These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=1B310&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
Hersey Meters Incorporated 
10210 Statesville Boulevard
Cleveland, NC 27013 
United States 
800-273-8009 
704-278-2221

Facility : Cleveland, NC

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Water Meters[1]
  430II[G] 5/8" x 3/4" CLD 23 MLTPL
  430II[G] 5/8" x 1/2" CLD 23 MLTPL
  442II[G] 3/4" x 3/4" CLD 23 MLTPL
  442II[G] 3/4" x 1" CLD 23 MLTPL
  442II[G] 3/4" short x 3/4" CLD 23 MLTPL
  452II[G] 1" x 1" CLD 23 MLTPL
  562D[G] 1 1/2" CLD 23 MLTPL
  562II[G] 1 1/2" CLD 23 MLTPL
  572D[G] 2" CLD 23 MLTPL
  572II[G] 2" CLD 23 MLTPL
  MVR 1300[G] 6" CLD 23 MLTPL
  MVR 350[G] 3" CLD 23 MLTPL
  MVR 650[G] 4" CLD 23 MLTPL
  MVR100 Flanged[G] 1 1/2" CLD 23 MLTPL
  MVR100 Threaded[G] 1 1/2" CLD 23 MLTPL
  MVR160 Flanged[G] 2" CLD 23 MLTPL
  MVR160 Threaded[G] 2" CLD 23 MLTPL
  MVR30[G] 3/4" x 1/2" CLD 23 MLTPL
  MVR30A[G] 3/4" CLD 23 MLTPL
  MVR30B[G] 3/4" x 1" CLD 23 MLTPL
  MVR50[G] 1" CLD 23 MLTPL
  Model 420 Bronze Meter[G] [2] CLD 23 MLTPL
  Model 420 Bronze RDM Meter[G] [2] CLD 23 MLTPL
  Model 420 Plastic Meter[G] [2] CLD 23 MLTPL
  Model 435 Plastic Meter[G] 3/4" CLD 23 MLTPL
  Model 445 Plastic Meter[G] 1" CLD 23 MLTPL
  RFM100[G] 1 1/2" CLD 23 MLTPL
  RFM160[G] 2" CLD 23 MLTPL
  RFM30[G] 3/4" x 1/2" CLD 23 MLTPL
  RFM50[G] 1" CLD 23 MLTPL

[1] Only products bearing the NSF Mark are Certified.
[2] Certified for 5/8" x 1/2" and 5/8" x 3/4" models.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 30
Processing time was 0 seconds