These NSF Official Listings are current as of Thursday, September 02, 2010 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=05720&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Belzona Inc. 
2000 N.W. 88 Court
Miami, FL 33172 
United States 
305-594-4994

Facility : Harrogate, N. Yorks, United Kingdom

Joining and Sealing Materials

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Sealants
  Belzona 1221 (Super E-Metal)[3] [1] [2] CLD 23 MM 

[1] For tank and distribution line use: No greater than 10% of surface area.
[2] For residential use: No greater than 150 sq. in. per residence.
[3] Certified product is marked (NSF Grade).


Protective (Barrier) Materials

      Water Water
    Water Contact Contact Contact
  Trade Designation Size Restriction Temp Material

Coatings - Fittings
  Belzona 5811DW (DW Immersion Grade)[1] >= 4" CLD 23 EPOXY 

[1] Colors: Gray, Beige
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 5 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 3:1 by volume.

Coatings - Pipe
  Belzona 5811DW (DW Immersion Grade)[1] >= 16" CLD 23 EPOXY 

[1] Colors: Gray, Beige
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 5 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 3:1 by volume.

Coatings - Tank
  Belzona 5811DW (DW Immersion Grade)[1] >= 500 gal. CLD 23 EPOXY
  Belzona 1341 (Supermetalglide)[2] [3] >= 100,000 gal. CLD 23 EPOXY 

[1] Colors: Gray, Beige
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 5 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 3:1 by volume.
[2] Colors: Blue, gray
    Number of Coats: 2
    Sequence of Coats: Any combination of Listed colors
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 6 hours at 75°F
    Final Cure Time and Temperature: 6 days at 75°F
    Special Comments: Mix ratio of A:B is 100:48 by weight.
[3] Certified product is marked (NSF Grade).

Coatings - Valve
  Belzona 5811DW (DW Immersion Grade)[1] >= 4" CLD 23 EPOXY
  Belzona 1341 (Supermetalglide)[2] [3] [4] >= 4" CLD 23 EPOXY 

[1] Colors: Gray, Beige
    Number of Coats: 2
    Maximum Field Use Dry Film Thickness (in mils): 10
    Recoat Cure Time and Temperature: 6-8 hours at 68°F (Max 72 hours)
    Final Cure Time and Temperature: 5 days at 68°F
    Special Comments: Mix ratio of Part A:Part B is 3:1 by volume.
[2] Colors: Blue, gray
    Number of Coats: 2
    Sequence of Coats: Any combination of Listed colors
    Maximum Field Use Dry Film Thickness (in mils): 20
    Maximum Thinner: None
    Recoat Cure Time and Temperature: 6 hours at 75°F
    Final Cure Time and Temperature: 6 days at 75°F
    Special Comments: Mix ratio of A:B is 100:48 by weight.
[3] Certified product is marked (NSF Grade).
[4] This product is also accepted for use on distribution line pumps with a
    minimum daily output of 4800 gallons per square foot of coated pump
    surface area.

Number of matching Manufacturers is 1
Number of matching Products is 7
Processing time was 0 seconds