These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=49950&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Watts Regulator Company | |
| 815 Chestnut Street | |
| North Andover, MA 01845 | |
| United States | |
| 978-689-6165 | |
| Visit this company's website |
Facility : # 1 Zhejiang, China
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Supply Stops |
||||
| LF-PBQT-090[1] [3] [G] | ||||
| LF-PBQT-100[1] [3] [G] | ||||
| LF-PBQT-110[1] [3] [G] | ||||
| LF-PBQT-113[1] [3] [G] | ||||
| LF-PBQT-118[1] [3] [G] | ||||
| LF-PBQT-122[1] [3] [G] | ||||
| LF-PBQT-210[1] [3] [G] | ||||
| LF-PBQT-213[1] [3] [G] | ||||
| LF-PBQT-218[1] [3] [G] | ||||
| LF-PBQT-222[1] [3] [G] | ||||
| LF-PBQT-290[1] [3] [G] | ||||
| LF-PBQT-310[1] [3] [G] | ||||
| LF-PBQT-600[1] [3] [G] | ||||
| LF-PBQT-610[1] [3] [G] | ||||
| LF-PBQT-622[1] [3] [G] | ||||
| LF-PBQT-710[1] [3] [G] | ||||
| LF-PBQT-722[1] [3] [G] | ||||
| LF-PBQT-810[1] [3] [G] | ||||
| LF-PBQTB-250[1] [3] [G] | ||||
| LF-PBQTC-270[1] [3] [G] | ||||
| LF-PBQTC-670[1] [3] [G] | ||||
| LF-PBQTP-650[1] [3] [G] | ||||
| LF-PBQTR-615[1] [3] [G] | ||||
| LF389000X[1] [3] [G] | ||||
| LF389200X[1] [3] [G] | ||||
| LF389400X[1] [3] [G] | ||||
| LF88900X[1] [3] [G] | ||||
| LF88901X[1] [3] [G] | ||||
| LF89020X[1] [3] [G] | ||||
| LF89030X[1] [3] [G] | ||||
| LF89120X[1] [3] [G] | ||||
| LF89121X[1] [3] [G] | ||||
| LF89201X[1] [3] [G] | ||||
| LF89215X[1] [3] [G] | ||||
| LF89241X[1] [3] [G] | ||||
| LF89400X[1] [3] [G] | ||||
| LF89401X[1] [3] [G] | ||||
| LF89415X[1] [3] [G] | ||||
| LF89420X[1] [3] [G] | ||||
| LF89430X[1] [3] [G] | ||||
| LF89501X[1] [3] [G] | ||||
| LF89601X[1] [3] [G] | ||||
| LFBV38900X[1] [3] [G] | ||||
| LFBV38905X[1] [3] [G] | ||||
| LFBV38940X[1] [3] [G] | ||||
| LFBV38945X[1] [3] [G] | ||||
| LFBV88900X[1] [3] [G] | ||||
| LFBV88901X[1] [3] [G] | ||||
| LFBV88915X[1] [3] [G] | ||||
| LFBV89000X[1] [3] [G] | ||||
| LFBV89001X[1] [3] [G] | ||||
| LFBV89015X[1] [3] [G] | ||||
| LFBV89020X[1] [3] [G] | ||||
| LFBV89021X[1] [3] [G] | ||||
| LFBV89030X[1] [3] [G] | ||||
| LFBV89031X[1] [3] [G] | ||||
| LFBV89100X[1] [3] [G] | ||||
| LFBV89101X[1] [3] [G] | ||||
| LFBV89115X[1] [3] [G] | ||||
| LFBV89120X[1] [3] [G] | ||||
| LFBV89121X[1] [3] [G] | ||||
| LFBV89130X[1] [3] [G] | ||||
| LFBV89131X[1] [3] [G] | ||||
| LFBV89200X[1] [3] [G] | ||||
| LFBV89201X[1] [3] [G] | ||||
| LFBV89215X[1] [3] [G] | ||||
| LFBV89220X[1] [3] [G] | ||||
| LFBV89221X[1] [3] [G] | ||||
| LFBV89230X[1] [3] [G] | ||||
| LFBV89240X[1] [3] [G] | ||||
| LFBV89241X[1] [3] [G] | ||||
| LFBV89250X[1] [3] [G] | ||||
| LFBV89251X[1] [3] [G] | ||||
| LFBV89400X[1] [3] [G] | ||||
| LFBV89420X[1] [3] [G] | ||||
| LFBV89421X[1] [3] [G] | ||||
| LFDV389400X[1] [3] [G] | ||||
| LFDV38941X[1] [3] [G] | ||||
| LFDV389431X[1] [3] [G] | ||||
| LFWPAS-2PB[1] [3] [G] | ||||
| LFWPAS-9PB[1] [3] [G] | ||||
| LFWPSS-1B[1] [3] [G] | ||||
| LFWPSS-3PB[1] [3] [G] | ||||
| LFWPSS-8PB[1] [3] [G] | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] Suffix "X"
1 - Rough brass
3 - Chrome plated
LK - Loose key system
PB - Polished brass
SD - Screw driver stem
WEL - With escutcheon and less compression nut
