These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=1B750&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Linx, Limited | |
| 875 Aquidneck Avenue | |
| Middletown, RI 02842 | |
| United States | |
| 401-841-0600 |
Facility : # 3 Zhejiang Province, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Ball Valves |
||||
| UniGrip Ball Valves (E9305-XX)[1] [G] | 1/2" - 1" | D. HOT | MLTPL | |
[1] Made with C69300. Each set of XX may be 05 (1/2"), 07 (3/4") or 08 (1"). [2] Made with Linxalloy. Each set of XX may be 05 (1/2"), 07 (3/4") or 08 (1"). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Icemaker Accessories |
||||
| UNIPEX IMK-1[G] | ||||
| UNIPEX IMK-2[G] | ||||
| UNIPEX IMK-3[G] | ||||
| UNIPEX IMK-4[G] | ||||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
|
Supply Stops[G] |
||||
| UNIGRIP E9601-0503 | ||||
| UNIGRIP E9601-0504 | ||||
| UNIGRIP E9601-0505 | ||||
| UNIGRIP E9601-0506 | ||||
| UNIGRIP E9602-0503 | ||||
| UNIGRIP E9602-0504 | ||||
| UNIGRIP E9602-0505 | ||||
| UNIGRIP E9602-0506 | ||||
| UNIGRIP E9701-0505 | ||||
| UNIGRIP E9702-0505 | ||||
| UNIGRIP E9801-0504 | ||||
| UNIGRIP E9801-0505 | ||||
| UNIGRIP E9802-0504 | ||||
| UNIGRIP E9802-0505 | ||||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings |
||||
| MAN6BARBG - PEX x Swivel Adapter[2] [G] | 1" | D. HOT | MLTPL | |
| MANPLUGG - Plug Seal[2] [G] | 1" | D. HOT | MLTPL | |
| MANYBARBG 3/4" PEX x Swivel Adapter[2] [G] | 3/4" | D. HOT | MLTPL | |
| UNIPEX Adapter (Swivel) - PEX x NPSM Brass Nut[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Adapter (Swivel) - PEX x NPSM Plastic Nut[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Adapter - PEX to PB (with crimp rings)[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Adapter - PEX x Compression[2] [G] | 3/8" - 1/2" | D. HOT | MLTPL | |
| UNIPEX Adapter - PEX x F Sweat[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Adapter - PEX x FPT[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Adapter - PEX x M Sweat[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Adapter - PEX x MPT[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Adapter - PEX x PE[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Coupling - PEX x PEX[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Coupling - PEX x PEX Not Drilled Through[2] [G] | 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Elbow (Swivel) PEX x NPSM-Brass Nut[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Elbow (Swivel) PEX x NPSM-Plastic Nut[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Elbow - PEX x F Sweat[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Elbow - PEX x FPT, Drop Ear[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Elbow - PEX x M Sweat[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Elbow - PEX x MPT[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Elbow - PEX x PEX[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX HEX NIPPLES - NPT x NPT[2] [6] [G] | 1/2" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Plug - PEX[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Tee - PEX[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Tee - PEX Reducing[2] [G] | 3/8" - 2" | D. HOT | MLTPL | |
| UNIPEX Tee - PEX x FPT[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UNIPEX Tee - PEX x MPT[2] [G] | 3/8" - 1 1/4" | D. HOT | MLTPL | |
| UniGrip Transition Adapter (E4045-A)[2] [G] | 1/2" | D. HOT | MLTPL | |
| UniGrip Transition Adapter (E7075-A)[2] [G] | 3/4" | D. HOT | MLTPL | |
| Unigrip Fittings[2] [4] [G] | 3/8" - 1" | D. HOT | MLTPL | |
[1] Made with Linxalloy.
[2] Made with C69300.
[4] Certified Configurations are:
Tee (E9401-XXXXXX)
Coupling (E9101-XXXX)
Tee, reducing (E9401-XXXXXX)
Elbow (E9201-XXXX)
Elbow, Unigrip X MNPT, 1/2" x 1/2" only (E9202-0505)
Elbow, Unigrip x FNPT, 1/2" x 1/2" only (E9203-0505)
Adapter, Unigrip x MPT (E9102-XXXX)
Adapter, Unigrip x FPT (E9103-XXXX)
Drop Ear Elbow, Unigrip x FPT, 1/2" x 1/2" and 3/8" x 1/2" only (E9095-0505 and
E9095-0405)
Drop Ear Elbow, UniGrip x UniGrip, 1/2" x 1/2" only (E9091-0505)
Test Cap (E9109-XX)
Each set of XX may be 04 (3/8"), 05 (1/2"), 07 (3/4") or 08 (1").
