
CSA B137.3		



  


  

    
1/2", 3/4", 1", 1 1/4"	, 1 1/2", 2", 3", 4", 6" Sch 40
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production location code PLPA in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D2241		



  


  

    
1" - 6" SDR 26
    
  


  

  

    
1/2" SDR 13.5
    
  


  

  

    
3/4" - 2" SDR 21
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production location code PLPA in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing+ [G]		
    
PVC 1120 IC-0		

Charlotte Pipe® TrueFit® System***		
    
ASTM F480		



  


  

    
2" - 12" Sch 40
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
*** These pipe products may also be represented by the trade name: Charlotte Pipe® and may
    include the production location code PLPA in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Cameron, TX



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D1785		



  


  

    
1/2" -  8" Sch 80
    
  


  

  

    
1/2" - 12" Sch 40
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLTX in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D2241		



  


  

    
1" - 6" SDR 26
    
  


  

  

    
1/2" SDR 13.5
    
  


  

  

    
3/4" - 2" SDR 21
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLTX in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing+ [G]		
    
PVC 1120 IC-0		

Charlotte Pipe® TrueFit® System***		
    
ASTM F480		



  


  

    
2" - 12" Sch 40
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLTX in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Cedar City, UT



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D1785		



  


  

    
1/2" - 8" Sch 80
    
  


  

  

    
1/2" - 8" Sch 40
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLUT in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + § [G]		
    
PVC 1120		

Charlotte Pipe® TrueFit® System***		
    
ASTM D2241		



  


  

    
1/2" SDR 13.5
    
  


  

  

    
3/4" - 2" SDR 21
    
  


  

  

    
1 1/4" - 2" SDR 26
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLUT in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* § +++ [G]		
    
CPVC 4120		

Charlotte Pipe® PLUT Flowguard Gold® CPVC**		
    
ASTM D2846		



  


  

    
1/2" - 2" SDR 11
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
** These pipe products may also be represented by the trade names: Charlotte PLUT TrueFit®
   CPVC CTS Pipe™, Charlotte Pipe® PLUT, Charlotte Pipe® PLUT CPVC CTS™, and Charlotte
   Pipe® PLUT TrueFit® System.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing[G]		
    
PVC 1120 IC-0		

Charlotte Pipe® TrueFit® System***		
    
ASTM F480		



  


  

    
2" - 14", 16" Sch 40
    
  


  

  

    
6" - 14", 16" SDR 21
    
  


  

  

    
	
		 
		 
*** These pipe products  may also be represented by the trade name: Charlotte Pipe® and may
    include the production 
    location code PLUT in the trade name.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Cirque Sales & Distribution, Inc 
13504 Northeast 84th Street
Suite 103-267 
Vancover, WA 98682 
United States 
888-710-6667 
360-326-7003


Facility : #  1 USA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* ^ § +++ [G]		
    
PEX 1306		

SafePEX Pro Blue UV-Shield		
    
ASTM F876/F877		



  


  

    
3/8" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* ^ ˘ § +++ [G]		
    
PEX		

SafePEX Pro Blue UV-Shield		
    
CSA B137.5		



  


  

    
3/8" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* ^ § +++ [G]		
    
PEX 1306		

SafePEX Pro Red UV-Shield		
    
ASTM F876/F877		



  


  

    
3/8" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* ^ ˘ § +++ [G]		
    
PEX		

SafePEX Pro Red UV-Shield		
    
CSA B137.5		



  


  

    
3/8" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* ^ § +++ [G]		
    
PEX 1306		

SafePEX Pro White UV-Shield		
    
ASTM F876/F877		



  


  

    
3/8" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* ^ ˘ § +++ [G]		
    
PEX		

SafePEX Pro White UV-Shield		
    
CSA B137.5		



  


  

    
3/8" - 2" SDR 9
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Cixi Welday Plastic Product Co., Ltd. 
8# Hua Yuan Road, Fanshi Industry Zone
Cixi, Ningbo City 
Zhejiang Province 315312 
China 
86 574 23617000
Visit this company's website


Facility : Zhejiang Province, China



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings§ +++ [G]		
    
PPSU		

WELDAY PEX		
    
ASTM F2159		



  


  

    

      

Plastic Adapter
    		
  


  


    3/8" PEX x 1/2" (35234)

  

    3/8" PEX x 1/2" MPT (34034)

  

    1/2" PEX x 1/2" FPT (35244)

  

    1/2" PEX x 1/2" MPT (34044)

  


  

  


    1/2" PEX x 3/4" FPT (35246)

  

    3/4" PEX x 1/2" MPT (34064) 

  

    3/4" PEX x 3/4" FPT (35266)

  

    3/4" PEX x 3/4" MPT (34066)

  


  

  


    3/4" PEX x 1" FPT (35267)

  

    3/4" PEX x 1" MPT (34067)

  

    1" PEX x 3/4" MPT (34076)

  

    1" PEX x 1" FPT (35277)

  


  

  


    1" PEX x 1" MPT (34077)

  

    1/2" PEX x 3/4" MPT (34046) 

  


  

  

    

      

Plastic Elbow
    		
  


  


    1/2" PEX x 1/2" MPT (34144) 

  

    1/2" PEX x 3/8" MPT (34143) 

  

    3/4" PEX x 1/2" MPT (34164) 

  

    3/4" PEX x 3/4" MPT (34166) 

  


  

  

    

      

Plastic PEX Coupling
    		
  


  


    3/8" (33133)

  

    3/8" x 1/2" (33443)

  

    3/4" x 1/2" (33464)

  

    1/2" (33144)

  


  

  


    3/4" (33166)

  

    1" x 3/4" (33476)

  

    1" (33177)

  

    1" x 1/2" (33474) 

  


  

  

    

      

Plastic PEX Elbow
    		
  


  


    3/8" (32133)

  

    3/4" x 1/2" (32064)

  

    1/2" (32144)

  

    3/4" (32166)

  


  

  


    1" (32177)

  


  

  

    

      

Plastic PEX Plug
    		
  


  


    3/8" (30030) 

  

    1/2" (35050) 

  

    3/4" (35075)

  

    1" (30060)

  


  

  

    

      

Plastic PEX Tee
    		
  


  


    3/8" (31103)

  

    1/2" (31104)

