[1] Certified for a minimum flow rate of 55,000 L/day.
    Dimensions: 
    B30 units - 28.75" long, 6.5" outer diameter, and 1.6" inner diameter.
    B units   - 39" long, 6.5" outer diameter, and 1.6" inner diameter.
    KF units  - 39" long, 6.5" outer diameter, and 1.6" inner diamter.
[2] Product codes: 
    742 - 1 micron
    743 - 2 micron
    744 - 5 micron
    745 - 10 micron
    746 - 15 micron
[3] WW  - Length of cartridge, in inches
          40
          60
    XXX - Removal rating 
          001 - 1 micron
          002 - 2 micron
          005 - 5 micron
          010 - 10 micron
          015 - 15 micron
          025 - 25 micron
          040 - 40 micron
          070 - 70 micron
    Y   - End o-ring type
          A - Silicone
          B - Fluorocarbon
          C - EPR
          D - Nitrile
    Z   - Packaging option (numbers of filters per box)
          01 - 1 pack
          04 - 4 pack
    Size: Filter elements are 40" or 60" long and 6.5" in diameter.
[4] Certified for a minimum flow of 65,000 L/day.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Product also complies with NSF/ANSI 372.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Product also complies with NSF/ANSI 372.
[2] Suffixes:
    blank 
    B   - Buried 
    EX  - Base extension 
    MP  - Mounted pump 
    P   - Pipe mounted 
    PST - Pump system tank
    S
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] All Aquamaster and Magmaster models in sizes 4" - 95" (DN100 - DN2400) and the
    WaterMaster F (all sizes) may be chlorobutyl-lined. Magmaster models in sizes 2 1/2"
    (DN65) and 3" (DN80) may also be chlorobutyl-lined.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Certified for a maximum surface area to volume ratio not to exceed 0.3 sq. in./L in pipe
    or 1% of a 20,000 gallon tank.
[2] To obtain the proper mix, use at least a 3/4" length, but no more than 1/3 of a full
    stick, of product which has been cut with a knife. Product must be mixed for 60-90
    seconds.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] YYY denotes color for the outermost layer. Color codes are:
    BLK  - Black
    BLU  - Blue
    DGRY - Dark Gray
    GRN  - Green
    LGRY - Light Gray 
    RED  - Red
    WHT  - White
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Certified for use in tanks 75,000 gallons and greater.
[2] The "M" models are mixers while the "A" models are aerators.  The numerical suffix after
    the "A" and "M" in the trade name indicate the horsepower of the motor.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] XX refers to the size of the valve in inches and may be 03, 04, 06, 08, 10, 12, 14, or
    16.
[2] Certified for use in distribution systems only.
[3] YY represents size in inches and may be 14, 16, 18, 20, 24, 30, 36, 42, 48, 54, 60, or
    66.
[4] XX represents size in inches and may be 04, 06, 08, 10, or 12.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Possible suffixes taking the place of X in the trade name: NRS, OSY, OSY F x G, OSY G x
    F, OSY G x G.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] LF - Lead free
[1] LF - Lead free
[2] Products may include one or more of the following prefixes or suffixes:
    S              - Lead Free Strainer
    LF (as prefix) - Lead free
    LF (as suffix) - Less fitting
    QT             - Quarter turn ball valve
    Options for non-wetted:
    C & T - Cap and tether test cock covers
    LH    - Locking handled ball valves
    SH    - Stainless handled ball valves
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[16] MICRO EVO Designations: 
     AAAA - Color (any alpha numeric characters) 
     BB   - Micro Evo Style wand (ED, EJ or ES) 
     CC   - Shell design (any alpha numeric characters) 
     D    - Threaded Distributor (1, 2, 3 or 4) 
     EE   - Waterway Extension (R1, R2, R3, R4, A1, A2, A3 or A4) 
     F    - Waterway (0, 1 or 2) 
     G    - Spring (0, 1 or 2) 
     HH   - Aerator (D1, D5, D6, D7, D8, D9, S2, J1, J2, J3, J4, J5, J6, J7. J8 or J9) 
     I    - Flow controller (0, 1, 2, 3, 4, 5) 
     J    - Trigger (any single alpha or numeric characters) 
     K    - Faceplate (0 or 1) 
     L    - Packaging (any single alpha or numeric characters) 
     M    - Customization (any single alpha or numeric characters)
[17] MICRO designations: 
     AAAA - Color (any alpha numeric characters) 
     BB   - Micro Style wand (GD, GJ, GS, MD, MJ, or MS) 
     CC   - Shell design (any alpha numeric characters) 
     DD   - Waterway (B1, B2, B3, B4, B5, B6, G1, G2, G3, G4, G5, G6, L1, L2, L3, L4, L5, 
            L6, M3, M4, M5, M6) 
     E    - Distributor (1, 2, 3) 
     F    - Spring (0, 1, 2, 3, or 4) 
     GG   - Aerator (F1, F2, F3, F4, F5, F6, F7, F8, F9, J1, J2, J3, J4, J5, J6, J7, J8, 
            J9, N1, N5, N6, N7, N8, N9, S1, S2, S3, V1, V5, V6, V7, V8, or V9) 
     HH   - Flow controller (00, 01, 02, 03, 04, 05, 10, 14, 15, 16, 17, 18, 19, or 20) 
     I    - Trigger (any single alpha or numeric characters) 
     J    - Faceplate (0, 1, 2, 3, 4, or 5) 
     K    - Packaging (any single alpha or numeric characters) 
     L    - Customization (any single alpha or numeric characters)

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[13] AAAA - Color (any four digit number)
       BB - Concept style wand (CG,CT,CY,EP,GP,OP,QP,TP,TX, or YP)
       CC - Waterway (G1,G2,T1, or T2)
       DD - Diverter shell (01,02,03)
        E - Eccentric plug (1,2,3, or 4)
        F - Spring (0,1, or 2)
        G - Aerator (0,1,2,5,A,C,E,F,G,H,J,K,L,M,S,T,U,V,W,X,Y,Z,&, or £)
        H - Flow controller (0,1,2,3,4,5,6,9,A, or B)
        I - Trigger cover (any single alpha or numeric character)
        J - Trigger cover insert (any single alpha or numeric character)
       KK - Faceplate style (D1,D2,D3,D4,D5, or D6)
        L - Packaging (any single digit number)
        M - Screen washer type (0,1, or 2)

[3] AAAA - Color (any four digit number)
      BB - Moen style wand (MO)
       C - Waterway (5,G,H,K,L,M,N,P,R,T,U, or V)
       D - Circular insert (4 or 5)
       E - Spring (2,3, or 4)
       F - Aerator (0,1,2,3,4,5,A,E,F,G,H,I,K,L,M,P,Q,U,V,Y, or Z)
       G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16,51,A1,A2,A4,A6,A7,B1,B2,B3,B4,P1,P2,P3, or P5)
       J - Packaging (any single digit number)
       K - Screen washer type (0,1, or 2)
       L - Unassigned (any single digit number)
      MM - Transition sleeve (any two digit number)
       N - Custom version (any single digit number)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[6] AAAA - Color (any four digit number)
       B - Macro Corta style wand (MC)
       C - Waterway (A,H,K,L,M,N, or P)
       D - Circular insert (4 or 5)
       E - Spring (0,2,3 or 4)
       F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,P,Q,U,V,W,Y,Z,&, or £)
       G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16,51,A1,A2,A4,A6,A7,B1,B2,B3,B4,P1,P3, or P5)
       J - Packaging (any single digit number)
       K - Screen washer type (0,1, or 2)
       L - Unassigned (any single digit number)
      MM - Trigger cover insert (any two alpha or numeric characters)
       N - Custom version (any single digit number)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[4] AAAA - Color (any four digit number)
      BB - Macro Ergo style wand (ME)
       C - Waterway (5,6,8,9,C,D,E,G,H,K,L,M,N,P,R,T,U, or V)
       D - Circular insert (4 or 5)
       E - Spring (0,2,3 or 4)
       F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,P,Q,U,V,W,Y,Z,&, or £)
       G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16,51,A1,A2,A4,A6,A7,B1,B2,B3,B4,P1,P2,P3, or P5)
       J - Package (any single digit number)
       K - Screen washer type (0,1, or 2)
       L - Grip (any single digit number)
      MM - Trigger cover insert (any two alpha or numeric characters)
       N - Custom version (any single digit number)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[5] AAAA - Color (any four digit number)
      BB - Macro Long style wand (ML)
       C - Waterway (5,6,8,9,C,D,E,G,H,K,L,M,N,P,R,T,U,or V)
       D - Circular insert (4 or 5)
       E - Spring (0,2,3 or 4)
       F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,P,Q,U,V,W,Y,Z,&, or £)
       G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16,51,A1,A2,A4,A6,A7,B1,B2,B3,B4,P1,P3, or P5)
       J - Packaging (any single digit number)
       K - Screen washer type (0,1, or 2)
       L - Unassigned (any single digit number)
      MM - Trigger cover insert (any two alpha or numeric characters)
       N - Custom version (any single digit number)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[12] AAAA - Color (any four digit number)
       BB - Signum style wand (BK,MB,MN,MX,SB,SL,SR, or ST)
       CC - Waterway 1 (A1,A2,A3,A4,B1,B2,B3,F1,F3,G1,G2,M1, or M2)
        D - Waterway 1.1 (0,1,2,3, or 4)
        E - Cap (1 or 2)
        F - Circular insert (1,2,3, or 4)
        G - Spring (0,1,2,4 or 6)
        H - Aerator (0,1,2,3,4,5,6,7,8,9,A,B,C,E,J,T or Q)
        I - Diverter stem assembly (1,2,3, or 4)
        J - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B,C,E, or F)
        K - Button/trigger cover (any single alpha or numeric character)
       LL - Faceplate style (A1,A2,A3,B1,B2,B3,C1,C2,C3,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,E1,E2 
            E3, or E4)
        M - Packaging (any single digit number)
        N - Screen washer type (0,1, or 2)

[2] AAAA - Color (any four digit number)
       B - Grafic style wand (G)
       C - Waterway (1,2,3,4,5,6,7,A,B,C,G,H,L,M,N, or P)
       D - Circular insert (1 or 2)