[3] Suffix "X"
3 – Chrome plated
LK – Loose key stem
LN – Less nut
PB – Polished brass
SD – Screw driver stem
WEL – With escutcheon and less compression nut
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : # 2 Zheijiang, China
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Flexible Plumbing Connectors |
||||
|
Reinforced Vinyl Dishwasher Supply Lines[1] [G] |
||||
| FS-CDC-P-CE[2] | ||||
| FS-CDC-P-FE[2] | ||||
| FS-CDC-S-CC[2] | ||||
| FS-CDC-S-CE[2] | ||||
| FS-CDC-S-FE[2] | ||||
| FSDW60 | ||||
| FSDW72 | ||||
| LF-CDC-A-CE Antimicrobial Connector[2] | ||||
| LF-CDC-S-CE[G] | ||||
| MFS SCC60-66EPB | ||||
| MFS SCC72-66EPB | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] FS - FloodSafe
CDC - Dishwasher connector
CFC - Faucet connector
CIC - Ice maker supply line
CTC - Toilet connector
A - Thread weave with coextruded clear vinyl with antimicrobial additive
P - Reinforced vinyl hose
S - Stainless steel braid over reinforced vinyl hose
Type of connection from supply (maximum inlet size 1/2"):
C - Compression end fitting
F - FIP end fitting
T - Fine thread FIP end fitting
Type of connection to fixture (maximum outlet size 7/8"):
B - Ballcock end fitting
C - Compression end fitting
E - MIP elbow end fitting
F - FIP end fitting
O - OD compression end fitting
Hose has I.D. of 0.28" and length of 6-72".
FS may be used as a prefix or be used after the first letter of the trade name that
begins with M or T to indicate the use of a Floodsafe check valve on the supply side end.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
|
Reinforced Vinyl Faucet Supply Lines[1] [G] |
||||
| LF-AMF20-68 Antimicrobial Connector | ||||
| LF-CFC-A-CF Antimicrobial Connector[2] | ||||
| LF-CFC-P-CC[2] | ||||
| LF-CFC-P-CF[2] | ||||
| LF-CFC-P-CO[2] | ||||
| LF-CFC-P-FF[2] | ||||
| LF-CFC-P-TF[2] | ||||
| LF-CFC-S-CC[2] | ||||
| LF-CFC-S-CF[2] | ||||
| LF-CFC-S-CO[2] | ||||
| LF-CFC-S-FF[2] | ||||
| LF-CFC-S-TF[2] | ||||
| LF-F12 | ||||
| LF-F16 | ||||
| LF-F16-88 | ||||
| LF-F20 | ||||
| LF-F20-88 | ||||
| LF-FC20-88 | ||||
| LF-M S12-88 | ||||
| LF-M S20-88 | ||||
| LF-M SC12-68 | ||||
| LF-M SC16-68 | ||||
| LF-M SC20-68 | ||||
| LF-M SC36-68 | ||||
| LF-SM12-68 Antimicrobial Connector | ||||
| LF-SM20-68 Antimicrobial Connector | ||||
| LF-TS12-88 Stainless Steel | ||||
| LF-TS20-88 Stainless Steel | ||||
| LF-TSC12-68 Stainless Steel | ||||
| LF-TSC16-68 Stainless Steel | ||||
| LF-TSC20-68 Stainless Steel | ||||
| LF-TSC30-68PB Stainless Steel | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] FS - FloodSafe
CDC - Dishwasher connector
CFC - Faucet connector
CIC - Ice maker supply line
CTC - Toilet connector
A - Thread weave with coextruded clear vinyl with antimicrobial additive
P - Reinforced vinyl hose
S - Stainless steel braid over reinforced vinyl hose
Type of connection from supply (maximum inlet size 1/2"):
C - Compression end fitting
F - FIP end fitting
T - Fine thread FIP end fitting
Type of connection to fixture (maximum outlet size 7/8"):
B - Ballcock end fitting
C - Compression end fitting
E - MIP elbow end fitting
F - FIP end fitting
O - OD compression end fitting
Hose has I.D. of 0.28" and length of 6-72".
FS may be used as a prefix or be used after the first letter of the trade name that
begins with M or T to indicate the use of a Floodsafe check valve on the supply side end.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
|
Reinforced Vinyl Icemaker Supply Lines |
||||
| CIC-P-CC[1] [3] [G] | ||||
| CIC-S-CC[1] [3] [G] | ||||
| FS-CIC-P-CC[1] [3] [G] | ||||
| FS-CIC-S-CC[1] [3] [G] | ||||
| FSK-7[1] [G] | ||||
| K-7[1] [G] | ||||
| M SCC120-44[1] [G] | ||||
| MFS SCC120-44[1] [G] | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[3] FS - FloodSafe
CIC - Ice Maker Supply Line
S - Stainless Steel Braid over Reinforced Vinyl Hose
P - Reinforced Vinyl Hose
Type of Connection From Supply (maximum inlet and outlet size 1/4")
C - Compression End Fitting
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
|
Reinforced Vinyl Toilet Supply Lines[1] [G] |
||||
| LF-AMT-16-614 Antimicrobial Connector | ||||
| LF-AMT12-614 Antimicrobial Connector | ||||
| LF-AMT20-614 Antimicrobial Connector | ||||
| LF-CSC-P-HH[2] | ||||
| LF-CTC-A-CB[2] | ||||
| LF-CTC-P-CB[2] | ||||
| LF-CTC-P-FB[2] | ||||
| LF-CTC-P-TB[2] | ||||
| LF-CTC-S-CB[2] | ||||
| LF-CTC-S-FB[2] | ||||
| LF-CTC-S-TB[2] | ||||
| LF-M SCT12-614W | ||||
| LF-M SCT16-614W | ||||
| LF-M SCT20-614W | ||||
| LF-M SCT9-614W | ||||
| LF-M ST12-814W | ||||
| LF-M ST20-814W | ||||
| LF-SMT12-614 Antimicrobial Connector | ||||
| LF-SMT20-614 Antimicrobial Connector | ||||
| LF-T12 | ||||
| LF-T12-814 | ||||
| LF-T20 | ||||
| LF-T20-814 | ||||
| LF-TC12-814 | ||||
| LF-TC20-814 | ||||
| LF-TSCT12-614W Stainless Steel | ||||
| LF-TSCT16-614W Stainless Steel | ||||
| LF-TSCT20-614W Stainless Steel | ||||
| LF-TSCT9-614W Stainless Steel | ||||
| LF-TST12-814 Stainless Steel | ||||
| LF-TST20-814 Stainless Steel | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] FS - FloodSafe
CDC - Dishwasher connector
CFC - Faucet connector
CIC - Ice maker supply line
CTC - Toilet connector
A - Thread weave with coextruded clear vinyl with antimicrobial additive
P - Reinforced vinyl hose
S - Stainless steel braid over reinforced vinyl hose
Type of connection from supply (maximum inlet size 1/2"):
C - Compression end fitting
F - FIP end fitting
T - Fine thread FIP end fitting
Type of connection to fixture (maximum outlet size 7/8"):
B - Ballcock end fitting
C - Compression end fitting
E - MIP elbow end fitting
F - FIP end fitting
O - OD compression end fitting
Hose has I.D. of 0.28" and length of 6-72".
