These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?ProductUse=EXNG&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Endot Industries, Inc. | |
| 60 Green Pond Road | |
| Rockaway, NJ 07866 | |
| United States | |
| 800-443-6368 | |
| 973-625-8500 | |
| Visit this company's website |
Facility : Greeneville, TN
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* § |
PE 2406/2708 |
Endot Yellow Gas Pipe |
ASTM D2513 |
| 1/2" IPS SDR 9.3 | |||
| 1/2" IPS SDR 11 | |||
| 3/4" IPS SDR 11 | |||
| 1" IPS SDR 9.3 | |||
| 1" IPS SDR 9.9 | |||
| 1" IPS SDR 11 | |||
| 1" IPS SDR 13.5 | |||
| 1 1/4" IPS SDR 6 | |||
| 1 1/4" IPS SDR 9.3 | |||
| 1 1/4" IPS SDR 10 | |||
| 1 1/4" IPS SDR 11 | |||
| 1 1/4" IPS SDR 13.5 | |||
| 1 1/4" IPS SDR 17 | |||
| 1 1/2" IPS SDR 11 | |||
| 1 1/2" IPS SDR 13.5 | |||
| 1 1/2" IPS SDR 17 | |||
| 2" IPS SDR 9.3 | |||
| 2" IPS SDR 11 | |||
| 2" IPS SDR 13.5 | |||
| 2" IPS SDR 17 | |||
| 2" IPS SDR 21 | |||
| 2 1/2" IPS SDR 11 | |||
| 2 1/2" IPS SDR 13.5 | |||
| 2 1/2" IPS SDR 17 | |||
| 2 1/2" IPS SDR 21 | |||
| 3" IPS SDR 9.3 | |||
| 3" IPS SDR 11 | |||
| 3" IPS SDR 11.5 | |||
| 3" IPS SDR 13.5 | |||
| 3" IPS SDR 17 | |||
| 3" IPS SDR 21 | |||
| 3 1/2" IPS SDR 11 | |||
| 3 1/2" IPS SDR 13.5 | |||
| 3 1/2" IPS SDR 17 | |||
| 3 1/2" IPS SDR 21 | |||
| 4" IPS SDR 9.3 | |||
| 4" IPS SDR 11 | |||
| 4" IPS SDR 11.5 | |||
| 4" IPS SDR 13.5 | |||
| 4" IPS SDR 17 | |||
| 4" IPS SDR 19 | |||
| 4" IPS SDR 21 | |||
| 5" IPS SDR 11 | |||
| 5" IPS SDR 13.5 | |||
| 5" IPS SDR 17 | |||
| 5" IPS SDR 21 | |||
| 6" IPS SDR 11 | |||
| 6" IPS SDR 11.5 | |||
| 6" IPS SDR 13.5 | |||
| 6" IPS SDR 17 | |||
| 6" IPS SDR 21 | |||
| 8" IPS SDR 11 | |||
| 8" IPS SDR 11.5 | |||
| 8" IPS SDR 13.5 | |||
| 8" IPS SDR 17 | |||
| 8" IPS SDR 21 | |||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| International Pipe Inc. | |
| 605 Mercy Street | |
| P.O. Box 157 | |
| Selkirk, MB R1A 2B2 | |
| Canada | |
| 888-482-4675 | |
| 204-482-4675 |
Facility : Selkirk, Manitoba, Canada
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* ~ |
PE 2708 |
IP-G |
CSA B137.4 |
| 3/4" - 8" IPS, Series 100 | |||
| 3/4" - 8" IPS, Series 125 | |||
| 3/4" - 8" IPS, Series 160 | |||
* Gas pipe and tubing limited to outside underground use only. ~ Product is authorized to bear the cNSF Mark. |
|||
Tubing* ~ |
PE 2708 |
IP-G |
CSA B137.4 |
| 1/2", 1" | |||
* Gas pipe and tubing limited to outside underground use only. ~ Product is authorized to bear the cNSF Mark. |
|||
| J-M Manufacturing Co., Inc. |  |
| 9 Peach Tree Hill Road | |
| Livingston, NJ 07039 | |
| United States | |
| 310-693-8200 | |
| Visit this company's website |
Facility : # 8 Kingman, AZ
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* § |
PE 2406/2408 |
JM Eagle |
ASTM D2513 |
| 1/2" CTS SDR 7 | |||
| 3/4" CTS SDR 9.8 | |||
| 1" CTS SDR 9.3 | |||
| 1" CTS SDR 11.5 | |||
| 1" CTS SDR 12.5 | |||
| 1 1/4" CTS SDR 11.5 | |||
| 1 1/4" CTS SDR 15.3 | |||
| 1/2" IPS SDR 9.3 | |||
| 1/2" IPS SDR 11 | |||
| 3/4" IPS SDR 11 | |||
| 1" IPS SDR 11 | |||
| 1 1/4" IPS SDR 10 | |||
| 1 1/4" IPS SDR 11 | |||
| 1 1/2" IPS SDR 11 | |||
| 2" IPS SDR 11 | |||
| 2" IPS SDR 11.5 | |||
| 3" IPS SDR 11 | |||
| 3" IPS SDR 11.5 | |||
| 3" IPS SDR 13.5 | |||
| 3" IPS SDR 17 | |||
| 4" IPS SDR 11 | |||
| 4" IPS SDR 11.5 | |||
| 4" IPS SDR 13.5 | |||
| 4" IPS SDR 17 | |||
| 6" IPS SDR 11 | |||
| 6" IPS SDR 11.5 | |||
| 6" IPS SDR 13.5 | |||
| 6" IPS SDR 17 | |||
| 8" IPS SDR 11 | |||
| 8" IPS SDR 11.5 | |||
| 8" IPS SDR 13.5 | |||
| 10" IPS SDR 13.5 | |||
| 10" IPS SDR 15.5 | |||
| 10" IPS SDR 17 | |||
| 12" IPS SDR 11 | |||
| 12" IPS SDR 11.5 | |||
| 12" IPS SDR 13.5 | |||
| 12" IPS SDR 17 | |||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
Facility : # 17 Tulsa, OK
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* § |
PE 2406/2408 |
JM Eagle |
ASTM D2513 |
| 1/2" CTS SDR 7 | |||
| 3/4" CTS SDR 9.8 | |||
| 1" CTS SDR 9.3 | |||
| 1" CTS SDR 11.5 | |||
| 1" CTS SDR 12.5 | |||
| 1 1/4" CTS SDR 11.5 | |||
| 1 1/4" CTS SDR 15.3 | |||
| 1/2" IPS SDR 9.3 | |||
| 1/2" IPS SDR 11 | |||
| 3/4" IPS SDR 11 | |||
| 1" IPS SDR 11 | |||
| 1 1/4" IPS SDR 10 | |||
| 1 1/4" IPS SDR 11 | |||
| 1 1/2" IPS SDR 11 | |||
| 2" IPS SDR 11 | |||
| 2" IPS SDR 11.5 | |||
| 3" IPS SDR 11 | |||
| 3" IPS SDR 11.5 | |||
| 3" IPS SDR 13.5 | |||
| 3" IPS SDR 17 | |||
| 4" IPS SDR 11 | |||
| 4" IPS SDR 11.5 | |||
| 4" IPS SDR 13.5 | |||
| 4" IPS SDR 17 | |||
| 6" IPS SDR 11 | |||
| 6" IPS SDR 11.5 | |||
| 6" IPS SDR 13.5 | |||
| 6" IPS SDR 17 | |||
| 8" IPS SDR 11 | |||
| 8" IPS SDR 11.5 | |||
| 8" IPS SDR 13.5 | |||
| 10" IPS SDR 13.5 | |||
| 10" IPS SDR 15.5 | |||
| 10" IPS SDR 17 | |||
| 12" IPS SDR 11 | |||
| 12" IPS SDR 11.5 | |||
| 12" IPS SDR 13.5 | |||
| 12" IPS SDR 17 | |||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
| Performance Pipe | |
| A Div. of Chevron Phillips Chem Co., LP | |
| 5085 West Park Boulevard | |
| Suite 500 | |
| Plano, TX 75093 | |
| United States | |
| 972-599-6600 | |
| Visit this company's website |
Facility : Bloomfield, IA
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Socket Fittings$ * |
PE 2406/2708 |
Driscoplex® 6500 |
ASTM D2513 |
|
90 Degree Elbow |
|||
| 1/2", 1" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
90° Ell§ |
|||
| 1/2" CTS (SDR 7.0) | 3/4" IPS (SDR 11) | 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) |
| 1 1/2" IPS (SDR 11) | 2" IPS (SDR 11) | 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) |
|
Coupling§ |
|||
| 1/2" CTS (SDR 7.0) | |||
|
Coupling |
|||
| 1/2", 3/4", 1", 1 1/4" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
Coupling§ |
|||
| 3/4" IPS (SDR 11) | 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) | 1 1/2" IPS (SDR11) |
| 2" IPS (SDR 11) | 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) | |
|
End Cap§ |
|||
| 1/2" CTS (SDR 7.0) | |||
|
End Cap |
|||
| 1/2", 1", 1 1/4" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
End Cap§ |
|||
| 3/4" IPS (SDR 11) | 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) | 2" IPS (SDR 11) |
| 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) | ||
|
High Volume Socket Outlet Tapping Tee[4] |
|||
| 1 1/4" IPS x 2", 3", 4", 6", 8" IPS | |||
|
Purge Cap (w/ 1/2" CTS outlet) |
|||
| 1 1/4", 2", 3", 4" IPS | |||
|
Reducer§ |
|||
| 1/2" CTS x 3/4" IPS | 3/4" IPS x 1 1/4" IPS | 1" IPS x 3/4" IPS | 1" IPS x 1 1/4" IPS |
| 1 1/2" IPS x 1 1/4" IPS | 2" IPS x 1 1/4" IPS | 2" IPS x 1 1/2" IPS | 3" IPS x 2" IPS |
| 4" IPS x 3" IPS | |||
|
Reducer Coupling |
|||
| 1/2" IPS x 1/2" CTS | 3/4" CTS x 1/2" CTS | 3/4" IPS x 1/2" CTS | 3/4" IPS x 1/2" IPS |
| 1" CTS x 1/2" CTS | 1" CTS x 1/2" IPS | 1" IPS x 1/2" CTS | 1" IPS x 1/2" IPS |
| 1" IPS x 3/4" CTS | 1" IPS x 3/4" IPS | 1" CTS x 3/4" IPS | 1" IPS x 1" CTS |
| 1 1/2" IPS x 1 1/4" IPS | 1 1/4" IPS x 1 1/4" CTS | 1 1/4" IPS x 1/2" IPS | 1 1/4" x 3/4" IPS |
| 1 1/4" x 1" IPS | 1 1/4" IPS x 1" CTS | 1 1/4" IPS x 1" CTS | 2" IPS x 1" CTS |
| 2" IPS x 1" IPS | 2" IPS x 1 1/4" CTS | 2" IPS x 1 1/4" CTS | 2" IPS x 1 1/4" IPS |
| 2" IPS x 1 1/2" IPS | 3" IPS x 2" IPS | 4" IPS x 2" IPS | 4" IPS x 3" IPS |
|
Service (Branch) Saddle w/ Socket Fusion Outlet[1] |
|||
| 1/2" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1/2" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1 1/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS |
|
Tapping Tee w/ Socket Fusion Outlet[2] |
|||
| 1/2" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1/2" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 3/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS |
| 1" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1 1/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | ||
|
Tapping Tee w/ Socket Fusion Outlet[3] |
|||
| 1/2" CTS x 6", 8" IPS | 1/2" IPS x 6", 8" IPS | 3/4" IPS x 6", 8" IPS | 1" CTS x 6", 8" IPS |
| 1" IPS x 6", 8" IPS | 1 1/4" IPS x 4", 6", 8" IPS | ||
|
Tee§ |
|||
| 1/2" CTS (SDR 7.0) | |||
|
Tee |
|||
| 1/2", 1" CTS | |||
|
Tee§ |
|||
| 3/4" IPS (SDR 11) | |||
|
Tee |
|||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | |||
|
Tee§ |
|||
| 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) | 1 1/2" IPS (SDR11) | 2" IPS (SDR 11) |
| 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) | ||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Standard Chimney Flat Gasket (1.50" or 1.88" cutter) [1] Outlet x Base Size. [2] Standard Body (1/4", 1/2", 0.8", or 1" cutter) Outlet x Base. [3] Extended Body (1/4", 1/2", or 0.8" cutter) Outlet x Base $ Nominal sizes shown are in inches; unless otherwise indicated, IPS fittings may be SDR 11 or SDR 13.5, except for the 1 1/4" IPS size which is SDR 10. * Gas pipe and tubing limited to outside underground use only. |
|||
Butt Fusion Fittings$ * |
PE 2406/2708 |
Driscoplex® 6500 |
ASTM D2513 |
|
45 Degree Elbow |
|||
| 3", 4", 6", 8" IPS SDR 11 | 4", 6", 8" IPS SDR 13.5 | ||
|
45° Elbow§ |
|||
| 6" IPS (SDR 11) | |||
|
90 Degree Elbow |
|||
| 3/4" IPS SDR 11 | 1 1/2, 2", 3", 4", 6", 8" IPS SDR 11 | 1 1/4" IPS SDR 10, 11 | 1" IPS SDR 11 |
| 3", 4", 6", 8" IPS SDR 13.5 | |||
|
90° Ell§ |
|||
| 1" IPS (SDR 11) | 1 1/2" IPS (SDR 11) | 2" IPS (SDR 11) | 3" IPS (SDR 11.5) |
| 4" IPS (SDR 11.5) | 6" IPS (SDR 11) | ||
|
Branch Saddle Rectangular Base Butt Outlet x Base |
|||
| 2" IPS SDR 11 x 2", 4", 6" | |||
|
Branch Saddle Rectangular Base Butt Outlet x Base |
|||
| 1" IPS SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 2" IPS SDR 11 x 4", 6", 8" IPS | 4" IPS SDR 11 x 6", 8" IPS | |
|
Branch Saddle Round Base Butt Outlet x Base |
|||
| 2" IPS SDR 11 x 4", 6", 8" IPS | 3" IPS SDR 11 x 4", 6", 8" IPS | 4" IPS SDR 11 x 6", 8" IPS | |
|
End Cap§ |
|||
| 1" IPS (SDR 11) | |||
|
End Cap |
|||
| 1/2" CTS HP Service (0.090" Wall) | 3/4" IPS SDR 11 | ||
|
End Cap§ |
|||
| 2" IPS (SDR 11) | 3" IPS (SDR 11.5) | ||
|
End Cap |
|||
| 1" IPS SDR 11 | |||
|
End Cap§ |
|||
| 4" IPS (SDR 11.5) | |||
|
End Cap |
|||
| 1 1/4" IPS SDR 10, SDR 11 | |||
|
End Cap§ |
|||
| 6" IPS (SDR 11) | |||
|
End Cap |
|||
| 1 1/2" IPS SDR 11 | 2", 3", 4", 6", 8" IPS SDR 11 | 3", 4", 6", 8" IPS SDR 13.5 | |
|
High Volume Tapping Tee w/ Butt Outlet[4] |
|||
| 2" SDR 11 x 4", 6", 8" IPS | |||
|
High Volume Tapping Tee w/ Butt Outlet[6] |
|||
| 2" IPS SDR 11 x 2", 3", 4", 6", 8" IPS | |||
|
Purge Cap |
|||
| 2", 3", 4", 6", 8" | |||
|
Purge Point |
|||
| 1 1/4" IPS SDR 10 | 2" IPS SDR 11 | ||
|
Reducer |
|||
| 3/4" IPS SDR 11 x 1/2" CTS (0.090" Wall) | |||
|
Reducer§ |
|||
| 3" IPS x 2" IPS | 4" IPS x 2" IPS | ||
|
Reducer |
|||
| 1" IPS SDR 11 x 1/2" CTS (0.090" Wall) | 1" IPS SDR 11 x 3/4" IPS SDR 11 | ||
|
Reducer§ |
|||
| 4" IPS x 3" IPS | 6" IPS x 4" IPS | ||
|
Reducer |
|||
| 1" IPS SDR 11 x 3/4" CTS (0.090" Wall) | 1 1/4" IPS SDR 10 x 1" IPS SDR 11 | 1 1/4" IPS SDR 10 x 1" IPS SDR 11 | 1 1/4" IPS SDR 11 x 1" IPS SDR 11 |
| 1 1/2" IPS SDR 11 x 3/4" IPS SDR 11 | 1 1/2" IPS SDR 11 x 1" IPS SDR 11 | 2" IPS SDR 11 x 1" IPS SDR 11 | 2" IPS SDR 11 x 1 1/4" IPS SDR 10 |
| 2" IPS SDR 11 x 1 1/2" IPS SDR 11 | 3" IPS SDR 11 x 2" IPS SDR 11 | 3" IPS SDR 13.5 x 2" IPS SDR 11 | 4" IPS SDR 11 x 2" IPS SDR 11 |
| 4" IPS SDR 13.5 x 2" IPS SDR 11 | 4" IPS SDR 11 x 3"" IPS SDR 11 | 4" IPS SDR 13.5 x 3"" IPS SDR 13.5 | 6" IPS SDR 11 x 4" IPS SDR 11 |
| 6" IPS SDR 13.5 x 4" IPS SDR 13.5 | 8" IPS SDR 11 x 6" IPS SDR 11 | 8" IPS SDR 13.5 x 6" IPS SDR 13.5 | 8" IPS SDR 13.5 x 6" IPS SDR 11 |
| 8" IPS SDR 13.5 x 6" IPS SDR 11.5 | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 1/2" CTS HP Service (0.090" wall) x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 1/2" CTS HP Service (0.090" wall) x 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 3/4" IPS SDR 11 x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 3/4" IPS SDR 11 x 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 1" SDR 11 x 1 1/4", 2", 3", 4", 6", 8" IPS; 1 1/4" SDR 10 x 3"" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 1" IPS SDR 11 x 6", 8" IPS | |||
|
Tapping Tees w/ Butt Outlet Round Base[2] |
|||
| 1/2" CTS 0.090" Wall x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 3/4" SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 1" SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | |
|
Tee§ |
|||
| 1 1/2" IPS (SDR 11) | |||
