Plumbing Fixtures and Fittings Testing and Certification
May 9, 2025
Are you a manufacturer seeking compliance for your plumbing products? Proper testing, inspection, and certification are crucial for market entry, whether manufacturing faucets and taps, drinking water fountains, or fixtures and fittings. With our expertise, we help manufacturers meet standards and ensure their products are safer and more reliable.
Are you a manufacturer seeking compliance for your plumbing products? Proper testing, inspection, and certification are crucial for market entry, whether manufacturing faucets and taps, drinking water fountains, or fixtures and fittings. With our expertise, we help manufacturers meet standards and ensure their products are safer and more reliable.
Contact us using the form below if you’re interested in testing or certification to a specific standard listed or for a custom project.
| Service/Standard Name | Description |
| ACS | Attestation de Conformité Sanitaire (France) |
| ANSI/ASQ Z1.4:2003 (R2018) | Sampling Procedures and Tables for Inspection by Attributes |
| ANSI/ASSE 1001:2017 | Performance Requirements for Atmospheric Type Vacuum Breakers |
| ANSI/ASSE 1002:2008 | Anti-Siphon Fill Valves for Water Closet Tanks |
| ANSI/ASSE 1003:2009 | Performance Requirements for Water Pressure Reducing Valves for Domestic Water Distribution Systems |
| ANSI/ASSE 1010:2004 | Performance Requirements for Water Hammer Arresters |
| ANSI/ASSE 1013:2011 | Performance Requirements for Reduced-Pressure Principle Backflow Preventers and Reduced-Pressure Fire Protection Principle Backflow Preventers |
| ANSI/ASSE 1014:2020 | Performance Requirements for Backflow Prevention Devices for Hand-Held Showers |
| ANSI/ASSE 1015:2011 | Performance Requirements for Double Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies |
| ANSI/ASSE 1017:2009 | Temperature Actuated Mixing Valves for Hot Water Distribution Systems |
| ANSI/ASSE 1018:2001 (R2021) | Trap Seal Primer Valves Potable Water Supplied |
| ANSI/ASSE 1019:2011 (R2016) | Performance Requirements for Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type |
| ANSI/ASSE 1020:2004 | Pressure Vacuum Breaker Assembly |
| ANSI/ASSE 1022:2017 | Performance Requirements for Pressure Vacuum Breaker Assemblies |
| ANSI/ASSE 1024:2004 | Dual Check Backflow Preventers |
| ANSI/ASSE 1024:2017 | Performance Requirements for Dual Check Backflow Preventers |
| ANSI/ASSE 1035:2008 | Laboratory Faucet Backflow Preventers |
| ANSI/ASSE 1037:1990 | Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures |
| ANSI/ASSE 1047:2011 | Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies |
| ANSI/ASSE 1048:2011 | Double Check Detector Fire Protection Backflow Prevention Assemblies |
| ANSI/ASSE 1052:2016 | Hose Connection Backflow Preventers |
| ANSI/ASSE 1056:2013 (R2021) | Spill Resistant Vacuum Breaker |
| ANSI/ASSE 1060:2017 | Outdoor Enclosures for Backflow Prevention Assemblies |
| ANSI/ASSE 1061:2015 | Performance Requirements for Push-Fit Fittings |
| ANSI/ASSE 1070:2015 or 2004? | Water Temperature Limiting Devices |
| ANSI/ISA-75.02:2008 | Control Valve Capacity Test Procedures |
| ANSI/NFPA Z223.1/54:2012 | National Fuel Gas Code |
| AS 5200.037.2:2008 (R2016) | Plumbing and Drainage Products- Flow Controllers for Use With Heated or Cold Water Systems |
| AS/NZS 3499:2006(R2016) | Water supply - Flexible hose assemblies |
| AS/NZS 3707:2001 (R2017) | Method for Testing Pressure Cycling Resistance of Pipes and Fittings |
| AS/NZS 3718:2005 | Water supply – Tap ware |
| ASME A112.1.2:2012 (R2017) | Air Gaps in Plumbing Fixtures |
| ASME A112.1.3:2000 (R2019) | Air Gap Fittings for Use with Plumbing Fixtures, Appliances and Appurtenances |
| ASME A112.14.3:2018 | Grease Interceptors |
| ASME A112.14.4:2001 (R2017) | Grease Removal Devices |
| ASME A112.18.1/CSA B125.1:2018 | Plumbing Supply Fittings – Except High-Efficiency Shower Heads |
| ASME A112.18.2/CSA B125.2:2020 | Plumbing Waste Fittings |
| ASME A112.18.3:2002 (R2017) | Performance Requirements for Backflow Devices And Systems In Plumbing Fixture Fittings |
| ASME A112.18.6/CSA B125.6:2017 | Flexible Water Connectors |
| ASME A112.19.10:2017 | Dual Flush Devices for Water Closets |
| ASME A112.19.12:2014 (R2019) | Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting lavatory, Sink and Shampoo Bowl Carrier Systems and Drain Waste Systems |
| ASME A112.19.14:2013 (R2018) | Six-Liter Water Closets Equipped with a Dual Flushing Device |
| ASME A112.19.19:2016 (R2021) | Vitreous China Nonwater Urinals |
| ASME A112.19.2/CSA B45.1:2018 | Ceramic Plumbing Fixtures – incorporates ASME A112.19.6 and ASME A112.19.9. |
| ASME A112.19.3/CSA B45.4:2017 | Stainless Steel Plumbing Fixtures |
| ASME A112.19.5/CSA B45.15:2017 | Flush valves and spuds for water closets, urinals, and tanks |
| ASME A112.21.3:1985 (R2017) | Hydrants for Utility and Maintenance Use |
| ASME A112.3.1:2007 (R2017) | Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above and Below Ground – except Clause 3.5. |
| ASME A112.3.4/CSA B45.9:2018 | Macerating toilet systems and waste-pumping systems for plumbing fixtures |
| ASME A112.36.2M:1991 (R2017) | Cleanouts |
| ASME A112.4.14/CSA B125.14:2017 | Manually Operated Quarter-Turn Shutoff Valves for Use in Plumbing Systems |
| ASME A112.6.3:2016 or 2001 (R2007)? | Floor and Trench Drains |
| ASME A112.6.4 2012 | Roof, Deck, and Balcony Drains |
| ASME ASTM PTC19.2:2010 (R2020) | Pressure Measurement |
| ASME ASTM PTC19.5:2004 (R2013) | Flow measurement |
| ASME B1.20.1:2013 (R2018) | Pipe Threads, General Purpose (Inch) |
| ASME B1.20.3:1976 (R2018) | Dryseal Pipe Threads, Inch |
| ASME B16.18:2018 | Cast Copper Alloy Solder Joint Pressure Fittings |
| ASME B16.22:2018 | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings |
| ASME B16.23:2011 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV |
| ASME B16.24:2011 | Cast Copper Alloy Pipe Flanges and Flanged Fittings Classes 150, 300, 400, 600, 900, 1500, and 2500 |
| ASME B16.29:2012 | Wrought Copper and Wrought Copper Alloy Solder — Joint Drainage Fittings — DWV |
| ASME B16.3:2011 | Malleable Iron Threaded Fittings: Classes 150 and 300 |
| ASME B16.51:2013 | Copper and Copper Alloy Press-Connect Pressure Fittings |
| ASME MFC-14M:2003 (R2018) | Measurement of Fluid Flow Using Small Bore Precision Orifice m |
| ASME/ANSI B36.19m:2018 | Stainless Steel Pipe |
| ASSE 1032:2004 (R2021) | Performance Requirements for Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers - Post Mix Type |
| ASSE 1062:2017 | Performance Requirements for Temperature Actuated Flow Reduction (TAFR) Valves for Individual Supply Fittings |
| ASSE 1069:2020 | Performance Requirements for Automatic Temperature Control Mixing Valves |
| ASSE/ANSI 1011 (2004) | Water-Closet Flush Tank Ball Cocks Performance Requirements for Hose Connection Vacuum Breakers |
| ASSE/ASME/CSA 1016/A112.1016/B125.16:2017 | Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations |
| ASTM A1045:2010 (R2021) | Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Water Closets to Sanitary Drainage System |
| ASTM A126:2004 (R2019) | Standard Specification for Gray Iron Castings for Valves, Flanges & Pipe Fittings |
| ASTM A197/A197M:2000 (R2019) | Specification for Cupola Malleable Iron |
| ASTM A234/A234M:2013 or 13E1? | Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| ASTM A312/A312M:2014 | Specification for Seamless, Welded, and Heavily Cold-Worked Austenitic Stainless Steel Pipes |
| ASTM A395/A395M:1999 (R2018) | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A48/A48M:2012 (R2021) | Standard Specification for Gray Iron Castings |
| ASTM A53/A53M:2018 | Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A820/A820M:2011 | Steel Fibers for Fiber Reinforced Concrete |
| ASTM A888:2013 or -17? | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
| ASTM B125.3 CSA B125.3 (2018) | Plumbing fittings |
| ASTM B16.18 ASME B16.18 (2012) | Cast Copper Alloy Solder Joint Pressure Fittings |
| ASTM B16.22 ASME B16.22 (2013) | Wrought Copper and Copper Alloy Solder Joint Pressure Fittings |
| ASTM B16.26 ASME B16.26 (2013) | Cast Copper Alloy Fittings for Flared Copper Tubes |
| ASTM B280:2020 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigerated Field Service |
| ASTM B571:2018 | Standard Practice for Qualitative Adhesion Testing of Metallic Coatings |
| ASTM B75/B75M:2011 | Specification for Seamless Copper Tube |
| ASTM B88:2020 | Specification for Seamless Copper Water Tube |
| ASTM C1227:2013 | Precast Concrete Septic Tanks |
| ASTM C1277:2018 | Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings |
| ASTM C581:2008 or 03(2008)e1? | Chemical Resistance of Thermosetting Resins Used in Glass-Fiber Reinforced Structures |
| ASTM D1384:2005 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM F2324:2013 (R2019) | Standard test method for pre-rinse spray valves |
| ASTM/ASME B1.20.7:1991 (R2018) | Hose Coupling Screw Threads, Inch |
| BS EN 1111:2017 | Sanitary tapware. Thermostatic mixing valves (PN 10). General technical specification (TMV 2) |
| BS EN 1287:2017 | Sanitary tapware. Low-pressure thermostatic mixing valves. General technical specification (TMV 2) |
| CISPI 310:2018 | Specification for Coupling for Use in Connection with Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
| CSA B356:2010(R2020) | Water pressure-reducing valves for domestic water supply systems |
| CSA Z240:2014 (R2020) | Plumbing requirements for recreational vehicles |
| EPA WaterSense Lavatory: 2007 | Specifications for high-efficiency lavatory faucets |
| EPA WaterSense PRSV: Withdrawn (2013) | Specification for commercial pre-rinse spray valves |
| IAPMO PS 117-2019 | Press and Nail Connections |
| IAPMO Z1001-2016 | Prefabricated Gravity Grease Interceptors |
| IAPMO Z1157-2014e1 | Ball Valves |
| IAPMO/ANSI Z1000:2013 | Prefabricated Septic Tanks |
| NSF P374 | Air Duct Thermal Efficiency |
| NSF REG4 1+ | Certification for UK Plumbing Products |
| NSF REG4 S3 | Certification for UK Plumbing Products |
| NSF/ANSI/CAN 61 | Drinking Water System Components - Health Effects |
| NSF/ANSI 24:2016 | Plumbing systems components for recreational vehicles |
| NSF/ANSI/CAN 372 | Drinking Water System Components – Lead Content |
| NSF/ANSI 468 | Plumbing Supply Component for Export |
| NSF/ANSI 5 | Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment |
| PDI G101 (2017) | Testing and Rating Procedure for Hydro Mechanical Grease Interceptors |
| PDI G102:2009 | Testing and Certification for Grease Interceptors with FOG Sensing and Alarm Devices |
| TMV 3 | Performance specification D 08 for valves used in high-risk areas of health care premises |
| UBA Conformity Attestation/KTW-BWGL | Hygiene Requirements for Products and Materials in Contact With Drinking Water (Germany) |
| UK G3 Building Regulations | Assessment to UK G3 Building Regulations |
| WRAS1611.8:1993 Issue 2 | Visual Inspection- Seal to be Readily Renewable |
| WRAS2111.1:1998 Issue 3 | Effect Upon Water Quality |
| WRAS2114.2:1999 Issue 4 | Opacity |
| WRAS2211.3:1993 Issue 3 | Contamination-Mixing of Primary and Secondary |
| WRAS2212.6:2000 Issue 4 | Vacuum Test (Derived from BS 5412:1996 Clause 13) |
| WRAS2213.18:2000 Issue 1 | Dimensional |
| WRAS2213.19:2000 Issue 1 | Dimensional |
| WRAS5011.1:1998 Issue 3 | Measurement of Linear Dimensions |
| WRAS6001.1:2000 Issue 7 | Marking for Identification |
How NSF Can Help You
Get in touch to find out how we can help you and your business thrive.
What’s New with NSF
NSF Issues First-Ever MSC Certification for an Eel Fishery to Perupez S.A.C. and Sakana del Peru
June 19, 2026Third-party certification plays a key role in independently verifying the sustainability of seafood operations.
iNADO Partners with NSF to Support Members and Athletes
May 27, 2026iNADO is pleased to welcome NSF’s expertise and experience in support of its members and the athletes they serve
NSF Ends UK’s Three-Year Testing Gap with REG 31 Testing Designation
May 20, 2026NSF’s Oakdale laboratory becomes the UK’s sole facility offering comprehensive BS 6920 and REG 31 testing, closing a critical drinking water safety gap.