These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=2X380&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
3M Purification Inc. (formerly Cuno, Incorporated) 
400 Research Parkway
Meriden, CT 06450 
United States 
651-733-0587
Visit this company's website

Facility : Juarez, Chihuahua, Mexico

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Microfiltration Devices [G]
  742B[2] [1] CLD 23 MLTPL
  742B30[2] [1] CLD 23 MLTPL
  743B[2] [1] CLD 23 MLTPL
  743B30[2] [1] CLD 23 MLTPL
  743KF[2] [1] CLD 23 MLTPL
  744B[2] [1] CLD 23 MLTPL
  744B30[2] [1] CLD 23 MLTPL
  744KF[2] [1] CLD 23 MLTPL
  745B[2] [1] CLD 23 MLTPL
  745B30[2] [1] CLD 23 MLTPL
  745KF[2] [1] CLD 23 MLTPL
  746B[2] [1] CLD 23 MLTPL
  746B30[2] [1] CLD 23 MLTPL
  746KF[2] [1] CLD 23 MLTPL
  Cuno High Flow Filter Element (HF-WW-PP-XXX-Y-Z)[3] [4] CLD 23 MLTPL 

[1] Certified for a minimum flow rate of 55,000 L/day.
    Dimensions: 
    B30 units - 28.75" long, 6.5" outer diameter, and 1.6" inner diameter.
    B units   - 39" long, 6.5" outer diameter, and 1.6" inner diameter.
    KF units  - 39" long, 6.5" outer diameter, and 1.6" inner diamter.
[2] Product codes: 
    742 - 1 micron
    743 - 2 micron
    744 - 5 micron
    745 - 10 micron
    746 - 15 micron
[3] WW  - Length of cartridge, in inches
          40
          60
    XXX - Removal rating 
          001 - 1 micron
          002 - 2 micron
          005 - 5 micron
          010 - 10 micron
          015 - 15 micron
          025 - 25 micron
          040 - 40 micron
          070 - 70 micron
    Y   - End o-ring type
          A - Silicone
          B - Fluorocarbon
          C - EPR
          D - Nitrile
    Z   - Packaging option (numbers of filters per box)
          01 - 1 pack
          04 - 4 pack
    Size: Filter elements are 40" or 60" long and 6.5" in diameter.
[4] Certified for a minimum flow of 65,000 L/day.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


NOTE: All Listed products from this facility are NSF Certified, whether or not they bear the
      NSF Mark.
NOTE: NSF has not conducted production control audits at this facility.  Product Listing is
      based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
Number of matching Manufacturers is 1
Number of matching Products is 15
Processing time was 0 seconds