Understanding FSSC Partial Remote Audit Process

August 18, 2020

Learn about the audit requirements, process and items that can be reviewed in the FSSC Partial Remote Audit.

Remote Audit Risk Assessment Evaluation

To determine if a remote audit is a viable solution, an assessment is sent to the site prior to audit scheduling to ascertain:

Does the site permit remote audit activity?
What information and communication technologies (ICTs) will be utilized?
Does the site have the ability to provide a representative capable of communicating in the same language as the auditor?
Can both the site and certification body (CB) perform remote activities using an agreed upon ICTs?

A Supply Chain Food Safety Client Information form is then completed, reviewed and approved by the technical manager before scheduling can proceed. If not approved, a full on-site audit will be required.

Step 1: Remote Audit

Focus on ISO 22000 standard
Management/key personnel interviews
Trace exercise

If any non-conformances (NCs) are issued during the remote audit, a normal response time is applied to closing the NCs. The auditor will verify the remote audit NC implementation during the on-site audit.

Step 2: On-site Audit

Implementation/verification of food safety management system (including HACCP).
Prerequisite programs (PRPs)
Physical inspection of the production process
Any remaining requirements not covered in the remote audit.

Requirements of Partial Remote Audits

Partial remote audits are voluntary, not mandatory.
The remote audit must occur first (unless as part of an unannounced surveillance audit)
Maximum time between the remote audit and on-site audit cannot exceed 30 calendar days
- 90 days allowed in case of serious events (FSSC provides examples in Annex 9 Appendix 1)
The on-site audit cannot be less than one day and must be at least 50% of audit duration.
Unannounced surveillance audits may use a two-step process, but the on-site portion will be conducted first with the remote portion completed within 48 hours of the on-site audit.
Non-conformances may be issued during both audits, with normal response time applied to both audits separately.
- NC raised during the first audit may have grading elevated if more evidence is found during the second audit

Visit Link