These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=33450&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Nibco Inc. |  |
| World Headquarters | |
| 1516 Middlebury Street | |
| Elkhart, IN 46516-4740 | |
| United States | |
| 574-295-3000 | |
| Visit this company's website |
Facility : Jerome, ID
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[G] |
||||
| NIBCO/Chemtrol Flange 4551-A (Soc) | 1/2" - 2 1/2" | CLD 30 | PVC | |
| NIBCO/Chemtrol Flange 4551-2A (Spigot) | 1/2" - 2 1/2" | CLD 30 | PVC | |
| NIBCO/Chemtrol Flange 4551-3A (Thread) | 1/2" - 2 1/2" | CLD 30 | PVC | |
| NIBCO/Chemtrol Flange 5151-A (Soc) | 1/2" - 2 1/2" | C. HOT | CPVC | |
| NIBCO/Chemtrol Flange 5151-2A (Spigot) | 1/2" - 2 1/2" | C. HOT | CPVC | |
| NIBCO/Chemtrol Flange 5151-3A (Thread) | 1/2" - 2 1/2" | C. HOT | CPVC | |
| NIBCO/Chemtrol Fitting 4511 10" | >= 1/4" | CLD 30 | PVC | |
| NIBCO/Chemtrol Fitting 4511 12" | >= 1/4" | CLD 30 | PVC | |
| NIBCO/Chemtrol Fitting 4507 10" | >= 1/4" | CLD 30 | PVC | |
| NIBCO/Chemtrol Fitting 4507 12" | >= 1/4" | CLD 30 | PVC | |
| NIBCO/Chemtrol Fitting 4506 10" | >= 1/4" | CLD 30 | PVC | |
| NIBCO/Chemtrol Fitting 4506 12" | >= 1/4" | CLD 30 | PVC | |
| NIBCO/Chemtrol Fitting 5111 10" | >= 1/4" | C. HOT | CPVC | |
| NIBCO/Chemtrol Fitting 5111 12" | >= 1/4" | C. HOT | CPVC | |
| NIBCO/Chemtrol Fitting 5107 10" | >= 1/4" | C. HOT | CPVC | |
| NIBCO/Chemtrol Fitting 5107 12" | >= 1/4" | C. HOT | CPVC | |
| NIBCO/Chemtrol Fitting 5106 10" | >= 1/4" | C. HOT | CPVC | |
| NIBCO/Chemtrol Fitting 5106 12" | >= 1/4" | C. HOT | CPVC | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Lebanon, OH
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Manifolds [G] |
||||
| NIBCO PEX Manifold PM16-S | [1] | D. HOT | PEX | |
| NIBCO PEX Manifold PM8-S | [1] | D. HOT | PEX | |
| NIBCO®PEX Home Run Manifold PH8-V1-LF | [2] | D. HOT | MLTPL | |
| NIBCO®PEX Home Run Manifold PH16D-V1-LF | [2] | D. HOT | MLTPL | |
| NIBCO®PEX Home Run Manifold PH40D-V1-LF | [2] | D. HOT | MLTPL | |
| NIBCO®PEX Home Run Manifold PH40D-V2-LF | 1 1/4" | D. HOT | MLTPL | |
| NIBCO®PEX Home Run Manifold PH24D-V1-LF | [2] | D. HOT | MLTPL | |
| NIBCO®PEX Home Run Manifold PH32D-V1-LF | [2] | D. HOT | MLTPL | |
| NIBCO®PEX Home Run Manifold PH16-V1-LF | [2] | D. HOT | MLTPL | |
| NIBCO®PEX Home Run Manifold PH16-V2-LF | 1 1/4" | D. HOT | MLTPL | |
| NIBCO PEX Manifold PM6-S | [1] | D. HOT | PEX | |
[1] Manifold sizes: 1" center tube with 6, 8, or 16 (1/2") ports. [2] Includes sizes 3/4", 1", and 1 1/4". [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pipe/Tubing |
||||
| Dura-Poly XL[1] | 1/4" - 1 1/4" | D. HOT | PEX | |
| Radiant PEX[1] | 1/4" - 1 1/4" | D. HOT | PEX | |
| Radiantec Heating Pipe[1] | 1/4" - 1 1/4" | D. HOT | PEX | |
[1] Standard 61 Listing is for non-barrier tubing only. |
||||
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Facility : Stuarts Draft, VA
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings [G] |
