[1] (1) Reinforcement/Braid: 12, 13, 14, 15, 22, 24, 25, or B.
    P - PVC inner tubing
    (2) Tubing inside diameter: L, S, T, W, or Z.
    (3) End configuration: A, B, C, K, or F.
    (4) Connection size: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, or 14
    (5) Hose length in inches not to exceed:
        110" for (2) - T
         90" for (2) - W
         85" for (2) - S
         76" for (2) - Z
         61" for (2) - L
[2] M  - Stainless steel braid
    T  - PVC inner braided reinforced
    MU - Uniprene stainless steel braided
    (1) End fitting combination
        0  - 1/2" FIP X 1/2" FIP
        1  - 3/8" FCM X 1/2" FIP
        2  - 7/16" FCM X 1/2" FIP
        3  - 1/2" FCM X 1/2" FIP
        4  - 3/8" FCM X 3/8" FCM
        5  - 7/8" FBC X 1/2" FIP
        6  - 1/4" FCM X 1/2" FCM
        7  - 7/8" FBC X 3/8" FCM
        8  - 7/8" FBC x 7/16" FCM
        9  - 7/8" FBC x 1/2" FCM 
        33 - 1/2" FCM X 1/2" FCM
        60 - 3/4" FIP X 1/2" FIP
        61 - 3/4" FIP X 3/8" FCM
        71 - 3/8" FCM X 3/8" Copper
    (2) Length in inches - not to exceed 40" in length
    Evaluated to a maximum length of 40" of 0.315" diameter tubing
[3] PEX Faucet Connector
    (1) Hose category: 
        11 – F11 Aluminum braided hose 
        14 – F14 Stainless steel flexible hose 
        15 – F15 Stainless steel braid 
        22 – F22 Brass flexible hose 
        24 – F24 Nylon braided hose 
    WPE – Watts PEX inner tubing 
    (2) Tubing inside diameter 
        DN6 – 5.5 ~ 6.5mm 
        DN8 – 7.5 ~ 8.5mm 
    (3) End configuration 
        A - Male fittings used for taps 
        B - Female fittings 
    (4) Connection size 
        0  - M10x1 
        1  - M11x1 
        2  - 1/8"
        3  - M12x1 
        4  - 1/4"
        5  - M15x1 
        6  - 3/8"
        7  - 7/16"
        8  - 1/2"
        9  - M8x1 
        11 - 11/16"
        12 - 3/4"
        14 - 7/8"
    (5) Hose length in centimeters, not to exceed: 
        280cm for DN6 
        216cm for DN8

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Connectors come in 12, 15, 18, and 24 inch lengths.
[2] The naming convention is as follows: 
    XX - Length in inches
    Prefix:
    BF 	- Bog flow
    C   - Connector 
    CTS - Copper tube size
    E   - Electric 
    F   - Female iron pipe
    FIP - Female iron pipe 
    G   - Gas
    H   - Heater 
    K   - Kit
    LF  - Lead free
    LBF - Large big flow 
    Q   - Quick connect 
    S   - Softener 
    -S- - Stainless 
    W   - Water
    Suffixes: 
    Certified for a maximum length of 60"
    A  - 7/8 Anderlign fitting x 3/4 FIP fittings 
    AA - Anderlign fitting at both ends 
    AF - Anderlign fitting and female fitting
    AM - Anderlign fitting and male fitting
    B  - 5/8 Anderlign fitting x 3/4 FIP fittings 
    C  - 3/4 FIP x 3/4 MIP fittings 
    D  - 7/8 Anderlign fitting x 3/4 MIP fittings 
    E  - 5/8 Anderlign fitting x 3/4 MIP fittings 
    F  - 1/2 C fitting x 5/8 C fitting 
    FF - Female fitting at both ends 
    FM - Female fitting and male fitting 
    G  - 1/2 FIP fitting x 3/4 FIP GH fittings 
    GH - Female fitting
[3] Certified for lengths between 12 and 24 inches, and connectors with fittings designed to
    attach PEX material.
[4] LF - Lead free
    S  - Stainless steel braid
    WH - Water heater
    (1) End fitting combination
        1 - 3/4" FIP x 3/4" FIP
        2 - 3/4" FIP x 3/4" COMP.
        3 - 3/4" FIP x 3/4" MIP
        4 - 3/4" MIP x 3/4" COMP.
    84 - Length in inches
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.