These NSF Official Listings are current as of Friday, April 05, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=49950&
NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
| Watts Regulator Company | |
| 815 Chestnut Street | |
| North Andover, MA 01845 | |
| United States | |
| 978-689-6165 | |
| Visit this company's website |
Facility : # 1 Zhejiang, China
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Supply Stops |
||||
| BV38900X[4] | ||||
| BV38905X[4] | ||||
| BV38940X[4] | ||||
| BV38945X[4] | ||||
| BV88900X[4] | ||||
| BV88901X[4] | ||||
| BV88915X[4] | ||||
| BV89000X[4] | ||||
| BV89001X[4] | ||||
| BV89015X[4] | ||||
| BV89020X[4] | ||||
| BV89021X[4] | ||||
| BV89030X[4] | ||||
| BV89031X[4] | ||||
| BV89100X[4] | ||||
| BV89101X[4] | ||||
| BV89115X[4] | ||||
| BV89120X[4] | ||||
| BV89121X[4] | ||||
| BV89130X[4] | ||||
| BV89131X[4] | ||||
| BV89200X[4] | ||||
| BV89201X[4] | ||||
| BV89215X[4] | ||||
| BV89220X[4] | ||||
| BV89221X[4] | ||||
| BV89230X[4] | ||||
| BV89240X[4] | ||||
| BV89241X[4] | ||||
| BV89250X[4] | ||||
| BV89251X[4] | ||||
| BV89400X[4] | ||||
| BV89401X[4] | ||||
| BV89415X[4] | ||||
| BV89420X[4] | ||||
| BV89421X[4] | ||||
| BV89430X[4] | ||||
| BV89431X[4] | ||||
| LF-PBQT-090[1] [3] [G] | ||||
| LF-PBQT-100[1] [3] [G] | ||||
| LF-PBQT-110[1] [3] [G] | ||||
| LF-PBQT-113[1] [3] [G] | ||||
| LF-PBQT-118[1] [3] [G] | ||||
| LF-PBQT-122[1] [3] [G] | ||||
| LF-PBQT-210[1] [3] [G] | ||||
| LF-PBQT-213[1] [3] [G] | ||||
| LF-PBQT-218[1] [3] [G] | ||||
| LF-PBQT-222[1] [3] [G] | ||||
| LF-PBQT-290[1] [3] [G] | ||||
| LF-PBQT-310[1] [3] [G] | ||||
| LF-PBQT-600[1] [3] [G] | ||||
| LF-PBQT-610[1] [3] [G] | ||||
| LF-PBQT-710[1] [3] [G] | ||||
| LF-PBQT-810[1] [3] [G] | ||||
| LF-PBQTB-250[1] [3] [G] | ||||
| LF-PBQTC-270[1] [3] [G] | ||||
| LF-PBQTC-670[1] [3] [G] | ||||
| LF-PBQTP-650[1] [3] [G] | ||||
| LF-PBQTR-615[1] [3] [G] | ||||
| LF389000X[1] [2] [G] | ||||
| LF389200X[1] [2] [G] | ||||
| LF389400X[1] [2] [G] | ||||
| LF88900X[1] [2] [G] | ||||
| LF88901X[1] [2] [G] | ||||
| LF89000X[1] [2] [G] | ||||
| LF89001X[1] [2] [G] | ||||
| LF89020X[1] [2] [G] | ||||
| LF89030X[1] [2] [G] | ||||
| LF89120X[1] [2] [G] | ||||
| LF89121X[1] [2] [G] | ||||
| LF89200X[1] [2] [G] | ||||
| LF89201X[1] [2] [G] | ||||
| LF89215X[1] [2] [G] | ||||
| LF89240X[1] [2] [G] | ||||
| LF89241X[1] [2] [G] | ||||
| LF89400X[1] [2] [G] | ||||
| LF89401X[1] [2] [G] | ||||
| LF89415X[1] [2] [G] | ||||
| LF89501X[1] [2] [G] | ||||
| LF89601X[1] [2] [G] | ||||
| LFBV38900X[1] [3] [G] | ||||
| LFBV38940X[1] [3] [G] | ||||
| LFBV88900X[1] [3] [G] | ||||
| LFBV88901X[1] [3] [G] | ||||
| LFBV89000X[1] [3] [G] | ||||
| LFBV89001X[1] [3] [G] | ||||
| LFBV89020X[1] [3] [G] | ||||
| LFBV89115X[1] [3] [G] | ||||
| LFBV89120X[1] [3] [G] | ||||
| LFBV89121X[1] [3] [G] | ||||
| LFBV89131X[1] [3] [G] | ||||
| LFBV89200X[1] [3] [G] | ||||
| LFBV89201X[1] [3] [G] | ||||
| LFBV89240X[1] [3] [G] | ||||
| LFBV89241X[1] [3] [G] | ||||
| LFBV89250X[1] [3] [G] | ||||
| LFBV89251X[1] [3] [G] | ||||
| LFBV89400X[1] [3] [G] | ||||
| LFBV89421X[1] [3] [G] | ||||
| LFDV389400X[1] [2] [G] | ||||
| LFDV38941X[1] [2] [G] | ||||
| LFDV389431X[1] [2] [G] | ||||
| LFWPAS-2PB[1] [3] [G] | ||||
| LFWPAS-9PB[1] [3] [G] | ||||
| LFWPSS-1B[1] [3] [G] | ||||
| LFWPSS-3PB[1] [3] [G] | ||||
| LFWPSS-8PB[1] [3] [G] | ||||
| PBQT-090[4] | ||||
| PBQT-100[4] | ||||
| PBQT-110[4] | ||||
| PBQT-113[4] | ||||
| PBQT-118[4] | ||||
| PBQT-122[4] | ||||
| PBQT-210[4] | ||||
| PBQT-213[4] | ||||
| PBQT-218[4] | ||||
| PBQT-222[4] | ||||
| PBQT-290[4] | ||||
| PBQT-310[4] | ||||
| PBQT-600[4] | ||||
| PBQT-610[4] | ||||
| PBQT-622[4] | ||||
