These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=29900&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
Kuriyama Canada, Inc. 
140 Roy Boulevard
Brantford, ON N3R 7K2 
Canada 
519-759-5111
Visit this company's website

Facility : Williamsport, IN

Mechanical Plumbing Devices

  Trade Designation      

Hose[1] [2] [G]
  BC3280      
  BC3280X      
  BC3285      
  BC3285X      
  BC3288      
  BC3290      
  BC3290X      
  BC3295      
  BC3295X      
  BC3298      
  K3159      
  K3159X      
  K3250      
  K3250X      
  K3255      
  K3255X      
  K3258      
  K3280      
  K3280X      
  K3285      
  K3285X      
  K3288      
  K3290      
  K3290X      
  K3295      
  K3295X      
  K3298      

[1] X - A, B, C, etc. indicates other designations for exterior characteristics such as
    exterior color (blue, grey, or white).
[2] Certified for a maximum surface area to volume ratio of 130 sq. in./L.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Brantford, Ontario, Canada

Mechanical Plumbing Devices

  Trade Designation      

Hose[1] [2] [G]
  BC3280      
  BC3280X      
  BC3285      
  BC3285X      
  BC3288      
  BC3290      
  BC3290X      
  BC3295      
  BC3295X      
  BC3298      
  K3159      
  K3159X      
  K3250      
  K3250X      
  K3255      
  K3255X      
  K3258      
  K3280      
  K3280X      
  K3285      
  K3285X      
  K3288      
  K3290      
  K3290X      
  K3295      
  K3295X      
  K3298      

[1] X - A, B, C, etc. indicates other designations for exterior characteristics such as
    exterior color (blue, grey, or white).
[2] Certified for a maximum surface area to volume ratio of 130 sq. in./L.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Potable Water Materials

      Water Water
      Contact Contact
  Trade Designation End Use Temp Material

Tubing Material [G]
  KCO 41 (Clear or Blue tint) P[1] CLD 23 PVC
  KCO 41-W (White) P[1] CLD 23 PVC
  KCO 41-G (Grey) P[1] CLD 23 PVC
  KCO 42 (Clear or Blue tint) P[1] CLD 23 PVC
  KCO 42-W (White) P[1] CLD 23 PVC
  KCO 42-G (Grey) P[1] CLD 23 PVC
  KCO 46 (Clear or Blue tint) P[1] CLD 23 PVC
  KCO 46-W (White) P[1] CLD 23 PVC
  KCO 46-G (Grey) P[1] CLD 23 PVC

[1] Flexible PVC material intended for riser tubing or faucet components. Not to exceed a
    use of 128.9 square inches per liter (e.g. 164 inches of 1/4" tubing).
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 63
Processing time was 0 seconds