[5] Tee (D9401-XXXXXX)
Coupling (D9101-XXXX)
Tee, reducing (D9401-XXXXXX)
Elbow (D9201-XXXX)
Elbow, Unigrip X MNPT, 1/2" x 1/2" only (D9202-0505)
Elbow, Unigrip x FNPT, 1/2" x 1/2" (D9203-0505), 3/4" x 3/4" (D9203-0707)
Adapter, Unigrip x MPT (D9102-XXXX)
Adapter, Unigrip x FPT (D9103-XXXX)
Drop Ear Elbow, Unigrip x FPT, 1/2" x 1/2", 3/8" x 1/2" only (D9095-0505 and D9095-0405)
Drop Ear Elbow, Unigrip x Unigrip, 1/2" x 1/2" only (D9091-0505)
Test Cap (D9109-XX)
Each set of XX may be 04 (3/8"), 05 (1/2"), 07 (3/4") or 08 (1"
[6] UNIPEX HEX NIPPLES include the following part numbers:
E306-R-86 1/2" x 3/8"
E306-8 1/2" x 1/2"
E306-R-126 3/4" x 3/8"
E306-R-128 3/4" x 1/2"
E306-12 3/4" x 3/4"
E306-R-168 1" x 1/2"
E306-R1612 1" x 3/4"
E306-R-1616 1" x 1"
E306-R-1812 1 1/4" x 3/4"
E306-R-1816 1 1/4" x 1"
[7] Made with LF70.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : Shanghai, China
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings [G] |
||||
| Polysulfone UniGrip x FPT Swivel Adapter 291130505 | 1/2" | D. HOT | MLTPL | |
| Polysulfone UniGrip x FPT Swivel Adapter 291130707 | 3/4" | D. HOT | MLTPL | |
| UNIGRIP C9101-XXXX Coupling[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UNIGRIP C9109-XX Test Cap[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UNIGRIP C9201-XXXX Elbow[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UNIGRIP C9401-XXXXXX Tee[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UNIGRIP C9401-XXXXXX Tee, Reducing[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UniGrip 29101-XXXX Coupling[2] | 1/2" - 3/4" | D. HOT | MLTPL | |
| UniGrip 29109-XX Test Cap[2] | 1/2" - 3/4" | D. HOT | MLTPL | |
| UniGrip 29201-XXXX Elbow[2] | 1/2" - 3/4" | D. HOT | MLTPL | |
| UniGrip 29401-XXXXXX Tee[2] | 1/2" - 3/4" | D. HOT | MLTPL | |
| UniGrip 29509-XXXX Adapter, UniGrip x MPT[2] | 1/2" - 3/4" | D. HOT | MLTPL | |
| UniGrip C9102-XXXX Adapter[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UniGrip C9103-XXXX Adapter[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UniGrip C9202-XXXX Elbow[1] | 1/2" - 1" | D. HOT | MLTPL | |
| UniGrip C9203-XXXX Elbow[1] | 1/2" - 1" | D. HOT | MLTPL | |
[1] Each set of XX may be 05 (1/2"), 07 (3/4"), or 08 (1"). [2] Each set of XX may be 05 (1/2") or 07 (3/4"). [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
|
Flexible Plumbing Connectors[G] |
||||
| UNITED HCC-518-518-12 | 3/4" | D. HOT | MLTPL | |
| UNITED HCC-518-518-15 | 3/4" | D. HOT | MLTPL | |
| UNITED HCC-518-518-18 | 3/4" | D. HOT | MLTPL | |
| UNITED HCC-518-518-24 | 3/4" | D. HOT | MLTPL | |
| UNITED HEC-518-618-12 | 3/4" | D. HOT | MLTPL | |
| UNITED HEC-518-618-15 | 3/4" | D. HOT | MLTPL | |
| UNITED HEC-518-618-18 | 3/4" | D. HOT | MLTPL | |
| UNITED HEC-518-618-24 | 3/4" | D. HOT | MLTPL | |
| UNITED HFC-518-918-12 | 3/4" | D. HOT | MLTPL | |
| UNITED HFC-518-918-15 | 3/4" | D. HOT | MLTPL | |
| UNITED HFC-518-918-18 | 3/4" | D. HOT | MLTPL | |
| UNITED HFC-518-918-24 | 3/4" | D. HOT | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Number of matching Manufacturers is 1
Number of matching Products is 77
Processing time was 0 seconds