These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Pools/Listings.asp?Company=0D140&Standard=050&


NSF/ANSI STANDARD 50
Equipment for Swimming Pools, Spas, Hot Tubs
and Other Recreational Water Facilities


 
Ecolab, Inc. 
Ecolab Center
370 North Wabasha Street 
St. Paul, MN 55102-1390 
United States 
651-293-2524

Facility : Norcross, GA

In-Line Electrolytic Chlorinator Process Equipment

In-Line Electrolytic Chlorinators[1]
PURE2.0T[2] [3] PURE2.5M[4] PURE5.0M[5]   

[1] NSF Listed Units are Certified for pool and spa/hot tub end use.
[2] Maximum output at 3500 ppm salt 1.8 lbs/day.
[3] Maximum output at 5000 ppm salt 2.2 lbs/day
[4] Maximum output per day is 2.5 lbs/day.
[5] Maximum output per day is 5.0 lbs/day.



Facility : South Beloit, IL

Flow Through Chemical Feeding Equipment

AquaMinder Acid Diluter[1] [2] [3]
SP3918 93021152      

[1] Certified for Pool and Spa end use.
[2] Listed for use with muriatic acid only.
[3] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.

Pure Comfort Dibromo Feeder[1] [3]
15 lb unit[4] 30 lb unit[5] 50 lb unit[6]   

[1] Certified for Pool and Spa end use.
[3] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[4] Maximum output rate is 1.9 lbs of bromine/hour at 7.5 gpm.
[5] Maximum output rate is 2.9 lbs of bromine/hour at 7.5 gpm.
[6] Maximum output rate is 6.2 lbs of bromine/hour at 7.5 gpm.

Cyanuric Acid Feeder[3] [7] [8]
Solubilizer 3050[9] Solubilizer 3050 2-HI[10]  

[3] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[7] Certified for Pool use only.
[8] Listed for use with Cyanuric Acid only.
[9] Maximum output rate is 2.45 lbs. of cyanuric acid/hour.
[10] Maximum output rate is 6.12 lbs. of cyanuric acid/hour.

Aqua Balance® Flow Through Chlorine Feeder[1] [3]
N-290[11] N-290H[11]  

[1] Certified for Pool and Spa end use.
[3] Follow manufacturer's instructions for the installation and operation of this equipment.
     Any modifications, including the use of chemicals other than those recommended by the
    manufacturer, will void the NSF Certification.
[11] Maximum output rate is 0.47 lb/hr available chlorine at 10 gpm.


Number of matching Manufacturers is 1
Number of matching Products is 12
Processing time was 1 seconds