These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=25102&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
J-M Manufacturing Co., Inc. 
9 Peach Tree Hill Road
Livingston, NJ 07039 
United States 
310-693-8200
Visit this company's website

Facility : # 1 Adel, GA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 30 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 2 Batchelor, LA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 23 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 3 Butner, NC

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 30 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 6 Fontana, CA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 30 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 7 Hastings, NE

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe [G]
  Baron[1] 1/2" - 8" CLD 23 PVC
  Eagle[1] 1/2" - 8" CLD 23 PVC
  Eagle Well Casing[1] 2" - 8" CLD 23 PVC
  PW Eagle[1] 1/2" - 8" CLD 23 PVC
  PW Pipe[1] 1/2" - 8" CLD 23 PVC
  PW Pipe Baron[1] 1/2" - 8" CLD 23 PVC
  PW Pipe Solar-Blok[1] 1/2" - 4" CLD 23 PVC
  PW Pipe Well Casing[1] 2" - 8" CLD 23 PVC
  Solar-Blok[1] 1/2" - 4" CLD 23 PVC
  Weld-Loc >= 1/2" CLD 23 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 10 Umatilla, OR

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 23 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 11 Cochranton, PA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 23 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 12 Perris, CA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 23 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 13 Pueblo, CO

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 30 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 14 Stockton, CA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 30 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 17 Tulsa, OK

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Fittings[1] [G]
  USPoly PE 3408 Molded Fittings >= 1/2" CLD 23 PE

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe[1] [G]
  Eagle 3408 1/2" - 24" CLD 23 PE
  Eagle 3408 CTS 1/2" - 24" CLD 23 PE
  Eagle Geo-Flo 1/2" - 24" CLD 23 PE
  Eagle-Tough Turf Irrigation Pipe 1/2" - 24" CLD 23 PE
  Eagle-Tough Turf Mainline 1/2" - 24" CLD 23 PE
  Pure Core 1/2" - 24" CLD 23 PE
  Pure Core CTS 1/2" - 24" CLD 23 PE
  USPoly 1/2" - 24" CLD 23 PE
  USPoly Eagle 3408 1/2" - 24" CLD 23 PE
  USPoly Eagle 3408 CTS 1/2" - 24" CLD 23 PE
  USPoly Eagle Geo-Flo 1/2" - 24" CLD 23 PE
  USPoly Eagle-Tough Turf Irrigation Pipe 1/2" - 24" CLD 23 PE
  USPoly Eagle-Tough Turf Mainline 1/2" - 24" CLD 23 PE
  USPoly Pure Core 1/2" - 24" CLD 23 PE
  USPoly Pure Core CTS 1/2" - 24" CLD 23 PE
  USPoly UAC 4000 AQUA-STRIPE 1/2" - 24" CLD 23 PE

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 18 Visalia, CA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 23 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 19 Wharton, TX

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 30 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Facility : # 20 Wilton, IA

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe Only[1] [G]
  J-M Manufacturing >= 1/2" CLD 30 PVC

[1] This product may be marked with an alternate trade name: J-M Manufacturing and/or PW
    Eagle and/or [JMM Logo] and/or JM Eagle and/or [JM Eagle Logo].
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

NOTE: Only products bearing the NSF Mark are Certified.

Number of matching Manufacturers is 1
Number of matching Products is 39
Processing time was 0 seconds