These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0110624&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Asahi / America, Inc. 
35 Green Street
Malden, MA 02148 
United States 
800-343-3618 
781-321-5409
Visit this company's website

Facility : Bad Hall, Austria

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Pipe[1] [G]
  Chem Proline® Pipe 23 mm - 315 mm CLD 23 PE
  Chem Prolok® Pipe 20 mm - 315 mm CLD 23 PE 

[1] Certified for standard dimensions ratios of 7 and 11, the sizes shown represent the pipe
    outer diameter.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.


Facility : Bad Hall, Austria

Pipes and Related Products

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Fitting[G]
  45° Elbow 581108005 20 mm CLD 23 PE
  45° Elbow 581108007 25 mm CLD 23 PE
  45° Elbow 581108010 32 mm CLD 23 PE
  45° Elbow 581108015 50 mm CLD 23 PE
  45° Elbow 581108020 63 mm CLD 23 PE
  45° Elbow 581108030 90 mm CLD 23 PE
  45° Elbow 581108040 110 mm CLD 23 PE
  90° Elbow 581105005 20 mm CLD 23 PE
  90° Elbow 581105005 20 mm CLD 23 PE
  90° Elbow 581105007 20 mm CLD 23 PE
  90° Elbow 581105010 20 mm CLD 23 PE
  90° Elbow 581105020 20 mm CLD 23 PE
  90° Elbow 581105030 20 mm CLD 23 PE
  90° Elbow 581105040 20 mm CLD 23 PE
  Chem Proline® 20 mm - 110 mm CLD 23 PE
  Chem Prolok® 20 mm - 110 mm CLD 23 PE
  Concentric Reducer 581129101 25 mm x 20 mm CLD 23 PE
  Concentric Reducer 581129130 32 mm x 20 mm CLD 23 PE
  Concentric Reducer 581129131 32 mm x 25 mm CLD 23 PE
  Concentric Reducer 581129211 50 mm x 32 mm CLD 23 PE
  Concentric Reducer 581129249 63 mm x 32 mm CLD 23 PE
  Concentric Reducer 581129251 90 mm x 63 mm CLD 23 PE
  Concentric Reducer 581129422 110 mm x 90 mm CLD 23 PE
  Coupling 581116005 20 mm CLD 23 PE
  Coupling 581116007 25 mm CLD 23 PE
  Coupling 581116010 32 mm CLD 23 PE
  Coupling 581116015 50 mm CLD 23 PE
  Coupling 581116020 63 mm CLD 23 PE
  Coupling 581116030 90 mm CLD 23 PE
  Coupling 581116040 110 mm CLD 23 PE
  Electrofusion Coupling 581117005 20 mm CLD 23 PE
  Electrofusion Coupling 581117007 25 mm CLD 23 PE
  Electrofusion Coupling 581117010 32 mm CLD 23 PE
  Electrofusion Coupling 581117015 50 mm CLD 23 PE
  Electrofusion Coupling 581117020 63 mm CLD 23 PE
  Electrofusion Coupling 581117030 90 mm CLD 23 PE
  Electrofusion Coupling 581117040 110 mm CLD 23 PE
  End Cap 581112005 20 mm CLD 23 PE
  End Cap 581112007 25 mm CLD 23 PE
  End Cap 581112010 32 mm CLD 23 PE
  End Cap 581112015 50 mm CLD 23 PE
  End Cap 581112020 63 mm CLD 23 PE
  End Cap 581112030 90 mm CLD 23 PE
  End Cap 581112040 110 mm CLD 23 PE
  Stub End (ANSI) 581132005 20 mm CLD 23 PE
  Stub End (ANSI) 581132007 25 mm CLD 23 PE
  Stub End (ANSI) 581132010 32 mm CLD 23 PE
  Stub End (ANSI) 581132015 50 mm CLD 23 PE
  Stub End (ANSI) 581132020 63 mm CLD 23 PE
  Stub End (ANSI) 581132030 90 mm CLD 23 PE
  Stub End (ANSI) 581132040 110 mm CLD 23 PE
  Stub End (DIN) 581133005 20 mm CLD 23 PE
  Stub End (DIN) 581133007 25 mm CLD 23 PE
  Stub End (DIN) 581133010 32 mm CLD 23 PE
  Stub End (DIN) 581133012 40 mm CLD 23 PE
  Stub End (DIN) 581133015 50 mm CLD 23 PE
  Stub End (DIN) 581133020 63 mm CLD 23 PE
  Stub End (DIN) 581133025 75 mm CLD 23 PE
  Stub End (DIN) 581133030 90 mm CLD 23 PE
  Stub End (DIN) 581133040 110 mm CLD 23 PE
  Tees 581120005 20 mm CLD 23 PE
  Tees 581120007 25 mm CLD 23 PE
  Tees 581120010 32 mm CLD 23 PE
  Tees 581120015 50 mm CLD 23 PE
  Tees 581120020 63 mm CLD 23 PE
  Tees 581120030 90 mm CLD 23 PE
  Tees 581120040 110 mm CLD 23 PE 

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 69
Processing time was 0 seconds