|
Tee |
|||
| 1/2" CTS HP Service (0.090" Wall) | |||
|
Tee§ |
|||
| 2" IPS (SDR 11) | |||
|
Tee |
|||
| 3/4" IPS SDR 11 | |||
|
Tee§ |
|||
| 3" IPS (SDR 11.5) | |||
|
Tee |
|||
| 1" IPS SDR 11 | 1 1/4" IPS SDR 10, SDR 11 | ||
|
Tee§ |
|||
| 4" IPS (SDR 11.5) | 6" IPS (SDR 11) | ||
|
Tee |
|||
| 1 1/2", 2", 3", 4", 6", 8" IPS SDR 11 | 3", 4", 6", 8" IPS SDR 13.5 | ||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Standard Chimney Flat Gasket (1.50" or 1.88" cutter) [6] Extended Chimney w/ Flat Gasket (1.50 or 1.88" cutter) Outlet x base [2] Standard Body (1/4", 1/2", 0.8", or 1" cutter) Outlet x Base. [3] Extended Body (1/4", 1/2", or 0.8" cutter) Outlet x Base $ Nominal sizes shown are in inches; unless otherwise indicated, IPS fittings may be SDR 11 or SDR 13.5, except for the 1 1/4" IPS size which is SDR 10. * Gas pipe and tubing limited to outside underground use only. |
|||
Socket Fittings$ * |
PE 2406/2708 |
Driscoplex® 6500 |
ASTM D2683 |
|
90 Degree Elbow |
|||
| 1/2", 1" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
90° Ell§ |
|||
| 1/2" CTS (SDR 7.0) | 3/4" IPS (SDR 11) | 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) |
| 1 1/2" IPS (SDR 11) | 2" IPS (SDR 11) | 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) |
|
Coupling§ |
|||
| 1/2" CTS (SDR 7.0) | |||
|
Coupling |
|||
| 1/2", 3/4", 1", 1 1/4" CTS | |||
|
Coupling§ |
|||
| 3/4" IPS (SDR 11) | |||
|
Coupling |
|||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | |||
|
Coupling§ |
|||
| 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) | 1 1/2" IPS (SDR11) | 2" IPS (SDR 11) |
| 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) | ||
|
End Cap§ |
|||
| 1/2" CTS (SDR 7.0) | |||
|
End Cap |
|||
| 1/2", 1", 1 1/4" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
End Cap§ |
|||
| 3/4" IPS (SDR 11) | 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) | 2" IPS (SDR 11) |
| 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) | ||
|
High Volume Socket Outlet Tapping Tee[4] |
|||
| 1 1/4" IPS x 2", 3", 4", 6", 8" IPS | |||
|
Purge Cap (w/ 1/2" CTS outlet) |
|||
| 1 1/4", 2", 3", 4" IPS | |||
|
Reducer§ |
|||
| 1/2" CTS x 3/4" IPS | 3/4" IPS x 1 1/4" IPS | 1" IPS x 3/4" IPS | 1" IPS x 1 1/4" IPS |
| 1 1/2" IPS x 1 1/4" IPS | 2" IPS x 1 1/4" IPS | 2" IPS x 1 1/2" IPS | 3" IPS x 2" IPS |
| 4" IPS x 3" IPS | |||
|
Reducer Coupling |
|||
| 1/2" IPS x 1/2" CTS | 3/4" CTS x 1/2" CTS | 3/4" IPS x 1/2" CTS | 3/4" IPS x 1/2" IPS |
| 1" CTS x 1/2" CTS | 1" IPS x 1/2" CTS | 1" IPS x 1/2" IPS | 1" CTS x 1/2" IPS |
| 1" CTS x 3/4" IPS | 1" IPS x 3/4" CTS | 1" IPS x 3/4" IPS | 1" IPS x 1" CTS |
| 1 1/4" IPS x 1/2" IPS | 1 1/4 x 3/4" IPS | 1 1/4" IPS x 1" CTS | 1 1/4" IPS x 1" CTS |
| 1 1/4 x 1" IPS | 1 1/4" IPS x 1 1/4" CTS | 1 1/2" IPS x 1 1/4" IPS | 2" IPS x 1" CTS |
| 2" IPS x 1" IPS | 2" IPS x 1 1/2" IPS | 2" IPS x 1 1/4" CTS | 2" IPS x 1 1/4" CTS |
| 2" IPS x 1 1/4" IPS | 4" IPS x 2" IPS | 4" IPS x 3" IPS | |
|
Service (Branch) Saddle w/ Socket[7] |
|||
| 1/2" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1/2" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1 1/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS |
|
Tapping Tee w/ Socket Fusion Outlet[3] |
|||
| 1 1/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1/2" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 3/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS |
| 1/2" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | ||
|
Tapping Tee w/ Socket Fusion Outlet[2] |
|||
| 1/2" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1/2" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 3/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS |
| 1" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1 1/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | ||
|
Tee |
|||
| 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | 1/2", 1" CTS | ||
|
Tee§ |
|||
| 1/2" CTS (SDR 7.0) | 3/4" IPS (SDR 11) | 1" IPS (SDR 11) | 1 1/4" IPS (SDR 10) |
| 1 1/2" IPS (SDR11) | 2" IPS (SDR 11) | 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) |
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Standard Chimney Flat Gasket (1.50" or 1.88" cutter) [7] Fusion Outlet (Outlet x Base Size). [3] Extended Body (1/4", 1/2", or 0.8" cutter) Outlet x Base [2] Standard Body (1/4", 1/2", 0.8", or 1" cutter) Outlet x Base. $ Nominal sizes shown are in inches; unless otherwise indicated, IPS fittings may be SDR 11 or SDR 13.5, except for the 1 1/4" IPS size which is SDR 10. * Gas pipe and tubing limited to outside underground use only. |
|||
Butt Fusion Fittings$ * |
PE 2406/2708 |
Driscoplex® 6500 |
ASTM D3261 |
|
45 Degree Elbow |
|||
| 3", 4", 6", 8" IPS SDR 11 | 4", 6", 8" IPS SDR 13.5 | ||
|
45° Elbow§ |
|||
| 6" IPS (SDR 11) | |||
|
90 Degree Elbow |
|||
| 3/4" IPS SDR 11 | 1" IPS SDR 11 | 1 1/2", 2", 3", 4", 6", 8" IPS SDR 11 | 1 1/4" IPS SDR 10, 11 |
| 3", 4", 6", 8" IPS SDR 13.5 | |||
|
90° Ell§ |
|||
| 1" IPS (SDR 11) | 1 1/2" IPS (SDR 11) | 2" IPS (SDR 11) | 3" IPS (SDR 11.5) |
| 4" IPS (SDR 11.5) | 6" IPS (SDR 11) | ||
|
Branch Saddle Rectangular Base Butt Outlet x Base |
|||
| 2" IPS SDR 11 x 2", 4", 6" | |||
|
Branch Saddle Rectangular Base Butt Outlet x Base |
|||
| 1" IPS SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 2" IPS SDR 11 x 4", 6", 8" IPS | 4" IPS SDR 11 x 6", 8" IPS | |
|
Branch Saddle Round Base Butt Outlet x Base |
|||
| 2" IPS SDR 11 x 4", 6", 8" IPS | 3" IPS SDR 11 x 4", 6", 8" IPS | 4" IPS SDR 11 x 6", 8" IPS | |
|
End Cap |
|||
| 1/2" CTS HP Service (0.090" Wall) | |||
|
End Cap§ |
|||
| 1" IPS (SDR 11) | 2" IPS (SDR 11) | ||
|
End Cap |
|||
| 3/4" IPS SDR 11 | |||
|
End Cap§ |
|||
| 3" IPS (SDR 11.5) | |||
|
End Cap |
|||
| 1" IPS SDR 11 | |||
|
End Cap§ |
|||
| 4" IPS (SDR 11.5) | |||
|
End Cap |
|||
| 1 1/4" IPS SDR 10, SDR 11 | |||
|
End Cap§ |
|||
| 6" IPS (SDR 11) | |||
|
End Cap |
|||
| 1 1/2" IPS SDR 11 | 2, 3, 4, 6, 8" IPS SDR 11 | 3, 4, 6, 8" IPS SDR 13.5 | |
|
High Volume Tapping Tee w/ Butt Outlet[4] |
|||
| 2" SDR 11 x 4", 6", 8" IPS | |||
|
High Volume Tapping Tee w/ Butt Outlet[6] |
|||
| 2" IPS SDR 11 x 2", 3", 4", 6", 8" IPS | |||
|
Purge Cap[5] |
|||
| 2", 3", 4", 6", 8" | |||
|
Purge Point |
|||
| 1 1/4" IPS SDR 10 | 2" IPS SDR 11 | ||
|
Reducer§ |
|||
| 3" IPS x 2" IPS | |||
|
Reducer |
|||
| 3/4" IPS SDR 11 x 1/2" CTS (0.090" Wall) | 1" IPS SDR 11 x 1/2" CTS (0.090" Wall) | ||
|
Reducer§ |
|||
| 4" IPS x 2" IPS | 4" IPS x 3" IPS | ||
|
Reducer |
|||
| 1" IPS SDR 11 x 3/4" CTS (0.090" Wall) | 1" IPS SDR 11 x 3/4" IPS SDR 11 | ||
|
Reducer§ |
|||
| 6" IPS x 4" IPS | |||
|
Reducer |
|||
| 1 1/4" IPS SDR 10 x 1" IPS SDR 11 | 1 1/4" IPS SDR 10 x 1" IPS SDR 11 | 1 1/4" IPS SDR 11 x 1" IPS SDR 11 | 1 1/2" IPS SDR 11 x 3/4" IPS SDR 11 |
| 1 1/2" IPS SDR 11 x 1" IPS SDR 11 | 2" IPS SDR 11 x 1" IPS SDR 11 | 2" IPS SDR 11 x 1 1/4" IPS SDR 10 | 2" IPS SDR 11 x 1 1/2" IPS SDR 11 |
| 3" IPS SDR 11 x 2" IPS SDR 11 | 3" IPS SDR 13.5 x 2" IPS SDR 11 | 4" IPS SDR 11 x 2" IPS SDR 11 | 4" IPS SDR 13.5 x 2" IPS SDR 11 |
| 4" IPS SDR 11 x 3" IPS SDR 11 | 4" IPS SDR 13.5 x 3" IPS SDR 13.5 | 6" IPS SDR 11 x 4" IPS SDR 11 | 6" IPS SDR 13.5 x 4" IPS SDR 13.5 |
| 8" IPS SDR 11 x 6" IPS SDR 11 | 8" IPS SDR 13.5 x 6" IPS SDR 11 | 8" IPS SDR 13.5 x 6" IPS SDR 11.5 | 8" IPS SDR 13.5 x 6" IPS SDR 13.5 |
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 1/2" CTS HP Service (0.090" wall) x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 1/2" CTS HP Service (0.090" wall) x 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 3/4" IPS SDR 11 x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 3/4" IPS SDR 11 x 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 1" SDR 11 x 1 1/4", 2", 3", 4", 6", 8" IPS; 1 1/4" SDR 10 x 3" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 1" IPS SDR 11 x 6", 8" IPS | |||
|
Tapping Tees w/ Butt Outlet Round Base[2] |
|||
| 1/2" CTS 0.090" Wall x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 3/4" SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 1" SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | |
|
Tee§ |
|||
| 1 1/2" IPS (SDR 11) | |||
|
Tee |
|||
| 1/2" CTS HP Service (0.090" Wall) | |||
|
Tee§ |
|||
| 2" IPS (SDR 11) | |||
|
Tee |
|||
| 3/4" IPS SDR 11 | 1" IPS SDR 11 | ||
|
Tee§ |
|||
| 3" IPS (SDR 11.5) | 4" IPS (SDR 11.5) | ||
|
Tee |
|||
| 1 1/4" IPS SDR 10, SDR 11 | |||
|
Tee§ |
|||
| 6" IPS (SDR 11) | |||
|
Tee |
|||
| 1 1/2", 2", 3", 4", 6", 8" IPS SDR 11 | 3", 4", 6", 8" IPS SDR 13.5 | ||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. [4] Standard Chimney Flat Gasket (1.50" or 1.88" cutter) [6] Extended Chimney w/ Flat Gasket (1.50 or 1.88" cutter) Outlet x base [5] With 1/2" CTS, 3/4" IPS or 1" CTS socket fusion or pup outlet. [2] Standard Body (1/4", 1/2", 0.8", or 1" cutter) Outlet x Base. [3] Extended Body (1/4", 1/2", or 0.8" cutter) Outlet x Base $ Nominal sizes shown are in inches; unless otherwise indicated, IPS fittings may be SDR 11 or SDR 13.5, except for the 1 1/4" IPS size which is SDR 10. * Gas pipe and tubing limited to outside underground use only. |
|||
Socket Fittings$ * ¢ |
PE 2406/2708 |
Driscoplex® 6500 |
CSA B137.4 |
|
90 Degree Elbow |
|||
| 1/2", 1" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
Coupling |
|||
| 1/2", 3/4", 1, 1 1/4" CTS | 1/2", 3/4", 1, 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
End Cap |
|||
| 1/2", 1", 1 1/4" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
|
High Volume Socket Outlet Tapping Tee[4] |
|||
| 1 1/4" IPS x 2", 3", 4", 6", 8" IPS | |||
|
Purge Cap (w/ 1/2" CTS outlet) |
|||
| 1 1/4", 2", 3", 4" IPS | |||
|
Reducer Coupling |
|||
| 1/2" IPS x 1/2" CTS | 3/4" CTS x 1/2" CTS | 3/4" IPS x 1/2" CTS | 3/4" IPS x 1/2" IPS |
| 1" CTS x 1/2" CTS | 1" CTS x 1/2" IPS | 1" IPS x 1/2" CTS | 1" IPS x 1/2" IPS |
| 1" CTS x 3/4" IPS | 1" IPS x 3/4" CTS | 1" IPS x 3/4" IPS | 1" IPS x 1" CTS |
| 1 1/4" IPS x 1/2" IPS | 1 1/4" x 3/4" IPS | 1 1/4" IPS x 1 1/4" CTS | 1 1/4" x 1" IPS |
| 1 1/4" IPS x 1" CTS | 1 1/4" IPS x 1" CTS | 1 1/2" IPS x 1 1/4" IPS | 2" IPS x 1 1/4" IPS |
| 2" IPS x 1 1/4" CTS | 2" IPS x 1 1/4" CTS | 2" IPS x 1 1/2" IPS | 2" IPS x 1" CTS |
| 2" IPS x 1" IPS | 3" IPS x 2" IPS | 4" IPS x 2" IPS | 4" IPS x 3" IPS |
|
Service (Branch) Saddle w/ Socket[7] |
|||
| 1/2" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1/2" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1 1/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS |
|
Tapping Tee w/ Socket Fusion Outlet[2] |
|||
| 1/2" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Socket Fusion Outlet[3] |
|||
| 1/2" CTS x 6", 8" IPS | |||
|
Tapping Tee w/ Socket Fusion Outlet[2] |
|||
| 1/2" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Socket Fusion Outlet[3] |
|||
| 1/2" IPS x 6", 8" IPS | |||
|
Tapping Tee w/ Socket Fusion Outlet[2] |
|||
| 3/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Socket Fusion Outlet[3] |
|||
| 3/4" IPS x 6", 8" IPS | |||
|
Tapping Tee w/ Socket Fusion Outlet[2] |
|||
| 1" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Socket Fusion Outlet[3] |
|||
| 1" IPS x 6", 8" IPS | 1" CTS x 6", 8" IPS | ||
|
Tapping Tee w/ Socket Fusion Outlet[2] |
|||
| 1" CTS x 1 1/4", 2", 3", 4", 6", 8" IPS | 1 1/4" IPS x 1 1/4", 2", 3", 4", 6", 8" IPS | ||
|
Tapping Tee w/ Socket Fusion Outlet[3] |
|||
| 1 1/4" IPS x 4", 6", 8" IPS | |||
|
Tee |
|||
| 1/2", 1" CTS | 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4" IPS | ||
[4] Standard Chimney Flat Gasket (1.50" or 1.88" cutter) [7] Fusion Outlet (Outlet x Base Size). [2] Standard Body (1/4", 1/2", 0.8", or 1" cutter) Outlet x Base. [3] Extended Body (1/4", 1/2", or 0.8" cutter) Outlet x Base $ Nominal sizes shown are in inches; unless otherwise indicated, IPS fittings may be SDR 11 or SDR 13.5, except for the 1 1/4" IPS size which is SDR 10. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
Butt Fusion Fittings$ * ¢ |
PE 2406/2708 |
Driscoplex® 6500 |
CSA B137.4 |
|
45 Degree Elbow |
|||
| 3", 4", 6", 8" IPS SDR 11 | 4", 6", 8" IPS SDR 13.5 | ||
|
90 Degree Elbow |
|||
| 3/4" IPS SDR 11 | 1 1/4" IPS SDR 10, 11 | 1 1/2", 2", 3", 4", 6", 8" IPS SDR 11 | 3", 4", 6", 8" IPS SDR 13.5 |
|
90 Degree Ell |
|||
| 1" IPS SDR 11 | |||
|
Branch Saddle Rectangular Base Butt Outlet x Base |
|||
| 2" IPS SDR 11 x 2", 4", 6" | |||
|
Branch Saddle Rectangular Base Butt Outlet x Base |
|||
| 1" IPS SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 2" IPS SDR 11 x 4", 6", 8" IPS | 4" IPS SDR 11 x 6", 8" IPS | |
|
Branch Saddle Round Base Butt Outlet x Base |
|||
| 2" IPS SDR 11 x 4", 6", 8" IPS | 3" IPS SDR 11 x 4", 6", 8" IPS | 4" IPS SDR 11 x 6", 8" IPS | |
|
End Cap |
|||
| 1/2" CTS HP Service (0.090" Wall) | 3/4" IPS SDR 11 | 1" IPS SDR 11 | 1 1/4" IPS SDR 10, SDR 11 |
| 1 1/2" IPS SDR 11 | 2", 3", 4", 6", 8" IPS SDR 11 | 3", 4", 6", 8" IPS SDR 13".5 | |
|
High Volume Tapping Tee w/ Butt Outlet[4] |
|||
| 2" SDR 11 x 4", 6", 8" IPS | |||
|
High Volume Tapping Tee w/ Butt Outlet[6] |
|||
| 2" IPS SDR 11 x 2", 3", 4", 6", 8" IPS | |||
|
Purge Cap[5] |
|||
| 2", 3", 4", 6", 8" | |||
|
Purge Point |
|||
| 1 1/4" IPS SDR 10 | 2" IPS SDR 11 | ||
|
Reducer |
|||
| 3/4" IPS SDR 11 x 1/2" CTS (0.090" Wall) | 1" IPS SDR 11 x 1/2" CTS (0.090" Wall) | 1" IPS SDR 11 x 3/4" CTS (0.090" Wall) | 1" IPS SDR 11 x 3/4" IPS SDR 11 |
| 1 1/4" IPS SDR 10 x 1" IPS SDR 11 | 1 1/4" IPS SDR 10 x 1" IPS SDR 11 | 1 1/4" IPS SDR 11 x 1" IPS SDR 11 | 1 1/2" IPS SDR 11 x 3/4" IPS SDR 11 |
| 1 1/2" IPS SDR 11 x 1" IPS SDR 11 | 2" IPS SDR 11 x 1 1/4" IPS SDR 10 | 2" IPS SDR 11 x 1 1/2" IPS SDR 11 | 2" IPS SDR 11 x 1" IPS SDR 11 |
| 3" IPS SDR 11 x 2" IPS SDR 11 | 3" IPS SDR 13.5 x 2" IPS SDR 11 | 4" IPS SDR 11 x 2" IPS SDR 11 | 4" IPS SDR 13.5 x 2" IPS SDR 11 |
| 4" IPS SDR 11 x 3" IPS SDR 11 | 4" IPS SDR 13.5 x 3" IPS SDR 13.5 | 6" IPS SDR 11 x 4" IPS SDR 11 | 6" IPS SDR 13.5 x 4" IPS SDR 13.5 |
| 8" IPS SDR 11 x 6" IPS SDR 11 | 8" IPS SDR 13.5 x 6" IPS SDR 11 | 8" IPS SDR 13.5 x 6" IPS SDR 11.5 | 8" IPS SDR 13.5 x 6" IPS SDR 13.5 |
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 1/2" CTS HP Service (0.090" wall) x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 1/2" CTS HP Service (0.090" wall) x 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 3/4" IPS SDR 11 x 1 1/4", 2", 3", 4", 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[3] |
|||
| 3/4" IPS SDR 11 x 6", 8" IPS | |||
|
Tapping Tee w/ Butt Outlet Rectangular Base[2] |
|||
| 1" SDR 11 x 1 1/4", 2", 3", 4", 6", 8" IPS; 1 1/4" SDR 10 x 3" IPS | |||
|
Tapping Tees w/ Butt Outlet Round Base[2] |
|||
| 1/2" CTS 0.090" Wall x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 3/4" SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | 1" SDR 11 x 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS | |
|
Tee |
|||
| 1/2" CTS HP Service (0.090" Wall) | 3/4" IPS SDR 11 | 1" IPS SDR 11 | 1 1/4" IPS SDR 10, SDR 11 |
| 1 1/2", 2", 3", 4", 6", 8" IPS SDR 11 | 3", 4", 6", 8" IPS SDR 13.5 | ||
[4] Standard Chimney Flat Gasket (1.50" or 1.88" cutter) [6] Extended Chimney w/ Flat Gasket (1.50 or 1.88" cutter) Outlet x base [5] With 1/2" CTS, 3/4" IPS or 1" CTS socket fusion or pup outlet. [2] Standard Body (1/4", 1/2", 0.8", or 1" cutter) Outlet x Base. [3] Extended Body (1/4", 1/2", or 0.8" cutter) Outlet x Base $ Nominal sizes shown are in inches; unless otherwise indicated, IPS fittings may be SDR 11 or SDR 13.5, except for the 1 1/4" IPS size which is SDR 10. * Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
Facility : Reno, NV
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe% * |
PE 2406/2708 |
Driscoplex® 6500 |
ASTM D2513 |
| 3/4", 1", 1 1/2", 2" DR 11.0§ | |||
|
1/2" CTS |
|||
| 1/2" CTS .090 (W)§ | |||
|
1" CTS |
|||
| 1" CTS .099” (W)§ | |||
|
1" CTS .101 (W)§ |
|||
|
1", 1 1/4" IPS DR 8.8 |
|||
| 1 1/4" IPS DR 10.0§ | |||
|
1 1/4", 3", 4", 6", 8" IPS DR 11.0 |
|||
| 3", 4", 6" IPS DR 11.5§ | |||
|
6", 8" IPS DR 13.5§ |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. |
|||
Pipe* ¢ |
PE 2406/2708 |
Driscoplex® 6500 |
CSA B137.4 |
| 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS DR 11.0 | |||
| 1/2" CTS | |||
| 1" CTS | |||
| 1", 1 1/4" IPS DR 8.8 | |||
| 1 1/4" IPS DR 10.0 | |||
| 6", 8" IPS DR 13.5 | |||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
Facility : Pryor, OK
