These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=0M300&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Xiamen Runner Industrial Corporation 
No. 69, Tianfeng Road
North Industrial Zone 
Jimei, Xiamen 
China 
86 592 6151 888
Visit this company's website

Facility : Xiamen, China

Mechanical Plumbing Devices

  Trade Designation      

Faucet Hose and Spray Assembly[1]
  38211[G]       

[2] Certified pull-out wand finishes are Chrome Plated (CP), Oil Rubbed Bronze (2BZ),
    Physical Vacuum Deposit (PVD), or Vibrant Stainless Steel (VS).
[3] This product is available in two different options, a female threaded end or quick
    connector end.
[4] Pull-out wand finishes are either Bone, Chrome Plated (CP), Physical Vacuum Deposit
    (PVD), or White (WT).
[8] Pull-out wand finishes are either Chrome Plated (CP) or Stainless Steel (SS).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


[1] (1) May be:
        0 - Spray head with hose
        1 - Spray head only
        2 - Hose only
        3 - Spray head with hose and hose guide
    
        Suffix Instruction
        Spray head colors may be noted as follows:
        AL  - Almond
        BK  - Black
        BS  - Biscuit spray head
        CP  - Chrome plated
        IV  - Ivory
        PVD - Physical vacuum deposit
        SN  - Satin nickel
        WT  - White

Faucet Handspray Head Assembly
  367101 Pull Out Wand[G]       

[2] Certified pull-out wand finishes are Chrome Plated (CP), Oil Rubbed Bronze (2BZ),
    Physical Vacuum Deposit (PVD), or Vibrant Stainless Steel (VS).
[5] There are two optional finishes, CP and PVD, on the outer body, which does not contact
    water.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds