These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=80710&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
Tucai, SA 
C/. Llobateras 12
Poligono Industrial Santiga 
08210 Barberà del Vallès 
Spain 
34 93 718 9562
Visit this company's website

Facility : Silistra Region, Bulgaria

Mechanical Plumbing Devices

  Trade Designation      

Flexible Plumbing Connectors
  MINI TAQ Pex (1)(2)(3)(4)[2]      
  TAQ FLX (1)(2)(3)(4)[1] [G]      
  TAQ Pex (1)(2)(3)(4)[2]      

[1] TAQ FLX (1)(2)(3)(4)    
    (1) Type of braided hose (SS for stainless steel, TP for plastic braiding)
    (2) Type of end-fitting, position 1 - 3/8 UNF, 5/16 UNF, M10X1
    (3) Type of end-fitting, position 2 - 9/16 UNEF
    (4) Tubing length - maximum 80"
[2] TAQ PEX or MINI TAQ PEX
    (1) Fitting dimension, position 1 - M10x1, M8x1, M12x1, M15x1, 9/16, G3/8, G1/2
    (2) Fitting dimension, position 2 - M15x1, 9/16, G3/8, G1/2
    (3) Length of male fitting in position (e. g. L66)
    (4) Tubing length - maximum 1500 mm
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
    requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
    Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
    2014.

    

    


Facility : Zhejiang Province, China

Mechanical Plumbing Devices

  Trade Designation      

Flexible Plumbing Connectors
  TAQ (1)(2)(3)(4)(5)[1]      
  TAQ FORTE (1)(2)(3)(4)(5)[3]      
  TAQ MINI (1)(2)(3)(4)(5)[2]      
  TAQ PEX (1)(2)(3)(4)(5)[5]      
  TAQ PEX MINI (1)(2)(3)(4)(5)[4]      

[1] TAQ 
    (1) Type of braiding (SS: stainless, TP: nylon) 
    (2) Position 1 - Type of end fitting (M10x1, M15x1, 3/8 NPT) 
    (3) Poistion 2 - Type of end fitting (9/16-24 UNEF, 1/2 NPSM, 15/16 UNEF) 
    (4) Length of male fitting in position 1 or 2 (i.e. L66) or blank if female fitting 
    (5) Tubing length - maximum 85".
[2] TAQ MINI 
    (1) Type of braiding (SS: stainless, TP: nylon) 
    (2) Position 1 - Type of end fitting (M10x1, M8x1, 3/8 UNF) 
    (3) Poistion 2 - Type of end fitting (9/16-24 UNEF, 1/2 NPSM) 
    (4) Length of male fitting in position 1 or 2 (i.e. L66) or blank if female fitting 
    (5) Tubing length - maximum 85".
[3] TAQ FORTE 
    (1) Type of braiding (SS: stainless, TP: nylon) 
    (2) Position 1 - Type of end fitting (M12x1) 
    (3) Poistion 2 - Type of end fitting (1/2 NPSM) 
    (4) Length of male fitting in position 1 or 2 (i.e. L66) or blank if female fitting 
    (5) Tubing length - maximum 65".
[4] TAQ PEX MINI: 
    (1) Type of braiding (SS: stainless, TP: nylon) 
    (2) Position 1 - Type of end fitting (3/8 UNF, M8x1, M10x1, ER#Mn) 
    (3) Position 2 - Type of end fitting (9/16-24 UNEF, 1/2 NPSM) 
    (4) Length of male fitting in position 1 or 2 (i.e. L66) or blank if female fitting 
    (5) Tubing length - maximum 80".
[5] TAQ PEX: 
    (1) Type of braiding (SS: stainless, TP: nylon) 
    (2) Position 1 - Type of end fitting (M10x1, M15x1) 
    (3) Position 2 - Type of end fitting (9/16-24 UNEF, 1/2 NPSM) 
    (4) Length of male fitting in position 1 or 2 (i.e. L66) or blank if female fitting 
    (5) Tubing length - maximum 65".


Number of matching Manufacturers is 1
Number of matching Products is 8
Processing time was 0 seconds