These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=27550&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
Klüber Lubrication München SE & Co. KG 
Geisenhausenerstrasse 7
D-81379 Munich 
Germany 
49 89 78760
Visit this company's website

Facility : Munich, Germany

Joining and Sealing Materials

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Lubricants [G]
  022171 Unisilkon NCA 3001 [1] C. HOT LUB
  Ideal Standard 12 [1] C. HOT LUB
  Klubersynth UH1 64-2403 >= 1/2" C. HOT LUB
  Klubersynth V 64-300 >= 1/2" C. HOT LUB
  Klüberbeta VR 67-17002 >= 1/2" D. HOT LUB
  Klüberbeta VR 67-3500 >= 1/2" D. HOT LUB
  Paraliq GTE 703 >= 1/2" C. HOT LUB
  Testsample C1 >= 1/2" C. HOT LUB
  UNISILKON LCA 3801 >= 1/2" C. HOT LUB
  Unisilkon L 250L >= 1/2" C. HOT LUB
  Unisilkon L 641 >= 1/2" C. HOT LUB
  Unisilkon NCA 3001 [1] C. HOT LUB

[1] The exposed surface area covered by this lubricant should not exceed the
     ratio of 0.6 sq. in./L.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Barcelona, Spain

Joining and Sealing Materials

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Lubricants[G]
  Klüberbeta VR 67-17002 >= 1/2" D. HOT LUB

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 13
Processing time was 0 seconds