  

    1/2" x 1/2" x 3/4" (39446)

  

    3/4" (31106)

  


  

  


    3/4" x 1/2" x 1/2" (39644)

  

    3/4" x 1/2" x 3/4" (39646)

  

    3/4" x 3/4" x 1/2" (39664)

  

    1" (31107)

  


  

  


    3/4" x 3/4" x 1" (39667) 

  

    1" x 3/4" x 3/4" (39766)

  

    1" x 3/4" x 1" (39767)

  

    1" x 1" x 1/2" (39774)

  


  

  


    1" x 1" x 3/4" (39776)

  


  

  

    

      

Plastic Swivel Adapter
    		
  


  


    3/8" PEX x 1/2" (35134)

  

    1/2" PEX x 1/2" FPT (35144)

  

    1/2" PEX x 3/4" (35146)

  

    3/4" PEX x 3/4" FPT (35166)

  


  

  

    

      

Plastic Swivel Elbow
    		
  


  


    1/2" PEX x 1/2" FPT (32544)

  

    3/4" PEX x 3/4" FPT (32566) 

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings§ +++ [G]		
    
PPSU		

WELDAY PEX		
    
ASTM F877		



  


  

    

      

Plastic Adapter
    		
  


  


    3/8" PEX x 1/2" FPT (35234)

  

    3/8" PEX x 1/2" MPT (34034)

  

    1/2" PEX x 1/2" FPT (35244)

  

    1/2" PEX x 1/2" MPT (34044)

  


  

  


    1/2" PEX x 3/4" FPT (35246)

  

    1/2" PEX x 3/4" MPT (34046) 

  

    3/4" PEX x 1/2" MPT (34064) 

  

    3/4" PEX x 3/4" FPT (35266)

  


  

  


    3/4" PEX x 3/4" MPT (34066)

  

    3/4" PEX x 1" FPT (35267)

  

     3/4" PEX x 1" MPT (34067)

  

    1" PEX x 3/4" MPT (34076)

  


  

  


    1" PEX x 1" FPT (35277)

  

    1" PEX x 1" MPT (34077)

  


  

  

    

      

Plastic Elbow
    		
  


  


    1/2" PEX x 3/8" MPT (34143) 

  

    1/2" PEX x 1/2" MPT (34144) 

  

    3/4" PEX x 1/2" MPT (34164) 

  

    3/4" PEX x 3/4" MPT (34166) 

  


  

  

    

      

Plastic PEX Coupling
    		
  


  


    3/8" (33133)

  

    3/8" x 1/2" (33443)

  

    3/4" x 1/2" (33464)

  

    1/2" (33144)

  


  

  


    3/4" (33166)

  

    1" x 3/4" (33476)

  

    1" (33177)

  

    1" x 1/2" (33474) 

  


  

  

    

      

Plastic PEX Elbow
    		
  


  


    3/8" (32133)

  

    3/4" x 1/2" (32064)

  

    1/2" (32144)

  

    3/4" (32166)

  


  

  


    1" (32177)

  


  

  

    

      

Plastic PEX Plug
    		
  


  


    3/8" (30030) 

  

    1/2" (35050) 

  

    3/4" (35075)

  

    1" (30060)

  


  

  

    

      

Plastic PEX Tee
    		
  


  


    3/8" (31103)

  

    1/2" (31104)

  

    1/2" x 1/2" x 3/4" (39446)

  

    3/4" (31106)

  


  

  


    3/4" x 1/2" x 1/2" (39644)

  

    3/4" x 1/2" x 3/4" (39646)

  

    3/4" x 3/4" x 1/2" (39664)

  

    3/4" x 3/4" x 1" (39667) 

  


  

  


    1" (31107)

  

    1" x 3/4" x 3/4" (39766)

  

    1" x 3/4" x 1" (39767)

  

    1" x 1" x 1/2" (39774)

  


  

  


    1" x 1" x 3/4" (39776)

  


  

  

    

      

Plastic Swivel Adapter
    		
  


  


    3/8" PEX x 1/2" FPT (35134)

  

    1/2" PEX x 1/2" FPT (35144)

  

    1/2" PEX x 3/4" FPT (35146)

  

    3/4" PEX x 3/4" FPT (35166)

  


  

  

    

      

Plastic Swivel Elbow
    		
  


  


    1/2" PEX x 1/2" FPT (32544)

  

    3/4" PEX x 3/4" FPT (32566) 

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ § +++ [G]		
    
PPSU		

WELDAY PEX		
    
CSA B137.5		



  


  

    

      

Plastic Adapter
    		
  


  


    3/8" PEX x 1/2" FPT (35234)

  

    3/8" PEX x 1/2" MPT (34034)

  

    1/2" PEX x 1/2" (35244)

  

    1/2" PEX x 1/2" MPT (34044)

  


  

  


    1/2" PEX x 3/4" FPT (35246)

  

    1/2" PEX x 3/4" MPT (34046) 

  

    3/4" PEX x 1/2" MPT (34064) 

  

    3/4" PEX x 3/4" FPT (35266)

  


  

  


    3/4" PEX x 3/4" MPT (34066)

  

    3/4" PEX x 1" FPT (35267)

  

    3/4" PEX x 1" MPT (34067)

  

    1" PEX x 3/4" MPT (34076)

  


  

  


    1" PEX x 1" FPT (35277)

  

    1" PEX x 1" MPT (34077)

  


  

  

    

      

Plastic Elbow
    		
  


  


    1/2" PEX x 1/2" MPT (34144) 

  

    1/2" PEX x 3/8" MPT (34143) 

  

    3/4" PEX x 1/2" MPT (34164) 

  

    3/4" PEX x 3/4" MPT (34166) 

  


  

  

    

      

Plastic PEX Coupling
    		
  


  


    3/8" (33133)

  

    3/8" x 1/2" (33443)

  

    3/4" x 1/2" (33464)

  

    1/2" (33144)

  


  

  


    3/4" (33166)

  

    1" x 3/4" (33476)

  

    1" (33177)

  

    1" x 1/2" (33474) 

  


  

  

    

      

Plastic PEX Elbow
    		
  


  


    3/8" (32133)

  

    3/4" x 1/2" (32064)

  

    1/2" (32144)

  

    3/4" (32166)

  


  

  


    1" (32177)

  


  

  

    

      

Plastic PEX Plug
    		
  


  


    3/8" (30030) 

  

    1/2" (35050) 

  

    3/4" (35075)

  

    1" (30060)

  


  

  

    

      

Plastic PEX Tee
    		
  


  


    3/8" (31103)

  

    1/2" (31104)

  

    1/2" x 1/2" x 3/4" (39446)

  

    3/4" (31106)

  


  

  


    3/4" x 1/2" x 1/2" (39644)

  

    3/4" x 1/2" x 3/4" (39646)

  

    3/4" x 3/4" x 1/2" (39664)

  

    3/4" x 3/4" x 1" (39667) 

  


  

  


    1" (31107)

  

    1" x 3/4" x 3/4" (39766)

  

    1" x 3/4" x 1" (39767)

  

    1" x 1" x 1/2" (39774)

  


  

  


    1" x 1" x 3/4" (39776)

  


  

  

    

      

Plastic Swivel Adapter
    		
  


  


    3/8" PEX x 1/2" FPT (35134)

  

    1/2" PEX x 1/2" FPT (35144)

  

    1/2" PEX x 3/4" FPT (35146)

  

    3/4" PEX x 3/4" FPT (35166)

  


  

  

    

      

Plastic Swivel Elbow
    		
  


  


    1/2" PEX x 1/2" FPT (32544)

  

    3/4" PEX x 3/4" FPT (32566) 

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Colonial Engineering, Inc. 
6400 Corporate Avenue
Portage, MI 49002 
United States 
269-323-2495 X 3114


Facility : #  1 China



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Valves (PW)+ @ [G]		
    
PVC I-G1		

Colonial Engineering		
    
ASTM F1970		



  


  

    

      

Compact Ball Valves - Solvent Weld
    		
  


  


    V07491N - 1/2"

  

    V07691N - 1/2"

  

    V08491N - 3/4"

  

    V08691N - 3/4"

  


  

  


    V10491N - 1"

  

    V10691N - 1"

  

    V14491N - 1 1/4"

  

    V14691N - 1 1/4"

  


  

  


    V17491N - 1 1/2"

  

    V17691N - 1 1/2"

  

    V20491N - 2"

  

    V20691N - 2"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Valves (PW)+ @ [G]		
    
PVC I-G1		

Colonial Engineering		
    
ASTM F1970		



  


  

    

      

Compact Ball Valves - Threaded
    		
  


  


    V07591N - 1/2"

  

    V07791N - 1/2"

  

    V08591N - 3/4"

  

    V08791N - 3/4"

  


  

  


    V10591N - 1"

  

    V10791N - 1"

  

    V14591N - 1 1/4"

  

    V14791N - 1 1/4"

  


  

  


    V17491N - 1 1/2"

  

    V17791N - 1 1/2"

  

    V20591N - 2"

  

    V20791N - 2"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : #  1 Taiwan



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Valves (PW)+ @ [G]		
    
PVC I-G1		

Colonial Engineering		
    
ASTM F1970		



  


  

    

      

Compact Ball Valves - Solvent Weld
    		
  


  


    V07491N - 1/2"

  

    V07691N - 1/2"

  

    V08491N - 3/4"

  

    V08691N - 3/4"

  


  

  


    V10491N - 1"

  

    V10691N - 1"

  

    V14491N - 1 1/4"

  

    V14691N - 1 1/4"

  


  

  


    V17491N - 1 1/2"

  

    V17691N - 1 1/2"

  

    V20491N - 2"

  

    V20691N - 2"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Valves (PW)+ @ [G]		
    
PVC I-G1		

Colonial Engineering		
    
ASTM F1970		



  


  

    

      

Compact Ball Valves - Threaded
    		
  


  


    V07591N - 1/2"

  

    V07791N - 1/2"

  

    V08591N - 3/4"

  

    V08791N - 3/4"

  


  

  


    V10591N - 1"

  

    V10791N - 1"

  

    V14591N - 1 1/4"

  

    V14791N - 1 1/4"

  


  

  


    V17491N - 1 1/2"

  

    V17791N - 1 1/2"

  

    V20591N - 2"

  

    V20791N - 2"

  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
@ PVC Valves rated as 150 psi at 73°F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







ComfortPro Systems LLC 
8150 Lehigh Avenue
Morton Grove, IL 60053 
United States 
800-968-8905 


Facility : Middlefield, OH



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Tubing# * ^ ˘ § [G]		
    
PEX 3006		

AquaHeat		
    
ASTM F876/F877		



  


  

    
1/4" - 1 1/4" SDR 9
    
  


  

  

    
	
		 
		 
# Authorized for blue, gray, natural, red, and white colors.
* Product is barrier tubing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing# * ˘ [G]		
    
PEX		

AquaHeat		
    
CSA B137.5		



  


  

    
1/2" - 1" SDR 9
    
  


  

  

    
	
		 
		 
# Authorized for blue, gray, natural, red, and white colors.
* Product is barrier tubing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing# ^ ˘ § [G]		
    
PEX 3006		

AquaSeal		
    
ASTM F876/F877		



  


  

    
1/4" - 1 1/4" SDR 9
    
  


  

  

    
	
		 
		 
# Authorized for blue, gray, natural, red, and white colors.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing# * ˘ [G]		
    
PEX		

AquaSeal		
    
CSA B137.5		



  


  

    
1/2" - 1" SDR 9
    
  


  

  

    
	
		 
		 
# Authorized for blue, gray, natural, red, and white colors.
* Product is barrier tubing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Conbraco Industries, Inc. 
1418 South Pearl Street
Pageland, SC 29728 
United States 
843-672-6161


Facility : Zhejiang, China



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings§ +++ [G]		
    
Brass		

C-PEX		
     

	SE 7956
   		
    


  


  


    APXT12LF 1/2T PEX Tee

  

    APXT38LF 3/8T PEX Tee

  

    APXMA3412LF 3/4Tx1/2M PEX Male Coupling

  

    APXMA11LF 1Tx1M PEX Male Coupling

  


  

  


    APXP1LF 1/2T PEX Plug

  

    APXP1LF 1T PEX Plug

  

    APXMA3434LF 3/4Tx3/4M PEX Male Coupling

  

    APXT112LF 1Tx1Tx1/2T PEX Tee

  


  

  


    APXC1234LF 1/2Tx3/4T PEX Coupling

  

    APXC1238LF 1/2T x 3/8T PEX Coupling

  

    APXC3838LF 3/8T PEX Coupling

  

    APXT111LF 1T PEX Tee

  


  

  


    APXT1134LF 1Tx1Tx3/4T PEX Tee

  

    APXT34LF 3/4T PEX Tee

  

    APXT343412LF 3/4Tx3/4Tx1/2T PEX Tee

  

    APXT121234LF 1/2Tx1/2Tx3/4T PEX Tee

  


  

  


    APXMA1234LF 1/2Tx3/4M PEX Male Coupling

  

    APXMA1212LF 1/2Tx1/2M PEX Male Coupling

  

    APXFA3434LF 3/4Tx3/4F PEX Female Coupling

  

    APXFA1234LF 1/2Tx3/4F PEX Female Coupling

  


  

  


    APXFA1212LF 1/2Tx1/2F PEX Female Coupling

  

    APXC341LF 3/4Tx1T PEX Coupling

  

    APXC3434LF 3/4T PEX Coupling

  

    APXP34LF 3/4T PEX Plug

  


  

  


    APXFSA11LF 1Tx1W PEX Female Sweat Coupling

  

    APXMA341LF 3/4Tx1M PEX Male Coupling

  

    APXMSA11LF 1Tx1W PEX Male Sweat Coupling

  

    APXFA11LF 1Tx1F PEX Female Coupling

  


  

  


    APXC1212LF 1/2T PEX Coupling

  

    APCX11LF 1T PEX Coupling

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ +++ [G]		
    
Brass		

C-PEX		
    
CSA B137.5		



  


  


    CPXC3838LF 3/8T PEX Coupling

  

    CPXC1238LF 1/2T x 3/8T PEX Coupling

  

    CPXC11LF 1T PEX Coupling

  

    CPXC341LF 3/4Tx1T PEX Coupling

  


  

  


    CPXC3434LF 3/4T PEX Coupling

  

    CPXP12LF 1/2T PEX Plug

  

    CPXT34LF 3/4T PEX Tee

  

    CPXT111LF 1T PEX Tee

  


  

  


    CPXFA3434LF 3/4Tx3/4F PEX Female Coupling

  

    CPXMA11LF 1Tx1M PEX Male Coupling

  

    CPXMA1234LF 1/2Tx3/4M PEX Male Coupling

  

    CPXP1LF 1T PEX Plug

  


  

  


    CPXP34LF 3/4T PEX Plug

  

    CPXMSA11LF 1Tx1W PEX Male Sweat Coupling

  

    CPXFSA11LF 1Tx1W PEX Female Sweat Coupling

  

    CPXMA341LF 3/4Tx1M PEX Male Coupling

  


  

  


    CPXMA3434LF 3/4Tx3/4M PEX Male Coupling

  

    CPXMA3412LF 3/4Tx1/2M PEX Male Coupling

  

    CPXMA1212LF 1/2Tx1/2M PEX Male Coupling

  

    CPXFA11LF 1Tx1F PEX Female Coupling

  


  

  


    CPXFA1234LF 1/2Tx3/4F PEX Female Coupling

  

    CPXFA1212LF 1/2Tx1/2F PEX Female Coupling

  

    CPXC1212LF 1/2T PEX Coupling

  

    CPXT1134LF 1Tx1Tx3/4T PEX Tee

  


  

  


    CPXT112LF 1Tx1Tx1/2T PEX Tee

  

    CPXT343412LF 3/4Tx3/4Tx1/2T PEX Tee

  

    CPXT121234LF 1/2Tx1/2Tx3/4T PEX Tee

  

    CPXT12LF 1/2T PEX Tee

  


  

  


    CPXT38LF 3/8T PEX Tee

  

    CPXC1234LF 1/2Tx3/4T PEX Coupling

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Conbraco Industries, Inc. 
701 Matthews-Mint Hill Road
Matthews, NC 28105 
United States 
704-847-9191


Facility : Foshan, China



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Crimp Fittings* ˘ § +++ [G]		
    
MLTPL		

Apollo		
    
CSA B137.5		



  


  

    
1/2" - 1"
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Crimp Fittings* § +++ [G]		
    
MLTPL		

Apollo		
     

	SE 7956
   		
    


  


  

    
1/2" - 2 1/2"
    
  


  

  

    
	
		 
		 
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing$ * ^ § +++ [G]		
    
PEX 5006		

Apollo		
    
ASTM F876/F877		



  


  

    
>= 1/8" SDR 9
    
  


  

  

    
	
		 
		 
$ Certified for blue, natural, red, and white without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing$ * ^ § +++ [G]		
    
PEX 5006		

Apollo		
    
AWWA C904		



  


  

    
1/2" - 1 1/2" SDR 9
    
  


  

  

    
	
		 
		 
$ Certified for blue, natural, red, and white without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing$ * ^ ˘ § +++ [G]		
    
PEX		

Apollo		
    
CSA B137.5		



  


  

    
>= 1/8" SDR 9
    
  


  

  

    
	
		 
		 
$ Certified for blue, natural, red, and white without oxygen barrier.
* Accepted by NSF for use in residential and commercial construction, including
  manufactured housing.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Conbraco Industries, Inc. 
701 Matthews-Mint Hill Road
Matthews, NC 28105 
United States 
704-847-9191


Facility : #  1 China



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings§ +++ [G]		
    
PPSU		

Apollo PEX		
    
ASTM F2159		



  


  

    

      

Plastic PEX Coupling
    		
  


  


    1/2" (PXPAC12)

  

    1/2" (PXPAC1220PK)

  

    3/4" (PXPAC34)

  

    3/4" (PXPAC3420PK)

  


  

  


    3/4" x 1/2" (PXPAC3412)

  


  

  

    

      

Plastic PEX Elbow
    		
  


  


    1/2" (PXPAE12)

  

    1/2" (PXPAE1220PK)

  

    3/4" (PXPAE34)

  

    3/4" (PXPAE3420PK)

  


  

  

    

      

Plastic PEX Plug
    		
  


  


    1/2" (PXPAP12)

  

    3/4" (PXPAP34)

  


  

  

    

      

Plastic PEX Tee
    		
  


  


    1/2" (PXPAT12)

  

    1/2" (PXPAT1220PK)

  

    3/4" (PXPAT34)

  

    3/4" (PXPAT3420PK)

  


  

  


    3/4" x 3/4" x 1/2" (PXPA343412)

  

    3/4" x 3/4" x 1/2" (PXPA34341220PK)

  


  

  

    

      

Plastic Swivel Adapter
    		
  


  


    1/2" PEX x 1/2" FPT (PXPAFB1212S)

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings§ +++ [G]		
    
PPSU		

Apollo PEX		
    
ASTM F877		



  


  

    

      

Plastic PEX Coupling
    		
  


  


    1/2" (PXPAC12)

  

    1/2" (PXPAC1220PK)

  

    3/4" (PXPAC34)

  

    3/4" (PXPAC3420PK)

  


  

  


    3/4" x 1/2" (PXPAC3412)

  


  

  

    

      

Plastic PEX Elbow
    		
  


  


    1/2" (PXPAE12)

  

    1/2" (PXPAE1220PK)

  

    3/4" (PXPAE34)

  

    3/4" (PXPAE3420PK)

  


  

  

    

      

Plastic PEX Plug
    		
  


  


    1/2" (PXPAP12)

  

    3/4" (PXPAP34)

  


  

  

    

      

Plastic PEX Tee
    		
  


  


    1/2" (PXPAT12)

  

    1/2" (PXPAT1220PK)

  

    3/4" (PXPAT34)

  

    3/4" (PXPAT3420PK)

  


  

  


    3/4" x 3/4" x 1/2" (PXPA343412)

  

    3/4" x 3/4" x 1/2" (PXPA34341220PK)

  


  

  

    

      

Plastic Swivel Adapter
    		
  


  


    1/2" PEX x 1/2" FPT (PXPAFB1212S)

  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings˘ § +++ [G]		
    
PPSU		

Apollo PEX		
    
CSA B137.5		



  


  

    

      

Plastic PEX Coupling
    		
  


  


    1/2" (PXPAC12)

  

    1/2" (PXPAC1220PK)

  

    3/4" (PXPAC34)

  

    3/4" (PXPAC3420PK)

  


  

  


    3/4" x 1/2" (PXPAC3412)

  


  

  

    

      

Plastic PEX Elbow
    		
  


  


    1/2" (PXPAE12)

  

    1/2" (PXPAE1220PK)

  

    3/4" (PXPAE34)

  

    3/4" (PXPAE3420PK)

  


  

  

    

      

Plastic PEX Plug
    		
  


  


    1/2" (PXPAP12)

  

    3/4" (PXPAP34)

  


  

  

    

      

Plastic PEX Tee
    		
  


  


    1/2" (PXPAT12)

  

    1/2" (PXPAT1220PK)

  

    3/4" (PXPAT34)

  

    3/4" (PXPAT3420PK)

  


  

  


    3/4" x 3/4" x 1/2" (PXPA343412)

  

    3/4" x 3/4" x 1/2" (PXPA34341220PK)

  


  

  

    

      

Plastic Swivel Adapter
    		
  


  


    1/2" PEX x 1/2" FPT (PXPAFB1212S)

  


  

  

    
	
		 
		 
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Conbraco Industries, Inc. 
701 Matthews-Mint Hill Road
Matthews, NC 28105 
United States 
704-847-9191


Facility : #  2 USA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Tubing@ ^ ++ [G]		
    
PEX 5306		

Apollo®		
    
ASTM F876/F877		



  


  

    
1/2" SDR 9
    
  


  

  

    
3/4" SDR 9
    
  


  

  

    
1" SDR 9
    
  


  

  

    
	
		 
		 
@ Black inner layer with blue, red, or white outer layer.
^ Meets the chlorine resistance requirements of ASTM F876 when tested in accordance with
  ASTM F2023.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
   temperatures up to and including Domestic Hot (140° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
Cresline Plastic Pipe Co., Inc. 
600 Cross Pointe Boulevard
Evansville, IN 47715 
United States 
270-826-8317


Facility : Phoenix, AZ



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D1785		



  


  

    
1/2" - 2" Sch 120
    
  


  

  

    
1/2" - 12" Sch 40§
    
  


  

  

    

      

1/2" - 12" Sch 80§
    		
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D2241		



  


  

    
1/2" - 6" SDR 13.5§
    
  


  

  

    

      

3/4" - 12" SDR 21§
    		
  


  

  

    

      

1 1/4" - 12" SDR 26§
    		
  


  

  

    

      

1 1/4" - 8" SDR 32.5
    		
  


  

  

    
3" - 8" SDR 41
    
  


  

  

    
	
		 
		 
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
  manufacturer's instructions and the requirements of the latest edition of the Uniform
  Plumbing Code™.

* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing[G]		
    
PVC 1120 IC-1		

Cresline		
    
ASTM F480		



  


  

    
4" - 12" SDR 21
    
  


  

  

    
4" - 8" SDR 26
    
  


  

  

    
4" - 8" Sch 40
    
  


  

  

    
4" - 6" SDR 32.5
    
  


  

  

    
4" - 6" Sch 80
    
  


  

  

    
5" SDR 17
    
  


  

  

    
6" SDR 17
    
  


  

  

    
	
		 
		 
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Council Bluffs, IA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline HD		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
1/2" - 1 1/4" SIDR 11.5
    
  


  

  

    
1" - 2" SIDR 19
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline HD		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline HD-CTS		
    
AWWA C901		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline HD-CTS		
    
ASTM D2737		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		


    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
1/2" - 1 1/4" SIDR 11.5
    
  


  

  

    
1" - 2" SIDR 19
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline NT		
    
ASTM D2239		



  


  

    
3/4" - 1 1/4" SIDR 7
    
  


  

  

    
1/2" - 2" SIDR 11.5
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline® CE Blue™		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline® CE Blue™		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline® CE Blue™		
    
ASTM D2239		



  


  

    
1" - 2" SIDR 19
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline® CE Blue™		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline® CE Blue™		
    
ASTM D2737		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline® CE Blue™		
    
AWWA C901		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D1785		



  


  

    
1/2" - 12" Sch 40
    
  


  

  

    
1/2" - 12" Sch 80
    
  


  

  

    
1" - 2" Sch 120
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D1785		



  


  

    
1/2" - 12" Sch 40
    
  


  

  

    
1/2" - 12" Sch 80
    
  


  

  

    
1" - 2" Sch 120
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
1/2" - 12" SDR 21
    
  


  

  

    
5" SDR 17
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
1/2" - 12" SDR 21
    
  


  

  

    
5" SDR 17
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing[G]		
    
PVC 1120 IC-0		

Cresline		
    
ASTM F480		



  


  

    
4" - 8" SDR 26
    
  


  

  

    
4" - 8" SDR 21
    
  


  

  

    
4 1/2" - 8" SDR 17
    
  


  

  

    
2" - 12" Sch 40
    
  


  

  

    
4 1/2" DR 20
    
  


  

  

    
6 1/4" DR 27.6
    
  


  

  

    
	
		 
		 
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Henderson, KY



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline HD		
    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
1/2" - 1 1/4" SIDR 11.5
    
  


  

  

    
1" - 2" SIDR 19
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline HD		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline HD-CTS		
    
ASTM D2737		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline HD-CTS		
    
AWWA C901		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		


    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
1/2" - 1 1/4" SIDR 11.5
    
  


  

  

    
1" - 2" SIDR 19
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline NT		
    
ASTM D2239		



  


  

    
3/4" - 1 1/4" SIDR 7
    
  


  

  

    
1/2" - 2" SIDR 11.5
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D1785		



  


  

    
1/2" - 12" Sch 40
    
  


  

  

    
1/2" -  8" Sch 80
    
  


  

  

    
1" - 2" Sch 120
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D1785		



  


  

    
1/2" - 12" Sch 40
    
  


  

  

    
1/2" -  8" Sch 80
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 21
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
5" SDR 17
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 21
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
5" SDR 17
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+++ [G]		
    
CPVC 4120		

Cresline HC		
    
ASTM D2846		



  


  

    
1/2" - 2" SDR 11
    
  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+++ [G]		
    
CPVC 4120		

Cresline Flowguard Gold HC		
    
ASTM D2846		



  


  

    
1/2" - 2" SDR 11
    
  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+++ [G]		
    
CPVC 4120		

Eagle		
    
ASTM D2846		



  


  

    
1/2" - 2" SDR 11
    
  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+++ [G]		
    
CPVC 4120		


    
ASTM D2846		



  


  

    
1/2" - 2" SDR 11
    
  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+++ [G]		
    
CPVC 4120		

Nibco		
    
ASTM D2846		



  


  

    
1/2" - 2" SDR 11
    
  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing[G]		
    
PVC 1120 IC-0		

Cresline		
    
ASTM F480		



  


  

    
4" - 8" SDR 26
    
  


  

  

    
4" - 8" SDR 21
    
  


  

  

    
4 1/2" -  6" SDR 17
    
  


  

  

    
2" - 12" Sch 40
    
  


  

  

    
6 1/4" DR 27.6
    
  


  

  

    
4 1/2" DR 20
    
  


  

  

    
4 1/2" SDR 26
    
  


  

  

    
	
		 
		 
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Mechanicsburg, PA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline HD		
    
ASTM D2239		



  


  

    
1/2" - 2" SIDR 5.3
    
  


  

  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 2" SIDR 9
    
  


  

  

    
1/2" - 1 1/4" SIDR 11.5
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
1" - 2" SIDR 19
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		

Cresline HD		
    
AWWA C901		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ ˘ [G]		
    
PE 3608		

Cresline HD		
    
CSA B137.1		



  


  

    
1/2" - 1 1/4" Series 125
    
  


  

  

    
3/4" - 2" Series 100
    
  


  

  

    
3/4" - 2" Series 160
    
  


  

  

    
3/4" - 2" Series 200
    
  


  

  

    
1" - 2" Series 80
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline HD-CTS		
    
ASTM D2737		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ [G]		
    
PE 3608		

Cresline HD-CTS		
    
AWWA C901		



  


  

    
3/4" - 2" SDR 9
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Tubing+ ˘ [G]		
    
PE 3608		

Cresline HD-CTS		
    
CSA B137.1		



  


  

    
3/4" - 2" Series 200
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PE 3608		


    
ASTM D2239		



  


  

    
3/4" - 2" SIDR 7
    
  


  

  

    
3/4" - 1 1/4" SIDR 9
    
  


  

  

    
1/2" - 1 1/4" SIDR 11.5
    
  


  

  

    
1" - 2" SIDR 19
    
  


  

  

    
3/4" - 2" SIDR 15
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D1785		



  


  

    
1/2" - 8" Sch 40
    
  


  

  

    
1/2" - 8" Sch 80
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D1785		



  


  

    
1/2" - 8" Sch 40
    
  


  

  

    
1/2" - 8" Sch 80
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
1/2" - 8" SDR 21
    
  


  

  

    
5" SDR 17
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
1/2" - 8" SDR 21
    
  


  

  

    
5" SDR 17
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this production
  facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing[G]		
    
PVC 1120 IC-0		

Cresline		
    
ASTM F480		



  


  

    
4" - 8" SDR 26
    
  


  

  

    
4" - 8" SDR 21
    
  


  

  

    
4 1/2" - 6" SDR 17
    
  


  

  

    
2" - 8" Sch 40
    
  


  

  

    
6 1/4" DR 27.6
    
  


  

  

    
4 1/2" DR 20
    
  


  

  

    
	
		 
		 
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Corsicana, TX



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D1785		



  


  

    
1/2" - 8" Sch 40
    
  


  

  

    
1/2" - 8" Sch 80
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D1785		



  


  

    
1/2" - 8" Sch 40
    
  


  

  

    
1/2" - 8" Sch 80
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 21
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
5" SDR 17
    
  


  

  

    
6" SDR 32.5
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe* + [G]		
    
PVC 1120		


    
ASTM D2241		



  


  

    
1/2" - 8" SDR 13.5
    
  


  

  

    
1/2" - 8" SDR 21
    
  


  

  

    
1/2" - 8" SDR 26
    
  


  

  

    
5" SDR 17
    
  


  

  

    
6" SDR 32.5
    
  


  

  

    
	
		 
		 
