These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0125095&Standard=061&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Aerator Solutions, LLC 
11765 Main Street
Roscoe, IL 61073 
United States 
888-237-2867 
815-623-5111
Visit this company's website

Facility : Roscoe, IL

Mechanical Devices

      Water Water
      Contact Contact
  Trade Designation Size Temp Material

Miscellaneous Process Devices/Components
  EcoJet™ A10[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A15[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A20[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A25[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A3[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A30[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A40[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A5[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A50[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A60[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A7[2] [G] [1] CLD 23 MLTPL
  EcoJet™ A75[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M10[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M15[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M20[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M25[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M3[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M30[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M40[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M5[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M50[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M60[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M7[2] [G] [1] CLD 23 MLTPL
  EcoJet™ M75[2] [G] [1] CLD 23 MLTPL 

[1] Certified for use in tanks 75,000 gallons and greater.
[2] The "M" models are mixers while the "A" models are aerators.  The numerical suffix after
    the "A" and "M" in the trade name indicate the horsepower of the motor.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 24
Processing time was 0 seconds