NSF Certified Products - Public Water Supply System Components

These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=03390&Standard=061&

NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.

Component Hardware Group, Inc.
1890 Swarthmore Avenue
P.O. Box 2020
Lakewood, NJ 08701
United States
800-526-3694
732-363-4700
Visit this company's website

Facility : Lakewood, NJ

Mechanical Plumbing Devices

	Trade Designation
Commercial Faucets
KL33-9xxx-yyy[G] [12]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [12] xxx - represents different spout lengths up to 18". yyy - represents optional mounting kits and alternate handles, aerators, and spout styles.
KL34-1xxx-yyy[G] [12]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [12] xxx - represents different spout lengths up to 18". yyy - represents optional mounting kits and alternate handles, aerators, and spout styles.
KL34-5660-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL34-8xxx-yyy[G] [12]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [12] xxx - represents different spout lengths up to 18". yyy - represents optional mounting kits and alternate handles, aerators, and spout styles.
KL41-20xxVByy[1] [2] [G]

[1] xx - 55 - For Add-on Faucets with spout offset lengths up to 18". [2] yy - For hose lengths of 20", 26", 44", 60", 72" and 96" [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL50-2000 DOUBLE PANTRY UTILITY SPRAY[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL50-2000-VB DOUBLE PANTRY UTILITY SPRAY W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL50-3000 DOUBLE PANTRY POT FILLER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL50-3000-VB DOUBLE PANTRY POT FILLER W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-2000 WALL MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-2000-VB WALL MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-3000 WALL MOUNT POT FILLER 8"[200mm] ADJ. CENTERS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-3000-VB WALL MOUNT POT FILLER 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL56-2000 DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL56-2000-VB DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL56-3000 DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL56-3000-VB DECK MOUNT UTILITY SPRAY 4"[100mm] ADJ. CENTERS W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL60-2000 DECK MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL60-2000-VB DECK MOUNT UTILITY SPRAY 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL60-3000 DECK MOUNT POT FILLER 8"[200mm] ADJ. CENTERS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL60-3000-VB DECK MOUNT POT FILLER 8"[200mm] ADJ. CENTERS W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL63-2000 SINGLE PANTRY UTILITY SPRAY[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL63-2000-VB SINGLE PANTRY UTILITY SPRAY W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL63-3000 SINGLE PANTRY POT FILLER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL63-3000-VB SINGLE PANTRY POT FILLER W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL69-2000 SINGLE WALL MOUNT UTILITY SPRAY[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL69-2000-VB SINGLE WALL MOUNT UTILITY SPRAY W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL69-3000 SINGLE WALL MOUNT POT FILLER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL69-3000-VB SINGLE WALL MOUNT POT FILLER W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL71-2000 WALL MOUNT BASE UTILITY SPRAY[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL71-2000-VB WALL MOUNT BASE UTILITY SPRAY W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL71-3000 WALL MOUNT BASE POT FILLER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL71-3000-VB WALL MOUNT BASE POT FILLER W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL73-2000 DECK MOUNT BASE UTILITY SPRAY[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL73-2000-VB DECK MOUNT BASE UTILITY SPRAY W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL73-3000 DECK MOUNT BASE POT FILLER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL73-3000-VB DECK MOUNT BASE POT FILLER W/ VACUUM BREAKER[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KN70-9xxx-yyy Encore Series Single Wall Mount with KPV-X001 Pot Filler[19]

[19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN76-9xxx-yyy Encore Series Single Wall/Wok Range with KPV-X001 Pot Filler[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
TLL20-1x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL50-1x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL52-9x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL57-1x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL58-4x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL61-1x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL62-8x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL65-9x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL70-1x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
Commercial Kitchen and Bar Endpoint Devices[3]
KL34-5500-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL34-5622-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL34-8014-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL34-8014-PSP[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL50-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL52-9XXX-YYY[G] [10]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [10] Elevated Swing Spout Assemblies follow the format KLnn-X1X2X3X4: nn - 52, 58, 62, or 65 X1 - 9, 4, or 8 X2 - 0 or 1 X3X4 - 06, 08, 10, 12, 14, 16, or 18
KL53-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-5500-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-5555-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-5614-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL53-5622-PS[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL55-7XXX-YYY[G] [11]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [11] ADD-ON Faucets w/ Spout follow the format KL55-70xx xx - 06, 08, 10, 12, 14, 16, or 18
KL56-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL58-4XXX-YYY[G] [10]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [10] Elevated Swing Spout Assemblies follow the format KLnn-X1X2X3X4: nn - 52, 58, 62, or 65 X1 - 9, 4, or 8 X2 - 0 or 1 X3X4 - 06, 08, 10, 12, 14, 16, or 18
KL60-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL62-8XXX-YYY[G] [10]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [10] Elevated Swing Spout Assemblies follow the format KLnn-X1X2X3X4: nn - 52, 58, 62, or 65 X1 - 9, 4, or 8 X2 - 0 or 1 X3X4 - 06, 08, 10, 12, 14, 16, or 18
KL63-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL65-9XXX-YYY[G] [10]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [10] Elevated Swing Spout Assemblies follow the format KLnn-X1X2X3X4: nn - 52, 58, 62, or 65 X1 - 9, 4, or 8 X2 - 0 or 1 X3X4 - 06, 08, 10, 12, 14, 16, or 18
KL69-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL71-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL73-1XXX-YYY[9] [G]

[9] Pre-Rinse Assemblies follow the format KLnn-1x00-yyy: nn - 50, 53, 56, 60, 63, 69, 71, 73 x - 0 or 1 yyy - (Blank), BR, AF1, AF2, AF3, AF4, AF5, AF6, or AF7 [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KN33-9XXX[4]

[4] XXX denotes length of spout up to 28 inches.
KN34-8XXX[4]

[4] XXX denotes length of spout up to 28 inches.
KN50 Encore Series

KN52 Encore Series

KN53 Encore Series

KN56 Encore Series

KN58 Encore Series

KN60 Encore Series

KN62 Encore Series

KN63 Encore Series

KN65 Encore Series

KN69 Encore Series

KN71 Encore Series

KN73 Encore Series

[3] Optional exterior coating SANI-GUARD™.
Connector Hoses[3] [5]
KN50-X025[6]

[6] Items with SANI-GUARD™ antimicrobial treated plastic SG-X022.
KN50-X038

KN50-X127

KN50-X128

KN50-X129

KN50-Y004 Encore Hose Assembly with Grip[6] [7]

[6] Items with SANI-GUARD™ antimicrobial treated plastic SG-X022. [7] Suffix denotes length, which is less than or equal to 24 feet.
KN50-Y010[7]

[7] Suffix denotes length, which is less than or equal to 24 feet.
[3] Optional exterior coating SANI-GUARD™. [5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucet Aerator[3] [5]
	KL50-X120 Aerator
	KL50-X120 Aerator with Saniguard
	KN50-X120 Aerator
	KN50-X120 Aerator with Saniguard
[3] Optional exterior coating SANI-GUARD™. [5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucet Body
KL13-Y001[5] [G]

[5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL20-X001[5] [G]

[5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL41-Y002[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL41-Y003[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL45-Y002[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL45-Y002-GT[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL45-Y002-P[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL45-Y003[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KN13-Y001-YYYY[5] [8]

[5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [8] XXX represents different spout lengths up to 18". YYYY represents optional mounting kits and alternative handles, seater washer, and aerators.
KN20-X001-YYYY[5] [8]

[5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [8] XXX represents different spout lengths up to 18". YYYY represents optional mounting kits and alternative handles, seater washer, and aerators.
KN41-Y002 Encore Deck Mount Faucet Body Assembly 4" Center

KN41-Y003 Encore Deck Mount Faucet Body Assembly 8" Center

KN45-Y002 Encore Wall Mount Faucet Body Assembly 4" Center

KN45-Y002-P Encore Wall Mount 4" Faucet w/ Special Inlets

KN45-Y003 Encore Wall Mount Faucet Body Assembly 8" Center

Faucet Spouts[3] [5]
	KL11-X000 3 1/2" Swivel Gooseneck Spout
	KL11-X000 3 1/2" Swivel Gooseneck Spout with Saniguard
	KL11-X000-3 3 1/2" Swivel Gooseneck Spout, 3" Height
	KL11-X000-3 3 1/2" Swivel Gooseneck Spout, 3" Height with Saniguard
	KL11-X001 8 1/2" Swivel Goosneck Spout
	KL11-X001 8 1/2" Swivel Goosneck Spout with Saniguard
	KL11-X002 6" Swivel Gooseneck Spout
	KL11-X002 6" Swivel Gooseneck Spout with Saniguard
	KL11-X006 6" Swivel Spout
	KL11-X006 6" Swivel Spout with Saniguard
	KL11-X008 8" Swivel Spout
	KL11-X008 8" Swivel Spout with Saniguard
	KL11-X010 10" Swivel Spout
	KL11-X010 10" Swivel Spout with Saniguard
	KL11-X012 12" Swivel Spout
	KL11-X012 12" Swivel Spout with Saniguard
	KL11-X014 14" Swivel Spout
	KL11-X014 14" Swivel Spout with Saniguard
	KL11-X016 16" Swivel Spout
	KL11-X016 16" Swivel Spout with Saniguard
	KL11-X018 18" Double Jointed Spout
	KL11-X018 18" Double Jointed Spout with Saniguard
	KL11-X020 20" Double Jointed Spout
	KL11-X020 20" Double Jointed Spout with Saniguard
	KL11-X022 22" Double Jointed Spout
	KL11-X022 22" Double Jointed Spout with Saniguard
	KL11-X024 24" Double Jointed Spout
	KL11-X024 24" Double Jointed Spout with Saniguard
	KL11-X026 26" Double Jointed Spout
	KL11-X026 26" Double Jointed Spout with Saniguard
	KL11-X028 28" Double Jointed Spout
	KL11-X028 28" Double Jointed Spout with Saniguard
	KL11-X100 3 1/2" Rigid Gooseneck Spout
	KL11-X100 3 1/2" Rigid Gooseneck Spout with Saniguard
	KL11-X101 8 1/2" Rigid Gooseneck Spout
	KL11-X101 8 1/2" Rigid Gooseneck Spout with Saniguard
	KL11-X102 6" Rigid Gooseneck Spout
	KL11-X102 6" Rigid Gooseneck Spout with Saniguard
	KL11-X112 12" Spout Extension
	KL11-X112 12" Spout Extension with Saniguard
	KL11-X801 8" Swivel Arched Cast Spout Assembly[G]
	KL11-X803 8" High Arc Tubular Spout Assembly[G]
	KL11-Y250-G Swing Nozzle Vacuum Breaker w/ 6" Spout[G]
	KL11-Y251-G Swing Nozzle Vacuum Breaker w/ 8" Spout[G]
	KL11-Y252-G Swing Nozzle Vacuum Breaker w/ 12" Spout[G]
	KL11-Y253-G 9" Swivel - Vacuum Breaker w/ 6" Spout[G]
	KL11-Y253-K 9" Rigid Vacuum Breaker w/ 6" Spout[G]
	KL11-Y254-G 9" Swivel - Vacuum Breaker w/ 8" Spout[G]
	KL11-Y254-K 9" Rigid Vacuum Breaker w/ 8" Spout[G]
	KL11-Y255-G 9" Swivel - Vacuum Breaker w/ 12" Spout[G]
	KL11-Y255-K 9" Rigid Vacuum Breaker w/ 12" Spout[G]
	KL11-Y309 9" Swivel Arched Tubular Spout Assembly[G]
	KL11-Y406 6" Horizontal Cast Spout Assembly[G]
	KL11-Y408 8" Horizontal Cast Spout Assembly[G]
	KL11-Y413 13" Cast Double Jointed Swing Spout Assembly[G]
	KL11-Y415 15" Cast Double Jointed Swing Spout Assembly[G]
	KL11-Y418 18" Cast Double Jointed Swing Spout Assembly[G]
	KL11-Y420 20" Cast Double Jointed Swing Spout Assembly[G]
	KL34-Y010 10" Straight Spout[G]
	KL34-Y012 12" Straight Spout[G]
	KL34-Y014 14" Straight Spout[G]
	KL34-Y018 18" Straight Spout[G]
	KL34-Y020 20" Double Jointed Spout[G]
	KL34-Y022 22" Double Jointed Spout[G]
	KL34-Y024 24" Double Jointed Spout[G]
	KL34-Y028 28" Double Jointed Spout[G]
	KL34-Y110 10" Spout Extension[G]
	KN11-X000 3 1/2" Swivel Gooseneck Spout
	KN11-X000 3/12" Swivel Gooseneck Spout with Saniguard
	KN11-X000-3 3 1/2" Swivel Gooseneck Spout, 3" Height
	KN11-X000-3 3 1/2" Swivel Gooseneck Spout, 3" Height with Saniguard
	KN11-X001 8 1/2" Swivel Gooseneck Spout
	KN11-X001 8 1/2" Swivel Gooseneck Spout with Saniguard
	KN11-X002 6" Swivel Gooseneck Spout
	KN11-X002 6" Swivel Gooseneck Spout with Saniguard
	KN11-X006 6" Swivel Spout
	KN11-X006 6" Swivel Spout with Saniguard
	KN11-X008 8" Swivel Spout
	KN11-X008 8" Swivel Spout with Saniguard
	KN11-X010 10" Swivel Spout
	KN11-X010 10" Swivel Spout with Saniguard
	KN11-X012 12" Swivel Spout
	KN11-X012 12" Swivel Spout with Saniguard
	KN11-X014 14" Swivel Spout
	KN11-X014 14" Swivel Spout with Saniguard
	KN11-X016 16" Swivel Spout
	KN11-X016 16" Swivel Spout with Saniguard
	KN11-X018 18" Double Jointed Spout
	KN11-X018 18" Double Jointed Spout with Saniguard
	KN11-X020 20" Double Jointed Spout
	KN11-X020 20" Double Jointed Spout with Saniguard
	KN11-X022 22" Double Jointed Spout
	KN11-X022 22" Double Jointed Spout with Saniguard
	KN11-X024 24" Double Jointed Spout
	KN11-X024 24" Double Jointed Spout with Saniguard
	KN11-X026 26" Double Jointed Spout
	KN11-X026 26" Double Jointed Spout with Saniguard
	KN11-X028 28" Double Jointed Spout
	KN11-X028 28" Double Jointed Spout with Saniguard
	KN11-X100 3 1/2" Rigid Gooseneck Spout
	KN11-X100 3 1/2" Rigid Gooseneck Spout with Saniguard
	KN11-X101 8 1/2" Rigid Gooseneck Spout
	KN11-X101 8 1/2" Rigid Gooseneck Spout with Saniguard
	KN11-X102 6" Rigid Gooseneck Spout
	KN11-X102 6" Rigid Gooseneck Spout with Saniguard
	KN11-X112 12" Spout Extension
	KN11-X112 12" Spout Extension with Saniguard
	KN50-X120
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[3] Optional exterior coating SANI-GUARD™. [5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucet Valve Body
	KN43-4050 Encore Mixing Valve w/ 4" Centers
Faucets
KHL81-4XXX-CYY[G] [16]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [16] Deck Mount Single Lever faucets follow the format KL81-NX1X2X3-CY2Y3, KPL81--NX1X2X3-CY2Y3 or KHL-NX1X2X3-CY2Y3 (N) - 4 or 9 (x1) - 0, 4 or 8 (x2x3) - 05 C (y2) - A, B, C, D or E (y3) - 1, 2 or 3
KHL81-9XXX-CYY[G] [16]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [16] Deck Mount Single Lever faucets follow the format KL81-NX1X2X3-CY2Y3, KPL81--NX1X2X3-CY2Y3 or KHL-NX1X2X3-CY2Y3 (N) - 4 or 9 (x1) - 0, 4 or 8 (x2x3) - 05 C (y2) - A, B, C, D or E (y3) - 1, 2 or 3
KL11-4XXX-YYY 4" Deck Mount Faucet[G] [15]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [15] (X1) - 0 (X2X3) - 00, 01, 02, 05, 06, 08, 10, 12, 14, 16 or 18 (Y1) - R, or S (Y2) - A, B, C, D, E, or F (Y3) - 1, 2, 4, 5, 6, 7, or 8
KL11-8XXX-YYY 8" Deck Mount Faucet[G] [15]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [15] (X1) - 0 (X2X3) - 00, 01, 02, 05, 06, 08, 10, 12, 14, 16 or 18 (Y1) - R, or S (Y2) - A, B, C, D, E, or F (Y3) - 1, 2, 4, 5, 6, 7, or 8
KL13-8XXX-YYY 8" Wall Mount Faucet[G] [15]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [15] (X1) - 0 (X2X3) - 00, 01, 02, 05, 06, 08, 10, 12, 14, 16 or 18 (Y1) - R, or S (Y2) - A, B, C, D, E, or F (Y3) - 1, 2, 4, 5, 6, 7, or 8
KL18-3170 Single Spout Swing Faucet[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL20-8XXX-YYY Single Pantry Faucet[G] [15]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [15] (X1) - 0 (X2X3) - 00, 01, 02, 05, 06, 08, 10, 12, 14, 16 or 18 (Y1) - R, or S (Y2) - A, B, C, D, E, or F (Y3) - 1, 2, 4, 5, 6, 7, or 8
KL22-3100[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL22-3100-SB[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL41-4xxx-yyy[G] [20]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [20] nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KL41-8xxx-yyy[G] [20]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [20] nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KL45-4xxx-yyy[G] [20]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [20] nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KL45-8xxx-yyy[G] [20]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [20] nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KL454xxxyyyGT[G] [20]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [20] nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KL454xxxyyyP[G] [20]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [20] nnn - Faucet series L41 - Encore deck mount faucet L45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Standard Encore® Compression Valve 1 - 1/4 Turn Encore® Ceramic Valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KL51 Encore Series Double Pantry[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL54 Encore Series Wall Mount[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL57 Encore Series 4" Deck Mount[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL61 Encore Series 8" Deck Mount[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL64 Encore Series Single Pantry[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL64 MV Encore Series Single Pantry w/ Mixing Valve[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL67 Encore Series 6" Deck Mount[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL70 Encore Series Single Wall Mount[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL72 Encore Series Wall Mount Spout Base[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL74 Encore Series Deck Mount Spout Base[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL76 Encore Series Wok Range Single Wall Mount[3] [4] [G]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL81-4XXX-CYY[G] [16]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [16] Deck Mount Single Lever faucets follow the format KL81-NX1X2X3-CY2Y3, KPL81--NX1X2X3-CY2Y3 or KHL-NX1X2X3-CY2Y3 (N) - 4 or 9 (x1) - 0, 4 or 8 (x2x3) - 05 C (y2) - A, B, C, D or E (y3) - 1, 2 or 3
KL81-9XXX-CYY[G] [16]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [16] Deck Mount Single Lever faucets follow the format KL81-NX1X2X3-CY2Y3, KPL81--NX1X2X3-CY2Y3 or KHL-NX1X2X3-CY2Y3 (N) - 4 or 9 (x1) - 0, 4 or 8 (x2x3) - 05 C (y2) - A, B, C, D or E (y3) - 1, 2 or 3
KL83-NXXX-YYY[G] [14]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [14] Centerset faucets follow the format KL83-NX1X2X3-Y1Y2Y3, KL85-NX1X2X3-Y1Y2Y3, and KPL85-NX1X2X3-Y1Y2Y3: (N) - 4 (x1) - 0, 1 or 2 (x2x3) - 00, 01, 02, 04, 06, 08, 10 or 12 (y1) - C, R or S (y2) - A, B, C, D, E or F (y3) - Blank, 1, 2, 4, 5, 6, 7, 8 or 9
KL84-NXXX-YYY[G] [21]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [21] nnn - Faucet series L84 - Low-lead widespread faucet with 8" bent riser spout and handles L86 - Low-lead widespread faucet with 6" or 8" swivel cast spout and handles (w/No Pop-Up or Pop-Up Hole[PL86]) X1 – Inlet 1 - 3"- 12" adjustable hose single valve with 1/2" NPSM inlets 8 - 5"- 24" adjustable hose with 1/2" NPSM inlets X2 – Valve 0 - 1/4 turn standard Encore® compression valves 1 - 1/4 turn Encore® veramic valve w/ in-line check valves 2 - Self-closing adjustable metering valves X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX serated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" Wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KL85-NXXX-YYY[G] [14]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [14] Centerset faucets follow the format KL83-NX1X2X3-Y1Y2Y3, KL85-NX1X2X3-Y1Y2Y3, and KPL85-NX1X2X3-Y1Y2Y3: (N) - 4 (x1) - 0, 1 or 2 (x2x3) - 00, 01, 02, 04, 06, 08, 10 or 12 (y1) - C, R or S (y2) - A, B, C, D, E or F (y3) - Blank, 1, 2, 4, 5, 6, 7, 8 or 9
KL86-NXXX-YYY[G] [21]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [21] nnn - Faucet series L84 - Low-lead widespread faucet with 8" bent riser spout and handles L86 - Low-lead widespread faucet with 6" or 8" swivel cast spout and handles (w/No Pop-Up or Pop-Up Hole[PL86]) X1 – Inlet 1 - 3"- 12" adjustable hose single valve with 1/2" NPSM inlets 8 - 5"- 24" adjustable hose with 1/2" NPSM inlets X2 – Valve 0 - 1/4 turn standard Encore® compression valves 1 - 1/4 turn Encore® veramic valve w/ in-line check valves 2 - Self-closing adjustable metering valves X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX serated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" Wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN13-8XXX-YYYY Top Line Wall Mount Faucet[8]

[8] XXX represents different spout lengths up to 18". YYYY represents optional mounting kits and alternative handles, seater washer, and aerators.
KN20-8XXX-YYYY[8]

[8] XXX represents different spout lengths up to 18". YYYY represents optional mounting kits and alternative handles, seater washer, and aerators.
KN41-4XXX-YYYY Encore Deck Mount Faucet 4" Center w/ Spout[18]

[18] nnn - Faucet series N41 - Encore deck mount faucet N43 - Encore mixing valve N45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 turn standard Encore® compression valve 1 - 1/4 turn Encore® ceramic valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN41-8XXX-YYYY Encore Deck Mount Faucet 8" Center w/ Spout[18]

[18] nnn - Faucet series N41 - Encore deck mount faucet N43 - Encore mixing valve N45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 turn standard Encore® compression valve 1 - 1/4 turn Encore® ceramic valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN45-4XXX-YYYY Encore Wall Mount Faucet 4" Center w/ Spout[18]

[18] nnn - Faucet series N41 - Encore deck mount faucet N43 - Encore mixing valve N45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 turn standard Encore® compression valve 1 - 1/4 turn Encore® ceramic valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN45-8XXX-YYYY Encore Wall Mount Faucet 8" Center w/ Spout[18]

[18] nnn - Faucet series N41 - Encore deck mount faucet N43 - Encore mixing valve N45 - Encore wall mount faucet X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets X2 – Valve 0 - 1/4 turn standard Encore® compression valve 1 - 1/4 turn Encore® ceramic valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN51-9xxx-yyy Encore Series Double Pantry[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN53-8xxx-yyy Encore Series Wall Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN54-6xxx-yyy Encore Series 6'' Wall Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN54-8xxx-yyy Encore Series Wall Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN57-4xxx-yyy Encore Series 4'' Deck Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN61-8xxx-yyy Encore Series 8'' Deck Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN64-9xxx-yyy Encore Series Single Pantry[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN64-9xxx-yyy MV Encore Series Single Pantry w/ Mixing Valve[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN67-6xxx-yyy Encore Series 6'' Deck Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN70-9xxx-yyy Encore Series Single Wall Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN72-9xxx-yyy Encore Series Wall Mount Spout Base[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN74-9xxx-yyy Encore Series Deck Mount Spout Base[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN76-9xxx-yyy Encore Series Wok Range Single Wall Mount[3] [19]

