These NSF Official Listings are current as of Wednesday, May 22, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=58110&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Newlife Coatings, Inc. 
31004 Highway 27
P.O. Box 478 
Lake Hamilton, FL 33851 
United States 
863-438-8783

Facility : Lake Hamilton, FL

Protective (Barrier) Materials

      Water Water
    Water Contact Contact Contact
  Trade Designation Size Restriction Temp Material

Coatings - Pipe - Immediate Return to Service[1]
  EC-5[2] >= 10" CLD 23 EPOXY
  NLC-146S[2] >= 10" CLD 23 EPOXY
  S-301[2] >= 10" CLD 23 EPOXY 

[1] Evaluated for immediate return to service.
[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 40
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 hours at 77°F
    Special Comments: Mix ratio of Part A:Part B is 2:1 by weight.

Coatings - Tank
  EC-5[2] >= 75 gal. CLD 23 EPOXY
  M301[3] >= 500,000 gal. CLD 23 EPOXY
  NLC-146S[2] >= 75 gal. CLD 23 EPOXY
  S-301[2] >= 75 gal. CLD 23 EPOXY
  S301LV[3] >= 500,000 gal. CLD 23 EPOXY
  T301[3] >= 500,000 gal. CLD 23 EPOXY 

[2] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 40
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 hours at 77°F
    Special Comments: Mix ratio of Part A:Part B is 2:1 by weight.
[3] Number of Coats: 1
    Maximum Field Use Dry Film Thickness (in mils): 40 - 250
    Maximum Thinner: None
    Final Cure Time and Temperature: 5 hours at 75°F
    Special Comments: Mix ratio of Part A:Part B is 2:1 by volume.

Number of matching Manufacturers is 1
Number of matching Products is 9
Processing time was 0 seconds