These NSF Official Listings are current as of Saturday, May 18, 2013 at 12:15 a.m. Eastern Time. Please contact NSF International to confirm the status of any Listing, report errors, or make suggestions.
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm this information by clicking on the below link for the most accurate information: http://www.nsf.org/Certified/Plumbing/Listings.asp?ProductStandard=ASME+A112%2E18%2E1%2FCSA&
NSF/ANSI 14
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
Plastics Piping System Components and Related Materials
Click here for a list of End Use Code Designations.
Click on Product Standards or footnote in blue to view the referenced document
| Linx, Limited | |
| 875 Aquidneck Avenue | |
| Middletown, RI 02842 | |
| United States | |
| 401-841-0600 |
Facility : # 3 Zhejiang Province, China
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Supply Stops˘ § ++ [G] |
Brass C69300 |
Unigrip Supply Stops |
ASME A112.18.1/CSA B125.1 |
| E9601-0504 1/2" UG x 3/8" Comp (straight) | E9601-0503 1/2" UG x 1/4" Comp (straight) | E9802-0505 1/2" UG x 1/2" MNPT (angle) | E9602-0506 1/2" x 5/8" Comp (angle) |
| E9601-0506 1/2" UG x 5/8" Comp (straight) | E9702-0505 1/2" x 1/2" UG (angle) | E9601-0505 1/2" UG x 1/2" Comp (straight) | E9602-0503 1/2" x 1/4" Comp (angle) |
| E9701-0505 1/2" x 1/2" UG (straight) | E9801-0505 1/2" UG x 1/2" MNPT (straight) | E9602-0504 1/2" x 3/8" Comp (angle) | E9602-0505 1/2" x 1/2" Comp (angle) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
| Technologia Hidraulica THC S.A. | |
| Mar del Sur No 7481 | |
| P.O. Box 347-V | |
| Barrio Industrial Pudahuel | |
| Pudahuel, Santiago, | |
| Chile | |
| 56 2 749 1002 |
Facility : Santiago, Chile
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Straight Stop Valve˘ +++ [2] [G] |
MLTPL |
Flair-It Plus |
ASME A112.18.1/CSA B125.1 |
| 1/2" p x 1/2" p (7880) | |||
| 1/2" p x 1/2" fpt sw (7890) | |||
| 1/2" p x 1/2" fpt sw (7891) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[2] For use with the Flair-It Two-Port and Four-Port Manifolds (product numbers 7960 and
7961).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Straight Stop Valve˘ +++ [G] |
MLTPL |
Flair-It Insert** |
ASME A112.18.1/CSA B125.1 |
| 1/2" Barb (28879) | |||
| 1/2" Barb x 1/2" Swivel (28890) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** These products are also represented by the trade names: THC and ECOPOLY.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves# ˘ ++ [G] |
POM |
Flair-it (Line-A)* |
ASME A112.18.1/CSA B125.1 |
|
3-Way Valve "T" port |
|||
| 3/8" p x 3/8" p x 3/8" p (6900) | 1/2" p x 1/2" p x 1/2" p (6910) | 1/2" p x 1/2" mpt x 1/2" p (6912) | 1/2" swivel x 1/2" p x 1/2 p (6913) |
|
3-Way Valve 180° |
|||
| 3/8" p x 3/8" p x 3/8" p (6902) | 1/2" p x 1/2" p x 1/2" p (6914) | 1/2" p x 1/2" p x 1/2" mbsp (6915) | 1/2" fbsp x 1/2" mbsp x 1/2" mbsp (6916 and 6917) |
|
Angle Valve |
|||
| 3/8" p x 3/8" p (6883) | 1/2" p x 1/2" p (6885) | 1/2" p x F Nut (6888) | 1/2" p x 3/8" compression (6893) |
|
Drain Angle Valve |
|||
| 3/8" p x 3/8" p (6882) | 1/2" p x 1/2" p (6884) | ||
|
Straight Stop Valve |
|||
| 3/8" p x 3/8" p (6879) | 1/2" p x 1/2" p (6880) | 1/2" p x F Nut (6881) | 1/2" p x 1/2" mpt (6889) |
| 1/2" p x 3/8" compression (6892) | |||
# Accepted by NSF for use in residential and commercial construction, including
manufactured housing.
* These products are also represented by the trade name: THC.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Three Way Valve˘ +++ [G] |
MLTPL |
Flair-It Insert** |
ASME A112.18.1/CSA B125.1 |
| 1/2" (28910) | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
** These products are also represented by the trade names: THC and ECOPOLY.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
[1] Certified THC Flair-Pex tubing is white in color.
| Uponor | |
| 5925 148th Street West | |
| Apple Valley, MN 55124 | |
| United States | |
| 800-321-4739 | |
| 952-891-2000 |
Facility : Brecia, Italy
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 1/2" MIP (LF4795050) | |||
|
ProPEX LF Brass Ball Valve Large Bore |
|||
| 1/2" PEX x 1/2" Copper Adapter (LF4805050) | 1/2" PEX x 1/2" PEX (LF4815050) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
Compression Angle Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4410500) | |||
|
Compression Straight Stop Valve (LF) Brass |
|||
| 1/2" PEX (LF4220500) | |||
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX Full Port (LF Brass) Angle Stop Valve |
|||
| 1/2" PEX (LF4855038) | |||
|
ProPEX Full Port (LF Brass) Straight Stop Valve |
|||
| 1/2" PEX (LF4865038) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
LF Brass Ball Valve |
|||
| 1/2" PEX x 1/4" Compression (LF4838811) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves˘ § +++ [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve |
|||
| 1/2" PEX x 3/4" NH (LF4885075) | 1/2" PEX x 3/4" NH (LF4895075) | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves+ ˘ § [G] |
Brass |
Uponor Logo (U/W) |
ASME A112.18.1/CSA B125.1 |
|
ProPEX LF Brass Ball Valve (Large Bore) |
|||
| 3/8" PEX x 1/2" Copper Adapter (LF4803850) | |||
|
ProPEX LF Brass Inline Ice Maker Tee |
|||
| 1/2" PEX x 1/2" PEX x 1/4" O.D. (LF4455050) | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
| Zurn PEX, Inc. | |
| Highway 11 East | |
| Commerce, TX 75428 | |
| United States | |
| 903-886-2580 | |
| Visit this company's website |
Facility : Harborcreek, PA
Potable Water - Pipe and Fittings
| Product Type | Material Type | Trade Name | Product Standard |
Misc. Proc. Devices/Comp.& +++ [G] |
MLTPL |
Qicksert QPPBV2X |
ASME A112.18.1/CSA B125.1 |
| 1/2" Barb x 1/2" Swivel QickPort Manifold Valve | |||
& Certified as a component of a manifold with a maximum of 21 valves per liter for hot
applications and a maximum of 27 valves per liter for cold applications.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Misc. Proc. Devices/Comp.& +++ [G] |
MLTPL |
Qicksert QPPBV3X |
ASME A112.18.1/CSA B125.1 |
| 1/2" Barb x 1/2" Swivel QickPort Manifold Valve | |||
& Certified as a component of a manifold with a maximum of 21 valves per liter for hot
applications and a maximum of 27 valves per liter for cold applications.
+++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Commercial Hot (180° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Supply Stops+ |
MLTPL |
Qicksert QPV3500 |
ASME A112.18.1/CSA B125.1 |
| Quarter Turn 1/2" MPT x MPT Ball Valve | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. |
|||
Supply Stops+ |
MLTPL |
Qiksert QQPBV22X |
ASME A112.18.1/CSA B125.1 |
| Quarter Turn 3/8" Barb x 3/8" Barb Ball Valve | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. |
|||
Supply Stops+ |
MLTPL |
Qicksert QQPBV33X |
ASME A112.18.1/CSA B125.1 |
| Quarter Turn 1/2" Barb x 1/2" Barb Ball Valve | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. |
|||
Supply Stops+ |
MLTPL |
Qicksert QPV3750 |
ASME A112.18.1/CSA B125.1 |
| Quarter Turn 3/4" MPT x 3/4" MPT Ball Valve | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. |
|||
Supply Stops+ |
MLTPL |
Qicksert QQPV471X |
ASME A112.18.1/CSA B125.1 |
| Quarter Turn 1/2" Barb x 1/2" MPT Ball Valve | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. |
|||
Supply Stops+ |
MLTPL |
Qiksert QQTPV60X |
ASME A112.18.1/CSA B125.1 |
| Quarter Turn 1/2" Barb x 3/8" OD Comp. Angle Stop Valve | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. |
|||
Supply Stops+ |
MLTPL |
Qiksert QQTPV60SX |
ASME A112.18.1/CSA B125.1 |
| Quarter Turn 1/2" Barb x 3/8" OD Comp. Straight Stop Valve | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. |
|||
MP
Mechanical Plumbing Products
Mechanical Plumbing Products
| AllPoints Foodservice Parts & Supplies | |
| 607 West Dempster Street | |
| Mt. Prospect, IL 60056 | |
| United States | |
| 800-332-2500 | |
| 847-966-9700 | |
| Visit this company's website |
Facility : Lakewood, NJ
| Product Type | Material Type | Trade Name | Product Standard |
Faucets+ ˘ § [G] |
MLTPL |
Jet Force |
ASME A112.18.1/CSA B125.1 |
| 56-1551 Faucet, Wall Mount, 8" Adjustable Center with 8" Spout | 56-1548 Faucet, Wall Mount, 8" Adjustable Center with 14" Spout | 56-1539 Faucet, Wok, 10" Spout, 18" Overall Projection | 56-1544 Faucet, Wall Mount, 8" Adjustable Center with 6" Spout |
| 56-1553 Faucet, Wall Mount, 8" Adjustable Center with 16" Spout | 56-1545 Faucet, Wall Mount, 8" Adjustable Center with 12" Spout | 56-1555 Faucet, Wall Mount, 8" Adjustable Center with 10" Spout | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Glass Fillers+ ˘ § [G] |
MLTPL |
Jet Force |
ASME A112.18.1/CSA B125.1 |
| 56-1077 Deck Mount Glass Filler | 56-1079 Wall Mount Glass Filler | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
| AMFAG S.p.A. |  |
| Via G. Falcone, 3 | |
| 46040 Casaloldo (MN) | |
| Italy | |
| 39 037 673 661 | |
| Visit this company's website |
Facility : Casaloldo (MN), Italy
| Product Type | Material Type | Trade Name | Product Standard |
Aerators |
MLTPL |
Amfag |
ASME A112.18.1/CSA B125.1 |
| AABBBCCDDDEEEE[1] [7] | |||
[1] Aerators are designated according to the following numbering scheme:
AA - Body size (16,18,22,24,28,2C,2H,4C,4H,4I,4V, or 8I)
BBB - Type of cartridge (168,365,605,FR0,FR2,FRE,HFA,HFB,HFC,HFD,HFE,
HFS,M15,NRO,O15,ON1,ON2,ON4,ON5,ON6,ON7,ON8,ON9,ONA,ONB,ONL,ONC,ONF,
ONS,OW2,OWA,OWB,OWC,OWL,OWS,SRB,SRC,or SRO)
CC - Type of gasket (00,05,10,15,20,25,30,35,40,55,60,65, or 70)
DDD - Color (any three alpha numberic characters)
EEEE - Personalization (any four alpha numeric characters)
[7] All Listed products from this facility are NSF Certified, whether or not they bear the
NSF Mark.
|
|||
| Blanco America Inc. | |
| 110 Mount Holly Bypass | |
| Lumberton, NJ 08048 | |
| United States | |
| 609-668-6200 |
Facility : Serravalle Sesia (VC), Italy
| Product Type | Material Type | Trade Name | Product Standard |
Faucets* + ˘ § |
MLTPL |
Blanco America Inc. |
ASME A112.18.1/CSA B125.1 |
|
One Way Tap Cold Water |
|||
| ART.157-051 | ART.440687 | ART.440688 | |
|
One Way Wall Sink Tap for Cold Water |
|||
| ART.441194 | ART.441195 | ||
|
Single Lever Mixer with Swivel Spout |
|||
| ART.157-066 | ART.157-067 | ART.440663 | ART.440664 |
| ART.440665 | ART.440666 | ||
|
Single Lever Sink Mixer with Pull-Out Shower |
|||
| ART. 441489 | ART. 441491 | ART. 441514 | ART. 441515 |
| ART. 441516 | ART. 441517 | ART.157-093 | ART.157-098 |
| ART.157-099 | ART.157-140 | ART.440519 | ART.440520 |
| ART.440521 | ART.440522 | ART.440523 | ART.440524 |
| ART.440557 | ART.440558 | ART.440594 | ART.440595 |
| ART.440596 | ART.440597 | ART.440608 | ART.440609 |
| ART.441196 | ART.441197 | ART.441198 | ART.441199 |
| ART.441207 | ART.441208 | ART.441209 | ART.441210 |
| ART.441327 | ART.441328 | ART.441331 | ART.441332 |
| ART.441335 | ART.441401 | ART.441402 | ART.441403 |
| ART.441404 | ART.441405 | ART.441407 | ART.441408 |
| ART.441409 | ART.441410 | ART.441411 | ART.441412 |
| ART.441414 | ART.441415 | ART.441416 | ART.441417 |
| ART.441418 | ART.441419 | ART.441420 | ART.441421 |
| ART.441422 | ART.441423 | ART.441424 | ART.441430 |
| ART.441431 | ART.441484 | ART.441485 | ART.441486 |
| ART.441487 | ART.441488 | ART.441490 | ART.441492 |
| ART.441493 | |||
|
Sink Mixer with Pull-Out Hand Shower |
|||
| ART.157-185 | ART.440516 | ART.440517 | ART.440518 |
| ART.441325 | ART.441326 | ||
|
Sink Mixer without Side Spray |
|||
| ART.157-095 | ART.157-097 | ART.440598 | ART.440599 |
| ART.440600 | ART.440604 | ART.440605 | ART.441203 |
| ART.441205 | ART.441329 | ||
|
Two Hole Sink Mixer with Side Spray |
|||
| ART.157-094 | ART.157-096 | ART.440601 | ART.440602 |
| ART.440603 | ART.440606 | ART.440607 | ART.441204 |
| ART.441206 | ART.441330 | ||
|
Two Hole Sink Mixer with Two Swivel Spout |
|||
| ART.157-084 | ART.440630 | ART.440631 | |
* ANT - Anthracite CB - Café brown CR-ANTH - Chrome-anthracite CR - Chrome ST - Stainless + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
| Blanco Canada Inc. | |
| 37 Jutland Road | |
| Toronto, ON M8Z 2G6 | |
| Canada | |
| 905-612-0554 |
Facility : Serravalle Sesia (VC), Italy
| Product Type | Material Type | Trade Name | Product Standard |
Faucets+ ˘ § |
MLTPL |
Blanco Canada Inc. |
ASME A112.18.1/CSA B125.1 |
|
One Way Wall Sink Tap for Cold Water |
|||
| ART.400525 | ART.400526 | ||
|
Single Lever Mixer with Swivel Spout |
|||
| ART.400485 | ART.400486 | ART.400487 | ART.400488 |
| ART.400503 | ART.400517 | ART.400544 | ART.400545 |
| ART.400567 | ART.400568 | ART.400569 | ART.400570 |
| ART.400571 | ART.400572 | ART.401214 | ART.401217 |
|
Single Lever Sink Mixer with Pull-Out Shower |
|||
| ART. 401450 | ART. 401451 | ART. 401452 | ART. 401453 |
| ART. 401454 | ART. 401455 | ART. 401456 | ART. 401457 |
| ART.400518 | ART.400519 | ART.400546 | ART.400547 |
| ART.400548 | ART.400549 | ART.400565 | ART.400566 |
| ART.401081 | ART.401084 | ART.401085 | ART.401086 |
| ART.401090 | ART.401091 | ART.401218 | ART.401219 |
| ART.401220 | ART.401221 | ART.401222 | ART.401315 |
| ART.401316 | ART.401317 | ART.401318 | ART.401319 |
| ART.401320 | ART.401321 | ART.401322 | ART.401323 |
| ART.401324 | |||
|
Single Lever Sink Mixer with Side Spray |
|||
| ART.401236 | ART.401237 | ||
|
Single Lever Sink Mixer with Swivel Spout |
|||
| ART.400535 | ART.400536 | ||
|
Sink Mixer with Pull-Out Hand Shower |
|||
| ART.400558 | ART.400559 | ART.400560 | ART.400561 |
| ART.400562 | ART.400563 | ART.400564 | ART.401092 |
| ART.401238 | ART.401239 | ART.401240 | ART.401241 |
|
Sink Mixer with Pull-Out Shower |
|||
| ART. 401464 | ART. 401465 | ART.401087 | ART.401088 |
| ART.401089 | ART.401223 | ART.401224 | ART.401227 |
| ART.401228 | ART.401229 | ART.401230 | |
|
Sink Mixer with Swivel Spout |
|||
| ART.400550 | ART.400551 | ||
|
Two Hole Sink Mixer with Side Spray |
|||
| ART.400540 | ART.400541 | ||
|
Two Hole Sink Mixer with Two Swivel Spout |
|||
| ART.400522 | ART.400523 | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
NOTE: Only products bearing the NSF Mark are Certified.
| Component Hardware Group, Inc. | |
| 1890 Swarthmore Avenue | |
| P.O. Box 2020 | |
| Lakewood, NJ 08701 | |
| United States | |
| 800-526-3694 | |
| 732-363-4700 | |
| Visit this company's website |
Facility : Lakewood, NJ
| Product Type | Material Type | Trade Name | Product Standard |
Bed Pan Washers˘ § |
MLTPL |
Encore |
ASME A112.18.1/CSA B125.1 |
| K79-4100-VB | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Faucets+ ˘ § |
MLTPL |
Encore Series |
ASME A112.18.1/CSA B125.1 |
| KL41-4XXX-YYY[2] | |||
|
KL41-8XXX-YYY[2] |
|||
|
KL45-4XXX-YYY[2] |
|||
|
KL45-8XXX-YYY[2] |
|||
|
KL454XXXYYYGT[2] |
|||
|
KL454XXXYYYP[2] |
|||
|
KL51 Encore Series Double Pantry[G] |
|||
|
KL54 Encore Series Wall Mount[G] |
|||
|
KL55-7XXX-YYY[1] [G] |
|||
|
KL57 Encore Series 4" Deck Mount[G] |
|||
|
KL61 Encore Series 8" Deck Mount[G] |
|||
|
KL64 Encore Series Single Pantry[G] |
|||
|
KL67 Encore Series 6" Deck Mount[G] |
|||
|
KL70 Encore Series Single Wall Mount[G] |
|||
|
KL72 Encore Series Wall Mount Spout Base[G] |
|||
|
KL74 Encore Series Deck Mount Spout Base[G] |
|||
|
KL76 Encore Series Wok Range Single Wall Mount[G] |
|||
|
KL83-Nx1x2x3-y1y2y3[G] |
|||
|
KL84-NXXX-YYY[G] |
|||
|
KL85-Nx1x2x3-y1y2y3[G] |
|||
|
KL86-NXXX-YYY[G] |
|||
|
KN41-4XXX-YYYY Encore Deck Mt Fau 4" Center w/ Spt# $ |
|||
|
KN41-8XXX-YYYY Encore Deck Mt Fau 8" Center w/ Spt# $ |
|||
|
KN45-4XXX-YYYY Encore Deck Mt Fau 4" Center w/ Spt# $ |
|||
|
KN45-8XXX-YYYY Encore Deck Mt Fau 8" Center w/ Spt# $ |
|||
|
KN51 Encore Series# * |
|||
|
KN54 Encore Series# * |
|||
|
KN55 Encore Series# * |
|||
|
KN57 Encore Series# * |
|||
|
KN61 Encore Series# * |
|||
|
KN64 Encore Series# * |
|||
|
KN67 Encore Series# * |
|||
|
KN70 Encore Series# * |
|||
|
KN70 Single Wall Mount with KPV-X001 Pot Filler# * |
|||
|
KN72 Encore Series# * |
|||
|
KN74 Encore Series# * |
|||
|
KN76 Encore Series# * |
|||
|
KN76 Single Wall/Wok Range w/ KPV-X001 Pot Filler# * |
|||
|
KN81-4405-CE2 |
|||
| KN81-4405-CE2 5" Single Lever Faucet | |||
| KN81-9005-CE2 5" Single Lever Faucet | |||
| KN83 Encore Series# * | |||
|
KN84 Encore Series# * |
|||
|
KN85 Encore Series# * |
|||
|
KN86 Encore Series# * |
|||
|
KPL83-Nx1x2x3-y1y2y3[G] |
|||
|
KPL86-NXXX-YYY[G] |
|||
|
KPV-X001 Pot Filler# * |
|||
[2] Where X1X2X3-Y1Y2Y3 is as follows:
X1 - Valve type
X2X3 - Spout offset to 18"
Y1 - Spout style
Y2 - Aerator
Y3 - Handle
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
[1] ADD-ON Faucets w/ Spout follow the format KL55-70XX
XX - 06, 08, 10, 12, 14, 16, or 18
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
# Does not include 6.0GPM aerator. $ XXX represents different spout lengths up to 18". YYYY represents optional mounting kits, handles, or aerators. # Does not include 6.0GPM aerator. * Includes spouts up to 18" in length. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Glass Fillers+ ˘ § [G] |
MLTPL |
CHG |
ASME A112.18.1/CSA B125.1 |
| KL26-0010 Glass Filler Repair Kit | |||
| KL26-5000 | |||
| KL26-5000-SP2 | |||
| KL26-5001 | |||
| KL26-5012 | |||
| KL26-5012-SP | |||
| KL26-5014 | |||
| KL26-5015-SP | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
Valves[G] |
MLTPL |
CHG |
ASME A112.18.1/CSA B125.1 |
| KL24-1100 Short Pedal Valve Assembly | |||
| KL24-1200 Pedal Valve Assembly, Shelf Mount | |||
| KL24-1302 Extended Pedal Valve Wall Mount w/ Stops | |||
| KL24-Y002 Stop Valve, Cold | |||
| KL24-Y003 Stop Valve, Hot | |||
| KL25-1000 Dual Pedal Foot Control Valve Assembly | |||
| KL25-2000 Single Pedal Foot Control Valve Assembly | |||
| KL25-3000 Dual Pedal Knee Control Valve Assembly | |||
| KL25-4000 Single Pedal Knee Control Valve Assembly | |||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
| Dyson Ltd. | |
| Tetbury Hill | |
| Malmesbury SN16 0RP | |
| United Kingdom | |
| 44 166 682 7200 | |
| Visit this company's website |
Facility : # 1 Malaysia
| Product Type | Material Type | Trade Name | Product Standard |
Faucets˘ § [1] [2] |
MLTPL |
Dyson |
ASME A112.18.1/CSA B125.1 |
| AB09 | |||
| AB10 | |||
| AB11 | |||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Products are in compliance with applicable sections of ICC/ANSI A117.1-2003 Accessible
and Usable Buildings and Facilities. Installation is per manufacturer's instructions
and ICC/ANSI A117.1.
[2] Products are in compliance with applicable sections of CSA B651-12 Accessible Design for
the Built Environment. Installation is per manufacturer's instructions and CSA B651-12.
|
|||
| Horus S.A. | |
| 20, Rue Du General Leclerc | |
| BP 6-67211 Obernai | |
| France | |
| 33 3 88494400 |
Facility : Obernai, France
| Product Type | Material Type | Trade Name | Product Standard |
Faucets§ |
MLTPL |
Horus |
ASME A112.18.1/CSA B125.1 |
|
Faucets |
|||
| 10001.260+ | 10001.434 | 10001.435 | 10001.464 |
| 10002.260+ | 10006.260+ | 10006.434 | 10006.435 |
| 10006.464 | 10007.260+ | 10007.434 | 10007.435 |
| 10007.464 | 10010.260+ | 10010.434 | 10010.435 |
| 10010.464 | 10019.260+ | 10019.464 | 10020.260+ |
| 10020.464 | 10021.260+ | 10032.260+ | 10050.260+ |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Plumbing Fixture Fittings |
MLTPL |
Horus |
ASME A112.18.1/CSA B125.1 |
|
Bidet§ |
|||
| 100.01.311 | 100.06.311 | 100.07.311 | 100.20.311 |
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Kason Industries Inc. | |
| 31 Amlajack Boulevard | |
| Shenandoah, GA 30265 | |
| United States | |
| 770-251-1422 | |
| Visit this company's website |
Facility : Shengkang Changhua, Taiwan
| Product Type | Material Type | Trade Name | Product Standard |
Faucets+ ^ § |
MLTPL |
KASON |
ASME A112.18.1/CSA B125.1 |
|
Commercial Faucets |
|||
| 0451KL80XX 8-inch Heavy Duty Wall Mount Faucet* [G] | 0451KL8500 8-inch Deck Mount Pre-Rinse Unit[G] | 0451KN80XX 8-inch Heavy Duty Wall Mount Faucet* | 0451KN8500 8-inch Wall Mount Pre-Rinse Unit |
| 0452KL10XX 4-inch Heavy Duty Double Pantry Faucet* [G] | 0452KL1500 4-inch Deck Mount Pre-Rinse Unit[G] | 0452KL20XX Single Deck Mount Pantry Faucet* [G] | 0452KL2500 Single Deck Mount Pre-Rinse Unit[G] |
| 0452KL40XX 4-inch Heavy Duty Deck Mount Faucet* [G] | 0452KL44XX 4-inch Heavy Duty Deck Mount Faucet* [G] | 0452KL4500 4-inch Deck Mount Pre-Rinse Unit[G] | 0452KL50XX Add on Faucet* [G] |
| 0452KL80XX 8-inch Heavy Duty Deck Mount Faucet* [G] | 0452KL8500 8-inch Deck Mount Pre-Rinse Unit[G] | ||
* The suffix XX denotes one of the following:
06 - 6" Spout
08 - 8" Spout
10 - 10" Spout
12 - 12" Spout
14 - 14" Spout
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ^ Any of these trade names may have the prefix 1 or 6, which denotes the selling division. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Linx, Limited | |
| 875 Aquidneck Avenue | |
| Middletown, RI 02842 | |
| United States | |
| 401-841-0600 |
Facility : # 3 Zhejiang Province, China
| Product Type | Material Type | Trade Name | Product Standard |
Supply Stops˘ § ++ [G] |
Brass C69300 |
UniGrip Supply Stops |
ASME A112.18.1/CSA B125.1 |
| E9601-0503 1/2" UG x 1/4" Comp (straight) | E9601-0504 1/2" UG x 3/8" Comp (straight) | E9601-0505 1/2" UG x 1/2" Comp (straight) | E9601-0506 1/2" UG x 5/8" Comp (straight) |
| E9801-0505 1/2" UG x 1/2" MNPT (straight) | E9602-0503 1/2" x 1/4" Comp (angle) | E9602-0504 1/2" x 3/8" Comp (angle) | E9602-0505 1/2" x 1/2" Comp (angle) |
| E9602-0506 1/2" x 5/8" Comp (angle) | E9702-0505 1/2" x 1/2" UG (angle) | E9802-0505 1/2" UG x 1/2" MNPT (angle) | E9701-0505 1/2" x 1/2" UG (straight) |
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
++ Material complies with NSF/ANSI 61 health effects requirements when tested at
temperatures up to and including Domestic Hot (140° F).
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
| Mueller Industries, Inc. | |
| 2600 Elmhurst Road | |
| Elk Grove Village, IL 60007-6312 | |
| United States | |
| 847-773-8585 |
Facility : Taizhou City, Zhejiang Province, China
| Product Type | Material Type | Trade Name | Product Standard |
Boiler Drain* ˘ § |
MLTPL |
Mueller Industries, Inc. |
ASME A112.18.1/CSA B125.1 |
| 102-003 Light MIP 1/2" | 102-004 Light MIP 3/4" | 102-033 Compression Connection 1/2" (5/8" O.D.) | 102-043 Boiler Drain MIP 1/2" Slanting |
| 102-044 Boiler Drain MIP 3/4" Slanting | 102-053 Quarter Turn 1/2" | 102-054 Quarter Turn 3/4" | 102-103 Light FIP 1/2" |
| 102-104 Light FIP 3/4" | 102-703 Heavy MIP 1/2" | 102-704 Heavy MIP 3/4" | 102-803 Heavy FIP 1/2" |
| 102-804 Heavy FIP 3/4" | 102-903 Male with Locknut 1/2" | ||
* The suffix "HC" refers to different packaging and is not related to wetted components. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Garden Valve* + ˘ § |
MLTPL |
Mueller Industries, Inc. |
ASME A112.18.1/CSA B125.1 |
| 108-103 Bent Nose Brass 1/2" | 108-104 Bent Nose Brass 3/4" | 108-105 Bent Nose Brass 1" | 108-124 Inverted 3/4" |
| 108-133 Bent Nose-Loose Key 1/2" | 108-134 Bent Nose-Loose Key 3/4" | 108-135 Bent Nose-Loose Key 1" | |
* The suffix "HC" refers to different packaging and is not related to wetted components. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Hose Bibb* + ˘ § |
MLTPL |
Mueller Industries, Inc. |
ASME A112.18.1/CSA B125.1 |
| 102-303 No Kink Brass Hose Bibb MIP 1/2" | 102-304 No Kink Brass Hose Bibb MIP 3/4" | 102-333 Nose-Loose Key Hose Bibb No Kink MIP 1/2" | 102-334 Nose-Loose Key Hose Bibb No Kink MIP 3/4" |
| 102-353 Quarter Turn Hose Bibb No Kink MIP 1/2" | 102-354 Quarter Turn Hose Bibb No Kink MIP 3/4" | 102-363 No Kink Brass Hose Bibb Compression 1/2" | 102-403 No Kink Brass Hose Bibb FIP 1/2" |
| 102-404 No Kink Brass Hose Bibb FIP 3/4" | 102-433 Nose-Loose Key Hose Bibb No Kink FIP 1/2" | 102-434 Nose-Loose Key Hose Bibb No Kink FIP 3/4" | 102-453 Quarter Turn Hose Bibb FIP 1/2" |
| 102-454 Quarter Turn Hose Bibb FIP 3/4" | 102-534 No Kink Brass Hose Bibb CUP 1/2" and 3/4" | 103-003 Brass Hose Bibb MIP 1/2" | 103-004 Brass Hose Bibb MIP 3/4" |
| 103-013 Heavy Hose Bibb MIP 1/2" | 103-014 Heavy Hose Bibb MIP 3/4" | 103-023 Ball Valve Type Hose Bibb MIP 1/2" | 103-024 Ball Valve Type Hose Bibb MIP 3/4" |
| 103-053 Quarter Turn Brass 1/2" | 103-054 Quarter Turn Brass 3/4" | ||
* The suffix "HC" refers to different packaging and is not related to wetted components. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Sillcock* + ˘ § |
MLTPL |
Mueller Industries, Inc. |
ASME A112.18.1/CSA B125.1 |
| 108-003 FIP Brass Sillcock 1/2" | 108-004 FIP Brass Sillcock 3/4" | 108-013 Heavy Brass Sillcock 1/2" | 108-014 Heavy Brass Sillcock 3/4" |
| 108-033 Nose-Loose Key Brass Sillcock FIP 1/2" | 108-034 Nose-Loose Key Brass Sillcock FIP 3/4" | 108-053 Quarter Turn Sillcock 1/2" | 108-054 Quarter Turn Sillcock 3/4" |
| 108-503 Solder Brass Sillcock 1/2" and 3/4" | 108-513 Heavy Sillcock Solder 1/2" and 3/4" | 108-533 Nose-Loose Key Brass Sillcock SOL 1/2" & 3/4" | 108-553 Solder Quarter Turn Sillcock 1/2" and 3/4" |
* The suffix "HC" refers to different packaging and is not related to wetted components. + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Newform S.P.A. | |
| Via Marconi, 25/A | |
| 13037 Serravalle Sesia (VC) | |
| Frazione Vintebbio | |
| Italy | |
| 39 01 63 45 20 11 |
Facility : Vintebbio, Italy
| Product Type | Material Type | Trade Name | Product Standard |
Faucets˘ § [1] |
MLTPL |
Newform S.p.A. |
ASME A112.18.1/CSA B125.1 |
|
Basin Mixer with Swivel Outlet+ |
|||
| ART.2210 | ART.2213 | ||
|
Basin Mixer with Swivel Spout+ |
|||
| ART.60410 | ART.60413 | ||
|
Five Hole Bath Mixer |
|||
| ART.62682C | ART.62782C | ||
|
Four Hole Bath Mixer |
|||
| ART.2282C | ART.60682C | ART.62082C | ART.62582C |
| ART.64082C | |||
|
Monobloc Basin Group+ |
|||
| ART.62620 | ART.62720 | ||
|
One Way Tap Cold Water+ |
|||
| ART.2262 | ART.2268 | ||
|
One Way Wall Sink Tap for Cold Water+ |
|||
| ART.2467 | |||
|
Single Lever Basin Mixer+ |
|||
| ART.60610 | ART.60613 | ART.62010 | ART.62013 |
| ART.62510 | ART.63310 | ART.63313 | ART.64010 |
| ART.64011 | ART.64014 | ART.65210YNK | ART.65213YNK |
| ART.65810 | ART.65812 | ART.65813 | ART.65815 |
|
Single Lever Mixer with Swivel Spout+ |
|||
| ART.2402 | ART.2403 | ART.2406 | ART.2414 |
|
Single Lever Sink Mixer with Pull-Out Shower+ |
|||
| ART.2314 | ART.2315 | ART.2324 | ART.2325 |
| ART.2412 | ART.2413 | ART.2427 | ART.2431 |
| ART.2454 | ART.2458 | ART.2459 | ART.3110 |
| ART.3143 | ART.3144 | ART.4422 | ART.4425 |
| ART.4428 | ART.4429 | ART.4494 | ART.4495 |
| ART.60512 | ART.60527 | ART.61537 | ART.63930 |
| ART.64203 | ART.64214 | ||
|
Single Lever Sink Mixer with Side Spray+ |
|||
| ART.65045 | |||
|
Single Lever Sink Mixer with Swivel Spout+ |
|||
| ART.4473 | |||
|
Sink Mixer with Pull-Out Hand Shower+ |
|||
| ART.60528 | ART.61526 | ART.61536 | ART.65610 |
|
Sink Mixer with Pull-Out Shower+ |
|||
| ART.4345 | ART.4346 | ART.61615 | ART.61616 |
| ART.64215 | |||
|
Sink Mixer with Swivel Spout+ |
|||
| ART.3128 | ART.4320 | ART.4325 | |
|
Sink Mixer without Side Spray+ |
|||
| ART.3132 | ART.3133 | ||
|
Sngl. Lever Sink Mxr w/Swing Spout&Pull-Out Shower+ |
|||
| ART.2415 | ART.2451 | ART.2452 | ART.2453 |
|
Thermostatic Mixer |
|||
| ART.2269 | ART.4968 | ART.60468 | ART.60668 |
| ART.62068 | ART.62568 | ART.64068 | ART.65768 |
|
Thermostatic Shower Mixer |
|||
| ART.2266 | ART.4966 | ART.60466 | ART.60666 |
| ART.62066 | ART.62566 | ART.64066 | ART.65764 |
|
Two Hole Sink Mixer with Side Spray+ |
|||
| ART.3134 | ART.3139 | ART.4478 | |
|
Two Hole Sink Mixer with Two Swivel Spout+ |
|||
| ART.3156 | ART.60557 | ||
|
Volume Control |
|||
| ART.2267 | ART.4967 | ART.60467 | ART.60667 |
| ART.62067 | ART.62567 | ART.64067 | ART.65767 |
|
Wall Mounted Basin Mixer+ |
|||
| ART.2230 | ART.2231 | ART.2235 | ART.2236 |
| ART.60430 | ART.60431 | ART.60630 | ART.60631 |
| ART.60635 | ART.60636 | ART.62030 | ART.62031 |
| ART.62035 | ART.62036 | ||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Authorized finishes are the following:
.01.093 - Black
.02.013 - White/chrome
.05.007 - Chrome/black insert
.05.013 - Chrome/white insert
.05.092 - Chrome/red insert
.02.093 - Black/chrome
.05.093 - Chrome/black
.07.407 - Anthracite
.07.418 - Biscotti
.07.419 - Café
.07.422 - Stone biscuit
.07.423 - Anthracite
.07.426 - Chrome/truffle
.07.428 - Rock grey
.08.401 - White/chrome
.08.407 - Anthracite/chrome
.08.409 - Cognac/chrome
.08.418 - Biscotti/chrome
.08.419 - Café/chrome
.08.420 - Silk grey/chrome
.08.422 - Stone biscuit/chrome
.08.423 - Antracite/chrome
.08.424 - White/chrome
.08.426 - Truffle
.09.407 - Chrome - anthracite
.09.418 - Biscotti mix
.09.419 - Café mix
.09.423 - Chrome/antracite
.09.424 - Silgranit white/chrome
.09.426 - Truffle/chrome
.09.428 - Rock grey/chrome
.21.018 - Chrome
.25.080 - Tattoo classic
.25.082 - Tattoo round
.31.028 - Brushed nickel
.31.029 - Stainless steel
.91.106 - Mat chrome
.92.106 - Mat chrome - chrome
|
|||
NOTE: Only products bearing the NSF Mark are Certified.
| Noken Design S.A. | |
| Puebla de Arenoso Cv 20 Km 2 | |
| P.O. Box 372 | |
| Villarreal (Castellon) 12540 | |
| Spain | |
| 34 964506450 |
Facility : # 1 Italy
| Product Type | Material Type | Trade Name | Product Standard |
Faucets˘ § [G] |
MLTPL |
Newform S.p.A. |
ASME A112.18.1/CSA B125.1 |
|
Single Lever Basin Mixer+ |
|||
| 100121840 | 100121841 | 100121842 | 100121843 |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
NOTE: Only products bearing the NSF Mark are Certified.
| RinseWorks, Inc | |
| 1700 Northwest 15th Avenue | |
| Suite 330 | |
| Pompano Beach, FL 33069 | |
| United States | |
| 800-536-0858 | |
| 954-946-0070 | |
| Visit this company's website |
Facility : Pompano Beach, FL
| Product Type | Material Type | Trade Name | Product Standard |
Bidet Sprayer |
MLTPL |
Aquaus |
ASME A112.18.1/CSA B125.1 |
| The Bum Genius Diaper Sprayer | |||
| Aquaus Diaper Sprayer ADST800 | |||
Toilet Adapter |
MLTPL |
Aquaus |
ASME A112.18.1/CSA B125.1 |
| INDI106-INDI107 | |||
Bidet Sprayer |
MLTPL |
Aquaus |
ASME A112.18.1/CSA B125.1 |
| Aquaus Handheld Bidet ABT700 | |||
Hose |
MLTPL |
Aquaus |
ASME A112.18.1/CSA B125.1 |
| SHOOICR | |||
| Rubinetterie 3M SRL | |
| Via Mattei, 10 | |
| 53041 Asciano (Siena) | |
| Italy | |
| 39 0 577 718 293 | |
| Visit this company's website |
Facility : Asciano (Siena), Italy
| Product Type | Material Type | Trade Name | Product Standard |
Faucet+ ˘ § [1] |
MLTPL |
Rubinetterie 3M |
ASME A112.18.1/CSA B125.1 |
| AA36-10-HG-BF-ZZ | |||
| AA71-11-HG-CP-ZZ | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[1] Collection name:
AA36 - Blok
AA71 - Cleo
Faucet type:
10 - Single lever wash basin mixer
11 - Wash basin mixer without pop-up waste hole
Finish:
CC - Chrome/chrome finishing
HG - Finish shall be either:
JJ - Brush nickel/brush nickel
Lever/handle style:
BF - Blok
CP - Cleo
Production type:
ZZ - Standard
|
|||
| Rubinetterie Ritmonio SRL | |
| Via Indren, 4 | |
| Zona Industriale Roccapietra | |
| 13019 Varallo | |
| Italy | |
| 39 0163 560000 | |
| Visit this company's website |
Facility : Varallo, Italy
| Product Type | Material Type | Trade Name | Product Standard |
Faucets+ ˘ § |
MLTPL |
Rubinetterie Ritmonio SRL |
ASME A112.18.1/CSA B125.1 |
|
Built-in Group for Basin Waterblade |
|||
| HBUS1013CRL | HBUS1013H1CRL | ||
|
Built-in Single Lever Basin Diametrotrentacinque |
|||
| EBUS0113S/P-SX/DXCRL | EBUS0113SX/DXCRL | EBUS0114S/P-SX/DXCRL | EBUS0114SX/DXCRL |
|
Single Lever Basin Mixer Diametrotrentacinque |
|||
| ECUS00CRL | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Samuel Heath & Sons Plc. | |
| Leopold Street | |
| Birmingham, West Midlands B12 0UJ | |
| United Kingdom | |
| 44 121 772 2303 | |
| Visit this company's website |
Facility : Birmingham, United Kingdom
| Product Type | Material Type | Trade Name | Product Standard |
Faucets# ˘ § |
MLTPL |
Samuel Heath |
ASME A112.18.1/CSA B125.1 |
| V114/ALL Xenon 3 Hole Lavatory Faucet with Low Spout | V116/ALL Xenon 3 Hole Lavatory Faucet with High Spout | V214/ALL Fairfield Widespread Lavatory Filler with Low Spout | V215/ALL Fairfield Widespread Lavatory Filler with Low Spout |
| V216/ALL Fairfield Widespread Lavatory Filler with High Spout | V316/ALL Xara Widespread Lavatory Filler with High Spout | ||
# Material complies with NSF/ANSI Standard 61 Section 9 health effects requirements. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Faucets# ˘ § |
MLTPL |
Samuel Heath |
ASME A112.18.1/CSA B125.1 |
| V109/ALL XX Xenon Single Lever Mixer with Pop-Up Waste for Lavatory Sinks | V129/ALL XX Xenon Single Lever Mixer without Pop-Up Waste for Lavatory Sinks | V131/ALL XX Xenon Extended Single Lever Mixer w/out Pop-Up Waste - Raised Bowls | V209/ALL XX Single Lever Basin Mixer with Pop-Up Waste |
| V309/ALL Single Lever Basin Mixer C/W Waste | V329-ALL Single Lever Basin Mixer | ||
# Material complies with NSF/ANSI Standard 61 Section 9 health effects requirements. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Faucets# ˘ § |
MLTPL |
Samuel Heath |
ASME A112.18.1/CSA B125.1 |
| V108/ALL Xenon Small Single Lever Basin Mixer | V128/ALL Xenon Small Single Lever Basin Mixer without Pop-Up | V308/ALL Xiara Small Single Lever Basin Mixer | |
# Material complies with NSF/ANSI Standard 61 Section 9 health effects requirements. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Tetard Haudiquez Grisoni | |
| 35 Rue Tourniere BP 212 | |
| Bethencourt Sur Mer 80535 Friville | |
| France | |
| 33 3 22 60 20 84 | |
| Visit this company's website |
Facility : Friville, France
| Product Type | Material Type | Trade Name | Product Standard |
Three Hole Bath Faucet+ ˘ [1] |
MLTPL |
151/LL XXX |
ASME A112.18.1/CSA B125.1 |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
[1] XXX is one of the alpha numeric codes:
G31, G18, A06, A28, G49, G60, G61, G93, G51, G52, G03, A18, A3B, A3C, A3E, A3F, A3G,
G34, G24, G26, A51, G29, A49, G45, G47, G48, A09, A95, A04, A52, A53, A83, U70, U71,
U88, G13, G14, E26, E30, E35, G75, F21, F22, F23, F24, F25, F26, F27, F28, F29, F30,
F05, F06, K32, K33, F11, F12, F13, F04, F08, K29, G11, G08, G74, A54, A55, A56, A57,
A58, A59, A1J, A1K, A1L, A1M, A1S, A1T, A1U, A1V, A1W, A1X, A2C, A2G, A2H, A2K, J10,
A2A, A2B, A2L, A2M, G79, J06, J17, K40, F02, F03, K22, K23, K28, K27, K30, K34, K38,
K39, K31, A23, A3M, A3N, A3P, A3K, A3J, A2N, A2P, A2W, A2X, A2Y, U4A, U4B, U4C, U4D,
U4E, U4F, A9F, G2K, G2L, G2M, G2N, G2J, G2R, G2S, G2T, G2U, G69, G58, A7D, A7E, A7A,
A7B, A7F, A7L, A34,, A7G, A9A, A9C, A9D, A9B, A9F, U1A, U1D, U1E, U1F, U7C, U7B, U7A,
U7E, U7D, U1G, U1H, U1J, U1L, U1M, U1N, U1P, U1Q, U1R, U1S, A6G, A6L, A6H, A6M, A6N,
A6P, A6A, A6B, G1T, G1U, G1V, G1W, A7C, A35, A33, G2P, G04
|
|||
Shower Heads |
MLTPL |
186PR/US |
ASME A112.18.1/CSA B125.1 |
Shower Heads |
MLTPL |
280EP/US |
ASME A112.18.1/CSA B125.1 |
Shower Heads |
MLTPL |
281C/US |
ASME A112.18.1/CSA B125.1 |
Shower Heads |
MLTPL |
281EP/US |
ASME A112.18.1/CSA B125.1 |
Shower Heads |
MLTPL |
281R/US |
ASME A112.18.1/CSA B125.1 |
Shower Heads |
MLTPL |
286/US |
ASME A112.18.1/CSA B125.1 |
Shower Heads |
MLTPL |
286P/US |
ASME A112.18.1/CSA B125.1 |
Shower Heads |
MLTPL |
288L/US |
ASME A112.18.1/CSA B125.1 |
| Vola A/S | |
| Lunavei 2 | |
| Horsens 8700 | |
| Denmark | |
| 45 7023 5500 |
Facility : Horsens, Denmark
| Product Type | Material Type | Trade Name | Product Standard |
Bath Fillers# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 611C-XX | 613CK-XX | 621C-XX | 623CK-XX |
# XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Bidet Faucet# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| HV4-XX% | |||
% Optional prefix: F - Flexible hose Optional suffix: +170 - Special length of body +30 - Special length of body 150 - Special length of spout 215 - Special length of spout L - 100mm lever M - 60mm lever US - Thread size and marking # XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Faucets# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 100 | 100X | 111 | 112 |
| 121 | 122 | 1511-XX | 1513-XX |
| 1521-XX | 1523-XX | 2100-XX | 2111-XX |
| 2111C-XX | 2112-XX | 2112C-XX | 2121-XX |
| 2121C-XX | 2122-XX | 2122C-XX | 2300-XX |
| 2311-XX | 2312-XX | 2321-XX | 2322-XX |
| 300 | 311 | 312 | 321 |
| 322 | 4011 | 4012 | 4021 |
| 4022 | 4111 | 4113 | 4121 |
| 4123 | 590 One Handle Mixer& | 590B One Handle Mixer with Swivel Spout& | 590C One Handle Mixer with Swivel Spout& |
| 590D One Handle Mixer with Swivel Spout& | 590E One Handle Mixer with Swivel Spout& | 590G One Handle Mixer with Swivel Spout& | 590H One Handle Mixer with Swivel Spout& |
| 590V One Handle Mixer with Swivel Spout& | 611-XX | 613-XX | 623-XX |
| 911-XX | 912-XX | 921-XX | 922-XX |
| FS2 Free-standing Wash Basin Mixer | HV1-XX% | HV10 Deck Mounted Three Hole Two Lever Faucet& | HV1E-XX% |
| HV3-XX% | HV5 Deck Mounted Three Hole Two Lever Faucet& | HV8 Deck Mounted Three Hole Two Lever Faucet& | KV1-XX% |
| KV10 Deck Mounted Three Hole Two Lever Faucet& | KV15 Deck Mounted Three Hole Two Lever Faucet& | KV3 Deck Mounted Three Hole Two Lever Faucet& | KV4 Deck Mounted Three Hole Two Lever Faucet& |
| KV8-XX% | KV9 Deck Mounted Three Hole Two Lever Faucet& | RB1-XX% | RB1E-XX% |
| RB3-XX% | |||
% Optional prefix: F - Flexible hose Optional suffix: +170 - Special length of body +30 - Special length of body 150 - Special length of spout 215 - Special length of spout L - 100mm lever M - 60mm lever US - Thread size and marking & Optional prefix: F - Flexible hose Optional suffix: K - Special type of cover plate L - 100mm lever M - 60mm lever US - Thread size and marking $ - Thread size and marking # XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Faucet Spouts# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 010 Spout | 010C Spout | 020 Spout | 020C Spout |
# XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Misc. Faucet# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 1500-XX& | 2400FV-XX[8] | 2400NV-XX[8] | 2400RV-XX[8] |
| 2400TV-XX[8] | 2400V-XX[8] | 400D-XX[8] | 400FV-XX[8] |
| 400NV-XX[8] | 400RV-XX[8] | 400TV-XX[8] | 400V-XX[8] |
| 600-XX | 900-XX | ||
& Optional prefix:
F - Flexible hose
Optional suffix:
K - Special type of cover plate
L - 100mm lever
M - 60mm lever
US - Thread size and marking
$ - Thread size and marking
[8] These models require the use of a listed remote pressure balancing or thermostatic
mixing valve.
# XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Mixing Valves# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 200-XX | 2200-XX | 6400D-(a)-XX! | S20-XX^ |
| S21-XX^ | S40-XX^ | S42-XX^ | |
! Acceptable options for (a): 3 or 4. ^ Optional suffix: L - 100 mm lever M - 60 mm lever US - Thread size and marking $ - Thread size and marking # XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Thermostatic# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 5100-XX | 5100X-XX | 5200V-XX | 5300-XX |
| 5400FV-XX | 5400NV-XX | 5400RV-XX | 5400TV-XX |
| 5400V-XX | 5600V-XX | 6400FV-(a)-XX! | 6400NV-(a)-XX! |
| 6400V-(a)-XX! | 6600V-(a)-XX! | ||
! Acceptable options for (a): 3 or 4. # XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Supply Stops# + ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| S10-XX+ | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. # XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish + Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Shower Fittings# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 050-XX | 050A-XX | 050K-XX | 060-XX |
| 060A-XX | 070-XX | 080-XX | 080D-XX |
| 080K-XX | 080ST-XX | T2- XX | |
# XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Shower˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| FS1 | FS3 | ||
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Valves# ˘ § |
MLTPL |
Vola |
ASME A112.18.1/CSA B125.1 |
| 500 valve | |||
# XX suffix denotes available finishes: 16 - Chrome 19 - Natural brass 20 - Brushed chrome 40 - Stainless steel 99 - Valve only with no finish ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Watts Regulator Company | |
| 815 Chestnut Street | |
| North Andover, MA 01845 | |
| United States | |
| 724-387-3381 |
Facility : Lakewood, NJ
| Product Type | Material Type | Trade Name | Product Standard |
Faucets+ ˘ § |
MLTPL |
Encore Series |
ASME A112.18.1/CSA B125.1 |
| LFF-DSP-S06S[G] | |||
|
LFF-DST4-S12S[G] |
|||
|
LFF-DST8-S12S[G] |
|||
|
LFF-DST8-S08S[G] |
|||
|
LFF-DSP-S12S[G] |
|||
|
LFF-WST8-S14S[G] |
|||
|
LFF-DST4-S08S[G] |
|||
|
LFF-DST8-G09S[G] |
|||
|
LFF-DST8-S12S[G] |
|||
|
LFF-DSP-G06S[G] |
|||
|
LFF-DST8-S10S[G] |
|||
|
LFF-WST8-S10S[G] |
|||
|
LFF-WST8-G06S[G] |
|||
|
LFF-WST8-S08S[G] |
|||
|
LFF-WST8-S12S[G] |
|||
|
LFF-DST4-S10S[G] |
|||
|
LFF-DSP-G09S[G] |
|||
|
LFF-DST8-G09S[G] |
|||
|
LFF-DST8-S10S[G] |
|||
|
LFF-DST4-G06S[G] |
|||
|
LFF-DST8-S08S[G] |
|||
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Glass Fillers+ ˘ § [G] |
MLTPL |
CHG |
ASME A112.18.1/CSA B125.1 |
| LFGF-W | |||
| LFGF-D | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
| Zhejiang IDC Fluid Control Co., Ltd C/O Ningbo IDC International Trading Co.,Ltd | |
| 15, Fl., Xingye Building | |
| No. 901 East Baizhang Road | |
| Ningbo City, Zhejiang 315000 | |
| China | |
| 86 574 2767 0666 | |
| Visit this company's website |
Facility : Zhejiang, China
| Product Type | Material Type | Trade Name | Product Standard |
Boiler Drain+ ˘ § |
MLTPL |
Ningbo IDC International Trading Co., LTD |
ASME A112.18.1/CSA B125.1 |
| 1BDA004 Heavy FIP 1/2" | 1BDA006 Heavy FIP 3/4" | 1BDAa04 VLV HEAVY BOILER DRAIN FIP 1/2"@ [G] | 1BDAa06 VLV HEAVY BOILER DRAIN FIP 3/4"@ [G] |
| 1BDAb04 VLV HEAVY BOILER DRAIN FIP 1/2" | 1BDAb06 VLV HEAVY BOILER DRAIN FIP 3/4" | 1BDB004 FIP 1/2" | 1BDB006 FIP 3/4" |
| 1BDBa04 VLV BOILER DRAIN FIP 1/2"@ [G] | 1BDBa06 VLV BOILER DRAIN FIP 3/4"@ [G] | 1BDBb04 VLV BOILER DRAIN FIP 1/2" | 1BDBb06 VLV BOILER DRAIN FIP 3/4" |
| 1BDC004 Male with Locknut 1/2" | 1BDC104 Male with Locknut 1/2" A | 1BDCa04 VLV BOILER DRAIN MALE WITH LOCKNUT 1/2"@ [G] | 1BDCb04 VLV BOILER DRAIN MALE WITH LOCKNUT 1/2" A@ [G] |
| 1BDCc04 VLV BOILER DRAIN MALE WITH LOCKNUT 1/2" | 1BDCd04 VLV BOILER DRAIN MALE WITH LOCKNUT 1/2" A | 1BDD004 Compression Connection 1/2" (5/8" O.D.) | 1BDDa04 BOILER DRAIN COMPRESSION CONNECTION 1/2{ (5/8" O.D.)@ [G] |
| 1BDDb04 BOILER DRAIN COMPRESSION CONNECTION 1/2" (5/8"O.D.) | 1BDG004 Heavy MIP 1/2" | 1BDG006 Heavy MIP 3/4" | 1BDGa04 VLV HEAVY BOILER DRAIN MIP 1/2"@ [G] |
| 1BDGa06 VLV HEAVYBOILER DRAIN MIP 3/4"@ [G] | 1BDGb04 VLV HEAVY BOILER DRAIN MIP 1/2" | 1BDGb06 VLV HEAVYBOILER DRAIN MIP 3/4" | 1BDH004 MIP 1/2” |
| 1BDH006 MIP 3/4" | 1BDHa04 VLV BOILER DRAIN MIP 1/2"@ [G] | 1BDHa06 VLV BOILER DRAIN MIP 3/4"@ [G] | 1BDHb04 VLV BOILER DRAIN MIP 1/2" |
| 1BDHb06 VLV BOILER DRAIN MIP 3/4" | 1BDJ004 Boiler Drain MIP 1/2" Slanting | 1BDJ006 Boiler Drain MIP 3/4" Slanting | 1BDJa04 BOILER DRAIN MIP 1/2" (SLANTING)@ [G] |
| 1BDJa06 BOILER DRAIN MIP 3/4" (SLANTING)@ [G] | 1BDJb04 BOILER DRAIN MIP 1/2" (SLANTING) | 1BDJb06 BOILER DRAIN MIP 3/4" (SLANTING) | 1BDK004 Cup to Hose 1/2" |
| 1BDK006 Cup to Hose 3/4" | 1BDKa04 1/2" Boiler Drain Cup to Hose@ [G] | 1BDKa06 3/4" Boiler Drain Cup to Hose@ [G] | 1BDKb04 1/2" Boiler Drain Cup to Hose |
| 1BDKb06 3/4" Boiler Drain Cup to Hose | 1BDL007 Fit to Hose 1/2" | 1BDL008 Fit to Hose 3/4" | 1BDL009 PEX 1/2" |
| 1BDLa07 1/2" Boiler Drain Fit to Hose@ [G] | 1BDLa08 3/4" Boiler Drain Fit to Hose@ [G] | 1BDLb07 1/2" Boiler Drain Fit to Hose | 1BDLb08 3/4" Boiler Drain Fit to Hose |
| 1BDMa09 Boiler Drain PEX 1/2"@ [G] | 1BDMb09 Boiler Drain PEX 1/2" | ||
@ Product also complies to NSF/ANSI 372.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Garden Valve+ ˘ § |
MLTPL |
Ningbo IDC International Trading Co., LTD |
ASME A112.18.1/CSA B125.1 |
| 1GDA006 Inverted 3/4" | 1GDB004 Bent Nose Brass 1/2" | 1GDB006 Bent Nose Brass 3/4" | 1GDB008 Bent Nose Brass 1" |
| 1GDC004 Bent Nose-Loose Key 1/2" | 1GDC006 Bent Nose-Loose Key 3/4" | 1GDC008 Bent Nose-Loose Key 1" | |
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Hose Bibb+ ˘ § |
MLTPL |
Ningbo IDC International Trading Co., LTD |
ASME A112.18.1/CSA B125.1 |
| 1BHA004 Brass Hose Bibb MIP 1/2" | 1BHA006 Brass Hose Bibb MIP 3/4" | 1BHB004 Heavy Hose Bibb MIP 1/2" | 1BHB006 Heavy Hose Bibb MIP 3/4" |
| 1BHC004 No Kink Brass Hose Bibb Compression 1/2" | 1BHD004 Quarter Turn Brass 1/2" | 1BHD006 Quarter Turn Brass 3/4" | 1BHE004 Quarter Turn No Kink 1/2" Cup or 3/4" Fitting |
| 1BHF004 Quarter Turn Hose Bibb No Kink MIP 1/2" | 1BHF006 Quarter Turn Hose Bibb No Kink MIP 3/4” | 1BHG004 No Kink Brass Hose Bibb MIP 1/2" | 1BHG006 No Kink Brass Hose Bibb MIP 3/4" |
| 1BHH004 Nose-Loose Key No Kink Brass Hose Bibb MIP 1/2" | 1BHH006 Nose-Loose Key No Kink Brass Hose Bibb MIP 3/4" | 1BHJ004 Ball Valve Type Hose Bibb MIP 1/2" | 1BHJ006 Ball Valve Type Hose Bibb MIP 3/4" |
| 1BHK004 Ball Valve Type Hose Bibb FIP 1/2" | 1BHK006 Ball Valve Type Hose Bibb FIP 3/4" | 1BHL004 Ball Valve Type Hose Bibb SOL 1/2" and 3/4" | 1BHM004 Quarter Turn Hose Bibb FIP 1/2" |
| 1BHM006 Quarter Turn Hose Bibb FIP 3/4" | 1BHN004 No Kink Brass Hose Bibb FIP 1/2" | 1BHN006 No Kink Brass Hose Bibb FIP 3/4" | 1BHP004 No Kink Brass Hose CUP 1/2" and 3/4" |
| 1BHQ004 Nose-Loose Key No Kink Brass Hose Bibb FIP 1/2" | 1BHQ006 Nose-Loose Key No Kink Brass Hose Bibb FIP 3/4" | 1BHR004 VLV QTR TRN NO KINK MIP 1/2" | 1BHR006 VLV QTR TRN NO KINK MIP 3/4" |
| 1BHS004 VLV QTR TRN NO KINK FIP 1/2" | 1BHS006 VLV QTR TRN NO KINK FIP 3/4" | 1BHT004 VLV QTR TRN HOSE BIB 1/2" | 1BHT006 VLV QTR TRN HOSE BIB 3/4" |
| 1BHU004 VLV QTR TRN NO KINK 1/2 Cup or 3/4 Fitting | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Sillcock+ ˘ § |
MLTPL |
Ningbo IDC International Trading Co., LTD |
ASME A112.18.1/CSA B125.1 |
| 1SCA004 Heavy Brass Sillcock 1/2" | 1SCA006 Heavy Brass Sillcock 3/4" | 1SCB004 Heavy Sillcock Solder 1/2" and 3/4" | 1SCC004 FIP Brass Sillcock 1/2" |
| 1SCC006 FIP Brass Sillcock 3/4" | 1SCD004 Solder Brass Sillcock 1/2" and 3/4" | 1SCJ004 Nose-Loose Key FIP Brass Sillcock 1/2" | 1SCJ006 Nose-Loose Key FIP Brass Sillcock 3/4" |
| 1SCK004 Nose-Loose Key FIP Brass Sillcock SOL 1/2" & 3/4" | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F. ˘ Product is authorized to bear the cNSF and/or the cNSFus Mark. § Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
| Zhejiang Mingdi Ceramic Cartridge Co., Ltd. | |
| Bingang Industrial Zone | |
| Shamen Town, Yuhuan County | |
| Zhejiang Province 317607 | |
| China | |
| 86 576 8735 9699 | |
| Visit this company's website |
Facility : Zhejiang Province, China
| Product Type | Material Type | Trade Name | Product Standard |
Faucet Cartridge+ ˘ § [G] |
MLTPL |
Mingdi |
ASME A112.18.1/CSA B125.1 |
| D25G-3025K | |||
| D25P-2003F | |||
| D25P-2025K | |||
| D25P-2026 | |||
| D25P-2158 | |||
| D35G-3012 | |||
| D35G-3015K | |||
| D35G-3015T | |||
| D35G-3015Y | |||
| D35G-4015S | |||
| D35P-1012 | |||
| D35P-1012K | |||
| D35P-2002F | |||
| D35P-2012 | |||
| D35P-2012T | |||
| D35P-2015K | |||
| D35P-2015R | |||
| D35P-2015Y | |||
| D40G-3016K | |||
| D40G-3016T | |||
| D40G-3016Y | |||
| D40G-3018 | |||
| D40G-4016S | |||
| D40P-1018 | |||
| D40P-1018K | |||
| D40P-1018T | |||
| D40P-2001F | |||
| D40P-2016K | |||
| D40P-2017K | |||
| D40P-2017R | |||
| D40P-2017T | |||
| D40P-2017Y | |||
| D40P-2018 | |||
| D40P-2188 | |||
+ Material complies with NSF/ANSI 61 health effects requirements when tested at 73° F.
˘ Product is authorized to bear the cNSF and/or the cNSFus Mark.
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the
manufacturer's instructions and the requirements of the latest edition of the Uniform
Plumbing Code™.
[G] Product complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content
requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and
Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January
2014.
|
|||
| Zhongshan Saint-Germain Faucet Co., Ltd. | |
| No. 10, Chengye Road | |
| Dacen Industrial Zone, Huangpu Town | |
| Zhongshan, Guangdong 528429 | |
| China | |
| 86 760 3223444 | |
| Visit this company's website |
Facility : Zhongshan, Guangdong, China
| Product Type | Material Type | Trade Name | Product Standard |
Shower Hoses§ |
MLTPL |
Zhongshan Saint-Germain Faucet Co., Ltd. |
ASME A112.18.1/CSA B125.1 |
|
Brass Shower Hose |
|||
| SG14I1000 | SG14I1500 | SG14I2000 | SG14I500 |
| SG14J1500 | SG14J1700 | SG14J1800 | SG14J2000 |
| SG14K1500 | SG14K1700 | SG14K1800 | SG14K2000 |
| SG14L1500 | SG14L1700 | SG14L1800 | SG14L2000 |
|
Stainless Steel Shower Hose |
|||
| SG14E1000 | SG14E1500 | SG14E2000 | SG14E500 |
| SG14F1000 | SG14F1500 | SG14F2000 | SG14F500 |
| SG14G1500 | SG14G1700 | SG14G1800 | SG14G2000 |
| SG14H1500 | SG14H1700 | SG14H1800 | SG14H2000 |
§ Product is Certified to the Uniform Plumbing Code™. Installation in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code™. |
|||
Number of matching Manufacturers is 26
Number of matching Products is 931
Processing time was 1 seconds