FS may be used as a prefix or be used after the first letter of the trade name that
begins with M or T to indicate the use of a Floodsafe check valve on the supply side end.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : # 4 Zhejiang, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Valves |
||||
| (1)-BF-(2)-(3)(4)(5)-(6)(7)[1] [2] [G] | 2" - 24" | CLD 23 | MLTPL | |
| 405 NRS F x F[1] [G] | 2 1/2" x 10" | CLD 23 | MLTPL | |
| 405 NRS F x G[1] [G] | 2 1/2" x 10" | CLD 23 | MLTPL | |
| LF 25AUB (X)[1] [3] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF N45(X)-(Y)-M1[1] [4] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LF N55(X)-(Y)-M1[1] [4] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LF-FBV[1] [G] | 1/4" - 2" | CLD 23 | MLTPL | |
| LF-FBV-4[1] [G] | 1/4" - 4" | CLD 23 | MLTPL | |
| LF-FBV-E[1] [G] | 1/4" - 2" | CLD 23 | MLTPL | |
| LF-FBV-E-LH[1] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-FBV-LH[1] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-FBV-M[1] [G] | 1/2" - 3/4" | CLD 23 | MLTPL | |
| LF-FBVS-4[1] [G] | 1/2" - 3" | CLD 23 | MLTPL | |
| LF-WBV-3[1] [G] | 1/8" - 4" | CLD 23 | MLTPL | |
| LF-WBVS-3[1] [G] | 3/8" - 3" | CLD 23 | MLTPL | |
| LFFBV-3C-X[1] [7] [G] | 1/4" - 4" | CLD 23 | MLTPL | |
| LFFBVS-3C-QC-X[1] [7] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LFFBVS-3C-X[1] [7] [G] | 1/2" - 3" | CLD 23 | MLTPL | |
| LFTWH-2-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-2-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-2-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-CN-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-H-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-CN-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-H-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-QC-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-QC-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-QC-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-US-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-US-CN[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-US-CN-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFTWH-US-H[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-US-H-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFTWH-UT-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-UT-CN[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-UT-CN-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFTWH-UT-H[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-UT-H-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFX65B (x)-(Y)-Z1[1] [6] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LFX65B(X)-(Y)[1] [6] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] (1) Size: 02 - 24
(2) Body style
03 - Lug
04 - Wafer
(3) Body material
1 - Cast iron
2 - Ductile iron
(4) Disc material
2 - Aluminum bronze
3 - SS 316
(5) Shaft material
1 - Stainless steel 416
2 - Stainless steel 316
3 - Stainless steel 431
(6) Seat material
1 - EPDM (Canada)
4 - EPDM (US)
(7) Operator
0 - No handle
5 - Standard handle
G - Gear operator
P - Positioning/locking kit with handle
[3] (X) Suffixes indicate the following:
CPVC - CPVC tubing connection
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped w/gauge
HP - High pressure
LP - Low pressure
M3-Z6 - Water meter connections
PEX - Pex tubing connection
S - Solder Pipe Connection
SC - Sealed cage
S-DU - Double union solder inlet & outlet connections
Z10 - No union connection
Z3 - Sealed cage/corrosion resistant screws
Z7 - 400 psi max. inlet pressure
[4] LF - Lead free construction
(X) May be any combination of the following letters:
B - Bypass feature
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped w/ gauge
LP - Low pressure
U - Single union connection
(Y) May be any of the following:
CPVC - CPVC tubing connection
EZ - Easily adjustable w/ visible setting indicator
PEX - PEX tubing connection
S - Solder connection
SBrass - Sweat with brass tailpiece
THD - Standard threaded pipe connection, when used in combination with another
connection type
Z6 - Water meter connections
[5] This product has not been evaluated for use with end-point devices (tankless water
heaters used directly under a sink). H valves have a red handle and dielectric
insulator, are used on the outlet side of a tankless water heater, and do not contain an
internal check. CN valves have a blue handle and dielectric insulator, are used on the
inlet side of a tankless water heater, and do not contain an internal check. C valves
have a blue handle and dielectric insulator, are used on the inlet side of a tankless
water heater, and contain an internal check.
[6] LF - Lead free construction
(X) May be any combination of the following letters:
U - Single union connection
DU - Double union connection
S - Solder connection
(Y) May be any of the following:
G - Gauge tapping
HP - High pressure
RIK - Rough-In kit
Z1 - Suffix indicating customer special order.
[7] Suffix may include:
CC - Cap and chain
SS - Stainless steel ball and stem
TH - Tee handle
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] [G] |
||||
| LF4501B-1008 Male NPT Connector | 1/2" | D. HOT | MLTPL | |
| LF4501B-1412 Male NPT Connector | 3/4" | D. HOT | MLTPL | |
| LF4501B-1416 Male NPT Connector | 3/4" x 1" | D. HOT | MLTPL | |
| LF4501B-1812 Male NPT Reducing Connector | 1" x 3/4" | D. HOT | MLTPL | |
| LF4501B-1816 Male NPT Connector | 1" | D. HOT | MLTPL | |
| LF4510B-1008 Female NPT Connector | 1/2" | D. HOT | MLTPL | |
| LF4510B-1412 Female NPT Connector | 3/4" | D. HOT | MLTPL | |
| LF4510B-1416 Female NPT Connector | 3/4" x 1" | D. HOT | MLTPL | |
| LF4510B-1812 Female NPT Reducing Connector | 1" x 3/4" | D. HOT | MLTPL | |
| LF4510B-1816 Female NPT Connector | 1" | D. HOT | MLTPL | |
| LF4515B-10 Union Connector | 1/2" | D. HOT | MLTPL | |
| LF4515B-14 Union Connector | 3/4" | D. HOT | MLTPL | |
| LF4515B-18 Union Connector | 1" | D. HOT | MLTPL | |
| LF4515RB-1410 Reducing Union Conn. | 3/4" x 1/2" | D. HOT | MLTPL | |
| LF4515RB-1814 Reducing Union Conn. | 1" x 3/4" | D. HOT | MLTPL | |
| LF4516B-10 Slip Connector | 1/2" | D. HOT | MLTPL | |
| LF4516B-14 Slip Connector | 3/4" | D. HOT | MLTPL | |
| LF4516B-18 Slip Connector | 1" | D. HOT | MLTPL | |
| LF4517B-10 Union Elbow | 1/2" | D. HOT | MLTPL | |
| LF4517B-14 Union Elbow | 3/4" | D. HOT | MLTPL | |
| LF4517B-18 Union Elbow | 1" | D. HOT | MLTPL | |
| LF4517RB-1410 Reducing Union Elbow | 3/4" x 1/2" | D. HOT | MLTPL | |
| LF4517RB-1814 Reducing Union Elbow | 1" x 3/4" | D. HOT | MLTPL | |
| LF4518B-10 Stackable Union Elbow | 1/2" | D. HOT | MLTPL | |
| LF4518B-14 Stackable Union Elbow | 3/4" | D. HOT | MLTPL | |
| LF4518B-18 Stackable Union Elbow | 1" | D. HOT | MLTPL | |
| LF4521B-1008 Drop Ear Elbow | 1/2" | D. HOT | MLTPL | |
| LF4521B-1412 Drop Ear Elbow | 3/4" | D. HOT | MLTPL | |
| LF4522B-10 Union Elbow 45 | 1/2" | D. HOT | MLTPL | |
| LF4522B-14 Union Elbow 45 | 3/4" | D. HOT | MLTPL | |
| LF4522B-18 Union Elbow 45 | 1" | D. HOT | MLTPL | |
| LF4522SB-10 Stackable Union Elbow 45 | 1/2" | D. HOT | MLTPL | |
| LF4522SB-14 Stackable Union Elbow 45 | 3/4" | D. HOT | MLTPL | |
| LF4522SB-18 Stackable Union Elbow 45 | 1" | D. HOT | MLTPL | |
| LF4523B-10 Union Tee | 1/2" | D. HOT | MLTPL | |
| LF4523B-14 Union Tee | 3/4' | D. HOT | MLTPL | |
| LF4523B-18 Union Tee | 1' | D. HOT | MLTPL | |
| LF4524RB-141014 Reducing Union Tee | 3/4" x 1/2" x 3/4" | D. HOT | MLTPL | |
| LF4524RB-141410 Reducing Union Tee | 3/4" x 3/4" x 1/2" | D. HOT | MLTPL | |
| LF4524RB-181418 Reducing Union Tee | 1" x 3/4" x 1" | D. HOT | MLTPL | |
| LF4524RB-181814 Reducing Union Tee | 1" x 1" x 3/4" | D. HOT | MLTPL | |
| LF4526RB-141010 Double Reducing Union Tee | 3/4" x 1/2" x 1/2" | D. HOT | MLTPL | |
| LF4526RB-181414 Double Reducing Union Tee | 1" x 3/4" x 3/4" | D. HOT | MLTPL | |
| LF4531B-141614 Union Tee | 3/4" x 3/4" x 1" | D. HOT | MLTPL | |
| LF4531B-181618 Union Tee | 1" x 1" x 1" | D. HOT | MLTPL | |
| LF4545B-10 End Stop | 1/2" | D. HOT | MLTPL | |
| LF4545B-14 End Stop | 3/4" | D. HOT | MLTPL | |
| LF4545B-18 End Stop | 1" | D. HOT | MLTPL | |
[1] LF prefix indicates low lead. Only LF products comply with Annex G. Products may or
may not have the LF prefix.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : Kansas City, KS
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Strainer[G] |
||||
| P777-100 | 1/4" - 3/8" | CLD 23 | MLTPL | |
| P777-20 | 1/4" - 3/8" | CLD 23 | MLTPL | |
| P777-60 | 1/4" - 3/8" | CLD 23 | MLTPL | |
| P777-80 | 1/4" - 3/8" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Randolph, MA
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Thermal Expansion Tanks[G] |
||||
| PLT-35 | 14 gal. | D. HOT | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Kansas City, MO
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pipe[G] |
||||
| PlumbFLOW | 1/8" - 2" | C. HOT | PEX | |
| RadiantFLOW | 1/8" - 2" | C. HOT | PEX | |
| RadiantPEX | 1/8" - 2" | C. HOT | PEX | |
| RadiantPEX+ (w/ O2 Barrier) | 1/8" - 1" | C. HOT | PEX | |
| WaterPEX | 1/8" - 2" | C. HOT | PEX | |
| WaterPEX+ | 3/8" - 3/4" | C. HOT | PEX | |
| Watts Heating PEX (w/ O2 Barrier) | 1/8" - 2" | C. HOT | PEX | |
| Watts Radiant PEX (w/ O2 Barrier) | 1/8" - 2" | C. HOT | PEX | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Franklin, NH
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Backflow Preventers |
||||
| (XX)007-YY-ZZ[1] [2] [G] | 1/2" | CLD 23 | MLTPL | |
| (XX)007M1-YY-ZZ[1] [2] [G] | 1" - 2" | CLD 23 | MLTPL | |
| (XX)007M2-YY-ZZ[1] [2] [G] | 1 1/4" - 1 1/2" | CLD 23 | MLTPL | |
| (XX)007M3-YY-ZZ[1] [2] [G] | 3/4" | CLD 23 | MLTPL | |
| (XX)009-YY-ZZ[1] [2] [G] | 1/4" - 1/2" | CLD 23 | MLTPL | |
| (XX)009M2-YY-ZZ[1] [2] [G] | 1" - 2" | CLD 23 | MLTPL | |
| (XX)009M3-YY-ZZ[1] [2] [G] | 3/4" | CLD 23 | MLTPL | |
| LF719[8] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF7R[1] [7] [G] | 1/2" - 1" | C. HOT | MLTPL | |
| LF919[8] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] XX - LF - Lead free
SS - Stainless steel
YY - LF - Supplied without shut-off valves
QT - Supplied with shut-off valves
ZZ - Any combination of the following:
Blank - Standard unit
BC - Brass cap
CT (or C & T) - Cap and teather
LH - Locking handles
S - Strainer (LF777SI)
SH - Stainless handles
Z3 - Stainless handles and nuts
Z4 - Non-removable handles
Z5 - Special dipped test cock adapter
[7] Two suffix codes, denoting the connections, follow the LF7R.
