These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=4M620&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Victaulic Co. | |
| 4901 Kesslersville Road | |
| Easton, PA 18040 | |
| United States | |
| 800-742-5842 | |
| 610-559-3300 | |
| Visit this company's website |
Facility : # 1 SS USA
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings |
||||
| No. 100 SSLT L.R. 90 Degree Elbow (304L) | 1" - 3" | C. HOT | SS | |
| No. 100 SSLT L.R. 90 Degree Elbow (316L) | 1 1/2" - 3" | C. HOT | SS | |
| No. 110 SSLT L.R. 45 Degree Elbow (304L) | 1" - 6" | C. HOT | SS | |
| No. 110 SSLT L.R. 45 Degree Elbow (316L) | 1" - 4" | C. HOT | SS | |
| No. 20 SS Tee (304L) | 1 1/4" - 8" | C. HOT | SS | |
| No. 20 SS Tee (316L) | 1 1/2" - 10" | C. HOT | SS | |
| No. 50 SSLT Concentric Reducer (304L) | 1 1/2"x3/4" - 8"x6" | C. HOT | SS | |
| No. 50 SSLT Concentric Reducer (316L) | 1 1/2"x1" - 8"x6" | C. HOT | SS | |
| No. 51 SSLT Eccentric Reducer (304L) | 2"x1 1/2" - 8"x6" | C. HOT | SS | |
| No. 51 SSLT Eccentric Reducer (316L) | 2" x 1" - 8" x 6" | C. HOT | SS | |
| No. 60 SS Endcap (304L) | 4" - 6" | C. HOT | SS | |
| No. 60 SS Endcap (316L) | 4" - 6" | C. HOT | SS | |
Facility : # 2 SS USA
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pipe |
||||
| No. 40 SS THD ADP NPL (304L) | 1" x 4" - 3" x 6" | C. HOT | SS | |
| No. 40 SS THD ADP NPL (316L) | 1 1/2" x 4"- 3" x 4" | C. HOT | SS | |
| No. 43 SS GRV ADP NPL (316L) | 3" x 4" | C. HOT | SS | |
| No. 43 SS GRV ADP NPL (304L) | 2" x 4" | C. HOT | SS | |
| No. 42 SS BEV ADP NPL (304L) | 1 1/2" x 4"- 4" x 6" | C. HOT | SS | |
| No. 42 SS BEV ADP NPL (316L) | 3" x 4" | C. HOT | SS | |
Facility : # 3 SS USA
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] |
||||
| No. 60 SS End Cap (304L) | 3/4" - 6" | C. HOT | SS | |
| No. 60 SS End Cap (316L) | 1" - 6" | C. HOT | SS | |
[1] Certification is for stainless steel fittings only and does not include the gasketed
couplings.
|
||||
Facility : # 4 SS China
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings |
||||
| No. 410 SS 90 Degree Elbow[1] | 1" - 1 1/4" | C. HOT | SS | |
| No. 411 SS 45 Degree Elbow[1] | 1" - 1 1/4" | C. HOT | SS | |
[1] Certified for stainless steel fittings only and shall not include the gasketed couplings. |
||||
Facility : Easton, PA
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Valves[G] |
||||
| Series 702 Butterfly Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
| Series 7A2 Butterfly Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
| Series 7B2 Butterfly Valve | 2 1/2" - 10" | CLD 23 | MLTPL | |
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
Facility : Bristol, TN
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings |
||||
| Aquamine | 2" - 12" | CLD 23 | MLTPL | |
|
Pipe |
||||
| Aquamine PVC 1120 High Impact Pipe | 2" - 12" | CLD 23 | PVC | |
Facility : Richmond Hill, Ontario, Canada
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings |
||||
| No. 100 SSLT Long Radius 90 Degree Elbow[1] | 3" - 10" | C. HOT | SS | |
| No. 110 SSLT Long Radius 45 Degree Elbow[1] | 3" - 10" | C. HOT | SS | |
| No. 20 SS Tee[1] | 1" - 2 1/2" | C. HOT | SS | |
| No. 25 SS-SW Reducer Tee[1] | 1 1/2"x1" - 10"x4" | C. HOT | SS | |
| No. 410 SS 90 Degree Elbow Global[1] | 3" - 12" | C. HOT | SS | |
| No. 411 SS 45 Degree Elbow Global[1] | 3" - 12" | C. HOT | SS | |
| No. 420 SS Tee Global[1] | 3" - 12" | C. HOT | SS | |
| No. 425 SS Red Tee Global[1] | 3"x2" - 12"x10" | C. HOT | SS | |
| No. 450 SS Concentric Reducer Global[1] | 2 ˝" - 2" - 12"x10" | C. HOT | SS | |
| No. 50 SSLT Reducer[1] | 5"x4" - 12"x8" | C. HOT | SS | |
| No. 51 SSLT Steel ECC Red[1] | 4"x2" - 10"x8" | C. HOT | SS | |
| No. 60 SS Cap[1] | 5", 8", 10" | C. HOT | SS | |
| Victaulic Bronze 610 90° Elbow[G] | 5" - 8" | C. HOT | BRONZE | |
| Victaulic Bronze 611 45° Elbow[G] | 5" - 8" | C. HOT | BRONZE | |
| Victaulic Bronze 620 Tee[G] | 2" - 8" | C. HOT | BRONZE | |
| Victaulic Bronze 625 Reducing Tee GRV x GRV x GRV[G] | 2" - 6" | C. HOT | BRONZE | |
| Victaulic Bronze 650 Concentric Reducer GRV x GRV[G] | 2 1/2" - 8" | C. HOT | BRONZE | |
| Victaulic Bronze 660 Cap[G] | 2" - 6" | C. HOT | BRONZE | |
[1] Certified for stainless steel fittings only and does not include the gasketed couplings. [G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%. |
||||
|
Pipe[1] |
||||
| No. 40 SS (Grv x Thd) NPL | 1 1/2" x 4"-3" x 4" | C. HOT | SS | |
| No. 42 SS (Grv x Bev) NPL | 1 1/2" x 4"-8" x 6" | C. HOT | SS | |
| No. 43 SS (Grv x Grv) NPL | 2" x 4" - 3" x 4" | C. HOT | SS | |
[1] Certified for stainless steel fittings only and does not include the gasketed couplings. |
||||
Facility : Dalian, China
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] |
||||
| No. 410 SS 90 Degree Elbow Global | 1" - 12" | C. HOT | SS | |
| No. 411 SS 45 Degree Elbow Global | 1" - 12" | C. HOT | SS | |
| No. 420 SS Tee Global | 1 1/2" - 12" | C. HOT | SS | |
| No. 425 SS Reducing Tee | 2"x1 1/2" - 12"x10" | C. HOT | SS | |
| No. 450 Concentric Reducer | 2"x1 1/2" - 12"x10" | C. HOT | SS | |
| No. 460 Caps | 3/4" - 12" | C. HOT | SS | |
[1] Certified for stainless steel fittings only. Certification does not include the gasketed
couplings.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 54
Processing time was 1 seconds