||||
| 600 Reducing Couplings, C x C[1] [2] [3] | 1/8" - 8" | C. HOT | MLTPL | |
| 600-2 Fitting Reducer, FTG x C[2] [3] | 1/8" - 8" | C. HOT | MLTPL | |
| 600-DS Coupling, Dimpled Stop, C x C[2] [3] | 1/8" - 8" | C. HOT | MLTPL | |
| 600-RS Coupling, Rolled Stop, C x C[2] [3] | 1/8" - 4" | C. HOT | MLTPL | |
| 601 Coupling Without Stop[2] [3] | 1/4" - 8" | C. HOT | MLTPL | |
| 603 Female Adapter, C x F[2] [3] | 1/8" - 4" | C. HOT | MLTPL | |
| 603-2 Female Adapter FTG x F[2] [3] | 1/4" - 3" | C. HOT | MLTPL | |
| 604 Male Adapter, C x M[2] [3] | 1/8" - 4" | C. HOT | MLTPL | |
| 604-2 Male Adapter, FTG x M[2] [3] | 1/4" - 2 1/2" | C. HOT | MLTPL | |
| 604-F Flush Adapter, C x M[2] [3] | 1/2" - 3/4" | C. HOT | MLTPL | |
| 606 45° Elbow, C x C[2] [3] | 1/8" - 8" | C. HOT | MLTPL | |
| 606-2 45° Fitting Elbow, FTG x C[2] [3] | 1/4" - 3" | C. HOT | MLTPL | |
| 607 90° Elbow, C x C[2] [3] | 1/8" - 8" | C. HOT | MLTPL | |
| 607-2 90° Fitting Elbow, FTG x C[2] [3] | 1/8" - 4" | C. HOT | MLTPL | |
| 607-2-2 90° Fitting Elbow, FTG x FTG[2] [3] | 1/2" - 3" | C. HOT | MLTPL | |
| 607-2-2-LT 90° Fitting Elbow, Long Radius, FTG x FTG[2] [3] | 1/4" - 2" | C. HOT | MLTPL | |
| 607-2-I 90° Fitting Elbow, Intermediate Radius, FTG x R[2] [3] | 1/2" - 1" | C. HOT | MLTPL | |
| 607-2-LT 90° Fitting Elbow, Long Radius, FTG x C[2] [3] | 1/8" - 4" | C. HOT | MLTPL | |
| 607-I 90° Elbow, Intermediate Radius, C x C[2] [3] | 1/2" - 1" | C. HOT | MLTPL | |
| 607-LT 90° Elbow, Long Radius, C x C[2] [3] | 1/8" - 4" | C. HOT | MLTPL | |
| 611 Tee, C x C x C | 1/8" - 8" | C. HOT | MLTPL | |
| 611-2 Fitting Tee, C x FTG x C[2] | 1/2" & 3/4" | C. HOT | MLTPL | |
| 616 Plug, FTG[2] [3] | 3/8" - 3/4" | C. HOT | MLTPL | |
| 617 Cap, C[2] [3] | 1/8" - 4" | C. HOT | MLTPL | |
| 618 Flush Bushing, FTG x C[2] [3] | 1/8" - 2" | C. HOT | MLTPL | |
| 618-3 Flush Adapter, FTG x F[2] [3] | 1 1/2" x 1" | C. HOT | MLTPL | |
| 618-3 Flush Bushing | 1/8" - 1/2" | C. HOT | MLTPL | |
| 619 Air Chamber, FTG[2] | 1/2" | C. HOT | MLTPL | |
| 620-L Stub Out, FTG[2] | 1/2" - 3/4" | C. HOT | MLTPL | |
| 621 Venturi Insert[2] | 1/2" - 1 1/4" | C. HOT | MLTPL | |
| 633 W Union Assembly C x C[2] [3] | 1/4" - 1" | C. HOT | MLTPL | |
| 638 Return Bend, C x C[2] [3] | 1/8" - 2" | C. HOT | MLTPL | |
| 698 Suction Line P-Trap, C x C[2] [3] | 1/2" - 2" | C. HOT | MLTPL | |
| Companion Flange, Wrot, 672 C x Flange[2] [3] | 3/4" - 8" | C. HOT | MLTPL | |
| PC600 R P x P Reducer Coupling | 1/2" - 4" | C. HOT | MLTPL | |
| PC600-2 FTG x P Fitting Reducer | 1/2" - 4" | C. HOT | MLTPL | |
| PC600-DS P x P Dimple Stop Coupling | 1/2" - 4" | C. HOT | MLTPL | |
| PC600-RS P x P Roll Stop Coupling | 2 1/2" - 4" | C. HOT | MLTPL | |
| PC601 P x P Coupling without Stop | 1/2" - 4" | C. HOT | MLTPL | |
| PC603 P x F Adapter | 1/2"x3/8"-4"x4" | C. HOT | MLTPL | |
| PC604P PEX x P Adapter | 1/2" x 1/2"– 1" x 1" | C. HOT | MLTPL | |
| PC606 P x P 45° Elbow | 1/2" - 4" | C. HOT | MLTPL | |
| PC606-2 FTG x P 45° Elbow | 1/2" - 4" | C. HOT | MLTPL | |
| PC607 P x P 90° Elbow | 1/2" - 4" | C. HOT | MLTPL | |
| PC607-2 FTG x P 90° Fitting Elbow | 1/2" - 4" | C. HOT | MLTPL | |
| PC607-2LT FTG x P 90° Long Radius Fitting Elbow | 2 1/2" - 3" | C. HOT | MLTPL | |
| PC607-3 P x F 90° Elbow | 1/2" x 3/8"- 2" x 2" | C. HOT | MLTPL | |
| PC607-4 P x M 90° Elbow | 1/2" x 1/2"-2" x 2" | C. HOT | MLTPL | |
| PC607-LT P x P 90° Long Radius Elbow | 2 1/2" - 4" | C. HOT | MLTPL | |
| PC611 P x P x P Tee | 1/2" - 4" | C. HOT | MLTPL | |
| PC612 P x P x F Thread Tee | 2½"x2½"x¾"-4"x4"x2" | C. HOT | MLTPL | |
| PC617 P Tube Cap | 1/2" - 4" | C. HOT | MLTPL | |
| PC633 P x P Union | 1/2" - 2" | C. HOT | MLTPL | |
| PC633-4 P x M Union | 1/2" - 2" | C. HOT | MLTPL | |
| PC636 P x P Crossover Coupling | 1/2" - 2" | C. HOT | MLTPL | |
| PC641 Flange Adapter | 2 1/2" - 4" | C. HOT | MLTPL | |
| PC707-3-5 Press x F 90° Drop Elbow | 1/2" | C. HOT | MLTPL | |
| PC707-3-5 Press x F 90° Drop Elbow | 3/4" | C. HOT | MLTPL | |
| PC707-3-5A-S Press x Press 90° Drop Elbow | 1/2" | C. HOT | MLTPL | |
| PC741 Nibco Adapter Flange (P x Flange) | 1" - 2" | C. HOT | MLTPL | |
[1] May also include 'R' suffix.
[2] May also include one of the following prefixes: UCP, U, UTP, USP, UPP, UP, UMP, UHP,
UBP, PP, MPP, CP, MCP, C, CS, MCC, CL or CLC.
[3] May also include a '9' prefix.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : Reynosa, Tamaulipas, Mexico
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Valves and Related Fittings[G] |
||||
| Flange, Cast, 741-LF FNPTxFlange | 3/4" - 6" | C. HOT | BRONZE | |
| Flange, Cast, 771-LF FNPTxFlange | 1" - 6" | C. HOT | BRONZE | |
| Flange, Cast, 775-LF FNPTxFlange | 2" - 4" | C. HOT | BRONZE | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
NOTE: NSF has not conducted production control audits at this facility. Product Listing is
based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[G] |
||||
| 90° Drop Ear Elbow, Cast, 707-3-5-LF, C x F | 1/2" - 1" | C. HOT | MLTPL | |
| 90° Drop Ear Elbow, Cast, 707-3-5R-LF, C x F | 1/2" x 3/8" | C. HOT | MLTPL | |
| 90° Drop Ear Elbow, Cast, 707-3-5R-LF, C x F | 3/4" x 1/2" | C. HOT | MLTPL | |
| 90° Drop Ear Elbow, Cast, 707-5-LF, C x C | 1/2" - 3/4" | C. HOT | MLTPL | |
| 90° Drop Ear Elbow, Cast, 707-5A-LF, C x C | 1/2" - 3/4" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 703-5-LF, C x F | 1/2" - 3/4" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-5-LF, C x F | 1/2" x 3/8" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 3/8" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 2" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 1/4" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 3/4" x 1/2" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 3/4" x 1" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 1/2" - 1" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 1" x 3/4" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3-LF, C x F | 1/2" x 1/4" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3R-LF, C x F | 1/2" x 3/8" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-3R-LF, C x F | 1/2" x 3/4" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-4-LF, C x M | 2" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-4-LF, C x M | 1/2" - 1 1/2" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-4-LF, C x M | 3/4" x 1/2" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-6-LF, C | 3/4" | C. HOT | MLTPL | |
| 90° Elbow, Cast, 707-LF, C x C | 1 1/2" x 1" | C. HOT | MLTPL | |
| 90° Elbow,Cast, 707-4R-LF, C x M | 1/2" x 3/4" | C. HOT | MLTPL | |
| 90° Flanged Sink Elbow, Cast, 708-LF, C x F | 1/2" | C. HOT | MLTPL | |
| 90° Hy-Set Elbow, Cast, 707-3-5A-LF, C x F | 1/2" | C. HOT | MLTPL | |
| 90° Union Elbow Assembly, Cast, 707-4-6-LF, C x M | 3/4" | C. HOT | MLTPL | |
| 90° Union Elbow Assembly, Cast, 707-4-6-LF, C x M | 3/8" | C. HOT | MLTPL | |
| 90° Union Elbow Assembly, Cast, 707-4-6-LF, C x M | 1/2" | C. HOT | MLTPL | |
| 90° Union Elbow Assembly, Cast, 707-4-6-LF, C x M | 1" | C. HOT | MLTPL | |
| 90° Union Elbow Assembly, Cast, 707-6-LF, C x C | 3/4" | C. HOT | MLTPL | |
| 90° Union Elbow, Cast, 707-4-6-LF, M | 3/8" | C. HOT | MLTPL | |
| 90° Union Elbow, Cast, 707-4-6-LF, M | 3/4" | C. HOT | MLTPL | |
| 90° Union Elbow, Thread Piece, Cast, 707-4-6-LF, M | 1/2" | C. HOT | MLTPL | |
| 90° Union Elbow, Thread Piece, Cast, 707-4-6-LF, M | 1" | C. HOT | MLTPL | |
| 90° Union Tail Piece, 707-4-6-LF, C | 3/8" | C. HOT | MLTPL | |
| 90° Union Tail Piece, 707-4-6-LF, C | 1" | C. HOT | MLTPL | |
| 90° Union Tail Piece, 707-4-6-LF, C | 1/2" | C. HOT | MLTPL | |
| 90° Vent Elbow, Cast, 705-D-LF, C x C | 1/2" - 3/4" | C. HOT | MLTPL | |
| 90º Elbow, Cast, 707-3-LF, C x F | 1 1/2" | C. HOT | MLTPL | |
| 90º Elbow, Cast, 707-3-LF, C x F | 1 1/4" | C. HOT | MLTPL | |
| 90º Elbow, Cast, 707-3-LF, C x F | 1" x 1/2" | C. HOT | MLTPL | |
| 90º Elbow, Cast, 707-4-LF, C X M | 3/8" | C. HOT | MLTPL | |
| 90º Elbow, Cast, 707-LF, C x C | 1 1/4" x 3/4" | C. HOT | MLTPL | |
| 90º Union Elbow Assembly, Cast, 707-3-6-LF, C x F | 3/4" | C. HOT | MLTPL | |
| 90º Union Elbow Assembly, Cast, 707-3-6-LF, C x F | 1/2" | C. HOT | MLTPL | |
| 90º Union Elbow Assembly, Cast, 707-6-LF, C x C | 3/8" | C. HOT | MLTPL | |
| 90º Union Elbow Assembly, Cast, 707-6-LF, C x C | 1/2" | C. HOT | MLTPL | |
| 90º Union Elbow Assembly, Thread Piece Cast, 707-6-LF, C | 3/8" | C. HOT | MLTPL | |
| 90º Union Elbow Thread Piece, Cast, 707-3-6-LF, F | 3/4" | C. HOT | MLTPL | |
| 90º Union Elbow Thread Piece, Cast, 707-3-6-LF, F | 1/2" | C. HOT | MLTPL | |
| 90º Union Elbow, Cast, 707-6-LF, C | 1/2" | C. HOT | MLTPL | |
| 90º Union Tail Piece, Cast, 707-3-6-LF,C | 3/4" | C. HOT | MLTPL | |
| 90º Union Tail Piece, Cast, 707-4-6-LF, C | 1/2" | C. HOT | MLTPL | |
| Adapter, Cast, 703-2R-LF, Ftg x F | 1/2" x 1/4" | C. HOT | MLTPL | |
| Adapter, Cast, 703-2R-LF, Ftg x F | 1" x 3/4" | C. HOT | MLTPL | |
| Adapter, Cast, 703-2R-LF, Ftg x F | 3/4" x 1/2" | C. HOT | MLTPL | |
| Adapter, Cast, 703-LF, C x F | 1/2" x 1" | C. HOT | MLTPL | |
| Adapter, Cast, 703-LF, C x F | 1 1/4" x 3/4" | C. HOT | MLTPL | |
| Adapter, Cast, 703-LF, C x F | 1" x 1 1/2" | C. HOT | MLTPL | |
| Adapter, Cast, 703-LF, C x F | 3/4" x 3/8" | C. HOT | MLTPL | |
| Adapter, Cast, 704-LF, C x M | 3/4" x 1 1/4" | C. HOT | MLTPL | |
| Baseboard Tee, Cast, 705-LF, C x F x C | 1/2" x 1/8" x 1/2" | C. HOT | MLTPL | |
| Baseboard Tee, Cast, 705-LF, C x F x C | 1 1/4" x 1/8"x1 1/4" | C. HOT | MLTPL | |
| Baseboard Tee, Cast, 705-LF, C x F x C | 1" x 1/8" x 1" | C. HOT | MLTPL | |
| Baseboard Tee, Cast, 705-LF, C x F x C | 3/4" x 1/8" x 3/4" | C. HOT | MLTPL | |
| Cross, Cast, 735-LF, C x C x C x C | 1/2", 3/4", 1" | C. HOT | MLTPL | |
| Drain Cap Gasket, 701-D-LF | 1/2" | C. HOT | MLTPL | |
| Drain Coupling 701-D-LF, C x C | 3/4" | C. HOT | MLTPL | |
| Drain Coupling Assembly, Cast, 701-D-LF, C x C | 1/2" | C. HOT | MLTPL | |
| Drain Coupling, Cast, 701-D-LF, C x C | 1/2" | C. HOT | MLTPL | |
| Drop Adapter, Cast, 703-5B-LF, C x F | 1/2" | C. HOT | MLTPL | |
| Drop Ear Tee, Cast ,712-5-LF, C x C x F | 1/2" - 3/4" | C. HOT | MLTPL | |
| Drop Tee, Cast, 711-5-LF, C x C x C | 1/2" | C. HOT | MLTPL | |
| Fitting Adapter, Cast, 704-2-LF, FTG x M | 2" | C. HOT | MLTPL | |
| Fitting Adapter, Cast, 704-2-LF, FTG x M | 3/4" x 1/2" | C. HOT | MLTPL | |
| Fitting Adapter, Cast, 704-2-LF, FTG x M | 1 1/4" | C. HOT | MLTPL | |
| Fitting Union Assembly, Cast, 733-3-LF, C x F | 3/8" | C. HOT | MLTPL | |
| Fitting Union, Cast, 733-3-LF, C x F | 1/4" | C. HOT | MLTPL | |
| Fitting Union, Cast, 733-3-LF, F | 3/8" | C. HOT | MLTPL | |
| PC707-3-5 Press x F 90° Drop Elbow | 3/4" | C. HOT | MLTPL | |
| PC707-3-5 Press x F 90° Drop Elbow | 1/2" | C. HOT | MLTPL | |
| PC707-3-5A Prs x Prs 90° High Ear | 1/2" | C. HOT | MLTPL | |
| Tee, 714-LF, C x FC x C | 1/2" x 3/4" x 1/2" | C. HOT | MLTPL | |
| Tee, 714-LF, C x FC x C | 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 710-3-4-LF, F x M x C | 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 710-3-LF, F x F x C | 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 710-3-LF, F x F x C | 3/4" x 3/4" x 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 710-3RR-LF, F x F x C | 3/4" x 1/2" x 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 710-3RR-LF, F x F x C | 3/4" x 1/8" x 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 711-LF, C x C x C | 1 1/4" x 1/2" x 1" | C. HOT | MLTPL | |
| Tee, Cast, 712-BH-LF, C x C x F | 1/2" x 1/2" x 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 1 1/4" x 1 1/4"x3/4" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 2" x 2" x 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 2" x 2" x 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 1 1/2" x 1 1/2"x3/4" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 1/2" x 1/2" x 3/8" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 1/2" - 1" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 3/4" x 3/4" x 3/8" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 1 1/2" x 1 1/2"x1/2" | C. HOT | MLTPL | |
| Tee, Cast, 712-LF, C x C x F | 2" x 2" x 1" | C. HOT | MLTPL | |
| Tee, Cast, 712R-LF, C x C x F | 1" x 1" x 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 712R-LF, C x C x F | 1/2" x 1/2" x 1/4" | C. HOT | MLTPL | |
| Tee, Cast, 712R-LF, C x C x F | 1 1/4" x 1 1/4" x 1" | C. HOT | MLTPL | |
| Tee, Cast, 712R-LF, C x C x F | 3/4" x 3/4" x 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 712R-LF, C x C x F | 1" x 1" x 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 712R-LF, C x C x F | 1 1/4"x1 1/4"x1/2" | C. HOT | MLTPL | |
| Tee, Cast, 712R-LF, C x C x F | 1" x 1" x 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 713-LF, C x C x M | 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 714-LF, C x F x C | 1/2" - 1" | C. HOT | MLTPL | |
| Tee, Cast, 714-LF, C x F x C | 3/4" x 1/2" x 3/4" | C. HOT | MLTPL | |
| Tee, Cast, 714-LF, C x F x C | 1" x 1 1/2" x 1" | C. HOT | MLTPL | |
| Tee, Cast, 714RR-LF, C x F x C | 1/2" x 3/4" x 1/2" | C. HOT | MLTPL | |
| Tee, Cast, 714RR-LF, C x F x C | 1" x 3/4" x 1" | C. HOT | MLTPL | |
| Union Assembly, Cast, 733-4-LF, C x M | 3/8", 1/4" | C. HOT | MLTPL | |
| Union Tail Piece, 707-6-LF, C | 3/4" | C. HOT | MLTPL | |
| Union Tail Piece, 707-6-LF, C | 3/4" | C. HOT | MLTPL | |
| Union Tail Piece, 707-6-LF, C | 1/2" | C. HOT | MLTPL | |
| Union Tail Piece, 733-3-LF, C | 1/4" | C. HOT | MLTPL | |
| Union Tail Piece, 733-3-LF, C | 3/8" | C. HOT | MLTPL | |
| Union Tail Piece, 733-4-LF, C | 3/8" | C. HOT | MLTPL | |
| Union Tail Piece, 733-4-LF, C | 1/4" | C. HOT | MLTPL | |
| Union, Cast, 733-3-LF, C x F | 1/2" - 2 1/2" | C. HOT | MLTPL | |
| Union, Cast, 733-3-LF, F | 1/4" | C. HOT | MLTPL | |
| Union, Cast, 733-4-LF, C x M | 1/2" - 2 1/2" | C. HOT | MLTPL | |
| Union, Cast, 733-4-LF, M | 1/4" | C. HOT | MLTPL | |
| Union, Cast, 733-4-LF, M | 3/8" | C. HOT | MLTPL | |
| Union, Cast, 733-LF, C x C | 1 1/4" - 3" | C. HOT | MLTPL | |
| Vent Elbow Assembly, Cast, 705-D-LF, C x C | 1" | C. HOT | MLTPL | |
| Vent Elbow, Cast, 705-D-LF, C x C | 1" | C. HOT | MLTPL | |
| Wye, Cast, 749-LF, C x C x C | 1/2" - 1 1/4" | C. HOT | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
NOTE: NSF has not conducted production control audits at this facility. Product Listing is
based on type testing [ISO/IEC Guide 2: 1996(E/F/R) 14.5].
Facility : Taichung, Taiwan
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Valves[G] |
||||
| 4660S | 1/2" - 4" | CLD 23 | MLTPL | |
| 4660T | 1/2" - 4" | CLD 23 | MLTPL | |
| 4770 (CTS) Compact Ball Valves | 1/2" - 2" | C. HOT | CPVC | |
| S45CE-E | 1/2" - 2" | CLD 23 | MLTPL | |
| S45CE-V | 1/2" - 2" | CLD 23 | MLTPL | |
| T45CE-E | 1/2" - 2" | CLD 23 | MLTPL | |
| T45CE-V | 1/2" - 2" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Number of matching Manufacturers is 1
Number of matching Products is 232
Processing time was 0 seconds