Leveraging Your NSF Certification: Now that you've received NSF Certification ... why not leverage the Mark to your advantage.
The following is a listing of NSF testing capabilities to various standards from:
Should you have any questions about NSF Services, please feel free to contact staff of the NSF Plumbing Program at plumbing@nsf.org
Standard |
Description |
|
| NSF Standard 3 | Commercial Spray-Type Dishwashing and Glasswashing Machines | |
| NSF Standard 5 | Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment | |
| NSF Standard 12 | Automatic Ice Making Equipment | |
| NSF Standard 14 | Plastics Piping System Components and Related Materials | |
| NSF Standard 24 | Plumbing System Components for MFR Homes and RVs | |
| NSF Standard 42 | Drinking Water Treatment Units – Aesthetic Effects | |
| NSF Standard 44 | Residential Cation Exchange Water Softeners | |
| NSF Standard 50 | Equipment for Pools, Spas, Hot Tubs, and Other Recreational Water Facilities | |
| NSF Standard 51 | Food Equipment Materials | |
| NSF Standard 53 | Drinking Water Treatment Units – Health Effects | |
| NSF Standard 55 | Ultraviolet Microbiological Water Treatment Systems | |
| NSF Standard 58 | Reverse Osmosis Drinking Water Treatment Systems | |
| NSF Standard 60 | Drinking Water Chemicals | |
| NSF Standard 61 | Drinking Water System Components - Health Effects | |
| NSF Standard 62 | Drinking Water Distillation Systems | |
| NSF Standard 359 | Valves for Crosslinked Polyethylene (PEX) Water Distribution Tubing Systems | |
| NSF Standard 372 | Drinking Water System Components - Lead Content | |
| ASSE 1001 | Pipe Applied Atmospheric Type Vacuum Breaker | |
| ASSE 1002 | Water Closet Flush Tank Ball Cocks | |
| ASSE 1003 | Water Pressure Reducing Valves | |
| ASSE 1004 | Commercial Dishwashing Machines | |
| ASSE 1005 | Water Heater Drain Valves | |
| ASSE 1006 | Residential Use Dishwashers | |
| ASSE 1007 | Home Laundry Equipment | |
| ASSE 1008 | Household Food Waste Disposer Units | |
| ASSE 1009 | Commercial Food Waste Grinder Units | |
| ASSE 1010 | Water Hammer Arresters | |
| ASSE 1011 | Hose Connection Vacuum Breaker | |
| ASSE 1012 | Backflow Prevention with Atmospheric Vent | |
| ASSE 1013 | Reduced Pressure Principle Backflow Preventer | |
| ASSE 1014 | Hand-Held Showers | |
| ASSE 1015 | Double Check Backflow Prevention Assembly | |
| ASSE 1016 | Individual Thermostatic Pressure Balancing and Combination Control Valves for Bathing Facilities | |
| ASSE 1017 | Temperature Actuated Mixing Valves for Primary Domestic Use | |
| ASSE 1018 | Trap Seal Primer Valves – Water Supply Fed | |
| ASSE 1019 | Vacuum Breaker Wall Hydrants, Frost Resistant Automatic Draining Type | |
| ASSE 1020 | Pressure Vacuum Breaker Assembly | |
| ASSE 1021 | Drain Air Gaps for Domestic Dishwasher Applications | |
| ASSE 1022 | Backflow Preventer for Carbonated Beverage Machine | |
| ASSE 1023 | Hot Water Dispenser, Household Storage Type Electric | |
| ASSE 1024 | Dual Check Valve Type Backflow Preventers | |
| ASSE 1025 | Diverters for Plumbing Faucets with Hose Spray, Anti-siphon Type, Residential Applications | |
| ASSE 1028 | Automatic Flow Controllers | |
| ASSE 1029 | Water Supply Valves: Mixing | |
| ASSE 1032 | Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers, Post Mix Type | |
| ASSE 1034 | Fixed Flow Restrictors | |
| ASSE 1035 | Laboratory Faucet Backflow Preventers | |
| ASSE 1037 | Pressurized Flushing Devices for Plumbing Fixtures | |
| ASSE 1043 | Cast Iron Solvent Sanitary Drainage Systems | |
| ASSE 1044 | Trap Seal Primer Valves – Drainage Type | |
| ASSE 1045 | Aluminum Drain, Waste and Vent Pipe with End Cap | |
| ASSE 1046 | Thermal Expansion Relief Valve | |
| ASSE 1047 | Reduced Pressure Detector BFP | |
| ASSE 1048 | Double Check Detector BFP | |
| ASSE 1050 | Air Admittance Valves-Stack | |
| ASSE 1051 | Air Admittance Valves | |
| ASSE 1052 | Hose Connection Backflow Preventers | |
| ASSE 1056 | Back Siphonage Vacuum Breakers | |
| ASSE 1061 | Performance Requirements for Push Fit Fittings | |
| ASSE 1062 | Temperature Activated Flow Reduction Valves | |
| ASSE 1064 | Performance Requirements for Backflow Prevention Assembly Field Test Kits | |