       E - Spring (0,2,3 or 4)
       F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,P,Q,U,V,W,Y,Z,&, or £)
       G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (01,03,12,13,14,15,16,17,18, or 23)
       J - Packaging (any single digit number)
       K - Screen washer type (0,1, or 2)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[11] AAAA - Color (any alpha numeric characters)
       BB - Idea Style wand (IB, IC, ID, IG, IL, IO, IY, or IZ)
        C - Waterway (0,1,2,3,4,5,6,7,8 or 9)
        D - Distributor (1,2,3,4,5,6,7,8, or 9)
        E - Spring (0,1,2, or 3)
        F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,N,P,Q,U,V,W,Y,Z,&, or £)
        G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,C, or D)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16,51,A1,A2,A4,A6,A7,B1,B2,B3,B4,P1,P2,P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0,1,2, or A)

[7] AAAA - Color (any four digit number)
      BB - Liberty style wand (LB)
       C - Waterway (5,6,7,8,9,C,E,G,H,K,L,M,N,P,R,T,U, or V)
       D - Circular insert (4 or 5)
       E - Spring (0,2,3 or 4)
       F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,P,Q,U,V,W,Y,Z,&, or £)
       G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16,51,A1,A2,A3,A4,A6,A7,B1,B2,B3,B4,P1,P2,P3, or P5)
       J - Packaging (any single digit number)
       K - Screen washer type (0,1, or 2)
       L - Handle ring trim (any single alpha or numeric character)
      MM - Handle (any two alpha or numeric characters)
       N - Head ring trim (any single alpha or numeric character)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] AAAA - Color (any four digit number)
       B - Studio style wand (S or Z)
       C - Waterway (1,2,3,4,5,6,7,8,9,B,C,E,G,H,K,L,M,N,P,R,T,U, or V)
       D - Circular insert (4 or 5)
       E - Spring (0,1,2,3, or 4)
       F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,P,Q,U,V,W,Y,Z,&, or £)
       G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
       H - Button/trigger cover (any single alpha or numeric character)
      II - Faceplate style (16,51,A1,A2,A4,A6,A7,B1,B2,B3,B4,P1,P2,P3, or P5)
       J - Packaging (any single digit number)
       K - Screen washer type (0,1, or 2)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
[10] AAAA - color (any four digit number)
       BB - Victoria style wand (VI or VA)
        C - Waterway (5,6,8,9,C,E,G,H,K,L,M,N,P,R,T,U, or V)
        D - Circular insert (4 or 5)
        E - Spring (0,2,3, or 4)
        F - Aerator (0,1,2,5,A,E,F,G,H,I,J,K,L,M,P,Q,U,V,W,Y,Z,&, or £)
        G - Flow controller (0,1,2,3,4,5,6,7,8,9,A,B, or C)
        H - Button/trigger cover (any single alpha or numeric character)
       II - Faceplate style (16,51,A1,A2,A4,A6,A7,B1,B2,B3,B4,P1,P3, or P5)
        J - Packaging (any single digit number)
        K - Screen washer type (0,1, or 2)
        L - Grip (any single alpha or numeric character)
       MM - (any two alpha or numeric characters)
        N - Custom version (any single alpha or numeric character)

[1] Fitting sizes are coded by the following conventions.
    XX:
    02 - 1/8"
    03 - 3/16"
    04 - 1/4"
    05 - 5/8"
    06 - 3/8"
    08 - 1/2"
    10 - 5/8"
    12 - 3/4"
    14 - 7/8"
    16 - 1"
    [YYYY]:
    0202 - 1/8" x 1/8"
    0204 - 1/8" x 1/4"
    0302 - 3/16" x 1/8"
    0304 - 3/16" x 1/4"
    0402 - 1/4" x 1/8"
    0404 - 1/4" x 1/4"
    0406 - 1/4" x 3/8"
    0408 - 1/4" x 1/2"
    0502 - 5/16" x 1/8"
    0504 - 5/16" x 1/4"
    0506 - 5/16" x 3/8"
    0602 - 3/8" x 1/8"
    0604 - 3/8" x 1/4"
    0606 - 3/8" x 3/8"
    0608 - 3/8" x 1/2"
    0610 - 3/8" x 5/8"
    0612 - 3/8" x 3/4"
    0706 - 7/16" x 3/8"
    0802 - 1/2" x 1/8"
    0804 - 1/2" x 1/4"
    0806 - 1/2" x 3/8"
    0808 - 1/2" x 1/2"
    0812 - 1/2" x 3/4"
    1006 - 5/8" x 3/8"
    1008 - 5/8" x 1/2"
    1012 - 5/8" x 3/4"
    1202 - 3/4" x 1/8"
    1204 - 3/4" x 1/4"
    1206 - 3/4" x 3/8"
    1208 - 3/4" x 1/2"
    1212 - 3/4" x 3/4"
    1408 - 7/8" x 1/2"
    1412 - 7/8" x 3/4"
    1416 - 7/8" x 1"
    1508 - 15/16" x 1/2"
    1512 - 15/16" x 3/4"
    1604 - 1" x 1/4"
    1606 - 1" x 3/8"
    1608 - 1" x 1/2"
    1612 - 1" x 3/4"
    1616 - 1" x 1"
    [ZZZZ]:
    0224 - 1/8" x 1/8", 1 1/2" Long Nipple
    0232 - 1/8" x 1/8", 2" Long Nipple
    0240 - 1/8" x 1/8", 2 1/2" Long Nipple
    0248 - 1/8" x 1/8", 3" Long Nipple
    0424 - 1/4" x 1/4", 1 1/2" Long Nipple
    0432 - 1/4" x 1/4", 2" Long Nipple
    0440 - 1/4" x 1/4", 2 1/2" Long Nipple
    0448 - 1/4" x 1/4", 3" Long Nipple
    0624 - 3/8" x 3/8", 1 1/2" Long Nipple
    0632 - 3/8" x 3/8", 2" Long Nipple
    0640 - 3/8" x 3/8", 2 1/2" Long Nipple
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[2] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - NPT threaded back plate elbow 
    0620108 (1/2" - 20mm) x 1/2" FIP
    0620110 (1/2" - 20mm) x 3/4" FIP
    0620112 (3/4" - 25mm) x 3/4" FIP
    0620113 (3/4" - 25mm) x 1/2" FIP
    
    Aquatherm Greenpipe® - Wing back 90 elbow
    0620158 (1/2" - 20mm) x 1/2" FIP
    
    Aquatherm Greenpipe® Transition Piece
    0621008 (1/2" - 20mm) x 1/2" FIP
    0621010 (1/2" - 20mm) x 3/4" FIP
    0621011 (3/4" - 25mm) x 1/2" FIP
    0621012 (3/4" - 25mm) x 3/4" FIP
    0621013 (1" - 32mm) x 3/4" FIP
    0621108 (1/2" - 20mm) x 1/2" FIP
    0621110 (1/2" - 20mm) x 3/4" FIP
    0621111 (3/4" - 25mm) x 1/2" FIP
    0621112 (3/4" - 25mm) x 3/4" FIP
    0621113 (1" - 32mm) x 3/4" FIP
    0621114 (1" - 32mm) x 1" FIP
    0621115 (1 1/4" - 40mm) x 1" FIP
    0621116 (1 1/4" - 40mm) x 1 1/4" FIP
    0621117 (1 1/2" - 50mm) x 1 1/4" FIP
    0621118 (1.5" - 50mm) x 1.5" FIP
    0621119 (2" - 63mm) x 1.5" FIP
    0621120 (2" - 63mm) x 2" FIP
    0621122 (2.5" - 75mm) x 2" FIP
    0621208 (1/2" - 20mm) x 1/2" MIP
    0621210 (1/2" - 20mm) x 3/4" MIP
    0621211 (3/4" - 25mm) x 1/2" MIP
    0621212 (3/4" - 25mm) x 3/4" MIP
    0621213 (1" - 32mm) x 3/4" MIP
    0621308 (1/2" - 20mm) x 1/2" MIP
    0621310 (1/2" - 20mm) x 3/4" MIP
    0621312 (3/4" - 25mm) x 3/4" MIP
    0621314 (1" - 32mm) x 1" MIP
    0621316 (1" - 32mm) x 1.25" MIP
    0621317 (1 1/4" - 40mm) x 1" MIP
    0621318 (1.25" - 40mm) x 1.25" MIP
    0621319 (1.5" - 50mm) x 1.25" MIP
    0621320 (1.5" - 50mm) x 1.5" MIP
    0621321 (2" - 63mm) x 1.5" MIP
    0621322 (2" - 63mm) x 2" MIP
    0621323 (2.5" - 75mm) x 2" MIP
    0621324 (2.5" - 75mm) x 2.5" MIP
    0621325 (3" - 90mm) x 3" MIP
    
[3] Certified for the following model numbers and descriptions:
    
    Aquatherm Greenpipe® - Transition Elbow
    0623008 (1/2" - 20mm) x 3/4" FIP NPT
    0623010 (1/2" - 20mm) x 1/2" FIP NPT
    0623012 (3/4" - 25mm) x 3/4" FIP NPT
    0623014 (3/4" - 25mm) x 1/2" FIP NPT
    0623016 (1" - 32mm) x 3/4" FIP NPT
    0623018 (1" - 32mm) x 1" FIP NPT
    0623208 (1/2" - 20mm) x 1/2" FIP NPT male/female
    0623506 (1/2" - 20mm) x 1/2" MIP NPT
    0623508 (1/2" - 20mm) x 3/4" MIP NPT
    0623510 (3/4" - 25mm) x 3/4" MIP NPT
    0623512 (1" - 32mm) x 3/4" MIP NPT
    0623514 (1" - 32mm) x 1" MIP NPT
    
    Aquatherm Greenpipe® - Transition Tee
    0625006 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" FIP
    0625008 (1/2" - 20mm) x (1/2" - 20mm) x 3/4" FIP
    0625010 (3/4" - 25mm) x (3/4" - 25mm) x 1/2" FIP
    0625012 (3/4" - 25mm) x (3/4" - 25mm) x 3/4" FIP
    0625014 (1" - 32mm) x (1" - 32mm) x 3/4" FIP
    0625016 (1" - 32mm) x (1" - 32mm) x 1" FIP
    0625022 (1.5" - 50mm) x (1.5" - 50mm) x 1" FIP
    0625506 (1/2" - 20mm) x (1/2" - 20mm) x 1/2" MIP
    Aquatherm Greenpipe® - Fusion Outlet
    0628214 (1.25"/3/4" - 40/25mm x 1/2" FIP)
    0628216 (1.5"/3/4" - 50/25mm x 1/2" FIP)
    0628218 (2"/3/4" - 63/25mm x 1/2" FIP)
    0628220 (2.5"/3/4" - 75/25mm x 1/2" FIP)
    0628222 (3"/3/4" - 90/25mm x 1/2" FIP)
    0628224 (3.5"/3/4" - 110/25mm x 1/2" FIP)
    0628226 (4"/3/4" - 125/25mm x 1/2" FIP)
    0628230 (6"/3/4" - 160/25mm x 1/2" FIP)
    0628232 (8-10"/3/4" - 200-250/25mm x 1/2" FIP)
    0628234 (1.25"/3/4" - 40/25mm x 3/4" FIP)
    0628236 (1.5"/3/4" - 50/25mm x 3/4" FIP)
    0628238 (2"/3/4" - 63/25mm x 3/4" FIP)
    0628240 (2.5"/3/4" - 75/25mm x 3/4" FIP)
    0628242 (3"/3/4" - 90/25mm/3/4" FIP)
    0628244 (3.5"/3/4" - 110/25mm/3/4" FIP)
    0628246 (4"/3/4" - 125/25mm x 3/4" FIP)
    0628250 (6"/3/4" - 160/25mm x 3/4" FIP)
    0628254 (8-10"/3/4" - 200-250/25mm x 3/4" FIP)
    0628260 (2.5"/1" - 75/32mm x 1" FIP)
    0628262 (3"/1" - 90/32mm x 1" FIP)
    0628264 (3.5"/1" - 110/32mm x 1" FIP)
    0628266 (4" x 1" - 125/32mm x 1" FIP)
    0628270 (6"/1" - 160/32mm x 1" FIP)
    0628274 (8-10"/1" - 200-250/32mm x 1" FIP)
    0628314 (1.25"/3/4" - 40/25mm x 1/2" MIP)
    0628316 (1.5"/3/4" - 50/25mm x 1/2" MIP)
    0628318 (2"/3/4" - 63/25mm x 1/2" MIP)
    0628320 (2.5"/3/4" - 75/25mm x 1/2" MIP)
    0628322 (3"/3/4" - 90/25mm x 1/2" MIP)
    0628324 (3.5"/3/4" - 110/25mm x 1/2" MIP)
    0628326 (4"/3/4" - 125/25mm x 1/2" MIP)
    0628330 (6"/3/4" - 160/25mm x 1/2" MIP)
    0628334 (1.25"/3/4" - 40/25mm x 3/4" MIP)
    0628336 (1.5"/3/4" - 50/25mm x 3/4" MIP)
    0628338 (2"/3/4" - 63/25mm x 3/4" MIP)
    0628340 (2.5"/3/4" - 75/25mm x 3/4" MIP)
    0628342 (3"/3/4" - 90/25mm x 3/4" MIP)
    0628344 (3.5"/3/4" - 110/25mm x 3/4" MIP)
    0628346 (4"/3/4" - 125/25mm x 3/4" MIP)
    0628350 (6"/3/4" - 160/25mm x 3/4" MIP)
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Product may also carry the designation "Fusiotherm®".
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[1] Product may also carry the designation "Fusiotherm®".
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.