| PBQT-710[4] | ||||
| PBQT-722[4] | ||||
| PBQT-810[4] | ||||
| PBQTB-250[4] | ||||
| PBQTC-270[4] | ||||
| PBQTC-670[4] | ||||
| PBQTP-650[4] | ||||
| PBQTR-615[4] | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] Suffix "X"
1 - Rough brass
3 - Chrome plated
LK - Loose key system
LN - Less nut
PB - Polished brass
SD - Screw driver stem
WEL - With escutcheon and less compression nut
[3] Suffix "X"
3 – Chrome plated
LK – Loose key stem
LN – Less nut
PB – Polished brass
SD – Screw driver stem
WEL – With escutcheon and less compression nut
[4] Suffix "X"
3 - Chrome Plated
SD - Screw Driver Stem
LK - Loose Key Stem
WEL - With Escutcheon & Less Compression Nut
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : # 2 Zhejiang, China
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Flexible Plumbing Connectors |
||||
|
Reinforced Vinyl Dishwasher Supply Lines[1] [G] |
||||
| FS-CDC-P-CE[2] | ||||
| FS-CDC-P-FE[2] | ||||
| FS-CDC-S-CC[2] | ||||
| FS-CDC-S-CE[2] | ||||
| FS-CDC-S-FE[2] | ||||
| FSDW60 | ||||
| FSDW72 | ||||
| LF-CDC-A-CE Antimicrobial Connector[2] | ||||
| LF-CDC-S-CE[G] | ||||
| MFS SCC60-66EPB | ||||
| MFS SCC72-66EPB | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] FS - FloodSafe
CDC - Dishwasher connector
CFC - Faucet connector
CIC - Ice maker supply line
CTC - Toilet connector
A - Thread weave with coextruded clear vinyl with antimicrobial additive
P - Reinforced vinyl hose
S - Stainless steel braid over reinforced vinyl hose
Type of connection from supply (maximum inlet size 1/2"):
C - Compression end fitting
F - FIP end fitting
T - Fine thread FIP end fitting
Type of connection to fixture (maximum outlet size 7/8"):
B - Ballcock end fitting
C - Compression end fitting
E - MIP elbow end fitting
F - FIP end fitting
O - OD compression end fitting
Hose has I.D. of 0.28" and length of 6-72".
FS may be used as a prefix or be used after the first letter of the trade name that
begins with M or T to indicate the use of a Floodsafe check valve on the supply side end.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
|
Reinforced Vinyl Faucet Supply Lines[1] [G] |
||||
| LF-AMF20-68 Antimicrobial Connector | ||||
| LF-CFC-A-CF Antimicrobial Connector[2] | ||||
| LF-CFC-P-CC[2] | ||||
| LF-CFC-P-CF[2] | ||||
| LF-CFC-P-CO[2] | ||||
| LF-CFC-P-FF[2] | ||||
| LF-CFC-P-TF[2] | ||||
| LF-CFC-S-CC[2] | ||||
| LF-CFC-S-CF[2] | ||||
| LF-CFC-S-CO[2] | ||||
| LF-CFC-S-FF[2] | ||||
| LF-CFC-S-TF[2] | ||||
| LF-F12 | ||||
| LF-F16 | ||||
| LF-F16-88 | ||||
| LF-F20 | ||||
| LF-F20-88 | ||||
| LF-FC20-88 | ||||
| LF-M S12-88 | ||||
| LF-M S20-88 | ||||
| LF-M SC12-68 | ||||
| LF-M SC16-68 | ||||
| LF-M SC20-68 | ||||
| LF-M SC36-68 | ||||
| LF-SM12-68 Antimicrobial Connector | ||||
| LF-SM20-68 Antimicrobial Connector | ||||
| LF-TS12-88 Stainless Steel | ||||
| LF-TS20-88 Stainless Steel | ||||
| LF-TSC12-68 Stainless Steel | ||||
| LF-TSC16-68 Stainless Steel | ||||
| LF-TSC20-68 Stainless Steel | ||||
| LF-TSC30-68PB Stainless Steel | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] FS - FloodSafe
CDC - Dishwasher connector
CFC - Faucet connector
CIC - Ice maker supply line
CTC - Toilet connector
A - Thread weave with coextruded clear vinyl with antimicrobial additive
P - Reinforced vinyl hose
S - Stainless steel braid over reinforced vinyl hose
Type of connection from supply (maximum inlet size 1/2"):
C - Compression end fitting
F - FIP end fitting
T - Fine thread FIP end fitting
Type of connection to fixture (maximum outlet size 7/8"):
B - Ballcock end fitting
C - Compression end fitting
E - MIP elbow end fitting
F - FIP end fitting
O - OD compression end fitting
Hose has I.D. of 0.28" and length of 6-72".
FS may be used as a prefix or be used after the first letter of the trade name that
begins with M or T to indicate the use of a Floodsafe check valve on the supply side end.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
|
Reinforced Vinyl Icemaker Supply Lines |
||||
| CIC-P-CC[1] [3] [G] | ||||
| CIC-S-CC[1] [3] [G] | ||||
| FS-CIC-P-CC[1] [3] [G] | ||||
| FS-CIC-S-CC[1] [3] [G] | ||||
| FSK-7[1] [G] | ||||
| K-7[1] [G] | ||||
| M SCC120-44[1] [G] | ||||
| MFS SCC120-44[1] [G] | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[3] FS - FloodSafe
CIC - Ice Maker Supply Line
S - Stainless Steel Braid over Reinforced Vinyl Hose
P - Reinforced Vinyl Hose
Type of Connection From Supply (maximum inlet and outlet size 1/4")
C - Compression End Fitting
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
|
Reinforced Vinyl Toilet Supply Lines[1] [G] |
||||
| LF-AMT-16-614 Antimicrobial Connector | ||||
| LF-AMT12-614 Antimicrobial Connector | ||||
| LF-AMT20-614 Antimicrobial Connector | ||||
| LF-CSC-P-HH[2] | ||||
| LF-CTC-A-CB[2] | ||||
| LF-CTC-P-CB[2] | ||||
| LF-CTC-P-FB[2] | ||||
| LF-CTC-P-TB[2] | ||||
| LF-CTC-S-CB[2] | ||||
| LF-CTC-S-FB[2] | ||||
| LF-CTC-S-TB[2] | ||||
| LF-M SCT12-614W | ||||
| LF-M SCT16-614W | ||||
| LF-M SCT20-614W | ||||
| LF-M SCT9-614W | ||||
| LF-M ST12-814W | ||||
| LF-M ST20-814W | ||||
| LF-SMT12-614 Antimicrobial Connector | ||||
| LF-SMT20-614 Antimicrobial Connector | ||||
| LF-T12 | ||||
| LF-T12-814 | ||||
| LF-T20 | ||||
| LF-T20-814 | ||||
| LF-TC12-814 | ||||
| LF-TC20-814 | ||||
| LF-TSCT12-614W Stainless Steel | ||||
| LF-TSCT16-614W Stainless Steel | ||||
| LF-TSCT20-614W Stainless Steel | ||||
| LF-TSCT9-614W Stainless Steel | ||||
| LF-TST12-814 Stainless Steel | ||||
| LF-TST20-814 Stainless Steel | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] FS - FloodSafe
CDC - Dishwasher connector
CFC - Faucet connector
CIC - Ice maker supply line
CTC - Toilet connector
A - Thread weave with coextruded clear vinyl with antimicrobial additive
P - Reinforced vinyl hose
S - Stainless steel braid over reinforced vinyl hose
Type of connection from supply (maximum inlet size 1/2"):
C - Compression end fitting
F - FIP end fitting
T - Fine thread FIP end fitting
Type of connection to fixture (maximum outlet size 7/8"):
B - Ballcock end fitting
C - Compression end fitting
E - MIP elbow end fitting
F - FIP end fitting
O - OD compression end fitting
Hose has I.D. of 0.28" and length of 6-72".
FS may be used as a prefix or be used after the first letter of the trade name that
begins with M or T to indicate the use of a Floodsafe check valve on the supply side end.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
|
Supply Stops |
||||
| 1/2" PEX x PEX Kwik Stop[4] | ||||
| 389000X[4] | ||||
| 389015X[4] | ||||
| 389200X[4] | ||||
| 389300X[4] | ||||
| 389400X[4] | ||||
| 389415X[4] | ||||
| 3894203[4] | ||||
| 88900X[4] | ||||
| 88901X[4] | ||||
| 89000X[4] | ||||
| 89001X[4] | ||||
| 89015X[4] | ||||
| 89020X[4] | ||||
| 89021X[4] | ||||
| 89030X[4] | ||||
| 89031X[4] | ||||
| 89100X[4] | ||||
| 89101X[4] | ||||
| 89120X[4] | ||||
| 89121X[4] | ||||
| 89200X[4] | ||||
| 89201X[4] | ||||
| 89215X[4] | ||||
| 89220X[4] | ||||
| 89221X[4] | ||||
| 89300X[4] | ||||
| 89400X[4] | ||||
| 89401X[4] | ||||
| 89415X[4] | ||||
| 89420X[4] | ||||
| 89421X[4] | ||||
| 89430X[4] | ||||
| 89438X[4] | ||||
| 89448X[4] | ||||
| 89501X[4] | ||||
| 89601X[4] | ||||
| BV38900X[4] | ||||
| BV38905X[4] | ||||
| BV38940X[4] | ||||
| BV38945X[4] | ||||
| BV88900X[4] | ||||
| BV88901X[4] | ||||
| BV88925X[4] | ||||
| BV89000X[4] | ||||
| BV89001X[4] | ||||
| BV89015X[4] | ||||
| BV890203 | ||||
| BV89030X[4] | ||||
| BV89031X[4] | ||||
| BV89120X[4] | ||||
| BV891213[4] | ||||
| BV89121X[4] | ||||
| BV89131X[4] | ||||
| BV89200X[4] | ||||
| BV89201X[4] | ||||
| BV89240X[4] | ||||
| BV89241X[4] | ||||
| BV89400X[4] | ||||
| BV89401X[4] | ||||
| BV89415X[4] | ||||
| BV894203 | ||||
| BV89430X[4] | ||||
| BV89431X[4] | ||||
| DV389400X[4] | ||||
| DV38941X[4] | ||||
| DV389431X[4] | ||||
| DV38944X[4] | ||||
| F89000X[4] | ||||
| F89001X[4] | ||||
| F89015X[4] | ||||
| F890203[4] | ||||
| F89200X[4] | ||||
| F89220X[4] | ||||
| QC389403 | ||||
| QC889A | ||||
| QC889S | ||||
| QC894A | ||||
| QC894S | ||||
| QC89A | ||||
| QC89S | ||||
[4] Suffix "X"
1 - Rough brass
3 - Chrome plated
LK - Loose key stem
PB - Polished brass
SD - Screw driver stem
WEL - With escutcheon and less compression nut
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings |
||||
| 4501B-1008 Male NPT Connector | 1/2" | C. HOT | MLTPL | |
| 4501B-1412 Male NPT Connector | 3/4" | C. HOT | MLTPL | |
| 4501B-1812 Male NPT Reducing Connector | 1" x 3/4" | C. HOT | MLTPL | |
| 4501B-1816 Male NPT Connector | 1" | C. HOT | MLTPL | |
| 4510B-1008 Female NPT Connector | 1/2" | C. HOT | MLTPL | |
| 4510B-1412 Female NPT Connector | 3/4" | C. HOT | MLTPL | |
| 4510B-1812 Female NPT Reducing Connector | 1" x 3/4" | C. HOT | MLTPL | |
| 4510B-1816 Female NPT Connector | 1" | C. HOT | MLTPL | |
| 4515B-10 Union Connector | 1/2" | C. HOT | MLTPL | |
| 4515B-14 Union Connector | 3/4" | C. HOT | MLTPL | |
| 4515B-18 Union Connector | 1" | C. HOT | MLTPL | |
| 4515RB-1410 Reducing Union Connector | 3/4" x 1/2" | C. HOT | MLTPL | |
| 4515RB-1814 Reducing Union Connector | 1" x 3/4" | C. HOT | MLTPL | |
| 4516B-10 Slip Connector | 1/2" | C. HOT | MLTPL | |
| 4516B-14 Slip Connector | 3/4" | C. HOT | MLTPL | |
| 4516B-18 Slip Connector | 1" | C. HOT | MLTPL | |
| 4517B-10 Union Elbow | 1/2" | C. HOT | MLTPL | |
| 4517B-14 Union Elbow | 3/4" | C. HOT | MLTPL | |
| 4517B-18 Union Elbow | 1" | C. HOT | MLTPL | |
| 4517RB-1410 Reducing Union Elbow | 3/4" x 1/2" | C. HOT | MLTPL | |
| 4517RB-1814 Reducing Union Elbow | 1" x 3/4" | C. HOT | MLTPL | |
| 4518B-10 Stackable Union Elbow | 1/2" | C. HOT | MLTPL | |
| 4518B-14 Stackable Union Elbow | 3/4" | C. HOT | MLTPL | |
| 4518B-18 Stackable Union Elbow | 1" | C. HOT | MLTPL | |
| 4521B-1008 Drop Ear Elbow | 1/2" | C. HOT | MLTPL | |
| 4521B-1412 Drop Ear Elbow | 3/4" | C. HOT | MLTPL | |
| 4522B-10 Union Elbow 45° | 1/2" | C. HOT | MLTPL | |
| 4522B-14 Union Elbow 45° | 3/4" | C. HOT | MLTPL | |
| 4522B-18 Union Elbow 45° | 1" | C. HOT | MLTPL | |
| 4522SB-10 Stackable Union Elbow 45° | 1/2" | C. HOT | MLTPL | |
| 4522SB-14 Stackable Union Elbow 45° | 3/4" | C. HOT | MLTPL | |
| 4522SB-18 Stackable Union Elbow 45° | 1" | C. HOT | MLTPL | |
| 4523B-10 Union Tee | 1/2" | C. HOT | MLTPL | |
| 4523B-14 Union Tee | 3/4" | C. HOT | MLTPL | |
| 4523B-18 Union Tee | 1" | C. HOT | MLTPL | |
| 4524RB-141014 Reducing Union Tee | 3/4" x 1/2" x 3/4" | C. HOT | MLTPL | |
| 4524RB-141410 Reducing Union Tee | 3/4" x 3/4" x 1/2" | C. HOT | MLTPL | |
| 4524RB-181418 Reducing Union Tee | 1" x 3/4" x 1" | C. HOT | MLTPL | |
| 4524RB-181814 Reducing Union Tee | 1" x 1" x 3/4" | C. HOT | MLTPL | |
| 4526RB-141010 Double Reducing Union Tee | 3/4" x 1/2" x 1/2" | C. HOT | MLTPL | |
| 4526RB-181414 Double Reducing Union Tee | 1" x 3/4" x 3/4" | C. HOT | MLTPL | |
| 4531B-141614 Union Tee | 3/4" | D. HOT | MLTPL | |
| 4531B-181618 Union Tee | 1" | D. HOT | MLTPL | |
| 4545B-10 End Stop | 1/2" | C. HOT | MLTPL | |
| 4545B-14 End Stop | 3/4" | C. HOT | MLTPL | |
| 4545B-18 End Stop | 1" | C. HOT | MLTPL | |
Facility : # 4 Zhejiang, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Valves |
||||
| (1)-BF-(2)-(3)(4)(5)-(6)(7)[1] [2] [G] | 2" - 24" | CLD 23 | MLTPL | |
| 405 NRS F x F[1] [G] | 2 1/2" x 10" | CLD 23 | MLTPL | |
| 405 NRS F x G[1] [G] | 2 1/2" x 10" | CLD 23 | MLTPL | |
| FBV-3C | 1/4" - 4" | CLD 23 | MLTPL | |
| FBV-3C-QC | 1/2" - 1" | CLD 23 | MLTPL | |
| FBV-4 | 1/4" - 4" | CLD 23 | MLTPL | |
| FBVS-3C | 1/4" - 3" | CLD 23 | MLTPL | |
| FBVS-4 | 1/4" - 3" | CLD 23 | MLTPL | |
| LF 25AUB (X)[1] [3] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF N45(X)-(Y)-M1[1] [4] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LF N55(X)-(Y)-M1[1] [4] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LF-FBV[1] [G] | 1/4" - 2" | CLD 23 | MLTPL | |
| LF-FBV-4[1] [G] | 1/4" - 4" | CLD 23 | MLTPL | |
| LF-FBV-E[1] [G] | 1/4" - 2" | CLD 23 | MLTPL | |
| LF-FBV-E-LH[1] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-FBV-LH[1] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-FBV-M[1] [G] | 1/2" - 3/4" | CLD 23 | MLTPL | |
| LF-FBVS-4[1] [G] | 1/2" - 3" | CLD 23 | MLTPL | |
| LF-IS6301[1] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LF-IT6300[1] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LF-WBV-3[1] [G] | 1/8" - 4" | CLD 23 | MLTPL | |
| LF-WBVC-M1[1] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LF-WBVS-3[1] [G] | 3/8" - 3" | CLD 23 | MLTPL | |
| LFFBV-3C-X[1] [7] [G] | 1/4" - 4" | CLD 23 | MLTPL | |
| LFFBVS-3C-QC-X[1] [7] [G] | 1/2" - 1" | CLD 23 | MLTPL | |
| LFFBVS-3C-X[1] [7] [G] | 1/2" - 3" | CLD 23 | MLTPL | |
| LFTWH-2-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-2-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-2-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-CN-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FS-H-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-CN-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-FT-H-Z[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-QC-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-QC-CN[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-QC-H[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-US-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-US-CN[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-US-CN-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFTWH-US-H[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-US-H-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFTWH-UT-C[1] [5] [G] | 3/4" | D. HOT | MLTPL | |
| LFTWH-UT-CN[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-UT-CN-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFTWH-UT-H[1] [5] [G] | 3/4" - 1" | D. HOT | MLTPL | |
| LFTWH-UT-H-Z[1] [5] [G] | 1" | D. HOT | MLTPL | |
| LFX65B (x)-(Y)-Z1[1] [6] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LFX65B(X)-(Y)[1] [6] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| TWH-2-C[5] | 3/4" - 1" | D. HOT | MLTPL | |
| TWH-2-CN[5] | 3/4" | D. HOT | MLTPL | |
| TWH-2-H[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FS-CN[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FS-CN-Z[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FS-H[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FS-H-Z[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FT-C[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FT-CN-Z[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FT-H[5] | 3/4" | D. HOT | MLTPL | |
| TWH-FT-H-Z[5] | 3/4" | D. HOT | MLTPL | |
| TWH-QC-C[5] | 3/4" | D. HOT | MLTPL | |
| TWH-QC-CN[5] | 3/4" | D. HOT | MLTPL | |
| TWH-QC-H[5] | 3/4" | D. HOT | MLTPL | |
| TWH-US-C[5] | 3/4" - 1" | D. HOT | MLTPL | |
| TWH-US-CN[5] | 3/4" - 1" | D. HOT | MLTPL | |
| TWH-US-CN-Z[5] | 1" | D. HOT | MLTPL | |
| TWH-US-H[5] | 3/4" - 1" | D. HOT | MLTPL | |
| TWH-US-H-Z[5] | 1" | D. HOT | MLTPL | |
| TWH-UT-C[5] | 3/4" - 1" | D. HOT | MLTPL | |
| TWH-UT-CN[5] | 3/4" - 1" | D. HOT | MLTPL | |
| TWH-UT-CN-Z[5] | 1" | D. HOT | MLTPL | |
| TWH-UT-H[5] | 3/4" - 1" | D. HOT | MLTPL | |
| TWH-UT-H-Z[5] | 1" | D. HOT | MLTPL | |
| TWH-UTS-HCN[5] | 3/4" - 1" | CLD 23 | MLTPL | |
| WBV-3 M1 | 1/8" - 4" | CLD 23 | MLTPL | |
| WBVC-M1 | 1/2" - 1" | CLD 23 | MLTPL | |
| WBVS-3 M1 | 3/8" - 3" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] (1) Size: 02 - 24
(2) Body style
03 - Lug
04 - Wafer
(3) Body material
1 - Cast iron
2 - Ductile iron
(4) Disc material
2 - Aluminum bronze
3 - SS 316
(5) Shaft material
1 - Stainless steel 416
2 - Stainless steel 316
3 - Stainless steel 431
(6) Seat material
1 - EPDM (Canada)
4 - EPDM (US)
(7) Operator
0 - No handle
5 - Standard handle
G - Gear operator
P - Positioning/locking kit with handle
[3] (X) Suffixes indicate the following:
CPVC - CPVC tubing connection
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped w/gauge
HP - High pressure
LP - Low pressure
M3-Z6 - Water meter connections
PEX - Pex tubing connection
S - Solder Pipe Connection
SC - Sealed cage
S-DU - Double union solder inlet & outlet connections
Z10 - No union connection
Z3 - Sealed cage/corrosion resistant screws
Z7 - 400 psi max. inlet pressure
[4] LF - Lead free construction
(X) May be any combination of the following letters:
B - Bypass feature
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped w/ gauge
LP - Low pressure
U - Single union connection
(Y) May be any of the following:
CPVC - CPVC tubing connection
EZ - Easily adjustable w/ visible setting indicator
PEX - PEX tubing connection
S - Solder connection
SBrass - Sweat with brass tailpiece
THD - Standard threaded pipe connection, when used in combination with another
connection type
Z6 - Water meter connections
[5] This product has not been evaluated for use with end-point devices (tankless water
heaters used directly under a sink). H valves have a red handle and dielectric
insulator, are used on the outlet side of a tankless water heater, and do not contain an
internal check. CN valves have a blue handle and dielectric insulator, are used on the
inlet side of a tankless water heater, and do not contain an internal check. C valves
have a blue handle and dielectric insulator, are used on the inlet side of a tankless
water heater, and contain an internal check.
[6] LF - Lead free construction
(X) May be any combination of the following letters:
U - Single union connection
DU - Double union connection
S - Solder connection
(Y) May be any of the following:
G - Gauge tapping
HP - High pressure
RIK - Rough-In kit
Z1 - Suffix indicating customer special order.
[7] Suffix may include:
CC - Cap and chain
SS - Stainless steel ball and stem
TH - Tee handle
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Supply Stops |
||||
| 1/2" CTS x 3/8" COMP (QC389403) | ||||
| 1/2" CTS x 3/8" COMP (QC894A) | ||||
| 1/2" CTS x 3/8" COMP (QC894S) | ||||
| 1/2" CTS x 3/8" COMP (QC89A) | ||||
| 1/2" CTS x 3/8" COMP (QC89S) | ||||
| 3/8" CTS x 3/8" COMP (QC889A) | ||||
| 3/8" CTS x 3/8" COMP (QC889S) | ||||
|
Valves |
||||
| 0.50 FBV-3C-CC | ||||
| 0.50 FBVS-3C-CC | ||||
| 0.75 FBV-3C-CC | ||||
| 0.75 FBVS-3C-CC | ||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] [G] |
||||
| LF4501B-1008 Male NPT Connector | 1/2" | D. HOT | MLTPL | |
| LF4501B-1412 Male NPT Connector | 3/4" | D. HOT | MLTPL | |
| LF4501B-1416 Male NPT Connector | 3/4" x 1" | D. HOT | MLTPL | |
| LF4501B-1812 Male NPT Reducing Connector | 1" x 3/4" | D. HOT | MLTPL | |
| LF4501B-1816 Male NPT Connector | 1" | D. HOT | MLTPL | |
| LF4510B-1008 Female NPT Connector | 1/2" | D. HOT | MLTPL | |
| LF4510B-1412 Female NPT Connector | 3/4" | D. HOT | MLTPL | |
| LF4510B-1416 Female NPT Connector | 3/4" x 1" | D. HOT | MLTPL | |
| LF4510B-1812 Female NPT Reducing Connector | 1" x 3/4" | D. HOT | MLTPL | |
| LF4510B-1816 Female NPT Connector | 1" | D. HOT | MLTPL | |
| LF4515B-10 Union Connector | 1/2" | D. HOT | MLTPL | |
| LF4515B-14 Union Connector | 3/4" | D. HOT | MLTPL | |
| LF4515B-18 Union Connector | 1" | D. HOT | MLTPL | |
| LF4515RB-1410 Reducing Union Conn. | 3/4" x 1/2" | D. HOT | MLTPL | |
| LF4515RB-1814 Reducing Union Conn. | 1" x 3/4" | D. HOT | MLTPL | |
| LF4516B-10 Slip Connector | 1/2" | D. HOT | MLTPL | |
| LF4516B-14 Slip Connector | 3/4" | D. HOT | MLTPL | |
| LF4516B-18 Slip Connector | 1" | D. HOT | MLTPL | |
| LF4517B-10 Union Elbow | 1/2" | D. HOT | MLTPL | |
| LF4517B-14 Union Elbow | 3/4" | D. HOT | MLTPL | |
| LF4517B-18 Union Elbow | 1" | D. HOT | MLTPL | |
| LF4517RB-1410 Reducing Union Elbow | 3/4" x 1/2" | D. HOT | MLTPL | |
| LF4517RB-1814 Reducing Union Elbow | 1" x 3/4" | D. HOT | MLTPL | |
| LF4518B-10 Stackable Union Elbow | 1/2" | D. HOT | MLTPL | |
| LF4518B-14 Stackable Union Elbow | 3/4" | D. HOT | MLTPL | |
| LF4518B-18 Stackable Union Elbow | 1" | D. HOT | MLTPL | |
| LF4521B-1008 Drop Ear Elbow | 1/2" | D. HOT | MLTPL | |
| LF4521B-1412 Drop Ear Elbow | 3/4" | D. HOT | MLTPL | |
| LF4522B-10 Union Elbow 45 | 1/2" | D. HOT | MLTPL | |
| LF4522B-14 Union Elbow 45 | 3/4" | D. HOT | MLTPL | |
| LF4522B-18 Union Elbow 45 | 1" | D. HOT | MLTPL | |
| LF4522SB-10 Stackable Union Elbow 45 | 1/2" | D. HOT | MLTPL | |
| LF4522SB-14 Stackable Union Elbow 45 | 3/4" | D. HOT | MLTPL | |
| LF4522SB-18 Stackable Union Elbow 45 | 1" | D. HOT | MLTPL | |
| LF4523B-10 Union Tee | 1/2" | D. HOT | MLTPL | |
| LF4523B-14 Union Tee | 3/4' | D. HOT | MLTPL | |
| LF4523B-18 Union Tee | 1' | D. HOT | MLTPL | |
| LF4524RB-141014 Reducing Union Tee | 3/4" x 1/2" x 3/4" | D. HOT | MLTPL | |
| LF4524RB-141410 Reducing Union Tee | 3/4" x 3/4" x 1/2" | D. HOT | MLTPL | |
| LF4524RB-181418 Reducing Union Tee | 1" x 3/4" x 1" | D. HOT | MLTPL | |
| LF4524RB-181814 Reducing Union Tee | 1" x 1" x 3/4" | D. HOT | MLTPL | |
| LF4526RB-141010 Double Reducing Union Tee | 3/4" x 1/2" x 1/2" | D. HOT | MLTPL | |
| LF4526RB-181414 Double Reducing Union Tee | 1" x 3/4" x 3/4" | D. HOT | MLTPL | |
| LF4531B-141614 Union Tee | 3/4" x 3/4" x 1" | D. HOT | MLTPL | |
| LF4531B-181618 Union Tee | 1" x 1" x 1" | D. HOT | MLTPL | |
| LF4545B-10 End Stop | 1/2" | D. HOT | MLTPL | |
| LF4545B-14 End Stop | 3/4" | D. HOT | MLTPL | |
| LF4545B-18 End Stop | 1" | D. HOT | MLTPL | |
[1] LF prefix indicates low lead. Only LF products comply with Annex G. Products may or
may not have the LF prefix.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Kansas City, KS
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Strainer[G] |
||||
| P777-100 | 1/4" - 3/8" | CLD 23 | MLTPL | |
| P777-20 | 1/4" - 3/8" | CLD 23 | MLTPL | |
| P777-60 | 1/4" - 3/8" | CLD 23 | MLTPL | |
| P777-80 | 1/4" - 3/8" | CLD 23 | MLTPL | |
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Randolph, MA
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Thermal Expansion Tanks[G] |
||||
| PLT-35 | 14 gal. | D. HOT | MLTPL | |
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Kansas City, MO
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Pipe[G] |
||||
| PlumbFLOW | 1/8" - 2" | C. HOT | PEX | |
| RadiantFLOW | 1/8" - 2" | C. HOT | PEX | |
| RadiantPEX | 1/8" - 2" | C. HOT | PEX | |
| RadiantPEX+ (w/ O2 Barrier) | 1/8" - 1" | C. HOT | PEX | |
| WaterPEX | 1/8" - 2" | C. HOT | PEX | |
| Watts Heating PEX (w/ O2 Barrier) | 1/8" - 2" | C. HOT | PEX | |
| Watts Radiant PEX (w/ O2 Barrier) | 1/8" - 2" | C. HOT | PEX | |
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Franklin, NH
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Backflow Preventers |
||||
| (XX)007-YY-ZZ[1] [2] [G] | 1/2" | CLD 23 | MLTPL | |
| (XX)007M1-YY-ZZ[1] [2] [G] | 1" - 2" | CLD 23 | MLTPL | |
| (XX)007M2-YY-ZZ[1] [2] [G] | 1 1/4" - 1 1/2" | CLD 23 | MLTPL | |
| (XX)007M3-YY-ZZ[1] [2] [G] | 3/4" | CLD 23 | MLTPL | |
| (XX)009-YY-ZZ[1] [2] [G] | 1/4" - 1/2" | CLD 23 | MLTPL | |
| (XX)009M2-YY-ZZ[1] [2] [G] | 1" - 2" | CLD 23 | MLTPL | |
| (XX)009M3-YY-ZZ[1] [2] [G] | 3/4" | CLD 23 | MLTPL | |
| LF07SU2-2 | 1 1/2" , 2" | C. HOT | MLTPL | |
| LF719[8] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF7R[1] [7] [G] | 1/2" - 1" | C. HOT | MLTPL | |
| LF919[8] [G] | 1/2" - 2" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] XX - LF - Lead free
SS - Stainless steel
YY - LF - Supplied without shut-off valves
QT - Supplied with shut-off valves
ZZ - Any combination of the following:
Blank - Standard unit
BC - Brass cap
CT (or C & T) - Cap and teather
LH - Locking handles
S - Strainer (LF777SI)
SH - Stainless handles
Z3 - Stainless handles and nuts
Z4 - Non-removable handles
Z5 - Special dipped test cock adapter
[7] Two suffix codes, denoting the connections, follow the LF7R.
2: NPTF; female pipe connection [not a union] (1/2", 3/4", 1")
U2: NPTF female union pipe connection (1/2", 3/4", 1")
U3: NPTM; male union pipe connection (3/4")
10: Meter thread union connection (1")
The only Certified suffix combinations are:
U2-2
U2-U2
10-U2
10-U3
[8] Products may include one or more of the following prefixes or suffixes:
S - Lead Free Strainer
LF (as suffix) - Less fitting
LF (as prefix) - Lead free
QT - Quarter turn ball valve
Options for non-wetted:
C & T - Cap and tether test cock covers
LH - Locking handled ball valves
SH - Stainless handled ball valves
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
|
Valves[1] [G] |
||||
| (D) (LF) 25AUB (X)[3] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-223[5] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-N223-M1[5] | 2 1/2" | CLD 23 | MLTPL | |
| LF-N223-M2[5] | 3" | CLD 23 | MLTPL | |
| LF-N45(X)-M1[4] | 1/2" - 2" | CLD 23 | MLTPL | |
| LF-N55(X)-M1[4] | 1/2" - 2" | CLD 23 | MLTPL | |
| P60-M1 | 1/4" | CLD 23 | MLTPL | |
| P60-M1-4 | 1/4" | CLD 23 | MLTPL | |
| Series LF-5[6] | 1/2" - 2" | CLD 23 | MLTPL | |
| Series LF-L5[6] | 1/2" - 2" | CLD 23 | MLTPL | |
| Series LF-U5[6] | 1/2" - 2" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[3] (D) Domestic manufacture
(X) May be any combination of the following:
CPVC - CPVC tubing connection
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped with gauge
HP - High pressure
LP - Low pressure
M3-Z6- Water meter connections
PEX - PEX tubing connection
S - Solder pipe connection
SC - Sealed cage
S-DU - Double union solder inlet & outlet connections
STD - Standard model
Z3 - Sealed cage/corrosion resistant screws
Z7 - 400 psi
Z10 - No union connection
[4] (X) May be any combination of the following:
B - Bypass feature
DU - Double union connection
G - Gauge tapping
GG - Gauge tapped with gauge
LP - Low pressure
U - Single union connection
[5] Suffixes:
B - Built-in bypass
BS - British thread
G - Gauge tapping
GG - Gauge tapped with gauge
HP - High pressure
LP - Low pressure
S - Strainer attached
STD - Standard
[6] B - Bypass feature
G - Guage tapping
GG - Guage tapped with guage
HP - High pressure
LP - Low pressure
M3-Z6 - Water meter connections (3/4" & 1")
S - Solder pipe connection
SC - Sealed cage
Z3 - Sealed cage/corrosion resistant screws
Z9 - NPT Male thread union inlet (3/4")
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Mechanical Plumbing Devices
| Trade Designation | ||||
|
End Point Control Valves |
||||
| 0.375 LFUSGM1-B[1] [G] | ||||
| 0.375 LFUSGM1-B-SC[1] [G] | ||||
| 0.375 LFUSGM1-P[1] [G] | ||||
| 0.375 LFUSGM2-B[2] [G] | ||||
| 0.375 LFUSGM2-B-SC[2] [G] | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] Optional QC indicating quick connect fitting.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
|
Faucets[1] [3] [G] |
||||
| 1070 Thermostatic Faucet | ||||
| 1070-6 Thermostatic Faucet | ||||
| 1070A15 Thermostatic Faucet | ||||
| 1070A5 Thermostatic Faucet | ||||
| 1070PW Thermostatic Faucet | ||||
| G1070 Thermostatic Faucet | ||||
| G1070A5 Thermostatic Faucet | ||||
| G1070PW Thermostatic Faucet | ||||
| GP1070 Thermostatic Faucet | ||||
| GP1070A5 Thermostatic Faucet | ||||
| GP1070PW Thermostatic Faucet | ||||
| P1070 Thermostatic Faucet | ||||
| P1070-6 Thermostatic Faucet | ||||
| P1070A15 Thermostatic Faucet | ||||
| P1070A5 Thermostatic Faucet | ||||
| P1070PW Thermostatic Faucet | ||||
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[3] Suffixes:
-6 - 6" Handle (4" is the default size)
A15 - Aerator flow rate is 1.5 gpm
A5 - Aerator flow rate is 0.5 gpm (default flow rate is 2.0 GPM)
GD - Grid Drain
OGD - Offset Grid Drain
L – Laminar flow outlet
L5 – 0.5 gpm laminar flow outlet
PW - Faucet has pop-up waste stopper
VA - Vandal-resistant aerator
V5 – Vandal-resistant 0.5 gpm aerator
VL - Vandal-resistant laminar flow outlet
VL5 - Vandal-resistant 0.5 gpm laminar flow outlet
Prefixes:
G - Gooseneck spout
P - Deck plate
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
|
Thermostatic Mixing Valves |
||||
| 3/8 USG-DP-M1 Thermostatic Mixing Valves | ||||
| 3/8 USG-P Thermostatic Mixing Valve | ||||
| 3/8 USG-P-M1 Thermostatic Mixing Valves | ||||
Facility : Chesnee, SC
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings |
||||
| WPEX | 3/8" - 1" | C. HOT | BRASS | |
Facility : Ningbo, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Strainer[1] [G] |
||||
| LF777 SI | 3/8" - 3" | CLD 23 | MLTPL | |
| LF777SI-PART | 3/8" - 3" | CLD 23 | MLTPL | |
| LFS777 SI | 1/2" - 2" | CLD 23 | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Shanghai, China
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Manifolds[1] [G] |
||||
| QC Quick Connect WPQCM-5 | [2] | D. HOT | MLTPL | |
| WPPM-12-M3BB | [5] | D. HOT | MLTPL | |
| WPPM-12-M4AB | [11] | D. HOT | MLTPL | |
| WPPM-12-M4BB | [11] | D. HOT | MLTPL | |
| WPPM-1212-M2AF | [3] | D. HOT | MLTPL | |
| WPPM-1212-M3AF | [6] | C. HOT | MLTPL | |
| WPPM-1212-M3BF | [6] | D. HOT | MLTPL | |
| WPPM-1212-M4AF | [4] | D. HOT | MLTPL | |
| WPPM-1212-M4BF | [4] | D. HOT | MLTPL | |
| WPPM-16-M6AB | [9] | D. HOT | MLTPL | |
| WPPM-1612-M4AF | [7] | D. HOT | MLTPL | |
| WPPM-1612-M6AF | [8] | D. HOT | MLTPL | |
| WPPM-1616-M6AF | [10] | D. HOT | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[2] 1" inlet & outlet x five 1/2" ports
[3] 3/4" inlet & outlet x two 1/2" ports
[4] 3/4" inlet & outlet x four 1/2" ports
[5] 3/4" inlet x three 1/2" ports
[6] 3/4" inlet & outlet x three 1/2" ports
[7] 1" inlet & 3/4" outlet x four 1/2" ports
[8] 1" inlet & 3/4" outlet x six 1/2" ports
[9] 1" inlet x six 1/2" ports
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
[10] 1" inlet & outlet x six 1/2" ports
[11] 3/4" inlet x four 1/2" ports
|
||||
Pipes and Related Products
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Fittings[1] [G] |
||||
| WPEX | 3/8" - 1" | C. HOT | MLTPL | |
[1] Products have a marking exemption which allow product NSF-61 Marking and labels bearing
the <= 0.25%.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Nogales, Sonara, Mexico
Mechanical Plumbing Devices
| Trade Designation | ||||
|
Flexible Plumbing Connectors |
||||
| 1/2" x 1/2" D-CFC-S-FFx06[1] | ||||
| 1/2" x 1/2" LFD-CFC-FFx20[2] [G] | ||||
[1] Hose length is 6".
[2] Hose length is 20".
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Facility : Taichung, Taiwan
Mechanical Devices
| Water | Water | |||
| Contact | Contact | |||
| Trade Designation | Size | Temp | Material | |
|
Thermal Expansion Tanks[G] |
||||
| PLT-12 | 19 L | D. HOT | MLTPL | |
| PLT-20 | 34 L | D. HOT | MLTPL | |
| PLT-5 | 8 L | D. HOT | MLTPL | |
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
||||
Number of matching Manufacturers is 1
Number of matching Products is 561
Processing time was 0 seconds