These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=3X440&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Ebara International Corporation | |
| 1651 Cedar Line Drive | |
| Rock Hill, SC 29730 | |
| United States | |
| 803-327-5005 | |
| Visit this company's website |
Facility : Sparks, NV
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps[1] [G] |
||||
| 2CDU(A)(B)6(C)(D)(E)[2] | 1¼" x 1" - 1½" x 1" | CLD 23 | MLTPL | |
| 3U(A)(B)(C)(D)(E)(F)(I)[3] [4] | 2" x 1¼" - 3" x 2½" | CLD 23 | MLTPL | |
| 3U4(A)(B)(C)(D)(E)(F)(I)[3] [4] | 2 1/4" x 1 1/2" | CLD 23 | MLTPL | |
| CDU(A)(B)(C)(D)(E)(F)[5] | 1¼" x 1" - 1½" x 1" | CLD 23 | MLTPL | |
| JEU(A)(B)(C)(D)(E)[6] | 1 1/4" x 1" | CLD 23 | MLTPL | |
[1] Sizes are expressed as suction x discharge.
[2] 2CDU Models:
A - Casing Size/Impeller Size
70/206
70/306
120/306
200/506
B - Motor horsepower (hp)
20 - 2
30 - 3
50 - 5
C - Motor Enclosure
T - TEFC (Totally enclosed fan cooled)
D - ODP (Open drip proof)
D - Phase/Volt
3 - Three phase, 230/460 volt
1 - Single phase, 115/230 volt
E - Seal type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
[3] 3U and 3U4 Models:
A - Speed
None - 3450 RPM
4 - 1725 RPM
B - Discharge size
32 - 1 1/4"
40 - 1 1/2"
50 - 2"
65 - 2 1/2"
C - Impeller performance code
125
160
200
"A" and "B" in the model name designate a different design in the impeller.
D - Motor horsepower (hp)
30 - 3
50 - 5
75 - 7.5
100 - 10
150 - 15
200 - 20
250 - 25
300 - 30
E - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
F - Phase
1 - Single phase
3 - Three phase
I - Mechanical Seal Type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
[4] 3U model Certification does not include flange gaskets.
[5] CDU Models:
A - Nominal motor speed
Blank - 3600 rpm
4 - 1750 rpm
B - Casing Size/Impeller Size
70/1
70/3
70/5
120/1
120/3
120/5
200/1
200/3
200/5
C - Motor horsepower (hp)
7 - 0.75
10 - 1
15 - 1.5
20 - 2
30 - 3
D - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
E - Motor Phase
1 - Single phase
3 - Three phase
F - Mechanical Seal Type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
[6] JEU Models:
A - Housing and Impeller Number
806
1506
B - Motor horsepower (hp)
7 - 3/4
10 - 1
15 - 1/2
20- 2
C - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
D - Phase
1 - Single phase
3 - Three phase
E - Seal type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Rock Hill, SC
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps[1] [G] |
||||
| 2CDU(A)(B)6(C)(D)(E)[2] | 1 1/4"x1"-1 1/2"x1" | CLD 23 | MLTPL | |
| 3U(A)(B)(C)(D)(E)(F)(I)[3] [4] | 2"x1 1/4"-3"x2 1/2" | CLD 23 | MLTPL | |
| 3U4(A)(B)(C)(D)(E)(F)(I)[3] [4] | 2 1/4" x 1 1/2" | CLD 23 | MLTPL | |
| CDU(A)(B)(C)(D)(E)(F)[5] | 1 1/4"x1"-1 1/2"x1" | CLD 23 | MLTPL | |
| JEU(A)(B)(C)(D)(E)[6] | 1 1/4" x 1" | CLD 23 | MLTPL | |
[1] Size is expressed as suction x discharge.
[2] 2CDU Models
A - Casing Size/Impeller Size
70/206
70/306
120/306
200/506
B - Motor horsepower (hp)
20 - 2
30 - 3
50 - 5
C - Motor Enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
D - Phase/Volt
1 - Single phase, 115/230 volt
3 - Three phase, 230/460 volt
E - Seal type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
[3] 3U and 3U4 Models
A - Speed
None - 3450 RPM
4 - 1725 RPM
B - Discharge size
32 - 1 1/4"
40 - 1 1/2"
50 - 2"
65 - 2 1/2"
C - Impeller performance code
125
160
200
"A" and "B" in the model name designate a different design in the impeller.