[3] Optional exterior coating SANI-GUARD™. [19] nnn - Faucet series (N51, N53, N54, N57, N61 etc.) X1 – Inlet 4 - 4" c/c with 1/2" NPSM inlets 6 - 6" c/c with 1/2" NPSM inlets 8 - 8" c/c with 1/2" NPSM inlets 9 - Single hole mount with 1/2" NPSM inlets X2 – Valve 0 - 1/4 Turn Encore® ceramic valve w/ in-line check valve X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6” straight spout 08 - 8” straight spout 09 - 9” tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13” double jointed spout 14 - 14" straight spout 16 - 16" straight spout 18 - 18” double jointed spout 20 - 20" double jointed spout 22 - 22" double jointed spout 24 - 24" double jointed spout 26 - 26" double jointed spout 28 - 28" double jointed spout 50 - 6" spout 3/8” NPT x 2" riser 51 - 8" spout 3/8” NPT x 2" riser 52 - 12" spout 3/8” NPT x 2" riser 53 - 6" spout 3/8” NPT x 9" riser 54 - 8" spout 3/8” NPT x 9" riser 56 - 12" spout 3/8” NPT x 9" riser Y1 – Spout Style A - Swivel arched cast spout B - Swivel bent riser tubular spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT Outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - swivel subular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX aerated stream F - 2.2 GPM MAX aerated stream vandal resistant P - Pot filler assembly R - 3/8" Threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KN81-4405-CE2 5" Single Lever Faucet[3] [4]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches.
KN81-9005-CE2 5" Single Lever Faucet[3] [4]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches.
KN83 Encore Series[3] [4]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches.
KN84 Encore Series[3] [4]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches.
KN85 Encore Series[3] [4]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches.
KN86 Encore Series[3] [4]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches.
KPL81-4XXX-CYY[G] [16]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [16] Deck Mount Single Lever faucets follow the format KL81-NX1X2X3-CY2Y3, KPL81--NX1X2X3-CY2Y3 or KHL-NX1X2X3-CY2Y3 (N) - 4 or 9 (x1) - 0, 4 or 8 (x2x3) - 05 C (y2) - A, B, C, D or E (y3) - 1, 2 or 3
KPL81-9XXX-CYY[G] [16]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [16] Deck Mount Single Lever faucets follow the format KL81-NX1X2X3-CY2Y3, KPL81--NX1X2X3-CY2Y3 or KHL-NX1X2X3-CY2Y3 (N) - 4 or 9 (x1) - 0, 4 or 8 (x2x3) - 05 C (y2) - A, B, C, D or E (y3) - 1, 2 or 3
KPL85-NXXX-YYY[G] [14]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [14] Centerset faucets follow the format KL83-NX1X2X3-Y1Y2Y3, KL85-NX1X2X3-Y1Y2Y3, and KPL85-NX1X2X3-Y1Y2Y3: (N) - 4 (x1) - 0, 1 or 2 (x2x3) - 00, 01, 02, 04, 06, 08, 10 or 12 (y1) - C, R or S (y2) - A, B, C, D, E or F (y3) - Blank, 1, 2, 4, 5, 6, 7, 8 or 9
KPL86-NXXX-YYY[G] [13]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [13] Widespread faucets follow the format KL84-NX1X2X3-Y1Y2Y3, KL86-NX1X2X3-Y1Y2Y3, and KPL86-NX1X2X3-Y1Y2Y3: (N) - 1 or 8 (X1) - 0 (X2X3) - 00, 01, 02, 05, 06, 08, 10, or 12 (Y1) - C, R, or S (Y2) - A, B, C, D, E, or F (Y3) - Blank, 1, 2, 3, 4, 5, 6, 7, 8, or 9
KPL86-NXXX-YYY[G] [21]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [21] nnn - Faucet series L84 - Low-lead widespread faucet with 8" bent riser spout and handles L86 - Low-lead widespread faucet with 6" or 8" swivel cast spout and handles (w/No Pop-Up or Pop-Up Hole[PL86]) X1 – Inlet 1 - 3"- 12" adjustable hose single valve with 1/2" NPSM inlets 8 - 5"- 24" adjustable hose with 1/2" NPSM inlets X2 – Valve 0 - 1/4 turn standard Encore® compression valves 1 - 1/4 turn Encore® veramic valve w/ in-line check valves 2 - Self-closing adjustable metering valves X3X4 – Spout 00 - 3 1/2" gooseneck spout 01 - 8 1/2" gooseneck spout 02 - 6" gooseneck spout 05 - 5" straight cast spout 06 - 6" straight spout 08 - 8" straight spout 09 - 9" tubular spout 10 - 10" straight spout 12 - 12" straight spout 13 - 13" double jointed spout 18 - 18" double jointed spout 50 - 6" spout 3/8" NPT x 2" riser 51 - 8" spout 3/8" NPT x 2" riser 52 - 12" spout 3/8" NPT x 2" riser 53 - 6" spout 3/8" NPT x 9" riser 54 - 8" spout 3/8" NPT x 9" riser 56 - 12" spout 3/8" NPT x 9" riser Y1 – Spout style A - Swivel arched cast spout B - Swivel bent riser tubular spout C - Cast spout D - Double jointed cast spout G - Vacuum breaker w/ swivel riser & tubular spout 3/8" NPT outlet K - Vacuum breaker w/ rigid riser & tubular spout 3/8" NPT outlet R - Rigid tubular spout S - Swivel tubular spout T - Swivel cast spout Y2 – Aerator A - 0.5 GPM PCA spray vandal resistant B - 1.5 GPM MAX laminar vandal resistant C - 0.5 GPM PCA spray D - 1.5 GPM MAX laminar E - 2.2 GPM MAX serated stream F - 2.2 GPM MAX aerated stream vandal resistant R - 3/8" threaded aerator (spout styles G and K only) T - Serrated tip for hose (spout styles G and K only) Y3 – Handle 1 - Standard Encore® lever 2 - Cross 4 - 4" Wrist blade 5 - Standard lever w/ tamper proof screw 6 - 6" wrist blade 7 - 4" wrist blade w/ tamper proof screw 8 - 6" wrist blade w/ tamper proof screw
KPV-X001 Pot Filler[3] [4]

[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches.
TLL20 9x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL50-9x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL57-4x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL61-8x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
TLL70-9x1x2x3-y1y2y3 Top Lines Series[G] [17]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. [17] Top Lines faucets follow the format TLLXX-Nx1x2x3-y1y2y3: (N) INLET - 1, 2, 8, or 9 (x1) - 0 (x2x3) - 00, 01, 02, 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, or 28 (y1) - R or S (y2) - A, B, C, D, E, or F (y3) - 1 or 5
Flexible Plumbing Connectors[G]
KL50-Y004-20 Pre-Rinse Hose Assembly w/ Grip

KL50-Y004-20U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters

KL50-Y004-26 Pre-Rinse Hose Assembly w/ Grip

KL50-Y004-26U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters

KL50-Y004-44 Pre-Rinse Hose Assembly w/ Grip

KL50-Y004-44U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters

KL50-Y004-60 Pre-Rinse Hose Assembly w/ Grip

KL50-Y004-60U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters

KL50-Y004-72 Pre-Rinse Hose Assembly w/ Grip

KL50-Y004-72U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters

KL50-Y004-96 Pre-Rinse Hose Assembly w/ Grip

KL50-Y004-96U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters

KL50-Y010-20 20" Pre-Rinse Hose (No Grip)

KL50-Y010-26 26" Pre-Rinse Hose (No Grip)

KL50-Y010-44 44" Pre-Rinse Hose (No Grip)

KL50-Y010-60 60" Pre-Rinse Hose (No Grip)

KL50-Y010-96 96" Pre-Rinse Hose (No Grip)

Kl50-Y010-72 72" Pre-Rinse Hose (No Grip)

