These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=3X440&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Ebara International Corporation 
1651 Cedar Line Drive
Rock Hill, SC 29730 
United States 
803-327-5005
Visit this company's website

Facility : Sparks, NV

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pumps[1] [G]
  2CDU(A)(B)6(C)(D)(E)[2] 1¼" x 1" - 1½" x 1" CLD 23 MLTPL
  3U(A)(B)(C)(D)(E)(F)(I)[3] [4] 2" x 1¼" - 3" x 2½" CLD 23 MLTPL
  3U4(A)(B)(C)(D)(E)(F)(I)[3] [4] 2 1/4" x 1 1/2" CLD 23 MLTPL
  CDU(A)(B)(C)(D)(E)(F)[5] 1¼" x 1" - 1½" x 1" CLD 23 MLTPL
  JEU(A)(B)(C)(D)(E)[6] 1 1/4" x 1" CLD 23 MLTPL 

[1] Sizes are expressed as suction x discharge.
[2] 2CDU Models:
    A - Casing Size/Impeller Size
        70/206
        70/306
        120/306
        200/506
    B - Motor horsepower (hp)
        20 - 2
        30 - 3
        50 - 5
    C - Motor Enclosure
        T - TEFC (Totally enclosed fan cooled)
        D - ODP (Open drip proof) 
    D - Phase/Volt
        3 - Three phase, 230/460 volt
        1 - Single phase, 115/230 volt
    E - Seal type
        C - Carbon/Ceramic/Viton
        G - Carbon/Ceramic/NBR
[3] 3U and 3U4 Models:
    A - Speed
        None - 3450 RPM
        4 - 1725 RPM
    B - Discharge size
        32 - 1 1/4"
        40 - 1 1/2"
        50 - 2"
        65 - 2 1/2" 
    C - Impeller performance code
        125
        160
        200
    "A" and "B" in the model name designate a different design in the impeller.
    D - Motor horsepower (hp)
        30  - 3
        50  - 5
        75  - 7.5
        100 - 10
        150 - 15
        200 - 20
        250 - 25
        300 - 30
    E - Motor Enclosure
        D - ODP (Open drip proof)
        T - TEFC (Totally enclosed fan cooled)
    F - Phase
        1 - Single phase
        3 - Three phase
    I - Mechanical Seal Type
        C - Carbon/Ceramic/Viton
        G - Carbon/Ceramic/NBR
[4] 3U model Certification does not include flange gaskets.
[5] CDU Models:
    A - Nominal motor speed
        Blank - 3600 rpm
        4     - 1750 rpm
    B - Casing Size/Impeller Size
        70/1
        70/3
        70/5
        120/1
        120/3
        120/5
        200/1
        200/3
        200/5
    C - Motor horsepower (hp)
        7  - 0.75
        10 - 1
        15 - 1.5
        20 - 2
        30 - 3
    D - Motor Enclosure
        D - ODP (Open drip proof)
        T - TEFC (Totally enclosed fan cooled)
    E - Motor Phase
        1 - Single phase
        3 - Three phase
    F - Mechanical Seal Type
        C - Carbon/Ceramic/Viton
        G - Carbon/Ceramic/NBR
[6] JEU Models:
    A - Housing and Impeller Number
        806
        1506
    B - Motor horsepower (hp)
        7 - 3/4
        10 - 1
        15 - 1/2
        20- 2
    C - Motor Enclosure
        D - ODP (Open drip proof)
        T - TEFC (Totally enclosed fan cooled)
    D - Phase
        1 - Single phase
        3 - Three phase
    E - Seal type
        C - Carbon/Ceramic/Viton
        G - Carbon/Ceramic/NBR
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Rock Hill, SC

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pumps[1] [G]
  2CDU(A)(B)6(C)(D)(E)[2] 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
  3U(A)(B)(C)(D)(E)(F)(I)[3] [4] 2"x1 1/4"-3"x2 1/2" CLD 23 MLTPL
  3U4(A)(B)(C)(D)(E)(F)(I)[3] [4] 2 1/4" x 1 1/2" CLD 23 MLTPL
  CDU(A)(B)(C)(D)(E)(F)[5] 1 1/4"x1"-1 1/2"x1" CLD 23 MLTPL
  JEU(A)(B)(C)(D)(E)[6] 1 1/4" x 1" CLD 23 MLTPL 

