These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=17660&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Smith-Blair, Inc. | |
| 30 Globe Avenue | |
| Texarkana, AR 71854 | |
| United States | |
| 800-643-9705 | |
| 870-773-5239 | |
| Visit this company's website |
Facility : Texarkana, AR
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Tapping Sleeves/Service Saddles |
||||
| Smith-Blair® 622 Tapping Sleeves[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® 623 Fabricated Mechanical Joint Tapping Sleeve[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® 625 Tapping Sleeves for Concrete Cylinder Pipe[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® 662 Tapping Sleeves Stainless Steel[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® 663 Tapping Sleeves Stainless Steel[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® 664 Tapping Sleeves Stainless Steel[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® 665 Tapping Sleeves Stainless Steel[G] | >= 4" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Couplings |
||||
| Smith-Blair® 411 Steel Coupling[G] | >= 2" | CLD 23 | MLTPL | |
| Smith-Blair® 413 Steel Transition Coupling[G] | >= 1 1/2" | CLD 23 | MLTPL | |
| Smith-Blair® 415 Steel Couplings Reducing[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® 416 Steel Couplings Insulating[G] | >= 2" | CLD 23 | MLTPL | |
| Smith-Blair® 418 Cast Tee Coupling[G] | >= 1 1/2" | CLD 23 | MLTPL | |
| Smith-Blair® 481 Steel Pipe End Cap[G] | >= 2" | CLD 23 | MLTPL | |
| Smith-Blair® Omni™ 441 Ductile Iron Straight/Transition Coupling[G] | >= 2" | CLD 23 | MLTPL | |
| Smith-Blair® Omni™ 442 Long Sleeve Ductile Iron Straight/Transition Coupling[G] | >= 4" | CLD 23 | MLTPL | |
| Smith-Blair® Omni™ R441 Ductile Iron Reducing Coupling[G] | >= 2" | CLD 23 | MLTPL | |
| Smith-Blair® Quantum® 461 Ductile Iron Wide-Range Coupling[G] | >= 1 1/2" | CLD 23 | MLTPL | |
| Smith-Blair® Quantum® 462 Long Sleeve Ductile Iron Wide-Range Coupling[G] | >= 4" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
|
Couplings/Repair Clamps[G] |
||||
| Smith Blair® 221 Full Circle® Low Pressure Repair Clamps | >= 2" | CLD 23 | MLTPL | |
| Smith Blair® 226 Full Circle® Repair Clamps | >= 2" | CLD 23 | MLTPL | |
| Smith Blair® 227 Full Circle® Repair Clamps | >= 3" | CLD 23 | MLTPL | |
| Smith Blair® 228 Full Circle® Repair Clamps | >= 14" | CLD 23 | MLTPL | |
| Smith Blair® 229 Full Circle® Repair Clamps | >= 2" | CLD 23 | MLTPL | |
| Smith Blair® 238 Tapped Full Circle® Repair Clamps | >= 2" | CLD 23 | MLTPL | |
| Smith Blair® 239 Tapped Full Circle® Repair Clamps | >= 4" | CLD 23 | MLTPL | |
| Smith Blair® 244 Full Circle Redi-Clamp® | 1/2" - 2" | CLD 23 | MLTPL | |
| Smith Blair® 245 Redi-Clamp® | 1/2" - 12" | CLD 23 | MLTPL | |
| Smith Blair® 246 Multi-Band Pipe Repair Clamp | >= 10" | CLD 23 | MLTPL | |
| Smith Blair® 247 All-Stainless Steel Full Circle Redi-Clamp® | 1/2" - 2" | CLD 23 | MLTPL | |
| Smith Blair® 248 All-Stainless Steel Redi-Clamp® | 1/2" - 12" | CLD 23 | MLTPL | |
| Smith Blair® 256 Full Circle® Repair Clamps | >= 2" | CLD 23 | MLTPL | |
| Smith Blair® 257 Full Circle® Repair Clamps | >= 4" | CLD 23 | MLTPL | |
| Smith Blair® 261 Full Circle® Repair Clamps | >= 2" | CLD 23 | MLTPL | |
| Smith Blair® 262 Double-Band All-Stainless Steel Fabricated Lug FCC | >= 3" | CLD 23 | MLTPL | |
| Smith Blair® 263 Full Circle® Repair Clamps | >= 10" | CLD 23 | MLTPL | |
| Smith Blair® 264 Tapped Single Band All-Stainless Steel Fabricated Lug FCC | >= 2" | CLD 23 | MLTPL | |
| Smith Blair® 265 Tapped Double-Band All-Stainless Steel Fabricated Lug FCC | >= 4" | CLD 23 | MLTPL | |
| Smith Blair® 267 Epoxy Coated Carbon Steel Body High Pressure FCC | >= 4" | CLD 23 | MLTPL | |
| Smith Blair® 268 All-Stainless Steel High Pressure FCC | >= 4" | CLD 23 | MLTPL | |
| Smith Blair® 269 Full Circle® Repair Clamps | >= 2" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Shanghai, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Service Saddles[G] |
||||
| Smith-Blair® 311 Single Bale Ductile Iron Body TaperSeal Service Saddle | 1" - 14" | CLD 23 | MLTPL | |
| Smith-Blair® 313 Double Bale Ductile Iron Body TaperSeal Service Saddle | 1" - 24" | CLD 23 | MLTPL | |
| Smith-Blair® 315 Ductile Iron Body TaperSeal Service Saddle Single Stainless | 1" - 14" | CLD 23 | MLTPL | |
| Smith-Blair® 317 Ductile Iron Body TaperSeal Service Saddle Double Stainless | 1" - 24" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Couplings[G] |
||||
| Smith-Blair® 912 Ductile Iron FCA | 3" - 12" | CLD 23 | MLTPL | |
| Smith-Blair® 926 Flexible Meter Coupling | 1 1/2" - 2" | CLD 23 | MLTPL | |
| Smith-Blair® Omni™ 441 Ductile Iron Straight/Transition Coupling | 2" - 16" | CLD 23 | MLTPL | |
| Smith-Blair® Omni™ 442 Long Sleeve Ductile Iron Straight/Transition Coupling | 4" - 16" | CLD 23 | MLTPL | |
| Smith-Blair® Omni™ R441 Ductile Iron Reducing Coupling | 2" - 8" | CLD 23 | MLTPL | |
| Smith-Blair® Quantum® 461 Ductile Iron Wide-Range Coupling | 1 1/2" - 12" | CLD 23 | MLTPL | |
| Smith-Blair® Quantum® 462 Long Sleeve Ductile Iron Wide-Range Coupling | 4" - 12" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
|
Couplings/Repair Clamps[1] [G] |
||||
| Smith Blair® 244 Full Circle Redi-Clamp® | 1/2" - 2" | CLD 23 | MLTPL | |
| Smith-Blair® 226 Single Band FCC | 2" - 14" | CLD 23 | MLTPL | |
| Smith-Blair® 227 Double Band FCC | 3" - 12" | CLD 23 | MLTPL | |
| Smith-Blair® 228 Multi-Band FCC for Large OD's | 14" - 30" | CLD 23 | MLTPL | |
| Smith-Blair® 229 Single Band Collar Leak FCC | 2" - 12" | CLD 23 | MLTPL | |
| Smith-Blair® 245 Redi-Clamp® | 1/2" - 12" | CLD 23 | MLTPL | |
| Smith-Blair® 261 Single Band All-Stainless Steel Fabricated Lug FCC | 2" - 12" | CLD 23 | MLTPL | |
| Smith-Blair® 262 Single Band All-Stainless Steel Fabricated Lug FCC | 3" - 12" | CLD 23 | MLTPL | |
| Smith-Blair® 263 Multi-Band All-Stainless Fabricated Lug FCC | 11" - 27" | CLD 23 | MLTPL | |
| Smith-Blair® 269 Single Band Collar Leak All-Stainless Steel Fabricated Lug FCC | 2" - 12" | CLD 23 | MLTPL | |
[1] Certified for a maximum 1/16" gap for pipe less than 4" in diameter and a maximum 1/4"
gap for pipe greater than or equal to 4" in diameter.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 61
Processing time was 0 seconds

