These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=20330&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Mueller Co. 
500 West Eldorado Street
P.O. Box 671 
Decatur, IL 62525 
United States 
217-423-4471
Visit this company's website

Facility : Chattanooga, TN

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Valves
  A2120 Series Check Valve - Bronze Disc Facing 4" - 14" CLD 23 MLTPL
  A2122 Series Check Valve - Rubber Disc Facing 4" - 14" CLD 23 MLTPL
  A2600 Series Check Valve - Bronze Disc Facing 4" - 14" CLD 23 MLTPL
  A2602 Series Check Valve - Rubber Disc Facing 4" - 14" CLD 23 MLTPL
  A2604 Series Cushioned Check Valve - Bronze Disc Facing 4" - 14" CLD 23 MLTPL
  A2606 Series Cushioned Check Valve - Rubber Disc Facing 4" - 14" CLD 23 MLTPL
  H-840 Cut-In Sleeves[G] 4" - 12" CLD 23 MLTPL
  H-841 Cut-In Sleeves[G] 4" - 12" CLD 23 MLTPL
  H-842 Cut-In Sleeves[G] 4" - 12" CLD 23 MLTPL
  H-843 Cut-In Sleeves[G] 4" - 12" CLD 23 MLTPL
  Mueller Double Disc Gate Valve (NRS) >= 4" CLD 23 MLTPL
  Mueller Double Disc Gate Valve (OS+Y) >= 4" CLD 23 MLTPL
  Mueller Super Seal™ Resilient Wedge Gate Valve (NRS) >= 2" CLD 23 MLTPL
  Mueller Super Seal™ Resilient Wedge Gate Valve (OS+Y) >= 2" CLD 23 MLTPL
  Mueller® Series R-2365 OS&Y Resilient Wedge Gate Valve[G] 2 1/2" - 8" CLD 23 MLTPL
  U.S. Pipe Resilient Wedge Gate Valve (NRS) >= 2" CLD 23 MLTPL
  U.S. Pipe Resilient Wedge Gate Valve (OS&Y) >= 2" CLD 23 MLTPL 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tapping Sleeves/Service Saddles[G]
  H612 Tapping Sleeve 4" - 8" CLD 30 MLTPL
  H613 Tapping Sleeve 4" - 12" CLD 30 MLTPL
  H-615 Tapping Sleeve 4" - 24" CLD 23 MLTPL
  H-616 Tapping Sleeve 10" - 24" CLD 23 MLTPL
  H-619 Tapping Sleeve 4" - 12" CLD 23 MLTPL
  H-715 Tapping Cross 4" - 24" CLD 23 MLTPL
  H-716 Tapping Cross 10" - 24" CLD 23 MLTPL
  H-719 Tapping Cross 4" - 12" CLD 23 MLTPL
  U.S. Pipe T-9 Tapping Sleeve 30" - 36" CLD 23 MLTPL 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Cleveland, TN

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Service Saddles
  Mueller® Stainless Steel Saddles SS(A)(B)(C)(D)(E)[1] [G] 4" - 12" CLD 23 MLTPL 

[1] A: Length
       5 - 5" (S or D)
       7 - 7 1/2" (D only)
    B: Number of Studs
       S - Single
       D - Double
    C: Outer Diameter Range (in inches)
       0450 - 4.50-4.80
       0663 - 6.63-6.9
       0863 - 8.63-9.05
       1075 - 10.75-11.10
       1275 - 12.75-13.20
    D: Thread Style
       CC - Mueller Thread
       IP - National Thread
    E: Tap Size
       075 - 3/4" (S or D)
       100 - 1" (S or D)
       125 - 1 1/4" (D only, IP only)
       150 - 1 1/2" (D only)
       200 - 2" (D only)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Tapping Sleeves/Service Saddles
  13,000 Series Service Saddles[2] >= 4" CLD 23 MLTPL
  304 Fabricated Tapping Sleeve[G] >= 3" CLD 23 MLTPL
  BR Series Service Saddles >= 4" CLD 23 MLTPL
  Ductile Iron Service Saddles[G] 2" - 12" CLD 23 MLTPL
  H300 Fabricated Tapping Sleeve[G] >= 4" CLD 23 MLTPL 

[2] Certification includes the Hinged Service Saddles designated as DIPS or IPS.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Fittings [G]
  200 Series Pipe Saver Repair Clamps[1] >= 1/2" CLD 23 MLTPL
  500 Series Pipe Saver Repair Clamps[1] >= 1/2" CLD 23 MLTPL
  Aqua Grip Couplings 3" - 12" CLD 23 MLTPL
  Aqua Grip Flange Adapters 3" - 12" CLD 23 MLTPL
  Mueller Maxi-Range Couplings 2" - 12" CLD 23 MLTPL 

[1] Certification based on a maximum use of 0.9 sq. in./L.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Brenham, TX

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Tapping Sleeves
  U.S. Pipe T-28 Tapping Sleeve[1] [G] 6" x 3" - 16" x 12" CLD 23 MLTPL 

[1] Sizes are expressed as pipe diameter x outlet diameter.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 38
Processing time was 0 seconds