These NSF Official Listings are current as of Sunday, September 05, 2010 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=Brenntag+Pacific&
NSF/ANSI STANDARD 60
Drinking Water Treatment Chemicals - Health Effects
Drinking Water Treatment Chemicals - Health Effects
| Brenntag Pacific, Inc. | |
| 10747 Patterson Place | |
| Santa Fe Springs, CA 90670 | |
| United States | |
| 323-562-9500 |
Facility : Chandler, AZ
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid 50% | Membrane Cleaner | NA |
| Citric Acid Solution | Membrane Cleaner | NA |
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water should be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride 37-42% | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 20 Be | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Hydrochloric Acid 22 Be | Corrosion & Scale Control pH Adjustment |
50mg/L |
| Muriatic Acid | Corrosion & Scale Control pH Adjustment |
50mg/L |
|
Sodium Bisulfite[3] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 25% | Coagulation & Flocculation | 69mg/L |
| Sodium Bisulfite 40% | Coagulation & Flocculation | 46mg/L |
[3] This product contains sulfite. Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals. The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L).
|
||
|
Sodium Chlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Chlorite 25% | Disinfection & Oxidation | 28mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide 33% | Corrosion & Scale Control pH Adjustment |
152mg/L |
| Sodium Hydroxide 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 66BE | pH Adjustment | 50mg/L |
| Sulfuric Acid 93% | pH Adjustment | 50mg/L |
| Sulfuric Acid 98% | pH Adjustment | 50mg/L |
Facility : Fresno, CA
|
Citric Acid[1] [2] |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid | Membrane Cleaner | NA |
| Citric Acid Solution | Membrane Cleaner | NA |
[1] These products are designed to be used off-line and flushed out prior to using the
system for drinking water, following manufacturer's use instructions.
[2] The pH of the influent and effluent water shuold be monitored to ensure that all traces
of the product have been removed before placing into service.
|
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda Solution, 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda Solution, 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Caustic Soda Solution, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide Solution, 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide Solution, 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide Solution, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide, 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide, 30% | Corrosion & Scale Control pH Adjustment |
165mg/L |
| Sodium Hydroxide, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| Bleach 12.5% | Disinfection & Oxidation | 84mg/L |
| L.A. Chemchlor 12.5% | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
Facility : Richmond, CA
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| AquaPure 3619 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3627 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3628 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3637 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3646 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3655 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3664 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3672 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3673 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3682 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3691 | Corrosion & Scale Control Sequestering |
25mg/L |
|
Ferric Chloride |
||
| Trade Designation | Product Function | Max Use |
| Ferric Chloride | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Liquid | Coagulation & Flocculation | 250mg/L |
| Ferric Chloride Solution | Coagulation & Flocculation | 250mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Fluosilicic Acid | Fluoridation | 6mg/L |
| HFS Acid | Fluoridation | 6mg/L |
| Hydrofluosilicic Acid | Fluoridation | 6mg/L |
|
Monosodium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| AquaPure 3601 | Corrosion & Scale Control Sequestering |
25mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Aquapure Ortho | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid (36% PO4) | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 25% | Antioxidant | 38mg/L |
| Sodium Bisulfite 38% | Antioxidant | 38mg/L |
| Sodium Bisulfite 40% | Antioxidant | 38mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda Solution, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide Solution, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| Bleach 12.5% | Disinfection & Oxidation | 84mg/L |
| L.A. Chemchlor 12.5% | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
Facility : San Pedro, CA
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide Solution | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
Facility : Santa Fe Springs, CA
|
Hydrogen Peroxide[HP] |
||
| Trade Designation | Product Function | Max Use |
| Hydrogen Peroxide, 27.5% | Disinfection & Oxidation | 3.8mg/L |
| Hydrogen Peroxide, 35% | Disinfection & Oxidation | 3mg/L |
| Hydrogen Peroxide, 50% | Disinfection & Oxidation | 2.1mg/L |
[HP] Use of this product shall be followed by chlorination to remove levels of hydrogen
peroxide. Chlorine residuals shall not exceed 4 mg/L, the EPA's proposed maximum
residual level.
|
||
Facility : South Gate, CA
|
Aluminum Sulfate[AL] |
||
| Trade Designation | Product Function | Max Use |
| Aluminum Sulfate | Coagulation & Flocculation | 150mg/L |
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
|
||
|
Ammonium Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ammonium Sulfate 40% | Disinfection & Oxidation | 60mg/L |
| Ammonium Sulfate Solution | Disinfection & Oxidation | 60mg/L |
| Liquid Ammonium Sulfate | Disinfection & Oxidation | 60mg/L |
|
Blended Phosphates |
||
| Trade Designation | Product Function | Max Use |
| AquaPure 3619 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3627 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3628 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3637 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3646 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3655 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3664 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3672 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3673 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3682 | Corrosion & Scale Control Sequestering |
25mg/L |
| AquaPure 3691 | Corrosion & Scale Control Sequestering |
25mg/L |
|
Citric Acid |
||
| Trade Designation | Product Function | Max Use |
| Citric Acid | Membrane Cleaner | NA |
| Citric Acid Solution | Membrane Cleaner | NA |
|
Copper Sulfate[CP] |
||
| Trade Designation | Product Function | Max Use |
| Copper Sulfate Blend 24 | Algicide | 4mg/L |
[CP] The finished drinking water shall be monitored to ensure that levels of copper do
not exceed 1.3 mg/L.
|
||
|
Ferric Sulfate |
||
| Trade Designation | Product Function | Max Use |
| Ferric Sulfate Solution X[2] | Coagulation & Flocculation | 600mg/L |
[2] X denotes percent strength. |
||
|
Hydrochloric Acid |
||
| Trade Designation | Product Function | Max Use |
| Hydrochloric Acid 15% | Corrosion & Scale Control pH Adjustment |
80mg/L |
| Hydrochloric Acid 18% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Hydrochloric Acid 20% | Corrosion & Scale Control pH Adjustment |
63mg/L |
| Hydrochloric Acid 20BE | Corrosion & Scale Control pH Adjustment |
40mg/L |
| Muriatic Acid 15% | Corrosion & Scale Control pH Adjustment |
80mg/L |
| Muriatic Acid 18% | Corrosion & Scale Control pH Adjustment |
70mg/L |
| Muriatic Acid 20% | Corrosion & Scale Control pH Adjustment |
63mg/L |
|
Hydrofluosilicic Acid |
||
| Trade Designation | Product Function | Max Use |
| Fluosilicic Acid | Fluoridation | 6mg/L |
| HFS Acid | Fluoridation | 6mg/L |
| Hydrofluorosilicic Acid 23%-25% | Fluoridation | 6mg/L |
| Hydrofluosilicic Acid | Fluoridation | 6mg/L |
|
Hydroxyethylidene Diphosphonic Acid |
||
| Trade Designation | Product Function | Max Use |
| HEDP | Reverse Osmosis Antiscalant | 10mg/L |
|
Miscellaneous Water Supply Products |
||
| Trade Designation | Product Function | Max Use |
| ATMP | Reverse Osmosis Antiscalant | 10mg/L |
| DEQUEST® 2000 | Reverse Osmosis Antiscalant | 10mg/L |
| DEQUEST® 2010 | Reverse Osmosis Antiscalant | 10mg/L |
| DEQUEST® 2066A | Reverse Osmosis Antiscalant | 10mg/L |
| DETPMPS | Reverse Osmosis Antiscalant | 10mg/L |
|
Monosodium Orthophosphate |
||
| Trade Designation | Product Function | Max Use |
| AquaPure 3601 | Corrosion & Scale Control Sequestering |
25mg/L |
| Monosodium Phosphate | Corrosion & Scale Control Sequestering |
12mg/L |
|
Phosphoric Acid |
||
| Trade Designation | Product Function | Max Use |
| Aquapure Ortho | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid (36% PO4) | Corrosion & Scale Control | 26mg/L |
| Phosphoric Acid 75% | Corrosion & Scale Control | 13mg/L |
|
Sodium Acid Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Acid Pyrophosphate | Corrosion & Scale Control Sequestering |
12mg/L |
|
Sodium Bisulfite[1] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Bisulfite 25% | Antioxidant | 38mg/L |
| Sodium Bisulfite 38% | Antioxidant | 38mg/L |
| Sodium Bisulfite 40% | Antioxidant | 38mg/L |
[1] This product contains sulfite. |
||
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hydroxide Solution, 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide Solution, 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide Solution, 30% | Corrosion & Scale Control pH Adjustment |
167mg/L |
| Sodium Hydroxide Solution, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide, 20% | Corrosion & Scale Control pH Adjustment |
250mg/L |
| Sodium Hydroxide, 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide, 30% | Corrosion & Scale Control pH Adjustment |
167mg/L |
| Sodium Hydroxide, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
|
Sodium Hypochlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| LA Chemchlor | Disinfection & Oxidation Algicide |
84mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
|
Sodium Permanganate[PO] |
||
| Trade Designation | Product Function | Max Use |
| Sodium Permanganate, 20% | Disinfection & Oxidation | 224mg/L |
| Sodium Permanganate, 40% | Disinfection & Oxidation | 112mg/L |
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
|
||
|
Sodium Polyphosphates, Glassy |
||
| Trade Designation | Product Function | Max Use |
| Sodium Hexametaphosphate | Corrosion & Scale Control Sequestering |
12mg/L |
| Sodium Hexametaphosphate 35% | Corrosion & Scale Control Sequestering |
23mg/L |
|
Sodium Tripolyphosphate |
||
| Trade Designation | Product Function | Max Use |
| Sodium Tripolyphosphate | Corrosion & Scale Control Sequestering |
12mg/L |
|
Sulfuric Acid |
||
| Trade Designation | Product Function | Max Use |
| Sulfuric Acid 25% | Corrosion & Scale Control pH Adjustment |
185mg/L |
| Sulfuric Acid 66BE | Corrosion & Scale Control pH Adjustment |
50mg/L |
|
Tetrapotassium Pyrophosphate |
||
| Trade Designation | Product Function | Max Use |
| Tetrapotassium Pyrophosphate | Corrosion & Scale Control Sequestering |
12mg/L |
|
Zinc Chloride[ZN] |
||
| Trade Designation | Product Function | Max Use |
| Zinc Chloride 50% | Corrosion & Scale Control | 6mg/L |
| Zinc Chloride 62.5% | Corrosion & Scale Control | 5mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
|
Zinc Orthophosphate[ZN] |
||
| Trade Designation | Product Function | Max Use |
| LAC-1001-S | Corrosion & Scale Control | 25mg/L |
| LAC-101-C | Corrosion & Scale Control | 25mg/L |
| LAC-101-S | Corrosion & Scale Control | 20mg/L |
| LAC-301-C | Corrosion & Scale Control | 16mg/L |
| LAC-301-S | Corrosion & Scale Control | 25mg/L |
| LAC-501-C | Corrosion & Scale Control | 25mg/L |
| LAC-501-S | Corrosion & Scale Control | 25mg/L |
| LACCO 101C-22 | Corrosion & Scale Control | 16mg/L |
| LACCO 201C | Corrosion & Scale Control | 9mg/L |
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
|
||
Facility : Billings, MT
|
Sodium Hypochlorite[CL] |
||
| Trade Designation | Product Function | Max Use |
| 12.5% Sodium Hypochlorite | Disinfection & Oxidation | 84mg/L |
| Bleach 12.5% | Disinfection & Oxidation | 84mg/L |
| L.A. Chemchlor 12.5% | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite | Disinfection & Oxidation | 84mg/L |
| Sodium Hypochlorite 12.5% | Disinfection & Oxidation | 84mg/L |
[CL] The residual levels of chlorine (hypochlorite ion and hypochlorous acid), chlorine
dioxide, chlorate ion, chloramine and disinfection by-products shall be monitored in the
finished drinking water to ensure compliance to all applicable regulations.
|
||
Facility : Portland, OR
|
Sodium Hydroxide |
||
| Trade Designation | Product Function | Max Use |
| Caustic Soda 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda Solution 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Caustic Soda Solution, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide Solution 25% | Corrosion & Scale Control pH Adjustment |
200mg/L |
| Sodium Hydroxide Solution, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
| Sodium Hydroxide, 50% | Corrosion & Scale Control pH Adjustment |
100mg/L |
Number of matching Manufacturers is 1
Number of matching Products is 152
Processing time was 1 seconds