[1] Size is expressed as suction x discharge.
[2] 2CDU Models 
    A - Casing Size/Impeller Size 
        70/206 
        70/306 
        120/306 
        200/506 
    B - Motor horsepower (hp) 
        20 - 2 
        30 - 3 
        50 - 5 
    C - Motor Enclosure 
        D - ODP (Open drip proof)
        T - TEFC (Totally enclosed fan cooled)  
    D - Phase/Volt 
        1 - Single phase, 115/230 volt 
        3 - Three phase, 230/460 volt 
    E - Seal type 
        C - Carbon/Ceramic/Viton 
        G - Carbon/Ceramic/NBR
[3] 3U and 3U4 Models
    A - Speed 
        None - 3450 RPM 
        4    - 1725 RPM 
    B - Discharge size 
        32 - 1 1/4" 
        40 - 1 1/2" 
        50 - 2"
        65 - 2 1/2" 
    C - Impeller performance code 
        125 
        160 
        200 
    "A" and "B" in the model name designate a different design in the impeller.
    D - Motor horsepower (hp) 
        30 - 3 
        50 - 5 
        75 - 7.5 
        100- 10 
        150 - 15 
        200 - 20 
        250 - 25 
        300 - 30 
    E - Motor enclosure 
        D - ODP (Open drip proof) 
        T - TEFC (Totally enclosed fan cooled) 
    F - Phase 
        1 - Single phase 
        3 - Three phase 
    I - Mechanical Seal Type 
        C - Carbon/Ceramic/Viton 
        G - Carbon/Ceramic/NBR
    4 models indicate a 4 pole motor as opposed to the standard 2 pole motor.
[4] 3U model Certification does not include flange gaskets.
[5] CDU Models 
    a - Nominal motor speed 
        Blank - 3600 rpm 
        4     - 1750 rpm 
    B - Casing size/impeller size 
        70/1 
        70/3 
        70/5 
        120/1 
        120/3 
        120/5 
        200/1
        200/3 
        200/5 
    C - Motor horsepower (hp) 
        7  - 0.75 
        10 - 1 
        15 - 1.5 
        20 - 2 
        30 - 3 
    D - Motor enclosure 
        D - ODP (Open drip proof) 
        T - TEFC (Totally enclosed fan cooled) 
    E - Motor phase   
        1 - single phase 
        3 - three phase 
    F - Mechanical seal type 
        C - Carbon/Ceramic/Viton 
        G - Carbon/Ceramic/NBR
[6] JEU Models
    A - Housing and impeller number 
        806 
        1506 
    B - Motor horsepower (hp) 
        7 - 3/4 
        10 - 1 
        15 - 1/2 
        20- 2 
    C - Motor enclosure 
        D - ODP (Open drip proof) 
        T - TEFC (Totally enclosed fan cooled) 
    D - Phase 
        1 - Single phase 
        3 - Three phase 
    E - Seal type 
        C - Carbon/Ceramic/Viton 
        G - Carbon/Ceramic/NBR
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Brendola (VI), Italy

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pumps[1] [2] [G]
  EVMU32-(W)F (X)(Y)(Z) S 2 ½" x 2 ½", 4" x 4" CLD 23 MLTPL
  EVMU45-(W)F (X)(Y)(Z) S 3" x 3" CLD 23 MLTPL
  EVMU64-(W)F (X)(Y)(Z) S 2 ½" x 2 ½", 4" x 4" CLD 23 MLTPL
  EVMUL32-(W)(R) F (X)(Y)(Z) S 2 1/2" x 2 1/2" CLD 23 MLTPL
  EVMUL45-(W)(R) F (X)(Y)(Z) S 3" x 3" CLD 23 MLTPL
  EVMUL64-(W)(R) F (X)(Y)(Z) S 4" x 4" CLD 23 MLTPL 

[1] Size is expressed as suction end x discharge end.
[2] W - Number of impellers 
        1-18 
    R - Number of reduced diameter impellers (32, 45, and 64 models only) 
        0-18 
    X - Horsepower of motor 
        0050 - 1/2HP 
        0075 - 3/4HP 
        0100 - 1.0HP 
        0150 - 1.5HP 
        0200 - 2.0 HP
        0300 - 3.0 HP 
        0500 - 5.0 HP 
        0750 - 7.5 HP 
        1000 - 10 HP 
        1500 - 15 HP 
        2000 - 20 HP 
        2500 - 25 HP 
        3000 - 30 HP 
        4000 - 40 HP 
        5000 - 50 HP 
    Y - Motor type 
        D - Open drip proof (ODP) 
        T - Totally enclosed fan cooled (TEFC) 
    Z - Motor phase 
        1 - Single phase 
        3 - Three phase
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Cles (TN), Italy

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pumps[1] [2] [G]
  EVMU10-(W) F (X)(Y)(Z) S 2" x 2" CLD 23 MLTPL
  EVMU18-(W) F (X)(Y)(Z) S 2" x 2" CLD 23 MLTPL
  EVMU3-(W) F (X)(Y)(Z) S 2 1/2" x 2 1/2" CLD 23 MLTPL
  EVMU5-(W) F (X)(Y)(Z) S 1 1/4" x 1 1/4" CLD 23 MLTPL
  EVMUL10-(W) F (X)(Y)(Z) S 2" x 2" CLD 23 MLTPL
  EVMUL18-(W) F (X)(Y)(Z) S 2" x 2" CLD 23 MLTPL
  EVMUL3-(W) F (X)(Y)(Z) S 1 1/4" x 1 1/4" CLD 23 MLTPL
  EVMUL5-(W) F (X)(Y)(Z) S 1 1/4" x 1 1/4" CLD 23 MLTPL 

[1] Size is expressed as suction end x discharge end.
[2] W - Number of impellers 
        1 - 18  
    X - Horsepower of motor 
        0050 - 1/2 HP 
        0075 - 3/4 HP 
        0100 - 1.0 HP 
        0150 - 1.5 HP 
        0200 - 2.0 HP 
        0300 - 3.0 HP 
        0500 - 5.0 HP 
        0750 - 7.5 HP 
        1000 - 10 HP 
        1500 - 15 HP 
        2000 - 20 HP 
        2500 - 25 HP 
        3000 - 30 HP 
        4000 - 40 HP 
        5000 - 50 HP 
    Y - Motor Type 
        D - Open Drip Proof (ODP) 
        T - Totally Enclosed Fan Cooled (TEFC) 
    Z - Motor phase 
        1 - Single phase 
        3 - Three phase
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds