These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=0M300&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
Xiamen Runner Industrial Corporation 
No. 69, Tianfeng Road
North Industrial Zone 
Jimei, Xiamen 
China 
86 592 6151 888
Visit this company's website

Facility : Xiamen, China

Mechanical Plumbing Devices

  Trade Designation      

Faucet Hose and Spray Assembly[1]
  322101 Brass Spray and Hose[2]      
  322111 Brass Spray and Hose[2]      
  3230(1)      
  3231(1)      
  3232(1)      
  3233(1)      
  3233(1)      
  3234(1)      
  3234(1)      
  3235(1)      
  3235(1)      
  324101      
  3245(1)      
  3255(1)      
  3260(1)      
  3265(1)      
  32901      
  33240 Spray Assembly[3]      
  332631(1)      
  338261      
  33830(1)      
  338311(1)      
  338701      
  3652[2]      
  365301 Pull-out Wand and Hose Assembly[4]      
  365710 Pull-Out Wand and Hose Assembly[8]      
  365720 Pull-Out Wand and Hose Assembly[8]      
  365801 Pull-Out Wand and Hose Assembly[8]      
  38211[G]      

[2] Certified pull-out wand finishes are Chrome Plated (CP), Oil Rubbed Bronze (2BZ),
    Physical Vacuum Deposit (PVD), or Vibrant Stainless Steel (VS).
[3] This product is available in two different options, a female threaded end or quick
    connector end.
[4] Pull-out wand finishes are either Bone, Chrome Plated (CP), Physical Vacuum Deposit
    (PVD), or White (WT).
[8] Pull-out wand finishes are either Chrome Plated (CP) or Stainless Steel (SS).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] (1) May be:
        0 - Spray head with hose
        1 - Spray head only
        2 - Hose only
        3 - Spray head with hose and hose guide
    
        Suffix Instruction
        Spray head colors may be noted as follows:
        AL  - Almond
        BK  - Black
        BS  - Biscuit spray head
        CP  - Chrome plated
        IV  - Ivory
        PVD - Physical vacuum deposit
        SN  - Satin nickel
        WT  - White

Faucet Handspray Head Assembly
  323101 Faucet Spray Head Assembly[2]      
  323111 Faucet Spray Head Assembly[2]      
  325101 Sidespray[5]      
  338501 Sidespray      
  359101 Pull-Out Wand[2]      
  359131 Pull Down[2]      
  359151 Pull Down[2]      
  364101 Kitchen Pullout Wand      
  3642 (1176828) Pull-Out Wand      
  364301 Pull-out[5]      
  365401 Pull-Down Spray Head      
  365501 Pull-Down Spray Head      
  365561 OLVERA Pull-Down Spray      
  365610 pull down faucet      
  367101 Pull Out Wand[G]      

[2] Certified pull-out wand finishes are Chrome Plated (CP), Oil Rubbed Bronze (2BZ),
    Physical Vacuum Deposit (PVD), or Vibrant Stainless Steel (VS).
[5] There are two optional finishes, CP and PVD, on the outer body, which does not contact
    water.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Faucet Pull-Out Hose Assembly
  338281 Kitchen Spray Hose Assembly[6]      
  338282 Hose Assembly[7]      
  3486-011 (1147738) Pull Down Faucet      
  348602 (1115537) Hose Assembly      
  348901 Kitchen Spray Hose Assembly[6]      
  348911 Kitchen Spray Hose Assembly[6]      

[6] Certified to a maximum length of 55 inches of 0.3 inch diameter tubing.
[7] Certified to a maximum length of 55 inches and an inner diameter of 0.39 inches.

Miscellaneous Faucet Componets
  3484-502 Spout Hose Assembly      
  3484-505 Spout Hose Assembly      
  3484-506 Spout Hose Assembly      


Number of matching Manufacturers is 1
Number of matching Products is 53
Processing time was 0 seconds