These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=04470&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| JCM Industries, Inc. | |
| P.O. Box 1220 | |
| Nash, TX 75569-1220 | |
| United States | |
| 800-527-8482 | |
| 903-832-2581 |
Facility : Nash, TX
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Tapping Sleeves[G] |
||||
| Hanson Pipe and Precast Series 400 Ductile Iron Service Saddles | 2" - 120" | CLD 23 | MLTPL | |
| Hanson Pipe and Precast Series 400 Stainless Service Saddles | 2" - 120" | CLD 23 | MLTPL | |
| Hanson Pipe and Precast Series 410 Tapping Sleeves | 2" - 120" | CLD 23 | MLTPL | |
| JCM Series 114, 116 Repair Sleeves | 2" - 120" | CLD 23 | MLTPL | |
| JCM Series 400 Ductile Iron Service Saddles | 2" - 120" | CLD 23 | MLTPL | |
| JCM Series 400 Stainless Service Saddles | 2" - 120" | CLD 23 | MLTPL | |
| JCM Series 400, 410, 420, 440, 470, 480 Tapping Sleeves | 2" - 120" | CLD 23 | MLTPL | |
| JCM Series 430, 450, 460 Stainless Tapping Sleeves | 2" - 120" | CLD 23 | MLTPL | |
| T.D. Williamson Series 400 Ductile Iron Service Saddles | 2" - 120" | CLD 23 | MLTPL | |
| T.D. Williamson Series 400 Stainless Service Saddles | 2" - 120" | CLD 23 | MLTPL | |
| T.D. Williamson Series 410, 420, 440, 460, 470, 480 Tapping Sleeves | 2" - 120" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[G] |
||||
| Dresser Industries Inc. Series 110 Patch Clamps | 1/2" - 120" | CLD 23 | MLTPL | |
| Heil Series 800 Fabricated Steel & Stainless Steel Fittings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Ductile Iron Fittings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Fabricated Stainless Steel Fittings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Fabricated Steel Fittings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 100, 120, 130, 150, 160, 170 Universal Clamp Couplings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 106, 140 Bell Joint Leak Clamps | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 110, 112, 113, 115 Patch Clamps | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 200 Ductile Iron Couplings & End Caps | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 200 Steel Couplings & End Caps | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 300 Ductile Iron Flange Coupling Adapters | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 300 Steel Flanged Coupling Adapters & Closure Fittings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 430, 440 Line Stop Fittings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 800 Fabricated Expansion Joints | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 800 Fabricated Steel & Stainless Steel Fittings | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Series 840 Surge Suppressor | 1/2" - 120" | CLD 23 | MLTPL | |
| JCM Tees, Spools, and Fabrications | 1/2" - 120" | CLD 23 | MLTPL | |
| USA Bluebook, Inc. Series 100, 110, 130 , 160, 170 Universal Clamp Couplings | 1/2" - 120" | CLD 23 | MLTPL | |
| USA Bluebook, Inc. Series 110 Patch Clamps | 1/2" - 120" | CLD 23 | MLTPL | |
| USA Bluebook, Inc. Series 200 Ductile Iron Couplings & End Caps | 1/2" - 120" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
Number of matching Manufacturers is 1
Number of matching Products is 31
Processing time was 0 seconds