D - Motor horsepower (hp)
30 - 3
50 - 5
75 - 7.5
100- 10
150 - 15
200 - 20
250 - 25
300 - 30
E - Motor enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
F - Phase
1 - Single phase
3 - Three phase
I - Mechanical Seal Type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
4 models indicate a 4 pole motor as opposed to the standard 2 pole motor.
[4] 3U model Certification does not include flange gaskets.
[5] CDU Models
a - Nominal motor speed
Blank - 3600 rpm
4 - 1750 rpm
B - Casing size/impeller size
70/1
70/3
70/5
120/1
120/3
120/5
200/1
200/3
200/5
C - Motor horsepower (hp)
7 - 0.75
10 - 1
15 - 1.5
20 - 2
30 - 3
D - Motor enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
E - Motor phase
1 - single phase
3 - three phase
F - Mechanical seal type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
[6] JEU Models
A - Housing and impeller number
806
1506
B - Motor horsepower (hp)
7 - 3/4
10 - 1
15 - 1/2
20- 2
C - Motor enclosure
D - ODP (Open drip proof)
T - TEFC (Totally enclosed fan cooled)
D - Phase
1 - Single phase
3 - Three phase
E - Seal type
C - Carbon/Ceramic/Viton
G - Carbon/Ceramic/NBR
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Brendola (VI), Italy
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps[1] [2] [G] |
||||
| EVMU32-(W)F (X)(Y)(Z) S | 2 ½" x 2 ½", 4" x 4" | CLD 23 | MLTPL | |
| EVMU45-(W)F (X)(Y)(Z) S | 3" x 3" | CLD 23 | MLTPL | |
| EVMU64-(W)F (X)(Y)(Z) S | 2 ½" x 2 ½", 4" x 4" | CLD 23 | MLTPL | |
| EVMUL32-(W)(R) F (X)(Y)(Z) S | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMUL45-(W)(R) F (X)(Y)(Z) S | 3" x 3" | CLD 23 | MLTPL | |
| EVMUL64-(W)(R) F (X)(Y)(Z) S | 4" x 4" | CLD 23 | MLTPL | |
[1] Size is expressed as suction end x discharge end.
[2] W - Number of impellers
1-18
R - Number of reduced diameter impellers (32, 45, and 64 models only)
0-18
X - Horsepower of motor
0050 - 1/2HP
0075 - 3/4HP
0100 - 1.0HP
0150 - 1.5HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
Y - Motor type
D - Open drip proof (ODP)
T - Totally enclosed fan cooled (TEFC)
Z - Motor phase
1 - Single phase
3 - Three phase
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Cles (TN), Italy
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pumps[1] [2] [G] |
||||
| EVMU10-(W) F (X)(Y)(Z) S | 2" x 2" | CLD 23 | MLTPL | |
| EVMU18-(W) F (X)(Y)(Z) S | 2" x 2" | CLD 23 | MLTPL | |
| EVMU3-(W) F (X)(Y)(Z) S | 2 1/2" x 2 1/2" | CLD 23 | MLTPL | |
| EVMU5-(W) F (X)(Y)(Z) S | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMUL10-(W) F (X)(Y)(Z) S | 2" x 2" | CLD 23 | MLTPL | |
| EVMUL18-(W) F (X)(Y)(Z) S | 2" x 2" | CLD 23 | MLTPL | |
| EVMUL3-(W) F (X)(Y)(Z) S | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
| EVMUL5-(W) F (X)(Y)(Z) S | 1 1/4" x 1 1/4" | CLD 23 | MLTPL | |
[1] Size is expressed as suction end x discharge end.
[2] W - Number of impellers
1 - 18
X - Horsepower of motor
0050 - 1/2 HP
0075 - 3/4 HP
0100 - 1.0 HP
0150 - 1.5 HP
0200 - 2.0 HP
0300 - 3.0 HP
0500 - 5.0 HP
0750 - 7.5 HP
1000 - 10 HP
1500 - 15 HP
2000 - 20 HP
2500 - 25 HP
3000 - 30 HP
4000 - 40 HP
5000 - 50 HP
Y - Motor Type
D - Open Drip Proof (ODP)
T - Totally Enclosed Fan Cooled (TEFC)
Z - Motor phase
1 - Single phase
3 - Three phase
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds