These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=10330&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Clack Corporation | |
| 4462 Duraform Lane | |
| Windsor, WI 53598-9716 | |
| United States | |
| 608-846-3010 |
Facility : # 0 USA
Process Media
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Filtration Media[G] |
||||
| Filter-AgŪ | 10 x 34 mesh | CLD 23 | SLDOX | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
NOTE: Certified for water treatment plant applications.
This product has not been evaluated for point of use applications.
Facility : Windsor, WI
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Tanks[G] |
||||
| 8X35 | 6.73 gal. | CLD 23 | MLTPL | |
| 8X40 | 7.69 gal. | CLD 23 | MLTPL | |
| 8X44 | 8.59 gal. | CLD 23 | MLTPL | |
| 9X35 | 8.19 gal. | CLD 23 | MLTPL | |
| 9X40 | 9.52 gal. | CLD 23 | MLTPL | |
| 9X48 | 11.53 gal. | CLD 23 | MLTPL | |
| 10X35 | 10.24 gal. | CLD 23 | MLTPL | |
| 10X40 | 12.02 gal. | CLD 23 | MLTPL | |
| 10X44 | 13.23 gal. | CLD 23 | MLTPL | |
| 10X47 | 14.2 gal. | CLD 23 | MLTPL | |
| 10X54 | 16.02 gal. | CLD 23 | MLTPL | |
| 12X48 | 20.8 gal. | CLD 23 | MLTPL | |
| 12X52 | 22.88 gal. | CLD 23 | MLTPL | |
| 13X54 | 27.84 gal. | CLD 23 | MLTPL | |
| 14x65 | 39.44 gal. | CLD 23 | MLTPL | |
| 16x65 | 51.2 gal. | CLD 23 | MLTPL | |
| 18x65 | 73.48 gal. | CLD 23 | MLTPL | |
| 21x62 | 89.59 gal. | CLD 23 | MLTPL | |
| 24x72 | 122.61 gal. | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Process Media
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Oxidative Media [G] |
||||
| BirmŪ[1] | 12x50 mesh | CLD 23 | MNDOX | |
| MTMŪ | 12x50 mesh | CLD 23 | MNDOX | |
[1] Certified for a minimum flow rate of 3.5 gpm/sq. ft (142 lpm/sq. m), using a bed depth
of 30-36 in (76-91 cm).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
NOTE: Certified for water treatment plant applications.
This product has not been evaluated for point of use applications.
Number of matching Manufacturers is 1
Number of matching Products is 22
Processing time was 0 seconds