These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=1R140&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
N.D.S., Inc. 
851 North Harvard
Lindsay, CA 93247 
United States 
800-992-9949 
559-562-9888
Visit this company's website

Facility : Lindsay, CA

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Service Saddles[G]
  Clamp-It™ Saddles 1 1/2" - 8" CLD 23 MLTPL
  Saddles for Polypipe 1 1/2" - 8" CLD 23 MLTPL 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Valves [G]
  1001 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1002 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1011 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1012 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1090 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1136 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1200 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1500 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL
  1700 Series Valves[1] [2] 1/2" - 6" CLD 23 MLTPL 

[1] Each trade name is followed by a two digit value which equates to a part size as
    follows:
    05: 1/2"
    07: 3/4"
    10: 1"
    12: 1 1/4"
    15: 1 1/2"
    20: 2"
    25: 2 1/2"
    30: 3"
    40: 4"
    60: 6"
    71: 3/4" - 1"
[2] Some trade names may be followed by a second two or three digit value which equates to
    spring tension as follows:
    01:  1 lb
    05:  5 lbs
    075: 7.5 lbs
    10:  10 lbs
    15:  15 lbs
    20:  20 lbs
    30:  30 lbs
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Fittings [G]
  Adapters 100 Series[1] 1/2" - 6" CLD 23 MLTPL
  Adapters 1100 Series[1] 1/2" - 6" CLD 23 MLTPL
  Adapters 500 Series[2] 1/2" - 2" CLD 23 MLTPL
  Adapters 700 Series[2] 1/2" - 2" CLD 23 MLTPL
  Adapters 800 Series[2] 1/2" - 2" CLD 23 MLTPL
  Couplings 100 Series[1] 1/2" - 6" CLD 23 MLTPL
  Couplings 200 Series[1] 1/2" - 6" CLD 23 MLTPL
  Couplings 500 Series[2] 1/2" - 2" CLD 23 MLTPL
  Couplings 700 Series[2] 1/2" - 2" CLD 23 MLTPL
  Couplings 800 Series[2] 1/2" - 2" CLD 23 MLTPL
  Flo-Lock Compression Fittings[2] 1/2" - 2" CLD 23 MLTPL
  Tees 100 Series[1] 1/2" - 6" CLD 23 MLTPL
  Tees 200 Series[1] 1/2" - 6" CLD 23 MLTPL 

[1] Each trade name is followed by a two digit value which equates to a part size as
    follows:
    05: 1/2"
    07: 3/4"
    10: 1"
    12: 1 1/4"
    15: 1 1/2"
    20: 2"
    25: 2 1/2"
    30: 3"
    40: 4"
    60: 6"
    71: 3/4" - 1"
[2] Each trade name is followed by a two digit value which equates to a part size as
    follows:
    05:  1/2"
    07:  3/4"
    71:  3/4" - 1"
    10:  1"
    12:  1 1/4"
    15:  1 1/2"
    20:  2"
    121: 1" x 1 1/4"
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds