These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=55560&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Savard Plumbing Co. | |
| 815 Chestnut Street | |
| North Andover, MA 01845-6098 | |
| United States | |
| 800-828-1300 | |
| 661-272-4600 | |
| Visit this company's website |
Facility : Nogales, Sonara, Mexico
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Flexible Plumbing Connectors |
||||
| Danco Inc. YYYYYY[1] | ||||
| Danco Inc. YYYYYYY[2] [G] | ||||
| Lil Q-Wick-E YYYYY[2] [G] | ||||
| M-(1) (2)[3] [G] | ||||
| M6XB[4] [G] | ||||
| MF (1) (2)[3] [G] | ||||
| MKXXB[1] | ||||
| PRO-FLO YYYYYYY[5] [G] | ||||
| PRO-FLO YYYYYYY[2] [G] | ||||
| Plumbmaster YYYYYYY[2] [G] | ||||
| Plumbmaster YYYYYYY[1] | ||||
| SSDISH 3/8CX3/8CXX[1] | ||||
| T-(1) (2)[3] [G] | ||||
| T6XB[4] [G] | ||||
| TF (1) (2)[3] [G] | ||||
| TMS Group YYYYYY[1] | ||||
| TMS Group YYYYYYY[2] [G] | ||||
| Thrifty Supply YYYYYYY[2] [G] | ||||
| Thrifty Supply YYYYYYY[1] | ||||
| WM (3) (4)[6] [G] | ||||
[1] XX Indicates length, maximum of 48" for 0.315" diameter flexible connectors. Maximum
of 40" for 0.375" diameter flexible connectors.
YYYYYYY This may be any of the following part numbers:
Danco Inc - 59991, 59993, 59990, 59973, 59975, 59977, 57023
Plumbmaster - 57021, 57023, 59851, 59854, 59855, 59865, 59869, 59871, 59873, 59973,
59975, 59977, 59990, 59991, 59993
Thrifty Supply 7642036, 7642037, 7642038, 7642085, 7642086, 7642087, 7642088, 7642095,
7642096, 7642097, 7642098, 7642101, 7642102, 4401479, 4401451, 4401480, 4401456,
4401481, 7641116, 7641117
TMS Group - 40800251, 40800252, 40800383, 40800250, 40800401, 40800397, 40800398,
40800399
[2] YYYYYYY This may be any of the following part numbers:
Danco Inc. 57001, 57003, 57005, 57033, 59603, 59623, 59625, 59627, 59629, 59691,
59693, 59695, 59703, 59705, 59707, 59721, 59726, 59756, 59758, 59762, 59764, 59788,
59789, 59790, 59791, 59793, 59794, 59799, 59821, 59823, 59825, 59827, 59829, 59831,
59839, 59841, 59843, 59851, 59854, 59855, 59857, 59860, 59862, 59869, 59871, 59873,
59876, 59901, 59903, 59905, 59907, 59909, 59919, 59921, 59923, 59925, 59927, 59929,
59955, 59957, 59959, 59979, 59981, 59983
Lil Q-Wick-E Steeline (XX indicates length up to 48") 619XX, 621XX, 623XX, 624XX,
625XX, 627XX, 628XX, 632XX, 633XX, 634XX, 635XX, 636XX, 637XX, 638XX, 639XX, 689XX,
875XX, 876XX, 878XX, 879XX, 880XX
Lil Q-Wick-E Tufline (XX indicates length up to 48") 273XX, 275XX, 276XX, 278XX,
279XX, 280XX, 281XX, 283XX, 284XX, 285XX, 287XX, 288XX, 292XX, 293XX, 294XX, 295XX,
296XX, 297XX, 298XX, 299XX
Plumbmaster - 52222, 52223, 52224, 57001, 57003, 57005, 57015, 57031, 57033, 59603,
59623, 59625, 59627, 59629, 59691, 59693, 59695, 59703, 59705, 59733, 59788, 59789,
59790, 59791, 59799, 59821, 59823, 59825, 59827, 59829, 59831, 59833, 59835, 59837,
59839, 59841, 59843, 59857, 59860, 59862, 59865, 59876, 59901, 59903, 59905, 59907,
59909, 59911, 59919, 59921, 59923, 59925, 59927, 59929, 59955, 59957, 59959, 59961,
59965, 59979, 59981, 59983
Thrifty Supply 4400423, 4400424, 4400425, 4400429, 4400443, 4400444, 4400453, 4400454,
4400482, 4400483, 4400484, 4401423, 4401424, 4401425, 4401453, 4401460, 4401460,
4401461, 4401461, 4401462, 4401462, 4401475, 4401477, 4401478, 7624068, 7624068,
7642010, 7642011, 7642012, 7642018, 7642019, 7642020, 7642026, 7642027, 7642028,
7642041, 7642042, 7642043, 7642046, 7642047, 7642048, 7642056, 7642057, 7642058,
7642059, 7642065, 7642065, 7642066, 7642066, 7642067, 7642067, 7642090, 7642091,
7642092, 7642093
TMS Group - 40800236, 40800237, 40800238, 40800239, 40800240, 40800241, 40800242,
40800243, 40800244, 40800247, 40800254, 40800255, 40800256, 40800258, 40800261,
40800381, 40800384, 40800385, 40800391, 40800392, 40800400
PRO-FLO - PF 147002, PF 147003, PF 147004, PF 147022, PF 147023, PF 147024, PF 147123,
PF 147124, PF 147162, PF 147172, PF 147192, PF 147302, PF 147303, PF 147304, PF 147306,
PF 147332, PF 147334, PF 147322, PF 147323, PF 147326, PF 147330, PF 147328, PF 147324,
PF 147422, PF 147423, PF 147424, PF 147426, PF 147430, PF 147432, PF 147342, PF 147343,
PF 147344, PF 147461, PF 147462, PF 147463, PF 147464, PF 147471, PF 147472, PF 147473,
PF 147474, PF 147491, PF 147492, PF 147365, PF 147494
[3] M - Stainless steel braid
MF - M-Series flare
T - Polyester exterior braid
TF - T-Series flare
End fitting combination:
0 - 1/2" FIP X 1/2" FIP
1 - 3/8" FCM X 1/2" FIP
2 - 7/16" FCM X 1/2" FIP
3 - 1/2" FCM X 1/2" FIP
33 - 1/2" FCM X 1/2" FCM
4 - 3/8" FCM X 3/8" FCM
5 - 7/8" FBC X 1/2" FIP
6 - 1/4" FCM X 1/4" FCM
60 - 3/4" FIP X 1/2" FIP
61 - 3/4" FIP X 3/8" FCM
7 - 7/8" FBC X 3/8" FCM
71 - 3/8" FCM X 3/8" Copper
8 - 7/8" FBC x 7/16" FCM
9 - 7/8" FBC x 1/2" FCM
(2) Length in inches not to exceed 48" with inner diameter of 0.315" for faucet, dish
washer and toilet connecters.
B - brass insert (barb)
BB - brass insert with brass ballcock
WM - Washing machine
[4] M - Stainless steel braid
T - PVC inner braided reinforced
6 - 1/4" FCM X 1/4" FCM
X - Length in feet, not to exceed 5'
B - Brass insert (barb)
Certified to a maximum length of 5' of 0.250" inner diameter tubing.
[5] Certified to a maximum length of 5' of 0.25" inner diameter tubing.
Pro-Flo PF147195, PF147198, PF147202, PF147205, PF147206
[6] (3) End fitting combination:
1 - 3/4" FIP X 3/4" FIP
2 - 3/4" FIP X 3/4" Comp.
3 - 3/4" FIP X 3/4" MIP
4 - 3/4" MIP X 3/4" Comp.
(4) WM - Length in feet not to exceed 40" with an inner diameter of 0.375".
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Flexible Plumbing Connectors |
||||
| Danco Inc. 59740[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59770[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59772[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59774[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59776[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59777[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59778[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59779[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59780[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59781[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59782[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Danco Inc. 59783[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| PF147222 | 3/4" x 3/4" | D. HOT | MLTPL | |
| PF147224 | 3/4" x 3/4" | D. HOT | MLTPL | |
| PF147232 | 3/4" x 3/4" | D. HOT | MLTPL | |
| PF147234 | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59740[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59776[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59777[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59778[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59779[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59780[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59781[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59782[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Plumbmaster 59783[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. Lil Q-Wick-E Water Heater Connectors 971XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. Lil Q-Wick-E Water Heater Connectors 973XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. Lil Q-Wick-E Water Heater Connectors 975XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. Lil Q-Wick-E Water Heater Connectors 977XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. Lil Q-Wick-E Water Heater Connectors 979XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. Lil Q-Wick-E Water Heater Connectors 980XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. Lincoln 3/4" x 3/4" FIP XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. ProFlo 3/4" FIP x 3/4" FIP XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Savard Plumbing Co. ProFlo 3/4" MIP x 3/4" FIP XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641100[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641101[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641102[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641104[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641105[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641106[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641107[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641108[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| Thrifty Supply 7641109[1] | 3/4" x 3/4" | D. HOT | MLTPL | |
| WHS-(1)XX[2] | 3/4" x 3/4" | D. HOT | MLTPL | |
[1] All Danco Inc., Plumbmaster, and Thrifty Supply connectors are limited to 84" length.
[2] WH - Water Heater
S - Stainless Steel Braid
(1) Number - End Fitting Combination
1 - 3/4" FIP x 3/4" FIP
2 - 3/4" FIP x 3/4" COMP.
3 - 3/4" FIP x 3/4" MIP
4 - 3/4" MIP x 3/4" COMP.
XX - Length up to 84
971 - 3/4" FIP x 3/4" FIP
973 - 3/4" MIP x 1/2" FIP
975 - 3/4" FIP x 1/2" Copper C
977 - 3/4" FIP x 3/4" Copper C
979 - 3/4" MIP x 1/2" Copper C
980 - 3/4" MIP x 3/4" Copper C
|
||||
|
Tubing/Hose [G] |
||||
| Proline Vinyl Tubing | [3] | D. HOT | MLTPL | |
[3] Certified for the following maximum lengths for each diameter:
331" of 0.125" diameter tubing
165" of 0.25" diameter tubing
131" of 0.315" diameter tubing
110" of 0.375" diameter tubing
66" of 0.625" diameter tubing
55" of 0.75 diameter tubing
41" of 1" diameter tubing
33" of 1.25" diameter tubing
Certified for a maximum SA/V ratio of 130 sq. in./L.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 65
Processing time was 0 seconds