These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=79020&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Parker Hannifin Corp. - Parflex Division 
1300 North Freedom Street
Ravenna, OH 44266 
United States 
330-296-2871

Facility : Kent, OH

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Valves
  TrueSeal™ Acetal Check Valve A(X)(1)VC(1)-MG[1] [G] 1/4" - 3/8" C. HOT MLTPL 

[1] (X) Color: B (black) or W (white).  No designation defaults to standard gray.
    (1) Inlet and outlet size: 4 (1/4"), 5 (5/16") or 6 (3/8").
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Fittings
  TrueSeal™ Acetal Fittings(X)(1)(3)(1 or 4)-(2)[1] [G] 5/32" - 1/2" C. HOT POM 

[1] (X) B, W indicating color.  No designation defaults to standard gray.
    (1) 2.5, 4, 5, 6, 8 indicating tube size.
    (2) BLK, BLU, GRA, GRN, HBLU, HDGR, HRED, HWHT, HYEL, MG, RED, WHT, YEL indicating
        collet designation.
    (3) BU, CAP, CU, EU, FA, FC, FE, FF, MC, ME, MES, MRS, MTS, RD, ST, TCB, TEB, TEU,  
        TMC, TPL, TSC, TU, UC, WY indicating fitting configuration.
    (4) 2, 4, 6, 7, 8, 9 indicating thread size.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Ravenna, OH

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Tubing/Hose
  LIQUIfit™[1] [2] C. HOT PE
  Y Series[1] [2] C. HOT PE
  E Series[1] [2] C. HOT PE 

[1] Certified colors are: black, blue, brown, gray, green, natural, orange, purple, red,
    white, and yellow.
[2] Certified for the following diameters and lengths:
    1/4" diameter, maximum length 140"
    5/16" diameter, maximum length 112"
    3/8" diameter, maximum length 93"
    1/2" diameter, maximum length 70"
    5/8" diameter, maximum length 56"
    6 mm diameter, maximum length 3.7 m
    8 mm diameter, maximum length 2.8 m
    10 mm diameter, maximum length 2.2 m
    12 mm diameter, maximum length 1.8 m

Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds