These NSF Official Listings are current as of Wednesday, September 08, 2010 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=0D490&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Sherwin-Williams | |
| 710 106th Street | |
| Arlington, TX 76011 | |
| United States | |
| 817-640-0848 |
Facility : Arlington, TX
Protective (Barrier) Materials
| Water | Water | |||
| Water Contact | Contact | Contact | ||
| Trade Designation | Size Restriction | Temp | Material | |
|
Coatings - Fittings[1] [2] |
||||
| EAS8-70011 | >= 2" | CLD 23 | PEC | |
| EBS8-70003 | >= 2" | CLD 23 | PEC | |
| ECS8-70027 | >= 2" | CLD 23 | PEC | |
| EGS8-70010 | >= 2" | CLD 23 | PEC | |
| ELS8-70012 | >= 2" | CLD 23 | PEC | |
| ELS8-80002 | >= 2" | CLD 23 | PEC | |
| ELS8-80003 | >= 2" | CLD 23 | PEC | |
| ERS8-70002 | >= 2" | CLD 23 | PEC | |
| EWS8-70015 | >= 2" | CLD 23 | PEC | |
| EWS8-70024 | >= 2" | CLD 23 | PEC | |
| EWS8-80007 | >= 2" | CLD 23 | PEC | |
[1] Colors: Black oxide, blue, clear, gray, green, off white, red oxide, tank tan, white
Number of Coats: 1
Sequence of Coats: N/A
Maximum Field Use Dry Film Thickness (in mils): 10
Maximum Thinner: N/A
Recoat Cure Time and Temperature: 10 minutes at 350°F
[2] The suffixes indicate the following container type:
C - Box
D - Drum
I - Overpack/international box
J - Sample jar
S - Super sack
T - Tote
The number following the letter indicates fill size in number of pounds per container.
|
||||
|
Coatings - Pipe[1] [2] |
||||
| EAS8-70011 | >= 2" | CLD 23 | PEC | |
| EBS8-70003 | >= 2" | CLD 23 | PEC | |
| ECS8-70027 | >= 2" | CLD 23 | PEC | |
| EGS8-70010 | >= 2" | CLD 23 | PEC | |
| ELS8-70012 | >= 2" | CLD 23 | PEC | |
| ELS8-80002 | >= 2" | CLD 23 | PEC | |
| ELS8-80003 | >= 2" | CLD 23 | PEC | |
| ERS8-70002 | >= 2" | CLD 23 | PEC | |
| EWS8-70015 | >= 2" | CLD 23 | PEC | |
| EWS8-70024 | >= 2" | CLD 23 | PEC | |
| EWS8-80007 | >= 2" | CLD 23 | PEC | |
[1] Colors: Black oxide, blue, clear, gray, green, off white, red oxide, tank tan, white
Number of Coats: 1
Sequence of Coats: N/A
Maximum Field Use Dry Film Thickness (in mils): 10
Maximum Thinner: N/A
Recoat Cure Time and Temperature: 10 minutes at 350°F
[2] The suffixes indicate the following container type:
C - Box
D - Drum
I - Overpack/international box
J - Sample jar
S - Super sack
T - Tote
The number following the letter indicates fill size in number of pounds per container.
|
||||
|
Coatings - Tank[1] [2] |
||||
| EAS8-70011 | >= 1000 gal. | CLD 23 | PEC | |
| EBS8-70003 | >= 1000 gal. | CLD 23 | PEC | |
| ECS8-70027 | >= 1000 gal. | CLD 23 | PEC | |
| EGS8-70010 | >= 1000 gal. | CLD 23 | PEC | |
| ELS8-70012 | >= 1000 gal. | CLD 23 | PEC | |
| ELS8-80002 | >= 1000 gal. | CLD 23 | PEC | |
| ELS8-80003 | >= 1000 gal. | CLD 23 | PEC | |
| ERS8-70002 | >= 1000 gal. | CLD 23 | PEC | |
| EWS8-70015 | >= 1000 gal. | CLD 23 | PEC | |
| EWS8-70024 | >= 1000 gal. | CLD 23 | PEC | |
| EWS8-80007 | >= 1000 gal. | CLD 23 | PEC | |
[1] Colors: Black oxide, blue, clear, gray, green, off white, red oxide, tank tan, white
Number of Coats: 1
Sequence of Coats: N/A
Maximum Field Use Dry Film Thickness (in mils): 10
Maximum Thinner: N/A
Recoat Cure Time and Temperature: 10 minutes at 350°F
[2] The suffixes indicate the following container type:
C - Box
D - Drum
I - Overpack/international box
J - Sample jar
S - Super sack
T - Tote
The number following the letter indicates fill size in number of pounds per container.
|
||||
|
Coatings - Valve[1] [2] |
||||
| EAS8-70011 | >= 2" | CLD 23 | PEC | |
| EBS8-70003 | >= 2" | CLD 23 | PEC | |
| ECS8-70027 | >= 2" | CLD 23 | PEC | |
| EGS8-70010 | >= 2" | CLD 23 | PEC | |
| ELS8-70012 | >= 2" | CLD 23 | PEC | |
| ELS8-80002 | >= 2" | CLD 23 | PEC | |
| ELS8-80003 | >= 2" | CLD 23 | PEC | |
| ERS8-70002 | >= 2" | CLD 23 | PEC | |
| EWS8-70015 | >= 2" | CLD 23 | PEC | |
| EWS8-70024 | >= 2" | CLD 23 | PEC | |
| EWS8-80007 | >= 2" | CLD 23 | PEC | |
[1] Colors: Black oxide, blue, clear, gray, green, off white, red oxide, tank tan, white
Number of Coats: 1
Sequence of Coats: N/A
Maximum Field Use Dry Film Thickness (in mils): 10
Maximum Thinner: N/A
Recoat Cure Time and Temperature: 10 minutes at 350°F
[2] The suffixes indicate the following container type:
C - Box
D - Drum
I - Overpack/international box
J - Sample jar
S - Super sack
T - Tote
The number following the letter indicates fill size in number of pounds per container.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 44
Processing time was 1 seconds