| ASSE 1066 | Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings | |
| ASSE 1069 | Performance Requirements for Automatic Temperature Control Mixing Valves | |
| ASSE 1070 | Performance Requirements for Water Temperature Limiting Devices | |
| ASSE 1071 | Performance Requirements for Temperature Actuated Mixing Valves for Plumbed Emergency Equipment | |
| ASSE 1079 | Performance Requirements for Dielectric Pipe Unions | |
| ASME A112.1.2 | Air Gaps in Plumbing Systems | |
| ASME A112.1.3 | Air Gap Fittings for use with Plumbing Fixtures, Appliances and Appurtenances | |
| ASME A112.3.1 | Performance Standard and Installation Procedures for Stainless Steel Drainage Systems for Sanitary, Storm and Chemical Applications | |
| ASME A112.3.4 | Macerating Toilet Systems and Related Components | |
| ASME A112.4.3 | Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System | |
| ASME A112.4.14 | Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems | |
| ASME A112.6.1M | Supports for Off-the-Floor Plumbing Fixtures | |
| ASME A112.6.3 | Floor and Trench Drains | |
| ASME A112.14.1 | Backwater Valves | |
| ASME A112.14.3 | Grease Interceptors | |
| ASME A112.14.4 | Grease Removal Devices | |
| ASME A112.18.1/CSA B125.1 | Plumbing Fixture Fittings | |
| ASME A112.18.2/CSA B125.2 | Plumbing Waste Fittings | |
| ASME A112.18.3 | Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings | |
| ASME A112.18.6/CSA B125.6 | Flexible Water Connectors | |
| ASME A112.18.7 | Deck Mounted Bath/Shower transfer valves with Internal Backflow Protection | |
| ASME A112.19.1/CSA B45.2 | Enameled Cast Iron and Enameled Steel Plumbing Fixtures | |
| ASME A112.19.2/CSA B45.1 | Vitreous China Plumbing Fixtures | |
| ASME A112.19.3/CSA B45.4 | Stainless Steel Plumbing Fixtures | |
| ASME A112.19.4M | Porcelain Enameled Formed Steel Plumbing Fixtures | |
| ASME A112.19.5/CSA B45.15 | Trim for Water-Close Bowls, Tanks, and Urinals | |
| ASME A112.19.6 | Hydraulic requirements for Water Closets and Urinals | |
| ASME A112.19.7/CSA B45.10 | Hydromassage Bathtub Systems | |
| ASME A112.19.8M | Suction Fittings for Use in Swimming Pool, Wading Pools, Spas, Hot Tubs and Whirlpool | |
| ASME A112.19.9M | Non-Vitreous Ceramic Plumbing Fixtures | |
| ASME A112.19.10 | Dual Flush Devices for Water Closets | |
| ASME A112.19.14 | Six-Liter Water Closets Equipped with a Dual Flushing Device | |
| ASME A112.19.15 | Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors | |
| ASME A112.21.1M | Floor Drains (Revision to be redesignated A112.6.3M) | |
| ASME A112.21.3M | Hydrants for Utility and Maintenance Use (revision to be redesignated A112.6.5M) | |
| ASME A112.36.2M | Cleanouts | |
| ASME B16.15 | Cast Copper Alloy Threaded Fittings: Classes 125 and 250 | |
| ASME B16.18 | Cast Copper Alloy Solder Joint Pressure Fittings | |
| ASME B16.22 | Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings | |
| ASME B40.1 | Pressure Gauges and Gauge Attachments | |
| ASTM A536 | Standard Specification for Ductile Iron Castings | |
| ASTM A74 | Standard Specification for Cast Iron Soil Pipe and Fittings | |
| ASTM B251 | Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube | |
| ASTM B280 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Services | |
| ASTM B306 | Standard Specification for Copper Drainage Tube (DWV) | |
| ASTM B68 | Standard Specification for Seamless Copper Tube, Bright Annealed | |
| ASTM B75 | Standard Specification for Seamless Copper Tube | |
| ASTM B813 | Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube | |
| ASTM B88 | Standard Specification for Seamless Copper Water Tube | |
| ASTM B819 | Standard Specification for Seamless Copper Tube for Medical Gas Systems | |
| ASTM C564 | Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings | |
| ASTM C1277 | Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings | |
| ASTM F1476 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications | |
| ASTM F1548 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications | |
| ASTM C1540 | Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings | |
| ASTM D4551 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water Containment Membrane | |
