These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=20330&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Mueller Co. | |
| 500 West Eldorado Street | |
| P.O. Box 671 | |
| Decatur, IL 62525 | |
| United States | |
| 217-423-4471 | |
| Visit this company's website |
Facility : Chattanooga, TN
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Valves |
||||
| H-840 Cut-In Sleeves[G] | 4" - 12" | CLD 23 | MLTPL | |
| H-841 Cut-In Sleeves[G] | 4" - 12" | CLD 23 | MLTPL | |
| H-842 Cut-In Sleeves[G] | 4" - 12" | CLD 23 | MLTPL | |
| H-843 Cut-In Sleeves[G] | 4" - 12" | CLD 23 | MLTPL | |
| MuellerŪ Series R-2365 OS&Y Resilient Wedge Gate Valve[G] | 2 1/2" - 8" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
|
Tapping Sleeves/Service Saddles[G] |
||||
| H612 Tapping Sleeve | 4" - 8" | CLD 30 | MLTPL | |
| H613 Tapping Sleeve | 4" - 12" | CLD 30 | MLTPL | |
| H-615 Tapping Sleeve | 4" - 24" | CLD 23 | MLTPL | |
| H-616 Tapping Sleeve | 10" - 24" | CLD 23 | MLTPL | |
| H-619 Tapping Sleeve | 4" - 12" | CLD 23 | MLTPL | |
| H-715 Tapping Cross | 4" - 24" | CLD 23 | MLTPL | |
| H-716 Tapping Cross | 10" - 24" | CLD 23 | MLTPL | |
| H-719 Tapping Cross | 4" - 12" | CLD 23 | MLTPL | |
| U.S. Pipe T-9 Tapping Sleeve | 30" - 36" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Cleveland, TN
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Service Saddles |
||||
| MuellerŪ Stainless Steel Saddles SS(A)(B)(C)(D)(E)[1] [G] | 4" - 12" | CLD 23 | MLTPL | |
[1] A: Length
5 - 5" (S or D)
7 - 7 1/2" (D only)
B: Number of Studs
S - Single
D - Double
C: Outer Diameter Range (in inches)
0450 - 4.50-4.80
0663 - 6.63-6.9
0863 - 8.63-9.05
1075 - 10.75-11.10
1275 - 12.75-13.20
D: Thread Style
CC - Mueller Thread
IP - National Thread
E: Tap Size
075 - 3/4" (S or D)
100 - 1" (S or D)
125 - 1 1/4" (D only, IP only)
150 - 1 1/2" (D only)
200 - 2" (D only)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
|
Tapping Sleeves/Service Saddles |
||||
| 304 Fabricated Tapping Sleeve[G] | >= 3" | CLD 23 | MLTPL | |
| Ductile Iron Service Saddles[G] | 2" - 12" | CLD 23 | MLTPL | |
| H300 Fabricated Tapping Sleeve[G] | >= 4" | CLD 23 | MLTPL | |
[2] Certification includes the Hinged Service Saddles designated as DIPS or IPS. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings [G] |
||||
| 200 Series Pipe Saver Repair Clamps[1] | >= 1/2" | CLD 23 | MLTPL | |
| 500 Series Pipe Saver Repair Clamps[1] | >= 1/2" | CLD 23 | MLTPL | |
| Aqua Grip Couplings | 3" - 12" | CLD 23 | MLTPL | |
| Aqua Grip Flange Adapters | 3" - 12" | CLD 23 | MLTPL | |
| Mueller Maxi-Range Couplings | 2" - 12" | CLD 23 | MLTPL | |
[1] Certification based on a maximum use of 0.9 sq. in./L. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Brenham, TX
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Tapping Sleeves |
||||
| U.S. Pipe T-28 Tapping Sleeve[1] [G] | 6" x 3" - 16" x 12" | CLD 23 | MLTPL | |
[1] Sizes are expressed as pipe diameter x outlet diameter. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds