These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=0C850&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
Endress + Hauser Flowtec AG 
Kaegenstrasse 7
Reinach BL 1 
CH-4153 
Switzerland 
41 61 7156111

Facility : Greenwood, IN

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Water Meters [G]
  Promag D[1] [5] 1" - 6" C. HOT MLTPL
  Promag L[2] [5] 1" - 90" D. HOT MLTPL
  Promag L[3] [5] 1" - 80" CLD 23 MLTPL
  Promag L[4] [5] 1/2" - 24" C. HOT MLTPL
  Promag P[4] [5] 1/2" - 24" C. HOT MLTPL
  Promag S[2] [5] 1" - 90" D. HOT MLTPL
  Promag S[3] [5] 1" - 80" CLD 23 MLTPL
  Promag S[4] [5] 1/2" - 24" C. HOT MLTPL
  Promag W[2] [5] 1" - 90" D. HOT MLTPL
  Promag W[3] [5] 1" - 80" CLD 23 MLTPL
  Promag W[4] [5] 1/2" - 24" C. HOT MLTPL

[1] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[2] Liner: Hard Rubber
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[3] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[4] Liner: PTFE
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[5] Only products bearing the NSF Mark are Certified.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Suzhou, China

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Water Meters [G]
  Promag L[2] [3] 1" - 80" CLD 23 MLTPL
  Promag S[2] [3] 1" - 80" CLD 23 MLTPL
  Promag D[1] [3] 1" - 6" C. HOT MLTPL
  Promag W[2] [3] 1" - 80" CLD 23 MLTPL

[1] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[2] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[3] Only products bearing the NSF Mark are Certified.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Cernay, France

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Water Meters [G]
  Promag D[1] [5] 1" - 6" C. HOT MLTPL
  Promag L[2] [5] 1" - 90" D. HOT MLTPL
  Promag L[3] [5] 1" - 80" CLD 23 MLTPL
  Promag L[4] [5] 1/2" - 24" C. HOT MLTPL
  Promag P[4] [5] 1/2" - 24" C. HOT MLTPL
  Promag S[2] [5] 1" - 90" D. HOT MLTPL
  Promag S[3] [5] 1" - 80" CLD 23 MLTPL
  Promag S[4] [5] 1/2" - 24" C. HOT MLTPL
  Promag W[2] [5] 1" - 90" D. HOT MLTPL
  Promag W[3] [5] 1" - 80" CLD 23 MLTPL
  Promag W[4] [5] 1/2" - 24" C. HOT MLTPL

[1] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[2] Liner: Hard Rubber
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[3] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[4] Liner: PTFE
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[5] Only products bearing the NSF Mark are Certified.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Aurangabad, India

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Water Meters [G]
  Promag D[1] [3] 1" - 6" C. HOT MLTPL
  Promag L[2] [3] 1" - 80" CLD 23 MLTPL
  Promag S[2] [3] 1" - 80" CLD 23 MLTPL
  Promag W[2] [3] 1" - 80" CLD 23 MLTPL

[1] Liner: Polyamide
    Electrode Options: 1.4435/316L SS
[2] Liner: Polyurethane
    Electrode Options: 1.4435/316L SS, Alloy C-22, Tantalum
[3] Only products bearing the NSF Mark are Certified.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 30
Processing time was 0 seconds