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Glass Fillers[3] [G]
	KL26-5000
	KL26-5000-SP2
	KL26-5001
	KL26-5012
	KL26-5012-SP
	KL26-5014
	KL26-5015-SP
[3] Optional exterior coating SANI-GUARD™. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Miscellaneous Faucet Components
	KL11-0010 Repair Kit[5] [G]
	KL11-Y204 Adapter, Serrated Spout Outlet[G]
	KL11-Y208 Serrated Spout Outlet Assembly[G]
	KL11-Y507 7" Cast Extension Arm Assembly[G]
	KL11-Y512 12" Cast Extension Arm Assembly[G]
	KL13-0010 Repair Kit[5] [G]
	KL18-0010 Repair Kit[3] [G]
	KL22-0010[3] [G]
	KL24-1100 Short Pedal Valve Assembly[G]
	KL24-1200 Pedal Valve Assembly, Shelf Mount[G]
	KL24-1302 Extended Pedal Valve Wall Mount w/ Stops[G]
	KL25-1000 Dual Pedal Foot Control Valve Assembly[G]
	KL25-2000 Single Pedal Foot Control Valve Assembly[G]
	KL25-3000 Dual Pedal Knee Control Valve Assembly[G]
	KL25-4000 Single Pedal Knee Control Valve Assembly[G]
	KL26-0010 Glass Filler Repair Kit[3] [G]
	KL35-7010 10" Quik-Fil 3/4" Add-on Faucet w/ 10" Spout[G]
	KL35-7012 12" Quik-Fil 3/4" Add-on Faucet w/ 12" Spout[G]
	KL35-7014 14" Quik-Fil 3/4" Add-on Faucet w/ 14" Spout[G]
	KL35-7018 18" Quik-Fil 3/4" Add-on Faucet w/ 18" Spout[G]
	KL35-7020 20" Quik-Fil 3/4" Add-on Faucet w/ 20" Spout[G]
	KL35-7022 22" Quik-Fil 3/4" Add-on Faucet w/ 22" Spout[G]
	KL35-7024 24" Quik-Fil 3/4" Add-on Faucet w/ 24" Spout[G]
	KL35-7028 28" Quik-Fil 3/4" Add-on Faucet w/ 28" Spout[G]
	KL35-Y001 Quik-Fil 3/4" Add-on Faucet[G]
	KL40-1000 Wall Faucet Mounting Kit[3] [G]
	KL40-3400 3/4" IPS Mounting Kit[G]
	KL40-3410 3/4" IPS Mounting Kit[G]
	KL91-0100 Mechanical Hand-Wash Faucet[3] [5] [G]
	KL91-Y003 Adapter Kit[3] [5] [G]
	KN91 Mechanical Handwash Faucet[3] [4]
	KPV-X001 Pot Filler[5]
[3] Optional exterior coating SANI-GUARD™. [4] XXX denotes length of spout up to 28 inches. [5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Pre-Rinse Hose Assembly
	KC50-Y004-20 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-20U Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-26 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-26U Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-44 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-44U Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-60 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-60U Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-72 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-72U Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-96 Commercial Pre-Rinse Hose Assembly w/ Grip[G]
	KC50-Y004-96U Commercial Pre-Rinse Hose Assembly w/ Grip[G]
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Spray Valves[3] [5]
KN50-0200

KN50-X065

KN50-X066

KN50-X135

KN50-Y002

KN50-Y027

KN50-Y030

KN50-Y031

[3] Optional exterior coating SANI-GUARD™. [5] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Vacuum Breakers
KL50-X137 Atmospheric Vacuum Breaker 3/8" NPT[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL50-X138 Atmospheric Vacuum Breaker 1/2" NPT[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KN50-X137 Atmospheric Vacuum Breaker 3/8" NPT

KN50-X138 Atmospheric Vacuum Breaker 1/2" NPT

Valves
KL24-Y002 Stop Valve, Cold[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
KL24-Y003 Stop Valve, Hot[G]

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Products Listed under the category of Commerical Kitchen and Bar Endpoint Devices are
      tested and Certified based upon their sole application being the delivery of water for
      high volume restaurant use or large batch food preparation.

Facility : Zhejiang, China

Mechanical Plumbing Devices

	Trade Designation
Faucet Spouts[1]
	KN11-X001 8 1/2" Swivel Goosneck Spout
	KL11-X000 3 1/2''' Swivel Gooseneck Spout
	KL50-X120 Aerator
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Faucet, Miscellaneous Faucet Components[1]
	KN91-0100 Mechanical Handwash Faucet
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-20 Pre-Rinse Hose Assembly w/ Grip
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Commercial Faucet[G]
	KL52-9XXX-YYY
	KL34-5500-PS
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL50-X120 Aerator with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL53-1XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X000 3 1/2''' Swivel Gooseneck Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-20U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X001 8 1/2'' Swivel Gooseneck Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL34-5622-PS
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X014 14" Swivel Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-26 Pre-Rinse Hose Assembly w/ Grip
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Commercial Faucet[G]
	KL53-5500-PS
	KL34-5660-PS
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X000-3 3 1/2'' Swivel Gooseneck Spout, 3'' Height
	KL11-X000-3 3 1/2'' Swivel Gooseneck Spout, 3'' Height with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-26U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Commercial Faucet[G]
	KL53-5555-PS
	KL34-8014-PS
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X014 14'' Swivel Spout with Saniguard
	KN11-X016 16" Swivel Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-44 Pre-Rinse Hose Assembly w/ Grip
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Commercial Faucet[G]
	KL34-8014-PSP
	KL53-5614-PS
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X001 8 1/2'' Swivel Goosneck Spout
	KL11-X001 8 1/2'' Swivel Goosneck Spout with Saniguard
	KN11-X016 16'' Swivel Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-44U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Commercial Faucet[G]
	KL53-5622-PS
	KL50-1XXX-YYY
	KL55-7XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X002 6'' Swivel Gooseneck Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-60 Pre-Rinse Hose Assembly w/ Grip
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X018 18" Double Jointed Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-60U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Commercial Faucet[G]
	KL56-1XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X018 18'' Double Jointed Spout with Saniguard
	KL11-X002 6'' Swivel Gooseneck Spout with Saniguard
	KL11-X006 6'' Swivel Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL58-4XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X020 20" Double Jointed Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-72 Pre-Rinse Hose Assembly w/ Grip
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X006 6'' Swivel Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL60-1XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Flexible Plumbing Connectors[G]
	KL50-Y004-72U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X020 20'' Double Jointed Spout with Saniguard
	KN11-X022 22" Double Jointed Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL62-8XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Flexible Plumbing Connectors[G]
	KL50-Y004-96 Pre-Rinse Hose Assembly w/ Grip
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X008 8'' Swivel Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL63-1XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X008 8'' Swivel Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y004-96U Pre-Rinse Hose Assemble w/ Grip and Hose Adapters
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X022 22'' Double Jointed Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL65-9XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X010 10'' Swivel Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y010-20 20" Pre-Rinse Hose (No Grip)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X024 24" Double Jointed Spout
	KL11-X010 10'' Swivel Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL69-1XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Flexible Plumbing Connectors[G]
	KL50-Y010-26 26" Pre-Rinse Hose (No Grip)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X024 24'' Double Jointed Spout with Saniguard
	KN11-X026 26" Double Jointed Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y010-44 44" Pre-Rinse Hose (No Grip)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Commercial Faucet[G]
	KL71-1XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X012 12'' Swivel Spout
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Commercial Faucet[G]
	KL73-1XXX-YYY
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X026 26'' Double Jointed Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y010-60 60" Pre-Rinse Hose (No Grip)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KL11-X012 12'' Swivel Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y010-72 72" Pre-Rinse Hose (No Grip)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X028 28" Double Jointed Spout
	KL11-X014 14'' Swivel Spout
	KN11-X028 28'' Double Jointed Spout with Saniguard
	KL11-X014 14'' Swivel Spout with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.
Flexible Plumbing Connectors[G]
	KL50-Y010-96 96" Pre-Rinse Hose (No Grip)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Faucet Spouts[1]
	KN11-X100 3 1/2" Rigid Gooseneck Spout
	KL11-X016 16'' Swivel Spout
	KL11-X016 16'' Swivel Spout with Saniguard
	KN11-X100 3 1/2'' Rigid Gooseneck Spout with Saniguard
	KN11-X101 8 1/2" Rigid Gooseneck Spout
	KL11-X018 18'' Double Jointed Spout
	KL11-X018 18'' Double Jointed Spout with Saniguard
	KN11-X101 8 1/2'' Rigid Gooseneck Spout with Saniguard
	KL11-X020 20'' Double Jointed Spout
	KN11-X102 6" Rigid Gooseneck Spout
	KN11-X102 6'' Rigid Gooseneck Spout with Saniguard
	KL11-X020 20'' Double Jointed Spout with Saniguard
	KN11-X112 12" Spout Extension
	KL11-X022 22'' Double Jointed Spout
	KL11-X022 22'' Double Jointed Spout with Saniguard
	KN11-X112 12'' Spout Extension with Saniguard
	KL11-X024 24'' Double Jointed Spout
	KL11-X024 24'' Double Jointed Spout with Saniguard
	KL11-X026 26'' Double Jointed Spout
	KL11-X026 26'' Double Jointed Spout with Saniguard
	KL11-X028 28'' Double Jointed Spout
	KL11-X028 28'' Double Jointed Spout with Saniguard
	KL11-X100 3 1/2'' Rigid Gooseneck Spout
	KL11-X100 3 1/2'' Rigid Gooseneck Spout with Saniguard
	KL11-X101 8 1/2'' Rigid Gooseneck Spout
	KL11-X101 8 1/2'' Rigid Gooseneck Spout with Saniguard
	KL11-X102 6'' Rigid Gooseneck Spout
	KL11-X102 6'' Rigid Gooseneck Spout with Saniguard
	KL11-X112 12'' Spout Extension
	KL11-X112 12'' Spout Extension with Saniguard
[1] These models are NSF Certified faucet components. The assembly of components does not constitute a NSF Certified faucet. Complete faucet assemblies are NSF Certified only if the assembled faucet appears in NSF Listings.

Facility : Changhua, Taiwan

Mechanical Plumbing Devices

	Trade Designation
Commercial Faucets
	5111 Single Water Inlet Pre-Rinse Unit
	5411 4-inch Deck Mount Pre-Rinse Unit
	5411-SD 4-inch Deck Mount Pre-Rinse Unit
	5811 8-inch Deck Mount Pre-Rinse Unit
	5821 8-inch Deck Mount Pre-Rinse Unit
Faucets
	4111-611D 4-inch Heavy Duty Double Pantry Faucet
	4111-611S Single Deck Mount Pantry Faucet
	4411-3522 4-inch Deck Mount Light Duty Commercial Faucet
	4411-611 4-inch Heavy Duty Deck Mount Faucet
	4421-3522 4-inch Wall Mount Light Duty Commercial Faucet
	4431-3522 4-inch Wall Mount Light Duty Commercial Faucet Back-Splash
	4811-611 8-inch Heavy Duty Deck Mount Faucet
	4821-611 8-inch Heavy Duty Deck Mount Faucet
	4821-812 8-inch Wall Mount Light Duty Commercial Faucet
	5501-6 Add On Faucet

Number of matching Manufacturers is 1
Number of matching Products is 493
Processing time was 0 seconds

NSF Product and Service Listings