These NSF Official Listings are current as of Sunday, February 03, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.

Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/PwsComponents/Listings.asp?Company=C0045063&


NSF/ANSI STANDARD 61
Drinking Water System Components - Health Effects

NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact Material shown in the Listing.  Click here for a list of Abbreviations used in these Listings.

 
Powers, a Watts Water Technologies Co. 
815 Chestnut Street
North Andover, MA 01845 
United States 
978-688-1811

Facility : Franklin, NH

Mechanical Plumbing Devices

  Trade Designation      

Faucets[1] [G]
  0215-6 Thermostatic Faucet      
  105 Thermostatic Faucet      
  105-6 Thermostatic Faucet      
  105A15 Thermostatic Faucet      
  105A5 Thermostatic Faucet      
  105PW Thermostatic Faucet      
  115 Thermostatic Faucet      
  115-6 Thermostatic Faucet      
  115A15 Thermostatic Faucet      
  115A5 Thermostatic Faucet      
  115PW Thermostatic Faucet      
  205 Thermostatic Faucet      
  205A5 Thermostatic Faucet      
  205PW Thermostatic Faucet      
  215 Thermostatic Faucet      
  215A5 Thermostatic Faucet      
  215PW Thermostatic Faucet       

[1] Prefixes:
    G - Gooseneck spout
    P - Deck plate
    Suffixes:
    -6  - 6" Handle (4" is the default size)
    A15 - Aerator flow rate is 1.5 GPM
    A5  - Aerator flow rate is 0.5 GPM (default flow rate is 2.0 GPM)
    GD  - Grid drain
    L   - Laminar flow outlet 
    L5  - 0.5 gpm laminar flow outlet 
    OGD - Offset grid drain
    PW  - Faucet has pop-up waste stopper
    VA  - Vandal-resistant aerator 
    V5  – Vandal-resistant 0.5 gpm aerator 
    VL  - Vandal-resistant laminar flow outlet 
    VL5 - Vandal-resistant 0.5 gpm laminar flow outlet
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's 
    Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
    Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.

Number of matching Manufacturers is 1
Number of matching Products is 17
Processing time was 0 seconds