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe% * |
PE 2406/2708 |
Driscoplex® 6500 |
ASTM D2513 |
| 3/4", 1", 1 1/2", 2" DR 11.0§ | |||
|
1/2" CTS |
|||
| 1/2" CTS .090 (W)§ | |||
|
1" CTS |
|||
| 1" CTS .099” (W)§ | |||
|
1" CTS .101 (W)§ |
|||
|
1", 1 1/4" IPS DR 8.8 |
|||
| 1 1/4" IPS DR 10.0§ | |||
|
1 1/4", 3", 4", 6", 8" IPS DR 11.0 |
|||
| 3", 4", 6" IPS DR 11.5§ | |||
|
6", 8" IPS DR 13.5§ |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. |
|||
Pipe* ¢ |
PE 2406/2708 |
Driscoplex® 6500 |
CSA B137.4 |
| 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS DR 11.0 | |||
| 1/2" CTS | |||
| 1" CTS | |||
| 1", 1 1/4" IPS DR 8.8 | |||
| 1 1/4" IPS DR 10.0 | |||
| 6", 8" IPS DR 13.5 | |||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
Facility : Knoxville, TN
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe% * |
PE 2406/2708 |
Driscoplex® 6500 |
ASTM D2513 |
| 3/4", 1", 1 1/2", 2" DR 11.0§ | |||
|
1/2" CTS |
|||
| 1/2" CTS .090 (W)§ | |||
|
1" CTS |
|||
| 1" CTS .099” (W)§ | |||
|
1" CTS .101 (W)§ |
|||
|
1", 1 1/4" IPS DR 8.8 |
|||
| 1 1/4" IPS DR 10.0§ | |||
|
1 1/4", 3", 4", 6", 8" IPS DR 11.0 |
|||
| 3", 4", 6" IPS DR 11.5§ | |||
|
6", 8" IPS DR 13.5§ |
|||
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. % Only those products identified in Listing are Certified. * Gas pipe and tubing limited to outside underground use only. |
|||
Pipe* ¢ |
PE 2406/2708 |
Driscoplex® 6500 |
CSA B137.4 |
| 3/4", 1", 1 1/4", 1 1/2", 2", 3", 4", 6", 8" IPS DR 11.0 | |||
| 1/2" CTS | |||
| 1" CTS | |||
| 1", 1 1/4" IPS DR 8.8 | |||
| 1 1/4" IPS DR 10.0 | |||
| 6", 8" IPS DR 13.5 | |||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
| Silver-Line Plastics Corporation | |
| 900 Riverside Drive | |
| Asheville, NC 28804 | |
| United States | |
| 828-252-8755 | |
| Visit this company's website |
Facility : Lawton, OK
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* § |
PE 2406 |
Silver-Line |
ASTM D2513 |
| 1/2" CTS SDR 7 | |||
| 1" CTS SDR 11.5 | |||
| 1" CTS SDR 12.5 | |||
| 1/2" IPS SDR 9.33 | |||
| 3/4" IPS SDR 11 | |||
| 1" IPS SDR 11 | |||
| 1 1/4" IPS SDR 10 | |||
| 1 1/4" IPS SDR 11 | |||
| 1 1/2" IPS SDR 11 | |||
| 2" IPS SDR 11 | |||
| 3" IPS SDR 11 | |||
| 4" IPS SDR 11 | |||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Versaprofiles Product Inc. | |
| 130 Aubé Street | |
| Saint-Lazare de Bellechasse, QC G0R 3J0 | |
| Canada | |
| 877-335-7473 | |
| 418-883-2036 |
Facility : Saint-Lazare de Bellechasse, Québec, Canada
Gas Applications - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Pipe* § |
PE 2708 |
Versapipe Gas PE2708 |
ASTM D2513 |
| 3/4" IPS SDR 11 | |||
| 3/4" IPS SDR 13.5 | |||
| 3/4" IPS SDR 17 | |||
| 3/4" IPS SDR 21 | |||
| 1 1/4" IPS SDR 11 | |||
| 1 1/4" IPS SDR 13.5 | |||
| 1 1/4" IPS SDR 17 | |||
| 1 1/4" IPS SDR 21 | |||
| 2" IPS SDR 11 | |||
| 2" IPS SDR 13.5 | |||
| 2" IPS SDR 17 | |||
| 2" IPS SDR 21 | |||
| 4" IPS SDR 11 | |||
| 4" IPS SDR 11.5 | |||
| 4" IPS SDR 13.5 | |||
| 4" IPS SDR 17 | |||
| 4" IPS SDR 19 | |||
| 4" IPS SDR 21 | |||
| 6" IPS SDR 11 | |||
| 6" IPS SDR 13.5 | |||
| 6" IPS SDR 17 | |||
| 6" IPS SDR 21 | |||
| 6" IPS SDR 23.7 | |||
| 6" IPS SDR 26 | |||
| 6" IPS SDR 32.5 | |||
* Gas pipe and tubing limited to outside underground use only. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Pipe* ¢ |
PE 2708 |
Versapipe Gas PE2708 |
CSA B137.4 |
| 3/4" IPS SDR 11 | |||
| 3/4" IPS SDR 13.5 | |||
| 3/4" IPS SDR 17 | |||
| 3/4" IPS SDR 21 | |||
| 1 1/4" IPS SDR 13.5 | |||
| 1 1/4" IPS SDR 11 | |||
| 1 1/4" IPS SDR 17 | |||
| 1 1/4" IPS SDR 21 | |||
| 2" IPS SDR 17 | |||
| 2" IPS SDR 11 | |||
| 2" IPS SDR 21 | |||
| 2" IPS SDR 13.5 | |||
| 4" IPS SDR 11 | |||
| 4" IPS SDR 13.5 | |||
| 4" IPS SDR 17 | |||
| 4" IPS SDR 21 | |||
| 6" IPS SDR 11 | |||
| 6" IPS SDR 13.5 | |||
| 6" IPS SDR 17 | |||
| 6" IPS SDR 21 | |||
* Gas pipe and tubing limited to outside underground use only. ¢ Product is authorized to bear the cNSF and/or the cNSFus Mark. |
|||
Number of matching Manufacturers is 6
Number of matching Products is 721
Processing time was 1 seconds