These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0072821&Standard=061&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Merit Brass Company | |
| One Merit Drive | |
| Cleveland, OH 44143 | |
| United States | |
| 800-726-9800 | |
| 216-261-9800 |
Facility : # 1 Thailand
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pipe [G] |
||||
| Brass Pipe Nipple[2] | 1/8" - 2" | C. HOT | BRASS | |
| Chrome Plated Pipe Nipple | [1] | C. HOT | BRASS | |
[1] The Certification for the Chrome Plated Pipe Nipple is restricted to the maximum lengths
and diameters shown below.
Nominal Pipe Diameter Length
1/8" 13.1 ft
1/4" 9.8 ft
3/8" 7.4 ft
1/2" 5.8 ft
3/4" 4.4 ft
1" 3.4 ft
1 1/4" 2.7 ft
1 1/2" 2.3 ft
2" 1.7 ft
[2] The Brass Pipe Nipple is Certified by NSF to NSF/ANSI 61 for use in drinking water
supplies of pH 6.5 and above. Drinking water supplies that are less than pH 6.5 may
require corrosion control to limit leaching of copper into the drinking water.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 2
Processing time was 0 seconds