| ASTM D6284 | Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine | |
| ANSI Z124.1 | For Plastic Bathtub Units | |
| ANSI Z124.1.2 | Plastic Bathtub and Shower Units | |
| ANSI Z124.2 | For Plastic Show Units | |
| ANSI Z124.3 | For Plastic Lavatories | |
| ANSI Z124.4 | For Plastic Water Closet Bowls and Tanks | |
| ANSI Z124.5 | For Plastic Toilet (Water Closets) Seats | |
| ANSI Z124.6 | For Plastic Sinks | |
| ANSI Z124.7 | For Prefabricated Plastic Spa Shells | |
| ANSI Z124.8 | For Plastic Bathtub Liners | |
| ANSI Z124.9 | For Plastic Urinal Fixtures | |
| AWWA C115 | AWWA Standard for Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges | |
| AWWA C510 | AWWA Standard for Double-Check Valve Backflow-Prevention Assembly | |
| AWWA C511 | AWWA Standard for Reduced-Pressure-Principle Backflow-Prevention Assembly | |
| AWWA C606 | AWWA Standard for Grooved and Shouldered Joints | |
| CISPI 301 | Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste and Vent Piping Applications | |
| CISPI 310 | Couplings for use in connection with Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | |
| CSA B125.1 | Harmonized with ASME A112.18.1 Plumbing Supply Fittings | |
| CSA B125.2 | Harmonized with ASME A112.18.2 Plumbing Waste Fittings | |
| CSA B125.3 | Plumbing Fittings | |
| CSA B125.6 | Harmonized with ASME A112.18.6 Flexible Water Connectors | |
| CSA B45.1 | Harmonized with ASME A112.19.2 Ceramic Plumbing Fixtures | |
| CSA B45.2 | Harmonized with ASME A112.19.1 Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures | |
| CSA B45.4 | Harmonized with ASME A112.19.3 Stainless Steel Plumbing Fixtures | |
| CSA B45.5 | Harmonized with IAPMO Z124 Plastic Plumbing Fixtures | |
| CSA B45.6 | Nonrecirculating Toilets, Vacuum Oilets, and Waste-Holding Tanks for Use in Recreational Vehicles | |
| CSA B45.10 | Harmonized with ASME A112.19.7 Hydromassage Bathtub Systems | |
| CSA B45.15 | Harmonized with ASME A112.19.5 Flush Vavles and Spuds for Water Closets, Urinals, and Tanks | |
| CSA B66 | Design, Material, and Manufracturing Requirements for Prefabricated Septic Tanks and Sewage Holding Tanks | |
| CSA B64 Series | Backflow Preventers and Vacuum Breakers | |
| CSA B356 | Water Pressure Reducing Valves for Domestic Water Supply Systems | |
| CSA B481.1 | Grease Interceptors | |
| CSA MSE-13 | Mechanical Type Fittings for joining Copper Tubing for Hot and Cold Water Supply | |
| CSA Z240.3.2 | Recreational Vehicles | |
| IAPMO IGC 81 | Pedestal Lavatory Traps | |
| IAPMO IGC 137 | Press Type Copper and Copper Alloy Fittings | |
| IAPMO IGC 157 | PBall Valves | |
| IAPMO IGC 188 | Removable and Non-Removable Push Fit Fittings | |
| IAPMO IGC 195 | Floor Drain with Integrated Bonding Flange | |
| IAPMO PS 1 | Prefabricated Septic Tanks | |
| IAPMO PS 14 | Flexible Metallic Water Connectors | |
| IAPMO PS 16 | Subdrains for Built-Up Shower Pans | |
| IAPMO PS 36 | Lead Free Sealing Compounds for threaded joints | |
| IAPMO PS 44 | Shielded Transition Couplings for use with dissimilar DWV Pipe and Fittings above ground | |
| IAPMO PS 50 | Flush Valve with Dual Flush Device for Water closet or Water Closet Tank with Integral Flush Valve with Dual Flush Device | |
| IAPMO PS 65 | Air Gap Units, Water Conditioning Equipment Installation | |
| IAPMO PS 72 | Valves with Atmospheric Vacuum Breaker | |
| IAPMO PS 74 | Reinforced Flexible Water Connectors (Includes Corrosion) | |
| IAPMO PS 76 | Ballcock or Flushometer Valve Tailpiece Trap Primers & Trap Primer Receptors/Adapters | |
| IAPMO PS 88 | Pre-pressurized Potable Water Tanks | |
| IAPMO PS 92 | Heat Exchangers and Indirect Water Heaters | |
| IAPMO PS 95 | Drain, Waste, and Vent Hangers and Plastic Pipe Support Hooks | |
| IAPMO PS XX-99 | Elastomeric Fitting (Under Sink Coupling) | |
| IAPMO PS 101 | Suction Relief Valves | |
| IAPMO PS 117 | Copper and Copper Alloy Tubing System Incorporating Press-Type of Nail-Type Connections | |
| IAPMO Z1000 | Prefabricated Septic Tanks | |
| WaterSense | EPA WaterSense Specification for High-Efficiency Lavatory Faucets | |
| WaterSense | EPA WaterSense Specification for Tank-Type High-Efficiency Toilets | |
| WaterSense | EPA WaterSense Specification for High-Efficiency Flushing Urinals | |