These NSF Official Listings are current as of Thursday, September 02, 2010 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=08050&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Contech Corporation of California, Inc. | |
| 706 E. Main Street | |
| Stockton, CA 95202 | |
| United States | |
| 209-941-8324 |
Facility : Stockton, CA
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Tank |
||||
| Hydro-Pox CT-04-204[1] | >= 1000 gal. | CLD 23 | EPOXY | |
[1] Colors: White, Gray
Number of Coats: 1-4
Maximum Field Use Dry Film Thickness (in mils): 16
Maximum Thinner: None
Recoat/Cure Time: 4 hours at 68ºF
Final Cure Time/Temp: 7 days at 68ºF
Special Comments: Mix ratio of A:B is 1:1
|
||||
|
Coatings - Pipe |
||||
| Hydro-Pox CT-04-204[1] | >= 8" | CLD 30 | EPOXY | |
[1] Colors: White, Gray
Number of Coats: 1-4
Maximum Field Use Dry Film Thickness (in mils): 16
Maximum Thinner: None
Recoat/Cure Time: 4 hours at 68ºF
Final Cure Time/Temp: 7 days at 68ºF
Special Comments: Mix ratio of A:B is 1:1
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds