These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0102184&Standard=061&



NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.


 
Conley Corporation 
2795 East 91st Street
Tulsa, OK 74137 
United States 
800-331-5502 
918-299-5051
Visit this company's website

Facility : Tulsa, OK

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Fittings[1] [2] [3] [4] [G]
  Conley #100 Cement 90 Degree Ell 1" - 30" D. HOT FRP
  Conley #100LR Cement 90 Degree Long Radius Ell 1" - 30" D. HOT FRP
  Conley #101 Flanged 90 Degree Ell 1" - 30" D. HOT FRP
  Conley #101 LR Flanged Long Radius 90 Degree Ell 1" - 30" D. HOT FRP
  Conley #102 Cement 45 Degree Ell 1" - 30" D. HOT FRP
  Conley #103 Flanged 45 Degree Ell 1" - 30" D. HOT FRP
  Conley #104 Cement Tee 1" - 30" D. HOT FRP
  Conley #104R Cement Reducing Tee 1" - 30" D. HOT FRP
  Conley #105 Flanged Tee 1" - 30" D. HOT FRP
  Conley #106 Cement Flange 1" - 30" D. HOT FRP
  Conley #107 Blind Flange 1" - 30" D. HOT FRP
  Conley #108 FLG x CEM 90 Degree Ell 1" - 30" D. HOT FRP
  Conley #109 FLG x CEM 45 Degree Ell 1" - 30" D. HOT FRP
  Conley #110 CEM X CEM x FLG Tee 1" - 30" D. HOT FRP
  Conley #112 Cement Cross 1" - 30" D. HOT FRP
  Conley #113 Flanged Cross 1" - 30" D. HOT FRP
  Conley #115 Threaded Cap 1" - 6" D. HOT FRP
  Conley #116 Cement Reducer Concentric 1 1/2"x1" - 30"x24" D. HOT FRP
  Conley #116 Cement Reducer Eccentric 1 1/2"x1" - 30"x24" D. HOT FRP
  Conley #117 Flanged Reducer 1 1/2"x1" - 30"x24" D. HOT FRP
  Conley #119 Cement Lateral 1" - 30" D. HOT FRP
  Conley #119R Cement Reducing Lateral 2" x 1" - 20" x 18" D. HOT FRP
  Conley #120 Flanged Lateral 1" - 30" D. HOT FRP
  Conley #120R Flanged Reducing Lateral 1" - 30" D. HOT FRP
  Conley #121 IP Threaded Coupling 1" - 6" D. HOT FRP
  Conley #122 Cement Coupling 1" - 30" D. HOT FRP
  Conley #124 Reducer Bushing 1"x1 1/2" - 4"x3" D. HOT FRP
  Conley #126 Cement Cap 1" - 6" D. HOT FRP
  Conley #127 Threaded Male Bushing 1" - 6" D. HOT FRP
  Conley #128 Cement Reducer Insert 2" x 1" - 8" x 6" D. HOT FRP
  Conley #129 CEM OD x IP Insert 1" x 1/2" - 6" D. HOT FRP
  Conley #131 Adapter Nipple 1" - 6" D. HOT FRP
  Conley #132 Adapter Nipple 1" - 6" D. HOT FRP
  Conley #137 Cement True Wye 1" - 30" D. HOT FRP
  Conley #138 Flanged True Wye 1" - 30" D. HOT FRP
  Conley Schedule 30 Filament Wound Epoxy Fittings 1" - 30" D. HOT FRP
  Conley Schedule 40 Filament Wound Epoxy Fittings 1" - 30" D. HOT FRP
  Conley Schedule 40-150 Filament Wound Epoxy Fittings 1" - 30" D. HOT FRP
  Conley Schedule 50 Filament Wound Epoxy Fittings 1" - 30" D. HOT FRP
  Conley Schedule 90 Filament Wound Epoxy Fittings 1" - 30" D. HOT FRP

[1] Mix ratio of C-Weld adhesive is 100 parts PART 1:24 parts PART 2 by weight.
[2] Certification includes the use of Conley C-Weld adhesive.
[3] Certification does not include flange gaskets or hardware.
[4] All fittings are available in schedule 30, 40, 40-150, 50, or 90.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Pipe[1] [2] [G]
  Conley Schedule 30 Filament Wound Epoxy Pipe 1" - 30" D. HOT FRP
  Conley Schedule 40 Filament Wound Epoxy Pipe 1" - 30" D. HOT FRP
  Conley Schedule 40-150 Filament Wound Epoxy Pipe 1" - 30" D. HOT FRP
  Conley Schedule 50 Filament Wound Epoxy Pipe 1" - 30" D. HOT FRP
  Conley Schedule 90 Filament Wound Epoxy Pipe 1" - 30" D. HOT FRP

[1] Mix ratio of C-Weld adhesive is 100 parts PART 1:24 parts PART 2 by weight.
[2] Certification includes the use of Conley C-Weld adhesive.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Number of matching Manufacturers is 1
Number of matching Products is 45
Processing time was 0 seconds