* Sockets and gasketed bell ends are not tested or Listed by NSF for this
  production facility.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing[G]		
    
PVC 1120 IC-0		

Cresline		
    
ASTM F480		



  


  

    
2" - 8" Sch 40
    
  


  

  

    
4 1/2" DR 20
    
  


  

  

    
4 1/2" - 6" SDR 17
    
  


  

  

    
4" - 8" SDR 26
    
  


  

  

    
4" - 8" SDR 21
    
  


  

  

    
6" SDR 32.5
    
  


  

  

    
6" SDR 32.5
    
  


  

  

    
	
		 
		 
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Facility : Chehalis, WA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Pipe+ [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D1785		



  


  

    
1/2" - 12" Sch 40
    
  


  

  

    
1/2" - 12" Sch 80
    
  


  

  

    
1/2" - 2" Sch 120
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Pipe+ [G]		
    
PVC 1120		

Cresline PVC		
    
ASTM D2241		



  


  

    
1/2" - 4" SDR 13.5
    
  


  

  

    
3/4" - 12" SDR 21
    
  


  

  

    
1 1/4" - 12" SDR 26
    
  


  

  

    
1 1/4" - 12" SDR 32.5
    
  


  

  

    
3" - 12" SDR 41
    
  


  

  

    
5" SDR 17
    
  


  

  

    
	
		 
		 
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  








Well Casings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Well Casing[G]		
    
PVC 1120 IC-0		

Cresline		
    
ASTM F480		



  


  

    
4" thru 8" SDR 21
    
  


  

  

    
4" - 8" SDR 26
    
  


  

  

    
2" - 12" Sch 40
    
  


  

  

    
4" - 8" SDR 17
    
  


  

  

    
	
		 
		 
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  







 
D-Rep Plastics Inc. 
11256 47th Street North
Clearwater, FL 28110 
United States 
877-803-3274 
407-240-4154


Facility : #  1 USA



Joining Materials






  

    Product Type
    General Material  
    For Use With
    Trade Name
    Product Standard
  


  

    Solvent Cement (1,2,3)+++ [G]
    CPVC
    PW, DWV, SW
    GM 914 Orange CPVC
   
    ASTM F493

  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  






(1) This product was evaluated by NSF according to the requirements of NSF/ANSI Standard 61,
    Section 4.
(2) The compliance of this product with the health effect requirements of NSF/ANSI Standard
    61 was determined based on the testing of pipe and fittings assembled using the cement
    and either Weld-On® P-68®, P-70® Clear or Purple, or P-72 Clear Primers.
(3) This product is acceptable for use with pipe and fittings sized 1/2" and greater
    diameter.


 
Dura Plastic Products, Inc. 
533 East Third Street
P.O. Box 2097 
Beaumont, CA 92223 
United States 
951-845-3161
Visit this company's website


Facility : Beaumont, CA



Potable Water - Pipe and Fittings






  

    Product Type
    Material Type
    Trade Name
    Product Standard
  


  

    
Fittings+++ [G]		
    
CPVC		

Dura		
    
ASTM D2846		



  


  

    
CTS01-005 – 1/2" Tee
    
  


  

  

    
CTS01-007 – 3/4" Tee
    
  


  

  

    
CTS01-010 – 1" Tee
    
  


  

  

    
CTS01-020 – 2" x 2" x 2" Tee
    
  


  

  

    
CTS01-074 - 1/2" x 1/2" x 3/4" Tee
    
  


  

  

    
CTS01-094 – 3/4" x 1/2" x 1/2" Tee
    
  


  

  

    
CTS01-095 - 3/4" x 1/2" x 3/4" Tee
    
  


  

  

    
CTS01-101 - 3/4" x 3/4" x 1/2" Tee
    
  


  

  

    
CTS01-130 – 1" x 1" x 1/2" Tee
    
  


  

  

    
CTS01-131 – 1" x 1" x 3/4" Tee
    
  


  

  

    
CTS06-005 - 1/2" 90 Degree Elbow
    
  


  

  

    
CTS06-007 - 3/4" 90 Degree Elbow
    
  


  

  

    
CTS06-010 - 1" 90 Degree Elbow
    
  


  

  

    
CTS09-005 – 1/2" 90 Degree Street Elbow
    
  


  

  

    
CTS09-007 – 3/4" 90 Degree Street Elbow
    
  


  

  

    
CTS17-005 – 1/2" 45 Degree Elbow
    
  


  

  

    
CTS17-007 – 3/4" 45 Degree Elbow
    
  


  

  

    
CTS17-010 – 1" 45 Degree Elbow
    
  


  

  

    
CTS26-005 – 1/2" Drop Ear Elbow
    
  


  

  

    
CTS29-005 – 1/2" Coupling
    
  


  

  

    
CTS29-007 – 3/4" Coupling
    
  


  

  

    
CTS29-010 – 1" Coupling
    
  


  

  

    
CTS29-101 – 3/4" x 1/2" Reducing Coupling
    
  


  

  

    
CTS35-005 - 1/2" Female Adapter
    
  


  

  

    
CTS35-007 - 3/4" Female Adapter
    
  


  

  

    
CTS35-010 - 1" Female Adapter
    
  


  

  

    
CTS36-005 – 1/2" Male Adapter
    
  


  

  

    
CTS36-007 – 3/4" Male Adapter
    
  


  

  

    
CTS36-010 – 1" Male Adapter
    
  


  

  

    
CTS37-101 - 3/4" x 1/2" Reducer Bushing
    
  


  

  

    
CTS47-005 – 1/2" Cap
    
  


  

  

    
CTS47-007 – 3/4" Cap
    
  


  

  

    
CTS47-010 – 1" Cap
    
  


  

  

    
	
		 
		 
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
    temperatures up to and including Commercial Hot (180° F).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


    		
  


  

    
Fittings+ [G]		
    
PVC		

DURA		
    
ASTM D2467		



  


  

    

      

45° Ell (S x S) Sch 80
    		
  


  


    1/2" - 8"

  

    10"

  


  

  

    

      

90° Ell (S x FPT) Sch 80
    		
  


  


    1/4" - 3"

  


  

  

    

      

90° Ell (S x S) Sch 80
    		
  


  


    1/4" - 8"

  

    10"

  


  

  

    

      

90° Street Ell (Mipt x Fipt) Sch 80
    		
  


  


    1", 1 1/4", 1 1/2"

  


  

  

    

      

90° Street Ell (Mipt x Slip) Sch 80
    		
  


  


    1", 1 1/4", 1 1/2"

  


  

  

    

      

90° Street Ell (Spg x Fipt) Sch 80
    		
  


  


    1", 1 1/4", 1 1/2"

  


  

  

    

      

90° Street Ell (Spg x Slip) Sch 80
    		
  


  


    1", 1 1/4", 1 1/2"

  


  

  

    

      

Cap (Slip) Sch 80
    		
  


  


    1/4" - 8"

  

    10"

  


  

  

    

      

Coupling (S x S) Sch 80
    		
  


  


    1/2" - 8"

  

    10"

  

    12"

  


  

  

    

      

Female Adapter (FPT x S) Sch 80
    		
  


  


    1" x 3/4"

  

    1/4" - 2"

  

    2" x 1 1/2"

  

    3/4" x 1"

  


  

  

    

      

Female Adapter (Slip x Fipt) Sch 80
    		
  


  


    2 1/2", 3", 4"

  


  

  

    

      

Male Adapter (MPT x S) Sch 80
    		
  


  


    1 1/2" x 1 1/4"

  

    1 1/2" x 1"

  

    1 1/2" x 2"

  

    1 1/4" x 1 1/2"

  


  

  


    1 1/4" x 1"

  

    1" x 1 1/4"

  

    1" x 1/2"

  

    1" x 3/4"

  


  

  


    1/2" x 1"

  

    1/2" x 1/4"

  

    1/2" x 3/4"

  

    1/2" x 3/8"

  


  

  


    1/4" x 1/2"

  

    1/4" x 3/8"

  

    2 1/2" x 2"

  

    2" x 1 1/2"

  


  

  


    2", 2 1/2", 3", 4"

  

    3" x 2 1/2"

  

    3/4" x 1"

  

    3/4" x 1/2"

  


  

  


    3/4" x 1/4"

  

    3/4" x 3/8"

  

    3/8" x  1/2"

  

    3/8" x 1/4"

  


  

  


    4" x 3"

  


  

  

    

      

Male Adapter (Mipt x Slip) Sch 80
    		
  


  


    1", 1 1/4", 1 1/2"

  

    1/4", 3/8", 1/2", 3/4"

  


  

  

    

      

Plug (Spg) Sch 80
    		
  


  


    1/2" - 4"

  


  

  

    

      

Reducer Bushing (Spg x FPT) Sch 80
    		
  


  


    1" x 3/8"

  

    1/2" x 1/4"

  

    1/2" x 1/8"

  

    1/2" x 3/8"

  


  

  


    2 1/2" x 1"

  

    2 1/2" x 1/2"

  

    2 1/2" x 3/4"

  

    3" x 1 1/2"

  


  

  


    3" x 1 1/4"

  

    3" x 1"

  

    3" x 1/2"

  

    3" x 3/4"

  


  

  


    3/4" x 1/4"

  

    3/4" x 3/8"

  

    4" x 1 1/2"

  

    4" x 1 1/4"

  


  

  


    4" x 1"

  

    4" x 1/2"

  

    4" x 3/4"

  


  

  

    

      

Reducer Bushing (Spg x Fipt) Sch 80
    		
  


  


    1 1/2" x 1/2"

  

    1 1/4" x 1"

  

    1 1/4" x 1/2"

  

    1 1/4" x 3/4"

  


  

  


    1" x 1/2"

  

    1" x 3/4"

  

    2 1/2" x 1 1/2"

  

    2 1/2" x 1 1/4"

  


  

  


    2 1/2" x 2"

  

    3" x 2 1/2"

  

    3" x 2"

  

    3/4" x 1/2"

  


  

  


    3/8" x 1/4"

  

    4" x 2 1/2"

  

    4" x 2"

  


  

  

    

      

Reducer Bushing (Spg x S) Sch 80
    		
  


  


    1 1/2" x 1 1/4"

  

    1 1/2" x 1"

  

    1 1/2" x 1/2"

  

    1 1/2" x 3/4

  


  

  


    1 1/4" x 1"

  

    1 1/4" x 1/2"

  

    1 1/4" x 3/4"

  

    1" x 1/2"

  


  

  


    1" x 3/4"

  

    2 1/2" x 2"

  

    2" x 1 1/2"

  

    2" x 1 1/4"

  


  

  


    2" x 1/2"

  

    3" x 2 1/2"

  

    3" x 2"

  

    3/4" x 1/2"

  


  

  


    4" x 2 1/2"

  

    4" x 2"

  

    4" x 3"

  

    5" x 4"

  


  

  


    6" x 2 1/2"

  

    6" x 3"

  

    6" x 4"

  

    6" x 5"

  


  

  

    

      

Reducer Bushing (Spg x Slip) Sch 80
    		
  


  


    1/2" x 1/4"

  

    1/2" x 3/8"

  

    2 1/2" x 1 1/2"

  

    2 1/2" x 1 1/4"

  


  

  


    2 1/2" x 1"

  

    2 1/2" x 1/2"

  

    2 1/2" x 3/4"

  

    2" x 1"

  


  

  


    2" x 3/4"

  

    3" x  1/2"

  

    3" x 1 1/2"

  

    3" x 1 1/4"

  


  

  


    3" x 1"

  

    3" x 3/4"

  

    6" x 2"

  


  

  

    

      

Reducer Coupling (Slip x Slip) Sch 80
    		
  


  


    1 1/2" x 1 1/4"

  

    1 1/2" x 1"

  

    1 1/4" x 1"

  

    1" x 1/2"

  


  

  


    1" x 3/4"

  

    2" x 1 1/2"

  

    3" x 2"

  

    3/4" x 1/2"

  


  

  


    4" x 3"

  

    6" x 4"

  

    8" x 6"

  


  

  

    

      

Solid Style Flange (Blind) Sch 80
    		
  


  


    1 1/2"

  

    2 1/2"

  

    2"

  

    3"

  


  

  


    4"

  

    5"

  

    6"

  

    8"

  


  

  

    

      

Solid Style Flange (Slip) Sch 80
    		
  


  


    1 1/2"

  

    2 1/2"

  

    2"

  

    3"