These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0048917&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| H.B. Fuller Company | |
| 1200 Willow Lake Boulevard | |
| St. Paul, MN 55110-5101 | |
| United States | |
| 651-236-5900 | |
| Visit this company's website |
Facility : Grand Rapids, MI
Joining and Sealing Materials
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Adhesives |
||||
| UR3577[G] | [2] | D. HOT | ADH | |
| UR3501A and UR3501B | [1] | D. HOT | ADH | |
| UR3577LV[G] | [2] | D. HOT | ADH | |
[1] Mix ratio is 100:50 (A:B) by volume or 100:62.5 (A:B) by weight. Minimum cure time is 7
days at 77°F then 3 hours at 158°F.
[2] Mix ratio is 100:100 (A:B) by volume or 100:110 (A:B) by weight with a maximum dry film
thickness of 50 mils. Minimum cure time is 7 days at 77°F then 3 hours at 158°F
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Potting Compounds |
||||
| FE7811 | [1] | CLD 23 | EPOXY | |
| UR2187 | [2] | CLD 23 | PUR | |
[1] Certified for use as a potting material in hollow fiber filtration devices 8 inches in
diameter and larger with a minimum daily flow of 12,000 Liters.
[2] Certified for use as a potting material in hollow fiber filtration devices 8 inches in
diameter and larger with a minimum daily flow of 2000 Liters.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 5
Processing time was 0 seconds

