These NSF Official Listings are current as of Sunday, September 05, 2010 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=25280&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
MFC Sealing Technology Co., Ltd. / MFC Sealing Technology (Shenzhen) Co., Ltd. 
No. 41 Wu-Chuan-Wu Road
Wu-ku Industrial Zone, Taipei Hsien 248 
Taiwan 
86 755 2882 8056

Facility : Shen-Zhen City, China

Joining and Sealing Materials

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Gasket/Sealing Materials
  E7014F [6] C. HOT EPDM
  E7035PF[5] 1.0 sq. in./L C. HOT EPDM
  E8004F[4] 2.0 sq. in./L C. HOT EPDM
  N7012F[3] 2.0 sq. in./L C. HOT NBR
  S7040F[1] 2.0 sq. in./L C. HOT SLC 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.33 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.4 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings
  E7014F [6] C. HOT EPDM
  E7035PF[5] 1.0 sq. in./L C. HOT EPDM
  E8004F[4] 2.0 sq. in./L C. HOT EPDM
  N7012F[3] 2.0 sq. in./L C. HOT NBR
  S7040F[1] 2.0 sq. in./L C. HOT SLC 

[1] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 2.0 sq. in./L.
[3] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.33 sq. in./L.
[4] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.4 sq. in./L.
[5] This product has also been evaluated for use in Mechanical Plumbing Device applications
    with a maximum use restriction of 0.1 sq. in./L.
[6] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.


Mechanical Plumbing Devices

  Trade Designation      

Gasket/Sealing Materials

NA
  E7014F[1]      
  V7019F[2]       

[1] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

O-Rings
  E7014F[1]      
  V7019F[2]       

[1] Certified for a maximum surface area to volume ratio of 1.5 sq. in./L.
[2] Certified for a maximum surface area to volume ratio of 2.0 sq. in./L.

Number of matching Manufacturers is 1
Number of matching Products is 14
Processing time was 0 seconds