2: NPTF; female pipe connection [not a union] (1/2", 3/4", 1")
U2: NPTF female union pipe connection (1/2", 3/4", 1")
U3: NPTM; male union pipe connection (3/4")
10: Meter thread union connection (1")
The only Certified suffix combinations are:
U2-2
U2-U2
10-U2
10-U3
[8] Products may include one or more of the following prefixes or suffixes:
S - Lead Free Strainer
LF (as suffix) - Less fitting
LF (as prefix) - Lead free
QT - Quarter turn ball valve
Options for non-wetted:
C & T - Cap and tether test cock covers
LH - Locking handled ball valves
SH - Stainless handled ball valves
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
|
Valves[1] [G] |
||||
| (D) (LF) 25AUB (X)[3] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-223[5] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-N223-M1[5] | 2 1/2" | CLD 23 | MLTPL | |
| LF-N223-M2[5] | 3" | CLD 23 | MLTPL | |
| LF-N45(X)-M1[4] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-N55(X)-M1[4] | 1/2" - 2" | CLD 23 | MLTPL | |
| P60-M1 | 1/4" | CLD 23 | MLTPL | |
| P60-M1-4 | 1/4" | CLD 23 | MLTPL | |
| Series LF-5[6] | 1/2" - 2" | CLD 23 | MLTPL | |
| Series LF-L5[6] | 1/2" - 2" | CLD 23 | MLTPL | |
| Series LF-U5[6] | 1/2" - 2" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[3] (D) Domestic manufacture
(X) May be any combination of the following:
CPVC - CPVC tubing connection
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped with gauge
HP - High pressure
LP - Low pressure
M3-Z6- Water meter connections
PEX - PEX tubing connection
S - Solder pipe connection
SC - Sealed cage
S-DU - Double union solder inlet & outlet connections
STD - Standard model
Z3 - Sealed cage/corrosion resistant screws
Z7 - 400 psi
Z10 - No union connection
[4] (X) May be any combination of the following:
B - Bypass feature
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped with gauge
LP - Low pressure
U - Single union connection
[5] Suffixes:
B - Built-in bypass
BS - British thread
G - Gauge tapping
GG - Gauge tapped with gauge
HP - High pressure
LP - Low pressure
S - Strainer attached
STD - Standard
[6] B - Bypass feature
G - Guage tapping
GG - Guage tapped with guage
HP - High pressure
LP - Low pressure
M3-Z6 - Water meter connections (3/4" & 1")
S - Solder pipe connection
SC - Sealed cage
Z3 - Sealed cage/corrosion resistant screws
Z9 - NPT Male thread union inlet (3/4")
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Mechanical Plumbing Devices
| Trade Designation | ||||
|
End Point Control Valves |
||||
| 0.375 LFUSGM1-B[1] [G] | ||||
| 0.375 LFUSGM1-B-SC[1] [G] | ||||
| 0.375 LFUSGM1-P[1] [G] | ||||
| 0.375 LFUSGM2-B[2] [G] | ||||
| 0.375 LFUSGM2-B-SC[2] [G] | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] Optional QC indicating quick connect fitting.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
|
Faucets[1] [3] [G] |
||||
| 1070 Thermostatic Faucet | ||||
| 1070-6 Thermostatic Faucet | ||||
| 1070A15 Thermostatic Faucet | ||||
| 1070A5 Thermostatic Faucet | ||||
| 1070PW Thermostatic Faucet | ||||
| G1070 Thermostatic Faucet | ||||
| G1070A5 Thermostatic Faucet | ||||
| G1070PW Thermostatic Faucet | ||||
| GP1070 Thermostatic Faucet | ||||
| GP1070A5 Thermostatic Faucet | ||||
| GP1070PW Thermostatic Faucet | ||||
| P1070 Thermostatic Faucet | ||||
| P1070-6 Thermostatic Faucet | ||||
| P1070A15 Thermostatic Faucet | ||||
| P1070A5 Thermostatic Faucet | ||||
| P1070PW Thermostatic Faucet | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[3] Suffixes:
-6 - 6" Handle (4" is the default size)
A15 - Aerator flow rate is 1.5 gpm
A5 - Aerator flow rate is 0.5 gpm (default flow rate is 2.0 GPM)
GD - Grid Drain
OGD - Offset Grid Drain
L – Laminar flow outlet
L5 – 0.5 gpm laminar flow outlet
PW - Faucet has pop-up waste stopper
VA - Vandal-resistant aerator
V5 – Vandal-resistant 0.5 gpm aerator
VL - Vandal-resistant laminar flow outlet
VL5 - Vandal-resistant 0.5 gpm laminar flow outlet
Prefixes:
G - Gooseneck spout
P - Deck plate
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : Ningbo, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Strainer[1] [G] |
||||
| LF777 SI | 3/8" - 3" | CLD 23 | MLTPL | |
| LF777SI-PART | 3/8" - 3" | CLD 23 | MLTPL | |
| LFS777 SI | 1/2" - 2" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : Shanghai, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Manifolds[1] [G] |
||||
| QC Quick Connect WPQCM-5 | [2] | D. HOT | MLTPL | |
| WPPM-12-M3BB | [5] | D. HOT | MLTPL | |
| WPPM-12-M4AB | [11] | D. HOT | MLTPL | |
| WPPM-12-M4BB | [11] | D. HOT | MLTPL | |
| WPPM-1212-M2AF | [3] | D. HOT | MLTPL | |
| WPPM-1212-M3AF | [6] | C. HOT | MLTPL | |
| WPPM-1212-M3BF | [6] | D. HOT | MLTPL | |
| WPPM-1212-M4AF | [4] | D. HOT | MLTPL | |
| WPPM-1212-M4BF | [4] | D. HOT | MLTPL | |
| WPPM-16-M6AB | [9] | D. HOT | MLTPL | |
| WPPM-1612-M4AF | [7] | D. HOT | MLTPL | |
| WPPM-1612-M6AF | [8] | D. HOT | MLTPL | |
| WPPM-1616-M6AF | [10] | D. HOT | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] 1" inlet & outlet x five 1/2" ports
[3] 3/4" inlet & outlet x two 1/2" ports
[4] 3/4" inlet & outlet x four 1/2" ports
[5] 3/4" inlet x three 1/2" ports
[6] 3/4" inlet & outlet x three 1/2" ports
[7] 1" inlet & 3/4" outlet x four 1/2" ports
[8] 1" inlet & 3/4" outlet x six 1/2" ports
[9] 1" inlet x six 1/2" ports
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[10] 1" inlet & outlet x six 1/2" ports
[11] 3/4" inlet x four 1/2" ports
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] [G] |
||||
| WPEX | 3/8" - 1" | C. HOT | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Facility : Nogales, Sonara, Mexico
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Flexible Plumbing Connectors |
||||
| 1/2" x 1/2" LFD-CFC-FFx20[2] [G] | ||||
[1] Hose length is 6". [2] Hose length is 20". [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Taichung, Taiwan
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Thermal Expansion Tanks[G] |
||||
| PLT-12 | 19 L | D. HOT | MLTPL | |
| PLT-20 | 34 L | D. HOT | MLTPL | |
| PLT-5 | 8 L | D. HOT | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Number of matching Manufacturers is 1
Number of matching Products is 336
Processing time was 1 seconds